ideapad: fix the delay when controlling brightness #29

abdelli · 2013-03-05T14:29:00Z

No description provided.

Reflow two lines to meet the 80 characters per line limit. Fixes the following checkpatch warnings: WARNING: line over 80 characters torvalds#29: FILE: staging/iio/gyro/adxrs450_core.c:29: + * @reg_address: the address of the lower of the two registers,which should be an even address, WARNING: line over 80 characters torvalds#81: FILE: staging/iio/gyro/adxrs450_core.c:81: + * @reg_address: the address of the lower of the two registers,which should be an even address, Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Occasionally, we would run into this warning: iwlwifi 0000:02:00.0: U iwl_mvm_protect_session extend 0x2601: only 200 ms left iwlwifi 0000:02:00.0: U iwl_mvm_remove_time_event Removing TE 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (torvalds#29), seq: 0x0925, 60 bytes at 37[5]:9 iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Attempting to send sync command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_pcie_send_hcmd_sync Setting HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: I iwl_pcie_enqueue_hcmd Sending command TIME_EVENT_CMD (torvalds#29), seq: 0x0926, 60 bytes at 38[6]:9 iwlwifi 0000:02:00.0: U iwl_mvm_time_event_response TIME_EVENT_CMD response - UID = 0x2601 iwlwifi 0000:02:00.0: I iwl_pcie_hcmd_complete Clearing HCMD_ACTIVE for command TIME_EVENT_CMD iwlwifi 0000:02:00.0: U iwl_mvm_rx_time_event_notif Time event notification - UID = 0x2701 action 1 wlan0: associate with 00:0a:b8:55:a8:30 (try 2/3) ------------[ cut here ]------------ WARNING: at drivers/net/wireless/iwlwifi/mvm/time-event.c:269 iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm]() Modules linked in: [...] Call Trace: [<c1046e42>] warn_slowpath_common+0x72/0xa0 [<c1046e92>] warn_slowpath_null+0x22/0x30 [<f8cad913>] iwl_mvm_time_event_send_add+0x163/0x1a0 [iwlmvm] [<f8cadead>] iwl_mvm_protect_session+0xcd/0x1c0 [iwlmvm] [<f8ca2087>] iwl_mvm_mac_mgd_prepare_tx+0x67/0xa0 [iwlmvm] [<f882a130>] ieee80211_sta_work+0x8f0/0x1070 [mac80211] The reason is a problem with asynchronous vs. synchronous commands, what happens here is the following: * TE 0x2601 is removed, the TIME_EVENT_CMD for that is async * a new TE (will be 0x2701) is created, the TIME_EVENT_CMD for that is sync and also uses a notification wait for the response (to avoid another race condition) * the response for the TE 0x2601 removal comes from the firmware, and is handled by the notification wait handler that's really waiting for the second response, but can't tell the difference, we therefore see the message "TIME_EVENT_CMD response - UID = 0x2601" instead of "TIME_EVENT_CMD response - UID = 0x2701". Fix this issue by making the TE removal synchronous as well, this means that we wait for the response to that command first, before there's any chance of sending a new one. Also, to detect such issues more easily in the future, add a warning to the notification handler that detects them. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>

destroy_workqueue() performs several sanity checks before proceeding with destruction of a workqueue. One of the checks verifies that refcnt of each pwq (pool_workqueue) is over 1 as at that point there should be no in-flight work items and the only holder of pwq refs is the workqueue itself. This worked fine as a workqueue used to hold only one reference to its pwqs; however, since 4c16bd3 ("workqueue: implement NUMA affinity for unbound workqueues"), a workqueue may hold multiple references to its default pwq triggering this sanity check spuriously. Fix it by not triggering the pwq->refcnt assertion on default pwqs. An example spurious WARN trigger follows. WARNING: at kernel/workqueue.c:4201 destroy_workqueue+0x6a/0x13e() Hardware name: 4286C12 Modules linked in: sdhci_pci sdhci mmc_core usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video Pid: 361, comm: umount Not tainted 3.9.0-rc5+ torvalds#29 Call Trace: [<c04314a7>] warn_slowpath_common+0x7c/0x93 [<c04314e0>] warn_slowpath_null+0x22/0x24 [<c044796a>] destroy_workqueue+0x6a/0x13e [<c056dc01>] ext4_put_super+0x43/0x2c4 [<c04fb7b8>] generic_shutdown_super+0x4b/0xb9 [<c04fb848>] kill_block_super+0x22/0x60 [<c04fb960>] deactivate_locked_super+0x2f/0x56 [<c04fc41b>] deactivate_super+0x2e/0x31 [<c050f1e6>] mntput_no_expire+0x103/0x108 [<c050fdce>] sys_umount+0x2a2/0x2c4 [<c050fe0e>] sys_oldumount+0x1e/0x20 [<c085ba4d>] sysenter_do_call+0x12/0x38 tj: Rewrote description. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com>

Otherwise we get a deadlock like below: [ 1044.042749] BUG: scheduling while atomic: ksoftirqd/21/141/0x00010003 [ 1044.042752] INFO: lockdep is turned off. [ 1044.042754] Modules linked in: [ 1044.042757] Pid: 141, comm: ksoftirqd/21 Tainted: G W 3.4.0-rc2-rt3-23676-ga723175-dirty torvalds#29 [ 1044.042759] Call Trace: [ 1044.042761] <IRQ> [<ffffffff8107d8e5>] __schedule_bug+0x65/0x80 [ 1044.042770] [<ffffffff8168978c>] __schedule+0x83c/0xa70 [ 1044.042775] [<ffffffff8106bdd2>] ? prepare_to_wait+0x32/0xb0 [ 1044.042779] [<ffffffff81689a5e>] schedule+0x2e/0xa0 [ 1044.042782] [<ffffffff81071ebd>] hrtimer_wait_for_timer+0x6d/0xb0 [ 1044.042786] [<ffffffff8106bb30>] ? wake_up_bit+0x40/0x40 [ 1044.042790] [<ffffffff81071f20>] hrtimer_cancel+0x20/0x40 [ 1044.042794] [<ffffffff8111da0c>] perf_swevent_cancel_hrtimer+0x3c/0x50 [ 1044.042798] [<ffffffff8111da31>] task_clock_event_stop+0x11/0x40 [ 1044.042802] [<ffffffff8111da6e>] task_clock_event_del+0xe/0x10 [ 1044.042805] [<ffffffff8111c568>] event_sched_out+0x118/0x1d0 [ 1044.042809] [<ffffffff8111c649>] group_sched_out+0x29/0x90 [ 1044.042813] [<ffffffff8111ed7e>] __perf_event_disable+0x18e/0x200 [ 1044.042817] [<ffffffff8111c343>] remote_function+0x63/0x70 [ 1044.042821] [<ffffffff810b0aae>] generic_smp_call_function_single_interrupt+0xce/0x120 [ 1044.042826] [<ffffffff81022bc7>] smp_call_function_single_interrupt+0x27/0x40 [ 1044.042831] [<ffffffff8168d50c>] call_function_single_interrupt+0x6c/0x80 [ 1044.042833] <EOI> [<ffffffff811275b0>] ? perf_event_overflow+0x20/0x20 [ 1044.042840] [<ffffffff8168b970>] ? _raw_spin_unlock_irq+0x30/0x70 [ 1044.042844] [<ffffffff8168b976>] ? _raw_spin_unlock_irq+0x36/0x70 [ 1044.042848] [<ffffffff810702e2>] run_hrtimer_softirq+0xc2/0x200 [ 1044.042853] [<ffffffff811275b0>] ? perf_event_overflow+0x20/0x20 [ 1044.042857] [<ffffffff81045265>] __do_softirq_common+0xf5/0x3a0 [ 1044.042862] [<ffffffff81045c3d>] __thread_do_softirq+0x15d/0x200 [ 1044.042865] [<ffffffff81045dda>] run_ksoftirqd+0xfa/0x210 [ 1044.042869] [<ffffffff81045ce0>] ? __thread_do_softirq+0x200/0x200 [ 1044.042873] [<ffffffff81045ce0>] ? __thread_do_softirq+0x200/0x200 [ 1044.042877] [<ffffffff8106b596>] kthread+0xb6/0xc0 [ 1044.042881] [<ffffffff8168b97b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 1044.042886] [<ffffffff8168d994>] kernel_thread_helper+0x4/0x10 [ 1044.042889] [<ffffffff8107d98c>] ? finish_task_switch+0x8c/0x110 [ 1044.042894] [<ffffffff8168b97b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 1044.042897] [<ffffffff8168bd5d>] ? retint_restore_args+0xe/0xe [ 1044.042900] [<ffffffff8106b4e0>] ? kthreadd+0x1e0/0x1e0 [ 1044.042902] [<ffffffff8168d990>] ? gs_change+0xb/0xb Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1341476476-5666-1-git-send-email-yong.zhang0@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

As the new x86 CPU bootup printout format code maintainer, I am taking immediate action to improve and clean (and thus indulge my OCD) the reporting of the cores when coming up online. Fix padding to a right-hand alignment, cleanup code and bind reporting width to the max number of supported CPUs on the system, like this: [ 0.074509] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.644008] smpboot: Booting Node 1, Processors: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 OK [ 1.245006] smpboot: Booting Node 2, Processors: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 OK [ 1.864005] smpboot: Booting Node 3, Processors: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 OK [ 2.489005] smpboot: Booting Node 4, Processors: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 OK [ 3.093005] smpboot: Booting Node 5, Processors: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 OK [ 3.698005] smpboot: Booting Node 6, Processors: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 OK [ 4.304005] smpboot: Booting Node 7, Processors: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 OK [ 4.961413] Brought up 64 CPUs and this: [ 0.072367] smpboot: Booting Node 0, Processors: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 OK [ 0.686329] Brought up 8 CPUs Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Libin <huawei.libin@huawei.com> Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>

…bles the feature to fix an oops commit 1a3a026 upstream. Echo vendor and product number of a non usb-storage device to usb-storage driver's new_id, then plug in the device to host and you will find following oops msg, the root cause is usb_stor_probe1() refers invalid id entry if giving a dynamic id, so just disable the feature. [ 3105.018012] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC [ 3105.018062] CPU 0 [ 3105.018075] Modules linked in: usb_storage usb_libusual bluetooth dm_crypt binfmt_misc snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep hp_wmi ppdev sparse_keymap snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device psmouse snd serio_raw tpm_infineon soundcore i915 snd_page_alloc tpm_tis parport_pc tpm tpm_bios drm_kms_helper drm i2c_algo_bit video lp parport usbhid hid sg sr_mod sd_mod ehci_hcd uhci_hcd usbcore e1000e usb_common floppy [ 3105.018408] [ 3105.018419] Pid: 189, comm: khubd Tainted: G I 3.2.0-rc7+ torvalds#29 Hewlett-Packard HP Compaq dc7800p Convertible Minitower/0AACh [ 3105.018481] RIP: 0010:[<ffffffffa045830d>] [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20 [usb_storage] [ 3105.018536] RSP: 0018:ffff880056a3d830 EFLAGS: 00010286 [ 3105.018562] RAX: ffff880065f4e648 RBX: ffff88006bb28000 RCX: 0000000000000000 [ 3105.018597] RDX: ffff88006f23c7b0 RSI: 0000000000000001 RDI: 0000000000000206 [ 3105.018632] RBP: ffff880056a3d900 R08: 0000000000000000 R09: ffff880067365000 [ 3105.018665] R10: 00000000000002ac R11: 0000000000000010 R12: ffff6000b41a7340 [ 3105.018698] R13: ffff880065f4ef60 R14: ffff88006bb28b88 R15: ffff88006f23d270 [ 3105.018733] FS: 0000000000000000(0000) GS:ffff88007a200000(0000) knlGS:0000000000000000 [ 3105.018773] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 3105.018801] CR2: 00007fc99c8c4650 CR3: 0000000001e05000 CR4: 00000000000006f0 [ 3105.018835] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3105.018870] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 3105.018906] Process khubd (pid: 189, threadinfo ffff880056a3c000, task ffff88005677a400) [ 3105.018945] Stack: [ 3105.018959] 0000000000000000 0000000000000000 ffff880056a3d8d0 0000000000000002 [ 3105.019011] 0000000000000000 ffff880056a3d918 ffff880000000000 0000000000000002 [ 3105.019058] ffff880056a3d8d0 0000000000000012 ffff880056a3d8d0 0000000000000006 [ 3105.019105] Call Trace: [ 3105.019128] [<ffffffffa0458cd4>] storage_probe+0xa4/0xe0 [usb_storage] [ 3105.019173] [<ffffffffa0097822>] usb_probe_interface+0x172/0x330 [usbcore] [ 3105.019211] [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0 [ 3105.019243] [<ffffffff815fdd43>] __device_attach+0x73/0x90 [ 3105.019272] [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110 [ 3105.019303] [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0 [ 3105.019334] [<ffffffff815fd6c7>] device_attach+0xf7/0x120 [ 3105.019364] [<ffffffff815fc905>] bus_probe_device+0x45/0x80 [ 3105.019396] [<ffffffff815f98a6>] device_add+0x876/0x990 [ 3105.019434] [<ffffffffa0094e42>] usb_set_configuration+0x822/0x9e0 [usbcore] [ 3105.019479] [<ffffffffa00a3492>] generic_probe+0x62/0xf0 [usbcore] [ 3105.019518] [<ffffffffa0097a46>] usb_probe_device+0x66/0xb0 [usbcore] [ 3105.019555] [<ffffffff815fda67>] driver_probe_device+0x257/0x3b0 [ 3105.019589] [<ffffffff815fdd43>] __device_attach+0x73/0x90 [ 3105.019617] [<ffffffff815fdcd0>] ? __driver_attach+0x110/0x110 [ 3105.019648] [<ffffffff815fb93c>] bus_for_each_drv+0x9c/0xf0 [ 3105.019680] [<ffffffff815fd6c7>] device_attach+0xf7/0x120 [ 3105.019709] [<ffffffff815fc905>] bus_probe_device+0x45/0x80 [ 3105.021040] usb usb6: usb auto-resume [ 3105.021045] usb usb6: wakeup_rh [ 3105.024849] [<ffffffff815f98a6>] device_add+0x876/0x990 [ 3105.025086] [<ffffffffa0088987>] usb_new_device+0x1e7/0x2b0 [usbcore] [ 3105.025086] [<ffffffffa008a4d7>] hub_thread+0xb27/0x1ec0 [usbcore] [ 3105.025086] [<ffffffff810d5200>] ? wake_up_bit+0x50/0x50 [ 3105.025086] [<ffffffffa00899b0>] ? usb_remote_wakeup+0xa0/0xa0 [usbcore] [ 3105.025086] [<ffffffff810d49b8>] kthread+0xd8/0xf0 [ 3105.025086] [<ffffffff81939884>] kernel_thread_helper+0x4/0x10 [ 3105.025086] [<ffffffff8192a8c0>] ? _raw_spin_unlock_irq+0x50/0x80 [ 3105.025086] [<ffffffff8192b1b4>] ? retint_restore_args+0x13/0x13 [ 3105.025086] [<ffffffff810d48e0>] ? __init_kthread_worker+0x80/0x80 [ 3105.025086] [<ffffffff81939880>] ? gs_change+0x13/0x13 [ 3105.025086] Code: 00 48 83 05 cd ad 00 00 01 48 83 05 cd ad 00 00 01 4c 8b ab 30 0c 00 00 48 8b 50 08 48 83 c0 30 48 89 45 a0 4c 89 a3 40 0c 00 00 <41> 0f b6 44 24 10 48 89 55 a8 3c ff 0f 84 b8 04 00 00 48 83 05 [ 3105.025086] RIP [<ffffffffa045830d>] usb_stor_probe1+0x2fd/0xc20 [usb_storage] [ 3105.025086] RSP <ffff880056a3d830> [ 3105.060037] hub 6-0:1.0: hub_resume [ 3105.062616] usb usb5: usb auto-resume [ 3105.064317] ehci_hcd 0000:00:1d.7: resume root hub [ 3105.094809] ---[ end trace a7919e7f17c0a727 ]--- [ 3105.130069] hub 5-0:1.0: hub_resume [ 3105.132131] usb usb4: usb auto-resume [ 3105.132136] usb usb4: wakeup_rh [ 3105.180059] hub 4-0:1.0: hub_resume [ 3106.290052] usb usb6: suspend_rh (auto-stop) [ 3106.290077] usb usb4: suspend_rh (auto-stop) Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

These changes correct the following issues with jumbo frames on the stmmac driver: 1) The Synopsys EMAC can be configured to support different FIFO sizes at core configuration time. There's no way to query the controller and know the FIFO size, so the driver needs to get this information from the device tree in order to know how to correctly handle MTU changes and setting up dma buffers. The default max-frame-size is as currently used, which is the size of a jumbo frame. 2) The driver was enabling Jumbo frames by default, but was not allocating dma buffers of sufficient size to handle the maximum possible packet size that could be received. This led to memory corruption since DMAs were occurring beyond the extent of the allocated receive buffers for certain types of network traffic. kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 563 Comm: sockperf Not tainted 3.13.0-rc6-01523-gf7111b9 #31 task: ef35e580 ti: ef252000 task.ti: ef252000 PC is at skb_panic+0x60/0x64 LR is at skb_panic+0x60/0x64 pc : [<c03c7c3c>] lr : [<c03c7c3c>] psr: 60000113 sp : ef253c18 ip : 60000113 fp : 00000000 r10: ef3a5400 r9 : 00000ebc r8 : ef3a546c r7 : ee59f000 r6 : ee59f084 r5 : ee59ff40 r4 : ee59f140 r3 : 000003e2 r2 : 00000007 r1 : c0b9c420 r0 : 0000007d Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2e8ac04a DAC: 00000015 Process sockperf (pid: 563, stack limit = 0xef252248) Stack: (0xef253c18 to 0xef254000) 3c00: 00000ebc ee59f000 3c20: ee59f084 ee59ff40 ee59f140 c04a9cd8 ee8c50c0 00000ebc ee59ff40 00000000 3c40: ee59f140 c02d0ef0 00000056 ef1eda80 ee8c50c0 00000ebc 22bbef29 c0318f8c 3c60: 00000056 ef3a547c ffe2c716 c02c9c90 c0ba1298 ef3a5838 ef3a5838 ef3a5400 3c80: 000020c0 ee573840 000055cb ef3f2050 c053f0e0 c0319214 22b9b085 22d92813 3ca0: 00001c80 004b8e00 ef3a5400 ee573840 ef3f2064 22d92813 ef3f2064 000055cb 3cc0: ef3f2050 c031a19c ef252000 00000000 00000000 c0561bc0 00000000 ff00ffff 3ce0: c05621c0 ef3a5400 ef3f2064 ee573840 00000020 ef3f2064 000055cb ef3f2050 3d00: c053f0e0 c031cad0 c053e740 00000e60 00000000 00000000 ee573840 ef3a5400 3d20: ef0a6e00 00000000 ef3f2064 c032507c 00010000 00000020 c0561bc0 c0561bc0 3d40: ee599850 c032799c 00000000 ee573840 c055a380 ef3a5400 00000000 ef3f2064 3d60: ef3f2050 c032799c 0101c7c0 2b6755cb c059a280 c030e4d8 000055cb ffffffff 3d80: ee574fc0 c055a380 ee574000 ee573840 00002b67 ee573840 c03fe9c4 c053fa68 3da0: c055a380 00001f6f 00000000 ee573840 c053f0e0 c0304fdc ef0a6e01 ef3f2050 3dc0: ee573858 ef031000 ee573840 c03055d8 c0ba0c40 ef000f40 00100100 c053f0dc 3de0: c053ffdc c053f0f0 00000008 00000000 ef031000 c02da948 00001140 00000000 3e00: c0563c78 ef253e5f 00000020 ee573840 00000020 c053f0f0 ef313400 ee573840 3e20: c053f0e0 00000000 00000000 c05380c0 ef313400 00001000 00000015 c02df280 3e40: ee574000 ef001e00 00000000 00001080 00000042 005cd980 ef031500 ef031500 3e60: 00000000 c02df824 ef031500 c053e390 c0541084 f00b1e00 c05925e8 c02df864 3e80: 00001f5c ef031440 c053e390 c0278524 00000002 00000000 c0b9eb48 c02df280 3ea0: ee8c7180 00000100 c0542ca8 00000015 00000040 ef031500 ef031500 ef031500 3ec0: c027803c ef252000 00000040 000000ec c05380c0 c0b9eb40 c0b9eb48 c02df940 3ee0: ef060780 ffffa4dd c0564a9c c056343c 002e80a8 00000080 ef031500 00000001 3f00: c053808c ef252000 fffec100 00000003 00000004 002e80a8 0000000c c00258f0 3f20: 002e80a8 c005e704 00000005 00000100 c05634d0 c0538080 c05333e0 00000000 3f40: 0000000a c0565580 c05380c0 ffffa4dc c05434f4 00400100 00000004 c0534cd4 3f60: 00000098 00000000 fffec100 002e80a8 00000004 002e80a8 002a20e0 c0025da8 3f80: c0534cd4 c000f020 fffec10c c053ea60 ef253fb0 c0008530 0000ffe2 b6ef67f4 3fa0: 40000010 ffffffff 00000124 c0012f3c 0000ffe2 002e80f0 0000ffe2 00004000 3fc0: becb6338 becb6334 00000004 00000124 002e80a8 00000004 002e80a8 002a20e0 3fe0: becb6300 becb62f4 002773bb b6ef67f4 40000010 ffffffff 00000000 00000000 [<c03c7c3c>] (skb_panic+0x60/0x64) from [<c02d0ef0>] (skb_put+0x4c/0x50) [<c02d0ef0>] (skb_put+0x4c/0x50) from [<c0318f8c>] (tcp_collapse+0x314/0x3ec) [<c0318f8c>] (tcp_collapse+0x314/0x3ec) from [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) from [<c031a19c>] (tcp_data_queue+0x480/0xe6c) [<c031a19c>] (tcp_data_queue+0x480/0xe6c) from [<c031cad0>] (tcp_rcv_established+0x180/0x62c) [<c031cad0>] (tcp_rcv_established+0x180/0x62c) from [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) from [<c032799c>] (tcp_v4_rcv+0x718/0x73c) [<c032799c>] (tcp_v4_rcv+0x718/0x73c) from [<c0304fdc>] (ip_local_deliver+0x98/0x274) [<c0304fdc>] (ip_local_deliver+0x98/0x274) from [<c03055d8>] (ip_rcv+0x420/0x758) [<c03055d8>] (ip_rcv+0x420/0x758) from [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) from [<c02df280>] (netif_receive_skb+0x48/0xb4) [<c02df280>] (netif_receive_skb+0x48/0xb4) from [<c02df824>] (napi_gro_flush+0x70/0x94) [<c02df824>] (napi_gro_flush+0x70/0x94) from [<c02df864>] (napi_complete+0x1c/0x34) [<c02df864>] (napi_complete+0x1c/0x34) from [<c0278524>] (stmmac_poll+0x4e8/0x5c8) [<c0278524>] (stmmac_poll+0x4e8/0x5c8) from [<c02df940>] (net_rx_action+0xc4/0x1e4) [<c02df940>] (net_rx_action+0xc4/0x1e4) from [<c00258f0>] (__do_softirq+0x12c/0x2e8) [<c00258f0>] (__do_softirq+0x12c/0x2e8) from [<c0025da8>] (irq_exit+0x78/0xac) [<c0025da8>] (irq_exit+0x78/0xac) from [<c000f020>] (handle_IRQ+0x44/0x90) [<c000f020>] (handle_IRQ+0x44/0x90) from [<c0008530>] (gic_handle_irq+0x2c/0x5c) [<c0008530>] (gic_handle_irq+0x2c/0x5c) from [<c0012f3c>] (__irq_usr+0x3c/0x60) 3) The driver was setting the dma buffer size after allocating dma buffers, which caused a system panic when changing the MTU. BUG: Bad page state in process ifconfig pfn:2e850 page:c0b72a00 count:0 mapcount:0 mapping: (null) index:0x0 page flags: 0x200(arch_1) Modules linked in: CPU: 0 PID: 566 Comm: ifconfig Not tainted 3.13.0-rc6-01523-gf7111b9 #29 [<c001547c>] (unwind_backtrace+0x0/0xf8) from [<c00122dc>] (show_stack+0x10/0x14) [<c00122dc>] (show_stack+0x10/0x14) from [<c03c793c>] (dump_stack+0x70/0x88) [<c03c793c>] (dump_stack+0x70/0x88) from [<c00b2620>] (bad_page+0xc8/0x118) [<c00b2620>] (bad_page+0xc8/0x118) from [<c00b302c>] (get_page_from_freelist+0x744/0x870) [<c00b302c>] (get_page_from_freelist+0x744/0x870) from [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) from [<c00b4858>] (__get_free_pages+0x10/0x54) [<c00b4858>] (__get_free_pages+0x10/0x54) from [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) from [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) from [<c02d240c>] (__alloc_skb+0x68/0x13c) [<c02d240c>] (__alloc_skb+0x68/0x13c) from [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) from [<c0279378>] (stmmac_open+0x63c/0x1024) [<c0279378>] (stmmac_open+0x63c/0x1024) from [<c02e18cc>] (__dev_open+0xa0/0xfc) [<c02e18cc>] (__dev_open+0xa0/0xfc) from [<c02e1b40>] (__dev_change_flags+0x94/0x158) [<c02e1b40>] (__dev_change_flags+0x94/0x158) from [<c02e1c24>] (dev_change_flags+0x18/0x48) [<c02e1c24>] (dev_change_flags+0x18/0x48) from [<c0337bc0>] (devinet_ioctl+0x638/0x700) [<c0337bc0>] (devinet_ioctl+0x638/0x700) from [<c02c7aec>] (sock_ioctl+0x64/0x290) [<c02c7aec>] (sock_ioctl+0x64/0x290) from [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) from [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) from [<c000e760>] The fixes have been verified using reproducible, automated testing. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>

We would never check the return value of __radix_tree_create() on insertion which would cause us to return -EEXIST on all cases of failure, even when such failure would be running out of memory, for example. This would trigger errors in various code that assumed that -EEXIST is a critical failure, as opposed to a "regular" error. For example, it would trigger a VM_BUG_ON in mm's swap handling: [ 469.636769] kernel BUG at mm/swap_state.c:113! [ 469.636769] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC [ 469.638313] Dumping ftrace buffer: [ 469.638526] (ftrace buffer empty) [ 469.640016] Modules linked in: [ 469.640110] CPU: 54 PID: 4598 Comm: kswapd6 Tainted: G W 3.14.0-rc4-next-20140228-sasha-00012-g6bbcf46-dirty torvalds#29 [ 469.640110] task: ffff8802850d3000 ti: ffff8802850cc000 task.ti: ffff8802850cc000 [ 469.640110] RIP: 0010:[<ffffffff81296a82>] [<ffffffff81296a82>] __add_to_swap_cache+0x132/0x170 [ 469.640110] RSP: 0000:ffff8802850cd7a8 EFLAGS: 00010246 [ 469.640110] RAX: 0000000080000001 RBX: ffffea000a02ca00 RCX: 0000000000000000 [ 469.640110] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 00000000ffffffff [ 469.640110] RBP: ffff8802850cd7c8 R08: 0000000000000000 R09: 0000000000000000 [ 469.640110] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff868c2e18 [ 469.640110] R13: ffffffff868c2e30 R14: 00000000ffffffef R15: 0000000000000000 [ 469.640110] FS: 0000000000000000(0000) GS:ffff880286800000(0000) knlGS:0000000000000000 [ 469.640110] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 469.640110] CR2: 00000000029c23b0 CR3: 00000000824ca000 CR4: 00000000000006e0 [ 469.640110] Stack: [ 469.640110] ffffea000a02ca00 020000000004c037 ffff8802850cd9c8 ffffea000a02ca00 [ 469.640110] ffff8802850cd7f8 ffffffff81296cac ffff8802850cd9c8 ffff8802850cd9c8 [ 469.640110] ffffea000a02ca00 020000000004c037 ffff8802850cd828 ffffffff81296d90 [ 469.640110] Call Trace: [ 469.640110] [<ffffffff81296cac>] add_to_swap_cache+0x2c/0x60 [ 469.640110] [<ffffffff81296d90>] add_to_swap+0xb0/0xe0 [ 469.640110] [<ffffffff81263d21>] shrink_page_list+0x411/0x7c0 [ 469.640110] [<ffffffff812657ac>] shrink_inactive_list+0x31c/0x570 [ 469.640110] [<ffffffff81265d0b>] ? shrink_active_list+0x30b/0x320 [ 469.640110] [<ffffffff81265e44>] shrink_lruvec+0x124/0x300 [ 469.640110] [<ffffffff812660ae>] shrink_zone+0x8e/0x1d0 [ 469.640110] [<ffffffff81266771>] kswapd_shrink_zone+0xf1/0x1b0 [ 469.640110] [<ffffffff81267783>] balance_pgdat+0x363/0x540 [ 469.640110] [<ffffffff81269383>] kswapd+0x2b3/0x310 [ 469.640110] [<ffffffff812690d0>] ? ftrace_raw_event_mm_vmscan_writepage+0x180/0x180 [ 469.640110] [<ffffffff811678b5>] kthread+0x105/0x110 [ 469.640110] [<ffffffff811a3b52>] ? __lock_release+0x1e2/0x200 [ 469.640110] [<ffffffff811677b0>] ? set_kthreadd_affinity+0x30/0x30 [ 469.640110] [<ffffffff8439f58c>] ret_from_fork+0x7c/0xb0 [ 469.640110] [<ffffffff811677b0>] ? set_kthreadd_affinity+0x30/0x30 [ 469.640110] Code: 00 00 be 0a 00 00 00 e8 0d ae fd ff 48 ff 05 b6 33 d2 06 4c 89 ef e8 1e f6 0f 03 eb 2c 4c 89 ef e8 14 f6 0f 03 41 83 fe ef 75 04 <0f> 0b eb fe 48 c7 43 30 00 00 00 00 f0 80 63 02 fe 48 89 df e8 [ 469.640110] RIP [<ffffffff81296a82>] __add_to_swap_cache+0x132/0x170 [ 469.640110] RSP <ffff8802850cd7a8> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Rik van Riel <riel@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

These changes correct the following issues with jumbo frames on the stmmac driver: 1) The Synopsys EMAC can be configured to support different FIFO sizes at core configuration time. There's no way to query the controller and know the FIFO size, so the driver needs to get this information from the device tree in order to know how to correctly handle MTU changes and setting up dma buffers. The default max-frame-size is as currently used, which is the size of a jumbo frame. 2) The driver was enabling Jumbo frames by default, but was not allocating dma buffers of sufficient size to handle the maximum possible packet size that could be received. This led to memory corruption since DMAs were occurring beyond the extent of the allocated receive buffers for certain types of network traffic. kernel BUG at net/core/skbuff.c:126! Internal error: Oops - BUG: 0 [#1] SMP ARM Modules linked in: CPU: 0 PID: 563 Comm: sockperf Not tainted 3.13.0-rc6-01523-gf7111b9 torvalds#31 task: ef35e580 ti: ef252000 task.ti: ef252000 PC is at skb_panic+0x60/0x64 LR is at skb_panic+0x60/0x64 pc : [<c03c7c3c>] lr : [<c03c7c3c>] psr: 60000113 sp : ef253c18 ip : 60000113 fp : 00000000 r10: ef3a5400 r9 : 00000ebc r8 : ef3a546c r7 : ee59f000 r6 : ee59f084 r5 : ee59ff40 r4 : ee59f140 r3 : 000003e2 r2 : 00000007 r1 : c0b9c420 r0 : 0000007d Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 2e8ac04a DAC: 00000015 Process sockperf (pid: 563, stack limit = 0xef252248) Stack: (0xef253c18 to 0xef254000) 3c00: 00000ebc ee59f000 3c20: ee59f084 ee59ff40 ee59f140 c04a9cd8 ee8c50c0 00000ebc ee59ff40 00000000 3c40: ee59f140 c02d0ef0 00000056 ef1eda80 ee8c50c0 00000ebc 22bbef29 c0318f8c 3c60: 00000056 ef3a547c ffe2c716 c02c9c90 c0ba1298 ef3a5838 ef3a5838 ef3a5400 3c80: 000020c0 ee573840 000055cb ef3f2050 c053f0e0 c0319214 22b9b085 22d92813 3ca0: 00001c80 004b8e00 ef3a5400 ee573840 ef3f2064 22d92813 ef3f2064 000055cb 3cc0: ef3f2050 c031a19c ef252000 00000000 00000000 c0561bc0 00000000 ff00ffff 3ce0: c05621c0 ef3a5400 ef3f2064 ee573840 00000020 ef3f2064 000055cb ef3f2050 3d00: c053f0e0 c031cad0 c053e740 00000e60 00000000 00000000 ee573840 ef3a5400 3d20: ef0a6e00 00000000 ef3f2064 c032507c 00010000 00000020 c0561bc0 c0561bc0 3d40: ee599850 c032799c 00000000 ee573840 c055a380 ef3a5400 00000000 ef3f2064 3d60: ef3f2050 c032799c 0101c7c0 2b6755cb c059a280 c030e4d8 000055cb ffffffff 3d80: ee574fc0 c055a380 ee574000 ee573840 00002b67 ee573840 c03fe9c4 c053fa68 3da0: c055a380 00001f6f 00000000 ee573840 c053f0e0 c0304fdc ef0a6e01 ef3f2050 3dc0: ee573858 ef031000 ee573840 c03055d8 c0ba0c40 ef000f40 00100100 c053f0dc 3de0: c053ffdc c053f0f0 00000008 00000000 ef031000 c02da948 00001140 00000000 3e00: c0563c78 ef253e5f 00000020 ee573840 00000020 c053f0f0 ef313400 ee573840 3e20: c053f0e0 00000000 00000000 c05380c0 ef313400 00001000 00000015 c02df280 3e40: ee574000 ef001e00 00000000 00001080 00000042 005cd980 ef031500 ef031500 3e60: 00000000 c02df824 ef031500 c053e390 c0541084 f00b1e00 c05925e8 c02df864 3e80: 00001f5c ef031440 c053e390 c0278524 00000002 00000000 c0b9eb48 c02df280 3ea0: ee8c7180 00000100 c0542ca8 00000015 00000040 ef031500 ef031500 ef031500 3ec0: c027803c ef252000 00000040 000000ec c05380c0 c0b9eb40 c0b9eb48 c02df940 3ee0: ef060780 ffffa4dd c0564a9c c056343c 002e80a8 00000080 ef031500 00000001 3f00: c053808c ef252000 fffec100 00000003 00000004 002e80a8 0000000c c00258f0 3f20: 002e80a8 c005e704 00000005 00000100 c05634d0 c0538080 c05333e0 00000000 3f40: 0000000a c0565580 c05380c0 ffffa4dc c05434f4 00400100 00000004 c0534cd4 3f60: 00000098 00000000 fffec100 002e80a8 00000004 002e80a8 002a20e0 c0025da8 3f80: c0534cd4 c000f020 fffec10c c053ea60 ef253fb0 c0008530 0000ffe2 b6ef67f4 3fa0: 40000010 ffffffff 00000124 c0012f3c 0000ffe2 002e80f0 0000ffe2 00004000 3fc0: becb6338 becb6334 00000004 00000124 002e80a8 00000004 002e80a8 002a20e0 3fe0: becb6300 becb62f4 002773bb b6ef67f4 40000010 ffffffff 00000000 00000000 [<c03c7c3c>] (skb_panic+0x60/0x64) from [<c02d0ef0>] (skb_put+0x4c/0x50) [<c02d0ef0>] (skb_put+0x4c/0x50) from [<c0318f8c>] (tcp_collapse+0x314/0x3ec) [<c0318f8c>] (tcp_collapse+0x314/0x3ec) from [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) [<c0319214>] (tcp_try_rmem_schedule+0x1b0/0x3c4) from [<c031a19c>] (tcp_data_queue+0x480/0xe6c) [<c031a19c>] (tcp_data_queue+0x480/0xe6c) from [<c031cad0>] (tcp_rcv_established+0x180/0x62c) [<c031cad0>] (tcp_rcv_established+0x180/0x62c) from [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) [<c032507c>] (tcp_v4_do_rcv+0x13c/0x31c) from [<c032799c>] (tcp_v4_rcv+0x718/0x73c) [<c032799c>] (tcp_v4_rcv+0x718/0x73c) from [<c0304fdc>] (ip_local_deliver+0x98/0x274) [<c0304fdc>] (ip_local_deliver+0x98/0x274) from [<c03055d8>] (ip_rcv+0x420/0x758) [<c03055d8>] (ip_rcv+0x420/0x758) from [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) [<c02da948>] (__netif_receive_skb_core+0x44c/0x5bc) from [<c02df280>] (netif_receive_skb+0x48/0xb4) [<c02df280>] (netif_receive_skb+0x48/0xb4) from [<c02df824>] (napi_gro_flush+0x70/0x94) [<c02df824>] (napi_gro_flush+0x70/0x94) from [<c02df864>] (napi_complete+0x1c/0x34) [<c02df864>] (napi_complete+0x1c/0x34) from [<c0278524>] (stmmac_poll+0x4e8/0x5c8) [<c0278524>] (stmmac_poll+0x4e8/0x5c8) from [<c02df940>] (net_rx_action+0xc4/0x1e4) [<c02df940>] (net_rx_action+0xc4/0x1e4) from [<c00258f0>] (__do_softirq+0x12c/0x2e8) [<c00258f0>] (__do_softirq+0x12c/0x2e8) from [<c0025da8>] (irq_exit+0x78/0xac) [<c0025da8>] (irq_exit+0x78/0xac) from [<c000f020>] (handle_IRQ+0x44/0x90) [<c000f020>] (handle_IRQ+0x44/0x90) from [<c0008530>] (gic_handle_irq+0x2c/0x5c) [<c0008530>] (gic_handle_irq+0x2c/0x5c) from [<c0012f3c>] (__irq_usr+0x3c/0x60) 3) The driver was setting the dma buffer size after allocating dma buffers, which caused a system panic when changing the MTU. BUG: Bad page state in process ifconfig pfn:2e850 page:c0b72a00 count:0 mapcount:0 mapping: (null) index:0x0 page flags: 0x200(arch_1) Modules linked in: CPU: 0 PID: 566 Comm: ifconfig Not tainted 3.13.0-rc6-01523-gf7111b9 torvalds#29 [<c001547c>] (unwind_backtrace+0x0/0xf8) from [<c00122dc>] (show_stack+0x10/0x14) [<c00122dc>] (show_stack+0x10/0x14) from [<c03c793c>] (dump_stack+0x70/0x88) [<c03c793c>] (dump_stack+0x70/0x88) from [<c00b2620>] (bad_page+0xc8/0x118) [<c00b2620>] (bad_page+0xc8/0x118) from [<c00b302c>] (get_page_from_freelist+0x744/0x870) [<c00b302c>] (get_page_from_freelist+0x744/0x870) from [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) [<c00b40f4>] (__alloc_pages_nodemask+0x118/0x86c) from [<c00b4858>] (__get_free_pages+0x10/0x54) [<c00b4858>] (__get_free_pages+0x10/0x54) from [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) [<c00cba1c>] (kmalloc_order_trace+0x24/0xa0) from [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) [<c02d199c>] (__kmalloc_reserve.isra.21+0x24/0x70) from [<c02d240c>] (__alloc_skb+0x68/0x13c) [<c02d240c>] (__alloc_skb+0x68/0x13c) from [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) [<c02d3930>] (__netdev_alloc_skb+0x3c/0xe8) from [<c0279378>] (stmmac_open+0x63c/0x1024) [<c0279378>] (stmmac_open+0x63c/0x1024) from [<c02e18cc>] (__dev_open+0xa0/0xfc) [<c02e18cc>] (__dev_open+0xa0/0xfc) from [<c02e1b40>] (__dev_change_flags+0x94/0x158) [<c02e1b40>] (__dev_change_flags+0x94/0x158) from [<c02e1c24>] (dev_change_flags+0x18/0x48) [<c02e1c24>] (dev_change_flags+0x18/0x48) from [<c0337bc0>] (devinet_ioctl+0x638/0x700) [<c0337bc0>] (devinet_ioctl+0x638/0x700) from [<c02c7aec>] (sock_ioctl+0x64/0x290) [<c02c7aec>] (sock_ioctl+0x64/0x290) from [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) [<c0100890>] (do_vfs_ioctl+0x78/0x5b8) from [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) [<c0100e0c>] (SyS_ioctl+0x3c/0x5c) from [<c000e760>] The fixes have been verified using reproducible, automated testing. Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Conflicts: drivers/net/ethernet/stmicro/stmmac/dwmac1000.h drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c drivers/net/ethernet/stmicro/stmmac/stmmac_main.c drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c include/linux/stmmac.h

…ixes WARNING: please, no spaces at the start of a line torvalds#29: FILE: mm/memcontrol.c:689: + int nid = zone_to_nid(zone);$ WARNING: please, no spaces at the start of a line torvalds#30: FILE: mm/memcontrol.c:690: + int zid = zone_idx(zone);$ WARNING: please, no spaces at the start of a line torvalds#32: FILE: mm/memcontrol.c:692: + return mem_cgroup_zoneinfo(memcg, nid, zid);$ total: 0 errors, 3 warnings, 35 lines checked ./patches/mm-memcontrolc-introduce-helper-mem_cgroup_zoneinfo_zone.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Jianyu Zhan <nasa4836@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Otherwise we get a deadlock like below: [ 1044.042749] BUG: scheduling while atomic: ksoftirqd/21/141/0x00010003 [ 1044.042752] INFO: lockdep is turned off. [ 1044.042754] Modules linked in: [ 1044.042757] Pid: 141, comm: ksoftirqd/21 Tainted: G W 3.4.0-rc2-rt3-23676-ga723175-dirty torvalds#29 [ 1044.042759] Call Trace: [ 1044.042761] <IRQ> [<ffffffff8107d8e5>] __schedule_bug+0x65/0x80 [ 1044.042770] [<ffffffff8168978c>] __schedule+0x83c/0xa70 [ 1044.042775] [<ffffffff8106bdd2>] ? prepare_to_wait+0x32/0xb0 [ 1044.042779] [<ffffffff81689a5e>] schedule+0x2e/0xa0 [ 1044.042782] [<ffffffff81071ebd>] hrtimer_wait_for_timer+0x6d/0xb0 [ 1044.042786] [<ffffffff8106bb30>] ? wake_up_bit+0x40/0x40 [ 1044.042790] [<ffffffff81071f20>] hrtimer_cancel+0x20/0x40 [ 1044.042794] [<ffffffff8111da0c>] perf_swevent_cancel_hrtimer+0x3c/0x50 [ 1044.042798] [<ffffffff8111da31>] task_clock_event_stop+0x11/0x40 [ 1044.042802] [<ffffffff8111da6e>] task_clock_event_del+0xe/0x10 [ 1044.042805] [<ffffffff8111c568>] event_sched_out+0x118/0x1d0 [ 1044.042809] [<ffffffff8111c649>] group_sched_out+0x29/0x90 [ 1044.042813] [<ffffffff8111ed7e>] __perf_event_disable+0x18e/0x200 [ 1044.042817] [<ffffffff8111c343>] remote_function+0x63/0x70 [ 1044.042821] [<ffffffff810b0aae>] generic_smp_call_function_single_interrupt+0xce/0x120 [ 1044.042826] [<ffffffff81022bc7>] smp_call_function_single_interrupt+0x27/0x40 [ 1044.042831] [<ffffffff8168d50c>] call_function_single_interrupt+0x6c/0x80 [ 1044.042833] <EOI> [<ffffffff811275b0>] ? perf_event_overflow+0x20/0x20 [ 1044.042840] [<ffffffff8168b970>] ? _raw_spin_unlock_irq+0x30/0x70 [ 1044.042844] [<ffffffff8168b976>] ? _raw_spin_unlock_irq+0x36/0x70 [ 1044.042848] [<ffffffff810702e2>] run_hrtimer_softirq+0xc2/0x200 [ 1044.042853] [<ffffffff811275b0>] ? perf_event_overflow+0x20/0x20 [ 1044.042857] [<ffffffff81045265>] __do_softirq_common+0xf5/0x3a0 [ 1044.042862] [<ffffffff81045c3d>] __thread_do_softirq+0x15d/0x200 [ 1044.042865] [<ffffffff81045dda>] run_ksoftirqd+0xfa/0x210 [ 1044.042869] [<ffffffff81045ce0>] ? __thread_do_softirq+0x200/0x200 [ 1044.042873] [<ffffffff81045ce0>] ? __thread_do_softirq+0x200/0x200 [ 1044.042877] [<ffffffff8106b596>] kthread+0xb6/0xc0 [ 1044.042881] [<ffffffff8168b97b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 1044.042886] [<ffffffff8168d994>] kernel_thread_helper+0x4/0x10 [ 1044.042889] [<ffffffff8107d98c>] ? finish_task_switch+0x8c/0x110 [ 1044.042894] [<ffffffff8168b97b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 1044.042897] [<ffffffff8168bd5d>] ? retint_restore_args+0xe/0xe [ 1044.042900] [<ffffffff8106b4e0>] ? kthreadd+0x1e0/0x1e0 [ 1044.042902] [<ffffffff8168d990>] ? gs_change+0xb/0xb Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1341476476-5666-1-git-send-email-yong.zhang0@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Otherwise we get a deadlock like below: [ 1044.042749] BUG: scheduling while atomic: ksoftirqd/21/141/0x00010003 [ 1044.042752] INFO: lockdep is turned off. [ 1044.042754] Modules linked in: [ 1044.042757] Pid: 141, comm: ksoftirqd/21 Tainted: G W 3.4.0-rc2-rt3-23676-ga723175-dirty #29 [ 1044.042759] Call Trace: [ 1044.042761] <IRQ> [<ffffffff8107d8e5>] __schedule_bug+0x65/0x80 [ 1044.042770] [<ffffffff8168978c>] __schedule+0x83c/0xa70 [ 1044.042775] [<ffffffff8106bdd2>] ? prepare_to_wait+0x32/0xb0 [ 1044.042779] [<ffffffff81689a5e>] schedule+0x2e/0xa0 [ 1044.042782] [<ffffffff81071ebd>] hrtimer_wait_for_timer+0x6d/0xb0 [ 1044.042786] [<ffffffff8106bb30>] ? wake_up_bit+0x40/0x40 [ 1044.042790] [<ffffffff81071f20>] hrtimer_cancel+0x20/0x40 [ 1044.042794] [<ffffffff8111da0c>] perf_swevent_cancel_hrtimer+0x3c/0x50 [ 1044.042798] [<ffffffff8111da31>] task_clock_event_stop+0x11/0x40 [ 1044.042802] [<ffffffff8111da6e>] task_clock_event_del+0xe/0x10 [ 1044.042805] [<ffffffff8111c568>] event_sched_out+0x118/0x1d0 [ 1044.042809] [<ffffffff8111c649>] group_sched_out+0x29/0x90 [ 1044.042813] [<ffffffff8111ed7e>] __perf_event_disable+0x18e/0x200 [ 1044.042817] [<ffffffff8111c343>] remote_function+0x63/0x70 [ 1044.042821] [<ffffffff810b0aae>] generic_smp_call_function_single_interrupt+0xce/0x120 [ 1044.042826] [<ffffffff81022bc7>] smp_call_function_single_interrupt+0x27/0x40 [ 1044.042831] [<ffffffff8168d50c>] call_function_single_interrupt+0x6c/0x80 [ 1044.042833] <EOI> [<ffffffff811275b0>] ? perf_event_overflow+0x20/0x20 [ 1044.042840] [<ffffffff8168b970>] ? _raw_spin_unlock_irq+0x30/0x70 [ 1044.042844] [<ffffffff8168b976>] ? _raw_spin_unlock_irq+0x36/0x70 [ 1044.042848] [<ffffffff810702e2>] run_hrtimer_softirq+0xc2/0x200 [ 1044.042853] [<ffffffff811275b0>] ? perf_event_overflow+0x20/0x20 [ 1044.042857] [<ffffffff81045265>] __do_softirq_common+0xf5/0x3a0 [ 1044.042862] [<ffffffff81045c3d>] __thread_do_softirq+0x15d/0x200 [ 1044.042865] [<ffffffff81045dda>] run_ksoftirqd+0xfa/0x210 [ 1044.042869] [<ffffffff81045ce0>] ? __thread_do_softirq+0x200/0x200 [ 1044.042873] [<ffffffff81045ce0>] ? __thread_do_softirq+0x200/0x200 [ 1044.042877] [<ffffffff8106b596>] kthread+0xb6/0xc0 [ 1044.042881] [<ffffffff8168b97b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 1044.042886] [<ffffffff8168d994>] kernel_thread_helper+0x4/0x10 [ 1044.042889] [<ffffffff8107d98c>] ? finish_task_switch+0x8c/0x110 [ 1044.042894] [<ffffffff8168b97b>] ? _raw_spin_unlock_irq+0x3b/0x70 [ 1044.042897] [<ffffffff8168bd5d>] ? retint_restore_args+0xe/0xe [ 1044.042900] [<ffffffff8106b4e0>] ? kthreadd+0x1e0/0x1e0 [ 1044.042902] [<ffffffff8168d990>] ? gs_change+0xb/0xb Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1341476476-5666-1-git-send-email-yong.zhang0@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

@offset

After testing nfs4 lock, I restart the nfsd service, got messages as, [ 5677.403419] nfsd: last server has exited, flushing export cache [ 5677.463728] ============================================================================= [ 5677.463942] BUG nfsd4_files (Tainted: G B OE): Objects remaining in nfsd4_files on kmem_cache_close() [ 5677.464055] ----------------------------------------------------------------------------- [ 5677.464203] INFO: Slab 0xffffea0000233400 objects=28 used=1 fp=0xffff880008cd3d98 flags=0x3ffc0000004080 [ 5677.464318] CPU: 0 PID: 3772 Comm: rmmod Tainted: G B OE 3.16.0-rc2+ torvalds#29 [ 5677.464420] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 5677.464538] 0000000000000000 0000000036af2c9f ffff88000ce97d68 ffffffff816eacfa [ 5677.464643] ffffea0000233400 ffff88000ce97e40 ffffffff811cda44 ffffffff00000020 [ 5677.464774] ffff88000ce97e50 ffff88000ce97e00 656a624f00000008 616d657220737463 [ 5677.464875] Call Trace: [ 5677.464925] [<ffffffff816eacfa>] dump_stack+0x45/0x56 [ 5677.464983] [<ffffffff811cda44>] slab_err+0xb4/0xe0 [ 5677.465040] [<ffffffff811d0457>] ? __kmalloc+0x117/0x290 [ 5677.465099] [<ffffffff81100eec>] ? on_each_cpu_cond+0xac/0xf0 [ 5677.465158] [<ffffffff811d1bc0>] ? kmem_cache_close+0x110/0x2e0 [ 5677.465218] [<ffffffff811d1be0>] kmem_cache_close+0x130/0x2e0 [ 5677.465279] [<ffffffff8135a0c1>] ? kobject_cleanup+0x91/0x1b0 [ 5677.465338] [<ffffffff811d22be>] __kmem_cache_shutdown+0xe/0x10 [ 5677.465399] [<ffffffff8119bd28>] kmem_cache_destroy+0x48/0x100 [ 5677.465466] [<ffffffffa05ef78d>] nfsd4_free_slabs+0x2d/0x50 [nfsd] [ 5677.465530] [<ffffffffa05fa987>] exit_nfsd+0x34/0x6ad [nfsd] [ 5677.465589] [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200 [ 5677.465649] [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90 [ 5677.465759] [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b [ 5677.465822] INFO: Object 0xffff880008cd0000 @offset=0 [ 5677.465882] INFO: Allocated in nfsd4_process_open1+0x61/0x350 [nfsd] age=7599 cpu=0 pid=3253 [ 5677.466115] __slab_alloc+0x3b0/0x4b1 [ 5677.466166] kmem_cache_alloc+0x1e4/0x240 [ 5677.466220] nfsd4_process_open1+0x61/0x350 [nfsd] [ 5677.466276] nfsd4_open+0xee/0x860 [nfsd] [ 5677.466329] nfsd4_proc_compound+0x4d7/0x7f0 [nfsd] [ 5677.466384] nfsd_dispatch+0xbb/0x200 [nfsd] [ 5677.466447] svc_process_common+0x453/0x6f0 [sunrpc] [ 5677.466506] svc_process+0x103/0x170 [sunrpc] [ 5677.466559] nfsd+0x117/0x190 [nfsd] [ 5677.466609] kthread+0xd8/0xf0 [ 5677.466656] ret_from_fork+0x7c/0xb0 [ 5677.466775] kmem_cache_destroy nfsd4_files: Slab cache still has objects [ 5677.466839] CPU: 0 PID: 3772 Comm: rmmod Tainted: G B OE 3.16.0-rc2+ torvalds#29 [ 5677.466937] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 [ 5677.467049] 0000000000000000 0000000036af2c9f ffff88000ce97eb0 ffffffff816eacfa [ 5677.467150] ffff880020bb2d00 ffff88000ce97ed0 ffffffff8119bdd9 0000000000000000 [ 5677.467250] ffffffffa06065c0 ffff88000ce97ee0 ffffffffa05ef78d ffff88000ce97ef0 [ 5677.467351] Call Trace: [ 5677.467397] [<ffffffff816eacfa>] dump_stack+0x45/0x56 [ 5677.467454] [<ffffffff8119bdd9>] kmem_cache_destroy+0xf9/0x100 [ 5677.467516] [<ffffffffa05ef78d>] nfsd4_free_slabs+0x2d/0x50 [nfsd] [ 5677.467579] [<ffffffffa05fa987>] exit_nfsd+0x34/0x6ad [nfsd] [ 5677.467639] [<ffffffff81104ac2>] SyS_delete_module+0x162/0x200 [ 5677.467765] [<ffffffff81013b69>] ? do_notify_resume+0x59/0x90 [ 5677.467826] [<ffffffff816f2369>] system_call_fastpath+0x16/0x1b Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Jeff Layton <jlayton@primarydata.com> Fixes: 11b9164 "nfsd: Add a struct nfs4_file field to struct nfs4_stid" Signed-off-by: J. Bruce Fields <bfields@redhat.com>

WARNING: line over 80 characters torvalds#25: FILE: include/linux/compiler-gcc5.h:2: +#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." WARNING: please, no space before tabs torvalds#29: FILE: include/linux/compiler-gcc5.h:6: +#define __must_check ^I^I__attribute__((warn_unused_result))$ ERROR: space required after that ',' (ctx:VxV) torvalds#30: FILE: include/linux/compiler-gcc5.h:7: +#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) ^ ERROR: space required after that ',' (ctx:VxV) torvalds#30: FILE: include/linux/compiler-gcc5.h:7: +#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) ^ total: 2 errors, 2 warnings, 66 lines checked ./patches/kernel-add-support-for-gcc-5.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I'm getting the spew below when booting with Haswell (Xeon E5-2699 v3) CPUs and the "Cluster-on-Die" (CoD) feature enabled in the BIOS. It seems similar to the issue that some folks from AMD ran in to on their systems and addressed in this commit: 161270f ("x86/smp: Fix topology checks on AMD MCM CPUs") Both these Intel and AMD systems break an assumption which is being enforced by topology_sane(): a socket may not contain more than one NUMA node. AMD special-cased their system by looking for a cpuid flag. The Intel mode is dependent on BIOS options and I do not know of a way which it is enumerated other than the tables being parsed during the CPU bringup process. In other words, we have to trust the ACPI tables <shudder>. This detects the situation where a NUMA node occurs at a place in the middle of the "CPU" sched domains. It replaces the default topology with one that relies on the NUMA information from the firmware (SRAT table) for all levels of sched domains above the hyperthreads. This also fixes a sysfs bug. We used to freak out when we saw the "mc" group cross a node boundary, so we stopped building the MC group. MC gets exported as the 'core_siblings_list' in /sys/devices/system/cpu/cpu*/topology/ and this caused CPUs with the same 'physical_package_id' to not be listed together in 'core_siblings_list'. This violates a statement from Documentation/ABI/testing/sysfs-devices-system-cpu: core_siblings: internal kernel map of cpu#'s hardware threads within the same physical_package_id. core_siblings_list: human-readable list of the logical CPU numbers within the same physical_package_id as cpu#. The sysfs effects here cause an issue with the hwloc tool where it gets confused and thinks there are more sockets than are physically present. Before this patch, there are two packages: # cd /sys/devices/system/cpu/ # cat cpu*/topology/physical_package_id | sort | uniq -c 18 0 18 1 But 4 _sets_ of core siblings: # cat cpu*/topology/core_siblings_list | sort | uniq -c 9 0-8 9 18-26 9 27-35 9 9-17 After this set, there are only 2 sets of core siblings, which is what we expect for a 2-socket system. # cat cpu*/topology/physical_package_id | sort | uniq -c 18 0 18 1 # cat cpu*/topology/core_siblings_list | sort | uniq -c 18 0-17 18 18-35 Example spew: ... NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. #2 #3 #4 #5 torvalds#6 torvalds#7 torvalds#8 .... node #1, CPUs: torvalds#9 ------------[ cut here ]------------ WARNING: CPU: 9 PID: 0 at /home/ak/hle/linux-hle-2.6/arch/x86/kernel/smpboot.c:306 topology_sane.isra.2+0x74/0x90() sched: CPU torvalds#9's mc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. Modules linked in: CPU: 9 PID: 0 Comm: swapper/9 Not tainted 3.17.0-rc1-00293-g8e01c4d-dirty torvalds#631 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014 0000000000000009 ffff88046ddabe00 ffffffff8172e485 ffff88046ddabe48 ffff88046ddabe38 ffffffff8109691d 000000000000b001 0000000000000009 ffff88086fc12580 000000000000b020 0000000000000009 ffff88046ddabe98 Call Trace: [<ffffffff8172e485>] dump_stack+0x45/0x56 [<ffffffff8109691d>] warn_slowpath_common+0x7d/0xa0 [<ffffffff8109698c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff81074f94>] topology_sane.isra.2+0x74/0x90 [<ffffffff8107530e>] set_cpu_sibling_map+0x31e/0x4f0 [<ffffffff8107568d>] start_secondary+0x1ad/0x240 ---[ end trace 3fe5f587a9fcde61 ]--- torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 torvalds#16 torvalds#17 .... node #2, CPUs: torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 torvalds#24 torvalds#25 torvalds#26 .... node #3, CPUs: torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 torvalds#32 torvalds#33 torvalds#34 torvalds#35 Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> [ Added LLC domain and s/match_mc/match_die/ ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: David Rientjes <rientjes@google.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: brice.goglin@gmail.com Cc: "H. Peter Anvin" <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/20140918193334.C065EBCE@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

WARNING: line over 80 characters torvalds#25: FILE: include/linux/compiler-gcc5.h:2: +#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." WARNING: please, no space before tabs torvalds#29: FILE: include/linux/compiler-gcc5.h:6: +#define __must_check ^I^I__attribute__((warn_unused_result))$ ERROR: space required after that ',' (ctx:VxV) torvalds#30: FILE: include/linux/compiler-gcc5.h:7: +#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) ^ ERROR: space required after that ',' (ctx:VxV) torvalds#30: FILE: include/linux/compiler-gcc5.h:7: +#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) ^ total: 2 errors, 2 warnings, 66 lines checked ./patches/kernel-add-support-for-gcc-5.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

GIT 2cf50762577a191f2f646e4034cc21f4764d90ab commit 68c7ed167ef564c83a0022f2d0fe15cbdac0c5a4 Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:04 2014 +1000 Documentation: disable vdso_test to avoid breakage with old glibc glibc versions older than 2.16 don't include sys/auxv.h which this executable uses. Since we don't have a good way to test for specific glibc versions in kbuild, just disable it for now. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit 03979f1100aca61cf16ac7f3e464d7f11747e86b Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:04 2014 +1000 Documentation: update vDSO makefile to build portable examples Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit 13770826a9872de445703ee6c05b44f525f78513 Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:04 2014 +1000 Documentation: update .gitignore files Add some missing files to .gitignore. Push Documentation/.gitignore down into subdirectories. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit ce0f3b2691c066255fcf25c77e929ff8cda73417 Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: support glibc versions without htole macros glibc 2.9 introduced the htole<16/32/64> macros, add them to tools/include to support older versions of glibc. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit 77cb6d96708f5b681969ce144057ae1ebda96057 Author: Mark Brown <broonie@kernel.org> Date: Thu Sep 25 10:34:03 2014 +1000 v4l2-pci-skeleton: Only build if PCI is available Currently arm64 does not support PCI but it does support v4l2. Since the PCI skeleton driver is built unconditionally as a module with no dependency on PCI this causes build failures for arm64 allmodconfig. Fix this by defining a symbol VIDEO_PCI_SKELETON for the skeleton and conditionalising the build on that. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [added VIDEO dependencies] commit 112a45ca901ced590ff71c5fd7d717f8771717ce Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: fix misc. warnings Fix a few warnings that gcc emits during a default build. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit b0fc375fe2c09477b5effc8e030668203d24c897 Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: make functions static to avoid prototype warnings Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit 593ed472bcea93949c72ddc45e340fee47a05aa3 Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:03 2014 +1000 Documentation: add makefiles for more targets Add a bunch of previously unbuilt source files to the Documentation build machinery. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit cc67d673f252264535cef654c37c8dd621340e8b Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:02 2014 +1000 Documentation: use subdir-y to avoid unnecessary built-in.o files Change the Documentation makefiles from obj-m to subdir-y to avoid generating unnecessary built-in.o files since nothing in Documentation/ is ever linked in to vmlinux. Signed-off-by: Peter Foley <pefoley2@pefoley.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit bb69afeca345380203c89d2f19e95eca786b5a4c Author: Peter Foley <pefoley2@pefoley.com> Date: Thu Sep 25 10:34:02 2014 +1000 Documentation: remove networking/.gitignore Remove empty networking/.gitignore Signed-off-by: Peter Foley <pefoley2@pefoley.com> Cc: rdunlap@infradead.org Cc: linux-doc@vger.kernel.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> commit 4d96fb1ec81118c6406fe6d3670f172b2faaedf3 Author: Heiko Stuebner <heiko.stuebner@bq.com> Date: Tue Sep 23 22:42:16 2014 +0200 power: gpio-charger: do not use gpio value directly Some gpio implementations return interesting values for gpio_get_value when the value is not 0 - as seen on a imx6sl board. Therefore do not use the value returned from gpio_get_value directly but simply check for 0 or not 0. Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> commit ddd26dff757d08d4eb309a28bf2a02372387e71f Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Tue Sep 16 18:10:41 2014 +0200 power: max8925: Use of_get_child_by_name Use of_get_child_by_name to obtain reference to charger node instead of of_find_node_by_name which can walk outside of the parent node. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> commit 920ac5be91bc447c5ef82f457207a169aa79c5f6 Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Tue Sep 16 18:10:40 2014 +0200 power: max8925: Fix NULL ptr dereference on memory allocation failure Check the return value of devm_kzalloc() to fix possible NULL pointer dereference and properly exit the probe() on memory allocation failure. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> commit 628ef02c56e515430dd8d8439126dd0ecb8ce8bb Author: Puthikorn Voravootivat <puthik@chromium.org> Date: Tue Sep 9 12:20:35 2014 -0700 bq27x00_battery: Add support to bq27742 Add support to bq27742 in bq27x00 driver. bq27742 register addresses are mostly mostly the same as bq27500 addresses with minor differences. Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Benson Leung <bleung@chromium.org> Signed-off-by: Sebastian Reichel <sre@kernel.org> commit 042e1c79166b9250edd8262bea84e1703f27ad2e Author: Jin Yao <yao.jin@linux.intel.com> Date: Mon Sep 22 10:31:14 2014 -0700 Input: soc_button_array - convert to platform bus ACPI device enumeration mechanism changed a lot since 3.16-rc1. ACPI device objects with _HID will be enumerated to platform bus by default. For the existing PNP drivers that probe the PNPACPI devices, the device ids are listed explicitly in drivers/acpi/acpi_pnp.c. But ACPI folks will continue their effort on shrinking this id list by converting the PNP drivers to platform drivers, for the devices that don't belong to PNP bus in nature. Signed-off-by: Jin Yao <yao.jin@intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> commit 3049683eafdbbbd7350b0e5ca02a2d8c026a3362 Author: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Date: Wed Sep 24 16:00:33 2014 -0700 Input: i8042 - fix Asus X450LCP touchpad detection We need to add this module to the nomux table to be able to detect the touchpad. Cc: stablevger.kernel.org Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> commit 3f3d0463636e38a27c3000d59889b8bdc9072ce1 Author: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Date: Thu Sep 25 08:23:26 2014 +0900 ARM: dts: Remove display timings node from exynos5250-snow Commit a3d72cad63ed ("ARM: dts: Clean up exynos5250-snow") improved the Snow DTS but the patch was rebased due conflicting changes and the merge resolution added a device node removed by commit a98c3c23868f ("ARM: dts: update display related nodes for exynos5250-snow"). This patch removes the node again to keep the DTS as before. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> commit dd12ac7fb3988be113465f499ad91b30b8aa4bdd Author: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Date: Thu Sep 25 08:21:25 2014 +0900 ARM: dts: Fix chip select GPIO on exynos5250-smdk5250 Commit 65bbe3fee0e1 ("ARM: dts: Clean up exynos5250-smdk5250") improved the smdk5250 DTS but the patch was rebased due conflicting changes and the merge resolution added a regression of the bug fixed in commit e138d4333aa0 ("ARM: dts: fix the chip select gpios definition in the SPI nodes"). This patch fixes the issue by removing the old cs-gpio and using the generic cs-gpios property. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> commit 5c4dd348af35a6f6db97b4f2401f74c71f7f3c7d Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Date: Thu Sep 25 00:53:44 2014 +0200 Revert "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()" Revert commit 6efde38f0769 (PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()) that introduced a NULL pointer dereference during system resume from hibernation: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 PGD b39c2067 PUD b39c1067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: <irrelevant list of modules> CPU: 1 PID: 4898 Comm: s2disk Tainted: G C 3.17-rc5-amd64 #1 Debian 3.17~rc5-1~exp1 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 task: ffff88023155ea40 ti: ffff8800b3b14000 task.ti: ffff8800b3b14000 RIP: 0010:[<ffffffff810a8cc1>] [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 RSP: 0018:ffff8800b3b17ea8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8800b39bab00 RCX: 0000000000000001 RDX: ffff8800b39bab10 RSI: ffff8800b39bab00 RDI: 0000000000000000 RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800b39bab10 R11: 0000000000000246 R12: ffffea0000000000 R13: ffff880232f485a0 R14: ffff88023ac27cd8 R15: ffff880232927590 FS: 00007f406d83b700(0000) GS:ffff88023bc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000b3a62000 CR4: 00000000000007e0 Stack: ffff8800b39bab00 0000000000000010 ffff880232927590 ffffffff810acb4a ffff8800b39bab00 ffffffff811a955a ffff8800b39bab10 0000000000000000 ffff88023155f098 ffffffff81a6b8c0 ffff88023155ea40 0000000000000007 Call Trace: [<ffffffff810acb4a>] ? snapshot_release+0x2a/0xb0 [<ffffffff811a955a>] ? __fput+0xca/0x1d0 [<ffffffff81080627>] ? task_work_run+0x97/0xd0 [<ffffffff81012d89>] ? do_notify_resume+0x69/0xa0 [<ffffffff8151452a>] ? int_signal+0x12/0x17 Code: 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 41 54 48 8b 05 ba 62 9c 00 49 bc 00 00 00 00 00 ea ff ff 48 8b 3d a1 62 9c 00 55 53 <48> 8b 10 48 89 50 18 48 8b 52 20 48 c7 40 28 00 00 00 00 c7 40 RIP [<ffffffff810a8cc1>] swsusp_free+0x21/0x190 RSP <ffff8800b3b17ea8> CR2: 0000000000000000 ---[ end trace f02be86a1ec0cccb ]--- due to forbidden_pages_map being NULL in swsusp_free(). Fixes: 6efde38f0769 "PM / Hibernate: Iterate over set bits instead of PFNs in swsusp_free()" Reported-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> commit a928f97152ea39c31f8ea89b60dd30a169d4ed6e Author: Peter Hüwe <PeterHuewe@gmx.de> Date: Fri Sep 12 21:09:47 2014 +0200 i2c: acpi: Fix NULL Pointer dereference If adapter->dev.parent == NULL there is a NULL pointer dereference in acpi_i2c_install_space_handler and acpi_i2c_remove_space_handler. This is present since introduction of this code: 366047515c6e "i2c: rework kernel config I2C_ACPI" or even da3c6647ee08 "I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI" The adapter->dev.parent == NULL case is valid for the i2c_stub, so loading i2c_stub with ACPI_I2C_OPREGION enabled results in an oops. This is also valid at least for i2c_tiny_usb and i2c_robotfuzz_osif. Fix by checking whether it is null before calling ACPI_HANDLE. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> commit c15d821ddb9dac9ac6b5beb75bf942f3bc3a4004 Author: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Date: Tue Sep 23 10:35:54 2014 +0800 gpio / ACPI: Use pin index and bit length Fix code when the operation region callback is for an gpio, which is not at index 0 and for partial pins in a GPIO definition. For example: Name (GMOD, ResourceTemplate () { //3 Outputs that define the Power mode of the device GpioIo (Exclusive, PullDown, , , , "\\_SB.GPI2") {10, 11, 12} }) } If opregion callback calls is for: - Set pin 10, then address = 0 and bit length = 1 - Set pin 11, then address = 1 and bit length = 1 - Set for both pin 11 and pin 12, then address = 1, bit length = 2 This change requires updated ACPICA gpio operation handler code to send the pin index and bit length. Fixes: 473ed7be0da0 (gpio / ACPI: Add support for ACPI GPIO operation regions) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+: 75ec6e55f138 ACPICA: Update to GPIO region handler interface. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> commit 75ec6e55f1384548311a13ce4fcb39c516053314 Author: Bob Moore <Robert.Moore@intel.com> Date: Tue Sep 23 10:35:47 2014 +0800 ACPICA: Update to GPIO region handler interface. Changes to correct several GPIO issues: 1) The update_rule in a GPIO field definition is now ignored; a read-modify-write operation is never performed for GPIO fields. (Internally, this means that the field assembly/disassembly code is completely bypassed for GPIO.) 2) The Address parameter passed to a GPIO region handler is now the bit offset of the field from a previous Connection() operator. Thus, it becomes a "Pin Number Index" into the Connection() resource descriptor. 3) The bit_width parameter passed to a GPIO region handler is now the exact bit width of the GPIO field. Thus, it can be interpreted as "number of pins". Overall, we can now say that the region handler interface to GPIO handlers is a raw "bit/pin" addressed interface, not a byte-addressed interface like the system_memory handler interface. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> commit 457920817e645a7dee42c2a75c81c5ed8e12ee1c Author: Fu Zhonghui <zhonghui.fu@linux.intel.com> Date: Wed Sep 24 22:42:26 2014 +0200 ACPI / platform / LPSS: disable async suspend/resume of LPSS devices On some systems (Asus T100 in particular) there are strict ordering dependencies between LPSS devices with respect to power management that break if they suspend/resume asynchronously. In theory it should be possible to follow those dependencies in the async suspend/resume case too (the ACPI tables tell as that the dependencies are there), but since we're missing infrastructure for that at the moment, disable async suspend/resume for all of the LPSS devices for the time being. Link: http://marc.info/?l=linux-acpi&m=141158962321905&w=2 Fixes: 8ce62f85a81f (ACPI / platform / LPSS: Enable async suspend/resume of LPSS devices) Signed-off-by: Li Aubrey <aubrey.li@linux.intel.com> Signed-off-by: Fu Zhonghui <zhonghui.fu@linux.intel.com> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> commit c7da579763f29cf45a861ad4c339aba590d8b80d Author: Johan Hedberg <johan.hedberg@intel.com> Date: Wed Sep 24 22:41:46 2014 +0300 Bluetooth: Add retransmission effort into SCO parameter table It is expected that new parameter combinations will have the retransmission effort value different between some entries (mainly because of the new S4 configuration added by HFP 1.7), so it makes sense to move it into the table instead of having it hard coded based on the selected SCO_AIRMODE_*. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> commit b2fc3f3c6d397d434174147eca3db1ec778195ce Author: Olof Johansson <olof@lixom.net> Date: Wed Sep 24 11:42:38 2014 -0700 drivers/soc: ti: fix build break with modules Fixes below build break by not switching to stubs when the driver is a module: drivers/soc/ti/knav_dma.c:418:7: error: redefinition of 'knav_dma_open_channel' void *knav_dma_open_channel(struct device *dev, const char *name, ^ In file included from drivers/soc/ti/knav_dma.c:26:0: include/linux/soc/ti/knav_dma.h:165:21: note: previous definition of 'knav_dma_open_channel' was here static inline void *knav_dma_open_channel(struct device *dev, const char *name, ^ Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 2d9251e3501356ceb44444a8f9a393b57163dc6a Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: multi_v7_defconfig: Enable Mediatek platform Enable Mediatek platform support for multi_v7_defconfig. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit d66820853251e8a9b53125a95a773e482cd79136 Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: mediatek: Add earlyprintk support for mt6589 Enable low-level debug for Mediatek mt6589 SoC on UART0. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 7e9b2828f25ec156623da0c2156604066de5514d Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mt6589: Change compatible string for GIC This patch changes the compatible string of the GIC to the new "arm,cortex-a7-gic" which does reflect the actual hardware. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 6e9cb2633698ddadd2493b3793dbc9723f570538 Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mediatek: Add compatible property for aquaris5 Add the missing 'compatible' property to device tree root node of - mt6589-aquaris5.dts and document the new values. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit d82df11466df3e0934c7e7aa2f5e08c284e1fd9d Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk Add boot argument for earlyprintk to the aquaris5 device tree file. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 510f1d72e526e776243397142cbcd459dd2a2efa Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: mt6589: Fix typo in GIC unit address This changes the unit address of the gic node to it's first register area. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 995425883e4087a4bfd61d12e442089d1201fc5c Author: Matthias Brugger <matthias.bgg@gmail.com> Date: Mon Aug 18 16:58:00 2014 +0200 ARM: dts: Build dtb for Mediatek board This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek SoC. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 00e978180b1fa211c30642139149ea448ff06c55 Author: Pawel Moll <pawel.moll@arm.com> Date: Mon Sep 15 15:33:48 2014 +0100 bus: arm-ccn: Fix spurious warning message Because CCN's cycle counter always runs, it will generate an interrupt on overflow even if the relevant perf event was not requested, causing a spurious warning message. Fixed now by warning on only normal counter unwanted overflows. Also cleaning the overflow mask at init now, not to warn on event previously requested by firmware. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 94e57fea62020dbf6e5d0093eabcd28366e86044 Author: Francesco Ruggeri <fruggeri@arista.com> Date: Wed Sep 24 10:12:41 2014 -0700 PCI: Move PCI_VENDOR_ID_VMWARE to pci_ids.h Move PCI_VENDOR_ID_VMWARE from device-specific files to pci_ids.h. It is useful to always have access to it, especially when accessing subsystem_vendor_id on emulated devices. [bhelgaas: keep pci_ids.h sorted and use lower-case hex] Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit 17497acbdce9506fd6a75115dee4ab80c3cc5ee5 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:50 2014 -0400 blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take above ten seconds when scsi-mq is used. [ 0.949892] scsi host0: Virtio SCSI HBA [ 1.007864] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.021299] scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz <stall> [ 16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 16.194099] osd: LOADED open-osd 0.2.1 [ 16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.208478] sd 0:0:0:0: [sda] Write Protect is off [ 16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.223264] sd 0:0:1:0: [sdb] Write Protect is off [ 16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA This is also the reason why request_queues start in bypass mode which is ended on blk_register_queue() as shutting down a fully functional queue also involves a RCU grace period and the queues for non-existent SCSI devices never reach registration. blk-mq basically needs to do the same thing - start the mq in a degraded mode which is faster to shut down and then make it fully functional only after the queue reaches registration. percpu_ref recently grew facilities to force atomic operation until explicitly switched to percpu mode, which can be used for this purpose. This patch makes blk-mq initialize q->mq_usage_counter in atomic mode and switch it to percpu mode only once blk_register_queue() is reached. Note that this issue was previously worked around by 0a30288da1ae ("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe") for v3.17. The temp fix was reverted in preparation of adding persistent atomic mode to percpu_ref by 9eca80461a45 ("Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe""). This patch and the prerequisite percpu_ref changes will be merged during v3.18 devel cycle. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christoph Hellwig <hch@infradead.org> Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> commit e4de4d412fc0d07f820906dcd70ede06dad312e2 Author: Olof Johansson <olof@lixom.net> Date: Wed Sep 24 10:34:06 2014 -0700 ARM: at91: Fix bad conflict resolution in board-dt-sama5.c Signed-off-by: Olof Johansson <olof@lixom.net> commit 3c9703a87bdda1fef221ab0957a3ec2a2126f129 Author: Olof Johansson <olof@lixom.net> Date: Wed Sep 24 10:32:20 2014 -0700 Revert "ARM: make arrays containing machine compatible strings const" I dropped it from next/cleanup, doing a revert on for-next instead of rebuilding the branch. This reverts commit fbce9bc876ab2c905f1f82a78bc25745e98760d9. commit 1cae13e75b7a7848c03138636d4eb8d8a5054dd5 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:50 2014 -0400 percpu_ref: make INIT_ATOMIC and switch_to_atomic() sticky Currently, a percpu_ref which is initialized with PERPCU_REF_INIT_ATOMIC or switched to atomic mode via switch_to_atomic() automatically reverts to percpu mode on the first percpu_ref_reinit(). This makes the atomic mode difficult to use for cases where a percpu_ref is used as a persistent on/off switch which may be cycled multiple times. This patch makes such atomic state sticky so that it survives through kill/reinit cycles. After this patch, atomic state is cleared only by an explicit percpu_ref_switch_to_percpu() call. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> commit 2aad2a86f6685c10360ec8a5a55eb9ab7059cb72 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:50 2014 -0400 percpu_ref: add PERCPU_REF_INIT_* flags With the recent addition of percpu_ref_reinit(), percpu_ref now can be used as a persistent switch which can be turned on and off repeatedly where turning off maps to killing the ref and waiting for it to drain; however, there currently isn't a way to initialize a percpu_ref in its off (killed and drained) state, which can be inconvenient for certain persistent switch use cases. Similarly, percpu_ref_switch_to_atomic/percpu() allow dynamic selection of operation mode; however, currently a newly initialized percpu_ref is always in percpu mode making it impossible to avoid the latency overhead of switching to atomic mode. This patch adds @flags to percpu_ref_init() and implements the following flags. * PERCPU_REF_INIT_ATOMIC : start ref in atomic mode * PERCPU_REF_INIT_DEAD : start ref killed and drained These flags should be able to serve the above two use cases. v2: target_core_tpg.c conversion was missing. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> commit f47ad45784611297b699f3dffb6c7222b76afe64 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:49 2014 -0400 percpu_ref: decouple switching to percpu mode and reinit percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out percpu mode switching into percpu_ref_switch_to_percpu() and reimplements percpu_ref_reinit() on top of it. * DEAD still requires ATOMIC. A dead ref can't be switched to percpu mode w/o going through reinit. v2: __percpu_ref_switch_to_percpu() was missing static. Fixed. Reported by Fengguang aka kbuild test robot. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: kbuild test robot <fengguang.wu@intel.com> commit 490c79a65708873228cf114cf00e32c204e4e907 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:49 2014 -0400 percpu_ref: decouple switching to atomic mode and killing percpu_ref has treated the dropping of the base reference and switching to atomic mode as an integral operation; however, there's nothing inherent tying the two together. The use cases for percpu_ref have been expanding continuously. While the current init/kill/reinit/exit model can cover a lot, the coupling of kill/reinit with atomic/percpu mode switching is turning out to be too restrictive for use cases where many percpu_refs are created and destroyed back-to-back with only some of them reaching extended operation. The coupling also makes implementing always-atomic debug mode difficult. This patch separates out atomic mode switching into percpu_ref_switch_to_atomic() and reimplements percpu_ref_kill_and_confirm() on top of it. * The handling of __PERCPU_REF_ATOMIC and __PERCPU_REF_DEAD is now differentiated. Among get/put operations, percpu_ref_tryget_live() is the only one which cares about DEAD. * percpu_ref_switch_to_atomic() can be called multiple times on the same ref. This means that multiple @confirm_switch may get queued up which we can't do reliably without extra memory area. This is handled by making the later invocation synchronously wait for the completion of the previous one. This isn't particularly desirable but such synchronous waits shouldn't happen in most cases. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Johannes Weiner <hannes@cmpxchg.org> commit 27344a9017cdaff82a167827da3001a0918afdc3 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:49 2014 -0400 percpu_ref: add PCPU_REF_DEAD percpu_ref will be restructured so that percpu/atomic mode switching and reference killing are dedoupled. In preparation, add PCPU_REF_DEAD and PCPU_REF_ATOMIC_DEAD which is OR of ATOMIC and DEAD. For now, ATOMIC and DEAD are changed together and all PCPU_REF_ATOMIC uses are converted to PCPU_REF_ATOMIC_DEAD without causing any behavior changes. percpu_ref_init() now specifies an explicit alignment when allocating the percpu counters so that the pointer has enough unused low bits to accomodate the flags. Note that one flag was fine as min alignment for percpu memory is 2 bytes but two flags are already too many for the natural alignment of unsigned longs on archs like cris and m68k. v2: The original patch had BUILD_BUG_ON() which triggers if unsigned long's alignment isn't enough to accomodate the flags, which triggered on cris and m64k. percpu_ref_init() updated to specify the required alignment explicitly. Reported by Fengguang. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> Cc: kbuild test robot <fengguang.wu@intel.com> commit 9e804d1f58da1eca079f796347c1cf1d1df564e2 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: rename things to prepare for decoupling percpu/atomic mode switch percpu_ref will be restructured so that percpu/atomic mode switching and reference killing are dedoupled. In preparation, do the following renames. * percpu_ref->confirm_kill -> percpu_ref->confirm_switch * __PERCPU_REF_DEAD -> __PERCPU_REF_ATOMIC * __percpu_ref_alive() -> __ref_is_percpu() This patch is pure rename and doesn't introduce any functional changes. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> commit eecc16ba9a49b05dd847a317af166a6728eb56ca Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: replace pcpu_ prefix with percpu_ percpu_ref uses pcpu_ prefix for internal stuff and percpu_ for externally visible ones. This is the same convention used in the percpu allocator implementation. It works fine there but percpu_ref doesn't have too much internal-only stuff and scattered usages of pcpu_ prefix are confusing than helpful. This patch replaces all pcpu_ prefixes with percpu_. This is pure rename and there's no functional change. Note that PCPU_REF_DEAD is renamed to __PERCPU_REF_DEAD to signify that the flag is internal. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> commit 6251f9976af7656b6970a8820153f356430f5de2 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: minor code and comment updates * Some comments became stale. Updated. * percpu_ref_tryget() unnecessarily initializes @ret. Removed. * A blank line removed from percpu_ref_kill_rcu(). * Explicit function name in a WARN format string replaced with __func__. * WARN_ON() in percpu_ref_reinit() converted to WARN_ON_ONCE(). Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> commit a2237370194484ee6aeeff04b617e4b14d178966 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:31:48 2014 -0400 percpu_ref: relocate percpu_ref_reinit() percpu_ref is gonna go through restructuring. Move percpu_ref_reinit() after percpu_ref_kill_and_confirm(). This will make later changes easier to follow and result in cleaner organization. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Kent Overstreet <kmo@daterainc.com> commit 1aafa57340c6d906a285d7823e0fe68696c1ae07 Author: Wei Xu <xuwei5@hisilicon.com> Date: Wed Sep 24 17:07:48 2014 +0800 ARM: hisi: Fix platmcpm compilation when ARMv6 is selected When compiling with "ARCH=arm" and "allmodconfig", with commit: 9cdc99919a95e8b54c1998b65bb1bfdabd47d27b [2/7] ARM: hisi: enable MCPM implementation we will get: /tmp/cc6DjYjT.s: Assembler messages: /tmp/cc6DjYjT.s:63: Error: selected processor does not support ARM mode `ubfx r1,r0,#8,#8' /tmp/cc6DjYjT.s:761: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:762: Error: selected processor does not support ARM mode `dsb ' /tmp/cc6DjYjT.s:769: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:775: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:776: Error: selected processor does not support ARM mode `dsb ' /tmp/cc6DjYjT.s:795: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:801: Error: selected processor does not support ARM mode `isb ' /tmp/cc6DjYjT.s:802: Error: selected processor does not support ARM mode `dsb ' Fix platmcpm compilation when ARMv6 is selected. Signed-off-by: Wei Xu <xuwei5@hisilicon.com> Signed-off-by: Olof Johansson <olof@lixom.net> commit 495aa2e1facebf770224c33aae2a01541889e54e Author: Liviu Dudau <Liviu.Dudau@arm.com> Date: Tue Sep 23 20:01:14 2014 +0100 arm64: Add architectural support for PCI Use the generic PCI domain and OF functions to provide support for PCI on arm64. [bhelgaas: Change comments to use generic PCI, not just PCIe. Nothing at this level is PCIe-specific.] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> commit b766eafe68281a12169f9eb8c06fd80d2e7897d7 Author: Liviu Dudau <Liviu.Dudau@arm.com> Date: Tue Sep 23 20:01:13 2014 +0100 PCI: Add pci_remap_iospace() to map bus I/O resources Add pci_remap_iospace() to map bus I/O resources into the CPU virtual address space. Architectures with special needs may provide their own version, but most should be able to use this one. This function is useful for PCI host bridge drivers that need to map the PCI I/O resources into virtual memory space. [bhelgaas: phys_addr description, drop temporary "err" variable] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> CC: Arnd Bergmann <arnd@arndb.de> commit 5a4f662d44116022e3378b32a1a79b718e110096 Author: Liviu Dudau <Liviu.Dudau@arm.com> Date: Tue Sep 23 20:01:12 2014 +0100 PCI: Assign unassigned bus resources in pci_scan_root_bus() If the firmware has not assigned all the bus resources and we are not just probing the PCI buses, it makes sense to assign the unassigned resources in pci_scan_root_bus(). Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> CC: Rob Herring <robh+dt@kernel.org> commit 07428b62addb624a3b51b6e8a213fec9b97dbfd0 Author: Liviu Dudau <Liviu.Dudau@arm.com> Date: Wed Sep 24 11:27:33 2014 -0600 of/pci: Add support for parsing PCI host bridge resources from DT Provide a function to parse the PCI DT ranges that can be used to create a pci_host_bridge structure together with its associated bus. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com> [make io_base parameter optional] Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grant Likely <grant.likely@linaro.org> CC: Rob Herring <robh+dt@kernel.org> CC: Catalin Marinas <catalin.marinas@arm.com> commit 9eca80461a45177e456219a9cd944c27675d6512 Author: Tejun Heo <tj@kernel.org> Date: Wed Sep 24 13:07:33 2014 -0400 Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe" This reverts commit 0a30288da1aec914e158c2d7a3482a85f632750f, which was a temporary fix for SCSI blk-mq stall issue. The following patches will fix the issue properly by introducing atomic mode to percpu_ref. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> commit 83417b202bf5aa2cd82637aa81aa9f065cfe5f21 Author: Wolfram Sang <wsa@the-dreams.de> Date: Mon Sep 22 19:41:00 2014 +0200 i2c: move acpi code back into the core Commit 5d98e61d337c ("I2C/ACPI: Add i2c ACPI operation region support") renamed the i2c-core module. This may cause regressions for distributions, so put the ACPI code back into the core. Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Lan Tianyu <tianyu.lan@intel.com> commit 964356938fcd3c0001a786f55b9f0a0fbe47656a Author: Andreas Werner <andreas.werner@men.de> Date: Wed Aug 27 19:53:06 2014 +0200 hwmon: (menf21bmc) Introduce MEN14F021P00 BMC HWMON driver Added driver to support the 14F021P00 BMC Hardware Monitoring. The BMC is a Board Management Controller including monitoring of the board voltages. Signed-off-by: Andreas Werner <andreas.werner@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit 38433639af915deeb0b0e28462dd740ce57b72fd Author: Andreas Werner <andreas.werner@men.de> Date: Wed Aug 27 19:52:36 2014 +0200 leds: leds-menf21bmc: Introduce MEN 14F021P00 BMC LED driver Added driver to support the 14F021P00 BMC LEDs. The BMC is a Board Management Controller including four LEDs which can be switched on and off. Signed-off-by: Andreas Werner <andreas.werner@men.de> Acked-by: Bryan Wu <cooloney@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit 5033263992eece84e19946d2cab940c86ec862ba Author: Andreas Werner <andreas.werner@men.de> Date: Wed Aug 27 19:52:06 2014 +0200 watchdog: menf21bmc_wdt: Introduce MEN 14F021P00 BMC Watchdog driver Added driver to support the 14F021P00 BMC Watchdog. The BMC is a Board Management Controller including watchdog functionality. Signed-off-by: Andreas Werner <andreas.werner@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit d6cc1f5824cbca392d099f3bb0c441efd9e54de9 Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Fri Sep 12 08:54:00 2014 +0200 Documentation: charger: max14577: Document exported sysfs entry Document the 'fast charge timer' setting exported by max14577 driver through sysfs entry. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit 8d70d68d7a1b3082ca5a3808be18103a83ae348d Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Fri Sep 12 08:53:59 2014 +0200 devicetree: mfd: max14577: Add device tree bindings document Add document describing device tree bindings for MAX14577 MFD drivers: MFD core, extcon, regulator and charger. Both MAX14577 and MAX77836 chipsets are documented. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit 2c33e9296202cd11bf2e2f801b69ffba0953748a Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Fri Sep 12 08:53:58 2014 +0200 power: max17040: Add ID for MAX77836 Fuel Gauge block MAX77836 has the same Fuel Gauge as MAX17040/17048. The max17040 driver can be safely re-used. The patch adds MAX77836 device to the array of i2c_device_id. Additionally it removes the id associated with MAX17040 device as the value is not used. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit e30110e9c96f48aea01abc3e6dfadb369cbafec3 Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Fri Sep 12 08:53:57 2014 +0200 charger: max14577: Configure battery-dependent settings from DTS and sysfs Remove hard-coded values for: - Fast Charge current, - End Of Charge current, - Fast Charge timer, - Overvoltage Protection Threshold, - Battery Constant Voltage, and use DTS or sysfs to configure them. This allows using the max14577 charger driver with different batteries. Now the charger driver requires valid configuration data from DTS. In case of wrong configuration data it fails during probe. The fast charge timer is configured through sysfs entry. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit b8f139f68f2099b7f8b4ef470a1e53210e3aa025 Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Fri Sep 12 08:53:56 2014 +0200 regulator/mfd: max14577: Export symbols for calculating charger current This patch prepares for changing the max14577 charger driver to allow configuring battery-dependent settings from DTS. The patch moves from regulator driver to MFD core driver and exports: - function for calculating register value for charger's current; - table of limits for chargers (MAX14577, MAX77836). Previously they were used only by the max14577 regulator driver. In next patch the charger driver will use them as well. Exporting them will reduce unnecessary code duplication. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mark Brown <broonie@linaro.org> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit 3682a8ee87f9107253e51733f42da10160ce41e3 Author: Krzysztof Kozlowski <k.kozlowski@samsung.com> Date: Fri Sep 12 08:53:55 2014 +0200 charger: max14577: Add support for MAX77836 charger Add support for MAX77836 charger to the max14577 driver. The MAX77836 charger is almost the same as 14577 model except: - No dead-battery detection; - Support for special charger (like in MAX77693); - Support for DX over-voltage protection (like in MAX77693); - Lower values of charging current (two times lower current for slow/fast charge, much lower EOC current); - Slightly different values in ChgTyp field of STATUS2 register. On MAX14577 0x6 is reserved and 0x7 dead battery. On the MAX77836 the 0x6 means special charger and 0x7 is reserved. Regardless of these differences the driver maps them to one enum max14577_muic_charger_type. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> commit 2f4096e311ef0922c42cbf7bc5df44efb3aff716 Author: Quentin Lambert <lambert.quentin@gmail.com> Date: Sun Sep 7 20:04:28 2014 +0200 PCI: Remove assignment from complicated "if" conditions The modifications effectively change the value of len_tmp in the case where the first condition is not met. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit 79e50e72986c9fcb06d707ce587cfd24fefa33e3 Author: Quentin Lambert <lambert.quentin@gmail.com> Date: Sun Sep 7 20:03:32 2014 +0200 PCI: Remove assignment from "if" conditions The following Coccinelle semantic patch was used to find and correct cases of assignments in "if" conditions: @@ expression var, expr; statement S; @@ + var = expr; if( - (var = expr) + var ) S Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit 656f978f9af9d8d77436e8159f51f7aa1e673309 Author: Quentin Lambert <lambert.quentin@gmail.com> Date: Sun Sep 7 20:02:47 2014 +0200 PCI: Remove unnecessary curly braces Remove curly braces in simple "if" cases. No functional change. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit e0c524049f8279d00d2fbd4748b03234a2726fdd Author: Santosh Shilimkar <santosh.shilimkar@ti.com> Date: Thu Jul 10 11:30:08 2014 -0400 MAINTAINERS: Add Keystone Multicore Navigator drivers entry Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> commit 88139ed030583557751e279968e13e892ae10825 Author: Santosh Shilimkar <santosh.shilimkar@ti.com> Date: Sun Mar 30 17:29:04 2014 -0400 soc: ti: add Keystone Navigator DMA support The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> commit 8172296d8717be1951da4bb4feb2700a60e8cdde Author: Santosh Shilimkar <santosh.shilimkar@ti.com> Date: Sun Mar 30 17:29:04 2014 -0400 Documentation: dt: soc: add Keystone Navigator DMA bindings The Keystone Navigator DMA driver sets up the dma channels and flows for the QMSS(Queue Manager SubSystem) who triggers the actual data movements across clients using destination queues. Every client modules like NETCP(Network Coprocessor), SRIO(Serial Rapid IO) and CRYPTO Engines has its own instance of packet dma hardware. QMSS has also an internal packet DMA module which is used as an infrastructure DMA with zero copy. Initially this driver was proposed as DMA engine driver but since the hardware is not typical DMA engine and hence doesn't comply with typical DMA engine driver needs, that approach was naked. Link to that discussion - https://lkml.org/lkml/2014/3/18/340 As aligned, now we pair the Navigator DMA with its companion Navigator QMSS subsystem driver. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> commit 41f93af900a20d1a0a358b522b5129c89677e9dc Author: Sandeep Nair <sandeep_n@ti.com> Date: Fri Feb 28 10:47:50 2014 -0500 soc: ti: add Keystone Navigator QMSS driver The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. The QMSS driver manages the PDSP setups, linking RAM regions, queue pool management (allocation, push, pop and notify) and descriptor pool management. The specifics on the device tree bindings for QMSS can be found in: Documentation/devicetree/bindings/soc/keystone-navigator-qmss.txt Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> commit a4dfb8c41043dd6c2b9defbe846c44389c4b6f02 Author: Sandeep Nair <sandeep_n@ti.com> Date: Fri Feb 28 10:47:50 2014 -0500 Documentation: dt: soc: add Keystone Navigator QMSS bindings The QMSS (Queue Manager Sub System) found on Keystone SOCs is one of the main hardware sub system which forms the backbone of the Keystone Multi-core Navigator. QMSS consist of queue managers, packed-data structure processors(PDSP), linking RAM, descriptor pools and infrastructure Packet DMA. The Queue Manager is a hardware module that is responsible for accelerating management of the packet queues. Packets are queued/de-queued by writing or reading descriptor address to a particular memory mapped location. The PDSPs perform QMSS related functions like accumulation, QoS, or event management. Linking RAM registers are used to link the descriptors which are stored in descriptor RAM. Descriptor RAM is configurable as internal or external memory. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Sandeep Nair <sandeep_n@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> commit 382a9c9adc1cd540f5b714b65db315fc1c0b553d Author: Quentin Lambert <lambert.quentin@gmail.com> Date: Sun Sep 7 20:02:04 2014 +0200 PCI: Add space before open parenthesis Add space before open parenthesis as is conventional. No functional change. [bhelgaas: fix a few more in ibmphp, shpchp] Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit fe6ce32189136370b3d236d1c32ab812b93cd0d8 Author: Yijing Wang <wangyijing@huawei.com> Date: Wed Sep 24 11:09:59 2014 +0800 PCI/MSI: Rename __read_msi_msg() to read_msi_msg() Rename __read_msi_msg() to read_msi_msg(). No functional change. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit c2eb2dc3461e522d6452e1f74e36194633d4db0d Author: Yijing Wang <wangyijing@huawei.com> Date: Wed Sep 24 11:09:53 2014 +0800 PCI/MSI: Remove unused read_msi_msg() Now no one uses read_msi_msg(), so remove it. No functional change. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> commit 11c013fd8afbc7c6b2e15608ed5fc2c249552998 Author: Yijing Wang <wangyijing@huawei.com> Date: Wed Sep 24 11:09:45 2014 +0800 MSI/powerpc: Use __read_msi_msg() instead of read_msi_msg() rtas_setup_msi_irqs() already has the struct msi_desc pointer required by __read_msi_msg(), so call it directly instead of having read_msi_msg() look it up from the IRQ. No functional change. [bhelgaas: changelog] Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: linuxppc-dev@lists.ozlabs.org commit eeeda4cd06e828b331b15741a204ff9f5874d28d Author: Ben Hutchings <ben@decadent.org.uk> Date: Wed Sep 24 13:30:12 2014 +0100 x86/relocs: Make per_cpu_load_addr static per_cpu_load_addr is only used for 64-bit relocations, but is declared in both configurations of relocs.c - with different types. This has undefined behaviour in general. GNU ld is documented to use the larger size in this case, but other tools may differ and some warn about this. References: https://bugs.debian.org/748577 Reported-by: Michael Tautschnig <mt@debian.org> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: 748577@bugs.debian.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1411561812.3659.23.camel@decadent.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org> commit 212be3b2320bcf33eff648bc4e1f0edbf4d90acf Author: Oleg Nesterov <oleg@redhat.com> Date: Sun Sep 21 20:42:32 2014 +0200 x86/lib/Makefile: Remove the unnecessary "+= thunk_64.o" Trivial. We have "lib-y += thunk_$(BITS).o" at the start, no need to add thunk_64.o if !CONFIG_X86_32. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140921184232.GB23727@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> commit 0ad6e3c5199be12c9745da8f8b9e3c9f8066c235 Author: Oleg Nesterov <oleg@redhat.com> Date: Sun Sep 21 20:41:53 2014 +0200 x86: Speed up ___preempt_schedule*() by using THUNK helpers ___preempt_schedule() does SAVE_ALL/RESTORE_ALL but this is suboptimal, we do not need to save/restore the callee-saved register. And we already have arch/x86/lib/thunk_*.S which implements the similar asm wrappers, so it makes sense to redefine ___preempt_schedule() as "THUNK ..." and remove preempt.S altogether. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Andy Lutomirski <luto@amacapital.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140921184153.GA23727@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> commit 03bd4e1f7265548832a76e7919a81f3137c44fd1 Author: Wanpeng Li <wanpeng.li@linux.intel.com> Date: Wed Sep 24 16:38:05 2014 +0800 sched: Fix unreleased llc_shared_mask bit during CPU hotplug The following bug can be triggered by hot adding and removing a large number of xen domain0's vcpus repeatedly: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group PGD 5a9d5067 PUD 13067 PMD 0 Oops: 0000 [#3] SMP [...] Call Trace: load_balance ? _raw_spin_unlock_irqrestore idle_balance __schedule schedule schedule_timeout ? lock_timer_base schedule_timeout_uninterruptible msleep lock_device_hotplug_sysfs online_store dev_attr_store sysfs_write_file vfs_write SyS_write system_call_fastpath Last level cache shared mask is built during CPU up and the build_sched_domain() routine takes advantage of it to setup the sched domain CPU topology. However, llc_shared_mask is not released during CPU disable, which leads to an invalid sched domainCPU topology. This patch fix it by releasing the llc_shared_mask correctly during CPU disable. Yasuaki also reported that this can happen on real hardware: https://lkml.org/lkml/2014/7/22/1018 His case is here: == Here is an example on my system. My system has 4 sockets and each socket has 15 cores and HT is enabled. In this case, each core of sockes is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-44, 90-104 Socket#3 | 45-59, 105-119 Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-44 and 90-104. When hot-removing socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains having 0x3fff80000001fffc0000000. After that, when hot-adding socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-59 Socket#3 | 90-119 Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-59 and 90-104. So the mask has the wrong value. Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by: Linn Crosetto <linn@hp.com> Reviewed-by: Borislav Petkov <bp@suse.de> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org> commit 24832b4de315ad00e5430a53772750dfcf18514d Author: Minghuan Lian <Minghuan.Lian@freescale.com> Date: Tue Sep 23 22:28:59 2014 +0800 PCI: designware: Add get_msi_data() to pcie_host_ops Add a struct pcie_host_ops .get_msi_data() method for platforms to return their special MSI message data. Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> commit ee1b5b165c0a2f04d2107e634e51f05d0eb107de Author: Bryan O'Donoghue <pure.logic@nexus-software.ie> Date: Wed Sep 24 00:26:24 2014 +0100 x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead Quark x1000 advertises PGE via the standard CPUID method PGE bits exist in Quark X1000's PTEs. In order to flush an individual PTE it is necessary to reload CR3 irrespective of the PTE.PGE bit. See Quark Core_DevMan_001.pdf section 6.4.11 This bug was fixed in Galileo kernels, unfixed vanilla kernels are expected to crash and burn on this platform. Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Borislav Petkov <bp@alien8.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1411514784-14885-1-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Ingo Molnar <mingo@kernel.org> commit 450e344e421b9f555261a2d97952d9e71d4cb082 Author: Minghuan Lian <Minghuan.Lian@freescale.com> Date: Tue Sep 23 22:28:58 2014 +0800 PCI: designware: Rename get_msi_data() to get_msi_addr() The struct pcie_host_ops .get_msi_data() method returns the MSI message address. To accurately express its purpose, rename it to .get_msi_addr(). Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Mohit KUMAR <mohit.kumar@st.com> commit 0c61ea77cceafd1134225099961c2df0866b500f Author: Minghuan Lian <Minghuan.Lian@fre…

WARNING: line over 80 characters torvalds#25: FILE: include/linux/compiler-gcc5.h:2: +#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead." WARNING: please, no space before tabs torvalds#29: FILE: include/linux/compiler-gcc5.h:6: +#define __must_check ^I^I__attribute__((warn_unused_result))$ ERROR: space required after that ',' (ctx:VxV) torvalds#30: FILE: include/linux/compiler-gcc5.h:7: +#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) ^ ERROR: space required after that ',' (ctx:VxV) torvalds#30: FILE: include/linux/compiler-gcc5.h:7: +#define __compiler_offsetof(a,b) __builtin_offsetof(a,b) ^ total: 2 errors, 2 warnings, 66 lines checked ./patches/kernel-add-support-for-gcc-5.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ torvalds#29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1fc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 1ca5614 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP") Cc: stable@vger.kernel.org Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: John Allen <john.allen@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Run BPF selftests bpf_tcp_ca on loongarch: # ./test_progs -t bpf_tcp_ca A "Segmentation fault" error occurs: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because "link" is NULL in that case. This patch adds null checks for link in bpf_tcp_ca to fix this error. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Run BPF selftests bpf_tcp_ca on Loongarch: ./test_progs -t bpf_tcp_ca A "Segmentation fault" error occurs: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because "link" is NULL in that case. This patch adds null checks for link in bpf_tcp_ca to fix this error. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Several test cases create a bpf_link from a struct_ops but attempt to use it without first error-checking. This results is segfaults if the arch does not yet support BPF struct_ops (e.g. mips64el): # ./test_progs -n 29/9 test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 do_test:PASS:socket 0 nsec do_test:PASS:socket 0 nsec settcpca:FAIL:setsockopt unexpected setsockopt: actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: <backtrace not supported> [17900.243360] do_page_fault(): sending SIGSEGV to test_progs for invalid read access from 0000000000000020 [17900.243799] epc = 00000001204f817c in test_progs[4f817c,120000000+c53000] [17900.244209] ra = 00000001204f8108 in test_progs[4f8108,120000000+c53000] Segmentation fault Add the missing error handling to allow these tests to fail gracefully. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>

Several test cases create a bpf_link from a struct_ops but attempt to use it without first error-checking. This results is segfaults if the arch does not yet support BPF struct_ops (e.g. mips64el): # ./test_progs -n 29/9 test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 do_test:PASS:socket 0 nsec do_test:PASS:socket 0 nsec settcpca:FAIL:setsockopt unexpected setsockopt: actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: <backtrace not supported> [17900.243360] do_page_fault(): sending SIGSEGV to test_progs for invalid read access from 0000000000000020 [17900.243799] epc = 00000001204f817c in test_progs[4f817c,120000000+c53000] [17900.244209] ra = 00000001204f8108 in test_progs[4f8108,120000000+c53000] Segmentation fault Add the missing error handling to allow these tests to fail gracefully. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>

Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because "link" returned by bpf_map__attach_struct_ops() is NULL in this case. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "err" to destroy the skel. v2: - use "goto err" instead of "return" as Eduard suggested. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Although the "Segmentation fault" errors are fixed in the last commit, run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, still some other "ENOTSUPP" (-524) errors left since lacking BPF trampoline on Loongarch: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL torvalds#29/3 bpf_tcp_ca/invalid_license:OK test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL torvalds#29/5 bpf_tcp_ca/rel_setsockopt:OK test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL torvalds#29/7 bpf_tcp_ca/incompl_cong_ops:OK torvalds#29/8 bpf_tcp_ca/unsupp_cong_op:OK test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL test_update_wrong:PASS:open 0 nsec test_update_wrong:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/10 bpf_tcp_ca/update_wrong:FAIL test_mixed_links:PASS:open 0 nsec test_mixed_links:FAIL:attach_struct_ops_nl unexpected error: -524 test_mixed_links:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/11 bpf_tcp_ca/mixed_links:FAIL test_multi_links:PASS:open 0 nsec test_multi_links:FAIL:attach_struct_ops_1st unexpected error: -524 test_multi_links:FAIL:attach_struct_ops_2nd unexpected error: -524 torvalds#29/12 bpf_tcp_ca/multi_links:FAIL test_link_replace:PASS:open 0 nsec test_link_replace:FAIL:attach_struct_ops_1st unexpected error: -524 test_link_replace:FAIL:attach_struct_ops_2nd unexpected error: -524 torvalds#29/13 bpf_tcp_ca/link_replace:FAIL torvalds#29/14 bpf_tcp_ca/tcp_ca_kfunc:OK test_cc_cubic:PASS:bpf_cc_cubic__open_and_load 0 nsec test_cc_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/15 bpf_tcp_ca/cc_cubic:FAIL torvalds#29 bpf_tcp_ca:FAIL ''' Just like in ASSERT_OK(), this patch skips ENOTSUPP (524) and ENOTSUP (95) in ASSERT_OK_PTR() too. With this change, the new output of bpf_tcp_ca selftests look like: ''' torvalds#29/1 bpf_tcp_ca/dctcp:SKIP torvalds#29/2 bpf_tcp_ca/cubic:SKIP torvalds#29/3 bpf_tcp_ca/invalid_license:OK torvalds#29/4 bpf_tcp_ca/dctcp_fallback:SKIP torvalds#29/5 bpf_tcp_ca/rel_setsockopt:OK torvalds#29/6 bpf_tcp_ca/write_sk_pacing:SKIP torvalds#29/7 bpf_tcp_ca/incompl_cong_ops:OK torvalds#29/8 bpf_tcp_ca/unsupp_cong_op:OK torvalds#29/9 bpf_tcp_ca/update_ca:SKIP torvalds#29/10 bpf_tcp_ca/update_wrong:SKIP torvalds#29/11 bpf_tcp_ca/mixed_links:SKIP torvalds#29/12 bpf_tcp_ca/multi_links:SKIP torvalds#29/13 bpf_tcp_ca/link_replace:SKIP torvalds#29/14 bpf_tcp_ca/tcp_ca_kfunc:OK torvalds#29/15 bpf_tcp_ca/cc_cubic:SKIP torvalds#29 bpf_tcp_ca:OK (SKIP: 10/15) ''' Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because "link" returned by bpf_map__attach_struct_ops() is NULL in this case. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "err" to destroy the skel. v2: - use "goto err" instead of "return" as Eduard suggested. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Although the "Segmentation fault" errors are fixed in the last commit, run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, still some other "ENOTSUPP" (-524) errors left since lacking BPF trampoline on Loongarch: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL torvalds#29/3 bpf_tcp_ca/invalid_license:OK test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL torvalds#29/5 bpf_tcp_ca/rel_setsockopt:OK test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL torvalds#29/7 bpf_tcp_ca/incompl_cong_ops:OK torvalds#29/8 bpf_tcp_ca/unsupp_cong_op:OK test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL test_update_wrong:PASS:open 0 nsec test_update_wrong:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/10 bpf_tcp_ca/update_wrong:FAIL test_mixed_links:PASS:open 0 nsec test_mixed_links:FAIL:attach_struct_ops_nl unexpected error: -524 test_mixed_links:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/11 bpf_tcp_ca/mixed_links:FAIL test_multi_links:PASS:open 0 nsec test_multi_links:FAIL:attach_struct_ops_1st unexpected error: -524 test_multi_links:FAIL:attach_struct_ops_2nd unexpected error: -524 torvalds#29/12 bpf_tcp_ca/multi_links:FAIL test_link_replace:PASS:open 0 nsec test_link_replace:FAIL:attach_struct_ops_1st unexpected error: -524 test_link_replace:FAIL:attach_struct_ops_2nd unexpected error: -524 torvalds#29/13 bpf_tcp_ca/link_replace:FAIL torvalds#29/14 bpf_tcp_ca/tcp_ca_kfunc:OK test_cc_cubic:PASS:bpf_cc_cubic__open_and_load 0 nsec test_cc_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/15 bpf_tcp_ca/cc_cubic:FAIL torvalds#29 bpf_tcp_ca:FAIL ''' Just like in ASSERT_OK(), this patch uses test_progs_get_error() helper to skip ENOTSUPP (524) and ENOTSUP (95) in ASSERT_OK_PTR() too. With this change, the new output of bpf_tcp_ca selftests look like: ''' torvalds#29/1 bpf_tcp_ca/dctcp:SKIP torvalds#29/2 bpf_tcp_ca/cubic:SKIP torvalds#29/3 bpf_tcp_ca/invalid_license:OK torvalds#29/4 bpf_tcp_ca/dctcp_fallback:SKIP torvalds#29/5 bpf_tcp_ca/rel_setsockopt:OK torvalds#29/6 bpf_tcp_ca/write_sk_pacing:SKIP torvalds#29/7 bpf_tcp_ca/incompl_cong_ops:OK torvalds#29/8 bpf_tcp_ca/unsupp_cong_op:OK torvalds#29/9 bpf_tcp_ca/update_ca:SKIP torvalds#29/10 bpf_tcp_ca/update_wrong:SKIP torvalds#29/11 bpf_tcp_ca/mixed_links:SKIP torvalds#29/12 bpf_tcp_ca/multi_links:SKIP torvalds#29/13 bpf_tcp_ca/link_replace:SKIP torvalds#29/14 bpf_tcp_ca/tcp_ca_kfunc:OK torvalds#29/15 bpf_tcp_ca/cc_cubic:SKIP torvalds#29 bpf_tcp_ca:OK (SKIP: 10/15) ''' Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>

Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com>

Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

[ Upstream commit e64746e ] cpumask_of_node() can be called for NUMA_NO_NODE inside do_map_benchmark() resulting in the following sanitizer report: UBSAN: array-index-out-of-bounds in ./arch/x86/include/asm/topology.h:72:28 index -1 is out of range for type 'cpumask [64][1]' CPU: 1 PID: 990 Comm: dma_map_benchma Not tainted 6.9.0-rc6 torvalds#29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) ubsan_epilogue (lib/ubsan.c:232) __ubsan_handle_out_of_bounds (lib/ubsan.c:429) cpumask_of_node (arch/x86/include/asm/topology.h:72) [inline] do_map_benchmark (kernel/dma/map_benchmark.c:104) map_benchmark_ioctl (kernel/dma/map_benchmark.c:246) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Use cpumask_of_node() in place when binding a kernel thread to a cpuset of a particular node. Note that the provided node id is checked inside map_benchmark_ioctl(). It's just a NUMA_NO_NODE case which is not handled properly later. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Acked-by: Barry Song <baohua@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eef0532 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 468e329 upstream. Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ torvalds#29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1fc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 1ca5614 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP") Cc: stable@vger.kernel.org Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: John Allen <john.allen@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eef0532 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 468e329 upstream. Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ torvalds#29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1fc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 1ca5614 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP") Cc: stable@vger.kernel.org Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: John Allen <john.allen@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eef0532 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 468e329 upstream. Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ torvalds#29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x1fc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Fixes: 1ca5614 ("crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP") Cc: stable@vger.kernel.org Signed-off-by: Kim Phillips <kim.phillips@amd.com> Reviewed-by: Liam Merwick <liam.merwick@oracle.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: John Allen <john.allen@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit eef0532 ] Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur: ''' test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/1 bpf_tcp_ca/dctcp:FAIL test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524 torvalds#29/2 bpf_tcp_ca/cubic:FAIL test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524 torvalds#29/4 bpf_tcp_ca/dctcp_fallback:FAIL test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524 torvalds#29/6 bpf_tcp_ca/write_sk_pacing:FAIL test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524 settcpca:FAIL:setsockopt unexpected setsockopt: \ actual -1 == expected -1 (network_helpers.c:99: errno: No such file or directory) \ Failed to call post_socket_cb start_test:FAIL:start_server_str unexpected start_server_str: \ actual -1 == expected -1 test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \ actual 0 <= expected 0 torvalds#29/9 bpf_tcp_ca/update_ca:FAIL torvalds#29 bpf_tcp_ca:FAIL Caught signal torvalds#11! Stack trace: ./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault ''' This is because BPF trampoline is not implemented on Loongarch yet, "link" returned by bpf_map__attach_struct_ops() is NULL. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "out" to destroy the skel. v2: - use "goto out" instead of "return" as Eduard suggested. Fixes: 06da9f3 ("selftests/bpf: Test switching TCP Congestion Control algorithms.") Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/r/b4c841492bd4ed97964e4e61e92827ce51bf1dc9.1720615848.git.tanggeliang@kylinos.cn Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 36ac9e7 ] Reinitialize the whole EST structure would also reset the mutex lock which is embedded in the EST structure, and then trigger the following warning. To address this, move the lock to struct stmmac_priv. We also need to reacquire the mutex lock when doing this initialization. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 505 at kernel/locking/mutex.c:587 __mutex_lock+0xd84/0x1068 Modules linked in: CPU: 3 PID: 505 Comm: tc Not tainted 6.9.0-rc6-00053-g0106679839f7-dirty torvalds#29 Hardware name: NXP i.MX8MPlus EVK board (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __mutex_lock+0xd84/0x1068 lr : __mutex_lock+0xd84/0x1068 sp : ffffffc0864e3570 x29: ffffffc0864e3570 x28: ffffffc0817bdc78 x27: 0000000000000003 x26: ffffff80c54f1808 x25: ffffff80c9164080 x24: ffffffc080d723ac x23: 0000000000000000 x22: 0000000000000002 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffc083bc3000 x18: ffffffffffffffff x17: ffffffc08117b080 x16: 0000000000000002 x15: ffffff80d2d40000 x14: 00000000000002da x13: ffffff80d2d404b8 x12: ffffffc082b5a5c8 x11: ffffffc082bca680 x10: ffffffc082bb2640 x9 : ffffffc082bb2698 x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000000001 x5 : ffffff8178fe0d48 x4 : 0000000000000000 x3 : 0000000000000027 x2 : ffffff8178fe0d50 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: __mutex_lock+0xd84/0x1068 mutex_lock_nested+0x28/0x34 tc_setup_taprio+0x118/0x68c stmmac_setup_tc+0x50/0xf0 taprio_change+0x868/0xc9c Fixes: b2aae65 ("net: stmmac: add mutex lock to protect est parameters") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Link: https://lore.kernel.org/r/20240513014346.1718740-2-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> (cherry picked from commit 36ac9e7) [Harshit: CVE-2024-38594; resolved conflicts due to missing commit: 5ca63ff ("net: stmmac: Report taprio offload status") in 6.6.y] Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If there is an error during some initialization realated to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath12k_pci), and we get: [ 41.271233] WARNING: CPU: 0 PID: 2098 at mm/slub.c:4689 free_large_kmalloc+0x4d/0x80 [ 41.271246] Modules linked in: uinput snd_seq_dummy snd_hrtimer nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables nfnetlink sunrpc qrtr_mhi intel_rapl_msr intel_rapl_common intel_uncore_frequency_common intel_pmc_core intel_vsec pmt_telemetry pmt_class kvm_intel kvm rapl qrtr snd_hda_codec_generic ath12k qmi_helpers snd_hda_intel snd_intel_dspcfg snd_intel_sdw_acpi iTCO_wdt intel_pmc_bxt mac80211 snd_hda_codec iTCO_vendor_support libarc4 snd_hda_core snd_hwdep snd_seq snd_seq_device cfg80211 snd_pcm pcspkr i2c_i801 snd_timer i2c_smbus snd rfkill soundcore lpc_ich mhi virtio_balloon joydev xfs crct10dif_pclmul crc32_pclmul crc32c_intel polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 sha256_ssse3 sha1_ssse3 virtio_net virtio_blk virtio_console virtio_gpu net_failover failover virtio_dma_buf serio_raw fuse qemu_fw_cfg [ 41.271284] CPU: 0 UID: 0 PID: 2098 Comm: bash Kdump: loaded Not tainted 6.12.0-rc1+ torvalds#29 [ 41.271286] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 [ 41.271287] RIP: 0010:free_large_kmalloc+0x4d/0x80 [ 41.271289] Code: 00 10 00 00 48 d3 e0 f7 d8 81 e2 c0 00 00 00 75 2f 89 c6 48 89 df e8 82 ff ff ff f0 ff 4b 34 0f 85 59 0e ce 00 e9 5b 0e ce 00 <0f> 0b 80 3d c8 29 3c 02 00 0f 84 2d 0e ce 00 b8 00 f0 ff ff eb d1 [ 41.271290] RSP: 0018:ffffa40881a33c50 EFLAGS: 00010246 [ 41.271292] RAX: 000fffffc0000000 RBX: ffffe697c0278000 RCX: 0000000000000000 [ 41.271293] RDX: ffffe697c0b60008 RSI: ffff8d00c9e00000 RDI: ffffe697c0278000 [ 41.271294] RBP: ffff8d00c3af0000 R08: ffff8d00f215d0c0 R09: 0000000080400038 [ 41.271294] R10: 0000000080400038 R11: 0000000000000000 R12: 0000000000000001 [ 41.271295] R13: ffffffffc0ef8948 R14: ffffffffc0ef8948 R15: ffff8d00c1277560 [ 41.271296] FS: 00007fd31e556740(0000) GS:ffff8d011e400000(0000) knlGS:0000000000000000 [ 41.271297] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.271298] CR2: 00007f778d3ffb38 CR3: 00000000065dc000 CR4: 0000000000752ef0 [ 41.271301] PKRU: 55555554 [ 41.271302] Call Trace: [ 41.271304] <TASK> [ 41.271304] ? free_large_kmalloc+0x4d/0x80 [ 41.271306] ? __warn.cold+0x93/0xfa [ 41.271308] ? free_large_kmalloc+0x4d/0x80 [ 41.271311] ? report_bug+0xff/0x140 [ 41.271314] ? handle_bug+0x58/0x90 [ 41.271316] ? exc_invalid_op+0x17/0x70 [ 41.271317] ? asm_exc_invalid_op+0x1a/0x20 [ 41.271321] ? free_large_kmalloc+0x4d/0x80 [ 41.271323] ath12k_dp_free+0xdc/0x110 [ath12k] [ 41.271337] ath12k_core_deinit+0x8d/0xb0 [ath12k] [ 41.271345] ath12k_pci_remove+0x50/0xf0 [ath12k] [ 41.271354] pci_device_remove+0x3f/0xb0 [ 41.271356] device_release_driver_internal+0x19c/0x200 [ 41.271359] unbind_store+0xa1/0xb0 ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just check if the buffers were already released and if they need to be released, in addition set to NULL for the checking. cc: stable@vger.kernel.org Fixes: d889913 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>

Cherry picked from Raspberry Pi kernel source. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Nick Bulleid <nedbulleid@fastmail.com>

there is a global spinlock between reset and clk, if locked in reset, then print some debug information, maybe dead-lock when uart driver try to disable clk. Backtrace stopped: frame did not save the PC (gdb) thread 4 [Switching to thread 4 (Thread 4)] #0 cpu_relax () at ./arch/riscv/include/asm/vdso/processor.h:22 22 ./arch/riscv/include/asm/vdso/processor.h: No such file or directory. (gdb) bt #0 cpu_relax () at ./arch/riscv/include/asm/vdso/processor.h:22 #1 arch_spin_lock (lock=lock@entry=0xffffffff81a57cd0 <enable_lock>) at ./include/asm-generic/spinlock.h:49 #2 do_raw_spin_lock (lock=lock@entry=0xffffffff81a57cd0 <enable_lock>) at ./include/linux/spinlock.h:186 #3 0xffffffff80aa21ce in __raw_spin_lock_irqsave (lock=0xffffffff81a57cd0 <enable_lock>) at ./include/linux/spinlock_api_smp.h:111 #4 _raw_spin_lock_irqsave (lock=lock@entry=0xffffffff81a57cd0 <enable_lock>) at kernel/locking/spinlock.c:162 #5 0xffffffff80563416 in clk_enable_lock () at ./include/linux/spinlock.h:325 torvalds#6 0xffffffff805648de in clk_core_disable_lock (core=0xffffffd900512500) at drivers/clk/clk.c:1062 torvalds#7 0xffffffff8056527e in clk_disable (clk=<optimized out>) at drivers/clk/clk.c:1084 torvalds#8 clk_disable (clk=0xffffffd9048b5100) at drivers/clk/clk.c:1079 torvalds#9 0xffffffff8059e5d4 in serial_pxa_console_write (co=<optimized out>, s=0xffffffff81a68250 <text> "[ 14.708612] [RESET][spacemit_reset_set][373]:assert = 1, id = 59 \n", count=<optimized out>) at drivers/tty/serial/pxa_k1x.c:1724 torvalds#10 0xffffffff8004a34c in call_console_driver (dropped_text=0xffffffff81a68650 <dropped_text> "", len=69, text=0xffffffff81a68250 <text> "[ 14.708612] [RESET][spacemit_reset_set][373]:assert = 1, id = 59 \n", con=0xffffffff81964c10 <serial_pxa_console>) at kernel/printk/printk.c:1942 torvalds#11 console_emit_next_record (con=con@entry=0xffffffff81964c10 <serial_pxa_console>, ext_text=<optimized out>, dropped_text=0xffffffff81a68650 <dropped_text> "", handover=0xffffffc80578baa7, text=0xffffffff81a68250 <text> "[ 14.708612] [RESET][spacemit_reset_set][373]:assert = 1, id = 59 \n") at kernel/printk/printk.c:2731 torvalds#12 0xffffffff8004a49a in console_flush_all (handover=0xffffffc80578baa7, next_seq=<synthetic pointer>, do_cond_resched=false) at kernel/printk/printk.c:2793 torvalds#13 console_unlock () at kernel/printk/printk.c:2860 torvalds#14 0xffffffff8004b388 in vprintk_emit (facility=facility@entry=0, level=<optimized out>, level@entry=-1, dev_info=dev_info@entry=0x0, fmt=<optimized out>, args=<optimized out>) at kernel/printk/printk.c:2268 torvalds#15 0xffffffff8004b3ae in vprintk_default (fmt=<optimized out>, args=<optimized out>) at kernel/printk/printk.c:2279 torvalds#16 0xffffffff8004b646 in vprintk (fmt=fmt@entry=0xffffffff813be470 "\001\066[RESET][%s][%d]:assert = %d, id = %d \n", args=args@entry=0xffffffc80578bbd8) at kernel/printk/printk_safe.c:50 torvalds#17 0xffffffff80a880d6 in _printk (fmt=fmt@entry=0xffffffff813be470 "\001\066[RESET][%s][%d]:assert = %d, id = %d \n") at kernel/printk/printk.c:2289 torvalds#18 0xffffffff80a90bb6 in spacemit_reset_set (rcdev=rcdev@entry=0xffffffff81f563a8 <k1x_reset_controller+8>, id=id@entry=59, assert=assert@entry=true) at drivers/reset/reset-spacemit-k1x.c:373 torvalds#19 0xffffffff805823b6 in spacemit_reset_update (assert=true, id=59, rcdev=0xffffffff81f563a8 <k1x_reset_controller+8>) at drivers/reset/reset-spacemit-k1x.c:401 torvalds#20 spacemit_reset_update (assert=true, id=59, rcdev=0xffffffff81f563a8 <k1x_reset_controller+8>) at drivers/reset/reset-spacemit-k1x.c:387 torvalds#21 spacemit_reset_assert (rcdev=0xffffffff81f563a8 <k1x_reset_controller+8>, id=59) at drivers/reset/reset-spacemit-k1x.c:413 torvalds#22 0xffffffff8058158e in reset_control_assert (rstc=0xffffffd902b2f280) at drivers/reset/core.c:485 torvalds#23 0xffffffff807ccf96 in cpp_disable_clocks (cpp_dev=cpp_dev@entry=0xffffffd904cc9040) at drivers/media/platform/spacemit/camera/cam_cpp/k1x_cpp.c:960 torvalds#24 0xffffffff807cd0b2 in cpp_release_hardware (cpp_dev=cpp_dev@entry=0xffffffd904cc9040) at drivers/media/platform/spacemit/camera/cam_cpp/k1x_cpp.c:1038 torvalds#25 0xffffffff807cd990 in cpp_close_node (sd=<optimized out>, fh=<optimized out>) at drivers/media/platform/spacemit/camera/cam_cpp/k1x_cpp.c:1135 torvalds#26 0xffffffff8079525e in subdev_close (file=0xffffffd906645d00) at drivers/media/v4l2-core/v4l2-subdev.c:105 torvalds#27 0xffffffff8078e49e in v4l2_release (inode=<optimized out>, filp=0xffffffd906645d00) at drivers/media/v4l2-core/v4l2-dev.c:459 torvalds#28 0xffffffff80154974 in __fput (file=0xffffffd906645d00) at fs/file_table.c:320 torvalds#29 0xffffffff80154aa2 in ____fput (work=<optimized out>) at fs/file_table.c:348 torvalds#30 0xffffffff8002677e in task_work_run () at kernel/task_work.c:179 torvalds#31 0xffffffff800053b4 in resume_user_mode_work (regs=0xffffffc80578bee0) at ./include/linux/resume_user_mode.h:49 torvalds#32 do_work_pending (regs=0xffffffc80578bee0, thread_info_flags=<optimized out>) at arch/riscv/kernel/signal.c:478 torvalds#33 0xffffffff800039c6 in handle_exception () at arch/riscv/kernel/entry.S:374 Backtrace stopped: frame did not save the PC (gdb) thread 1 [Switching to thread 1 (Thread 1)] #0 0xffffffff80047e9c in arch_spin_lock (lock=lock@entry=0xffffffff81a57cd8 <g_cru_lock>) at ./include/asm-generic/spinlock.h:49 49 ./include/asm-generic/spinlock.h: No such file or directory. (gdb) bt #0 0xffffffff80047e9c in arch_spin_lock (lock=lock@entry=0xffffffff81a57cd8 <g_cru_lock>) at ./include/asm-generic/spinlock.h:49 #1 do_raw_spin_lock (lock=lock@entry=0xffffffff81a57cd8 <g_cru_lock>) at ./include/linux/spinlock.h:186 #2 0xffffffff80aa21ce in __raw_spin_lock_irqsave (lock=0xffffffff81a57cd8 <g_cru_lock>) at ./include/linux/spinlock_api_smp.h:111 #3 _raw_spin_lock_irqsave (lock=0xffffffff81a57cd8 <g_cru_lock>) at kernel/locking/spinlock.c:162 #4 0xffffffff8056c4cc in ccu_mix_disable (hw=0xffffffff81956858 <sdh2_clk+120>) at ./include/linux/spinlock.h:325 #5 0xffffffff80564832 in clk_core_disable (core=0xffffffd900529900) at drivers/clk/clk.c:1051 torvalds#6 clk_core_disable (core=0xffffffd900529900) at drivers/clk/clk.c:1031 torvalds#7 0xffffffff805648e6 in clk_core_disable_lock (core=0xffffffd900529900) at drivers/clk/clk.c:1063 torvalds#8 0xffffffff8056527e in clk_disable (clk=<optimized out>) at drivers/clk/clk.c:1084 torvalds#9 clk_disable (clk=clk@entry=0xffffffd904fafa80) at drivers/clk/clk.c:1079 torvalds#10 0xffffffff808bb898 in clk_disable_unprepare (clk=0xffffffd904fafa80) at ./include/linux/clk.h:1085 torvalds#11 0xffffffff808bb916 in spacemit_sdhci_runtime_suspend (dev=<optimized out>) at drivers/mmc/host/sdhci-of-k1x.c:1469 torvalds#12 0xffffffff8066e8e2 in pm_generic_runtime_suspend (dev=<optimized out>) at drivers/base/power/generic_ops.c:25 torvalds#13 0xffffffff80670398 in __rpm_callback (cb=cb@entry=0xffffffff8066e8ca <pm_generic_runtime_suspend>, dev=dev@entry=0xffffffd9018a2810) at drivers/base/power/runtime.c:395 torvalds#14 0xffffffff806704b8 in rpm_callback (cb=cb@entry=0xffffffff8066e8ca <pm_generic_runtime_suspend>, dev=dev@entry=0xffffffd9018a2810) at drivers/base/power/runtime.c:529 torvalds#15 0xffffffff80670bdc in rpm_suspend (dev=0xffffffd9018a2810, rpmflags=<optimized out>) at drivers/base/power/runtime.c:672 torvalds#16 0xffffffff806716de in pm_runtime_work (work=0xffffffd9018a2948) at drivers/base/power/runtime.c:974 torvalds#17 0xffffffff800236f4 in process_one_work (worker=worker@entry=0xffffffd9013ee9c0, work=0xffffffd9018a2948) at kernel/workqueue.c:2289 torvalds#18 0xffffffff80023ba6 in worker_thread (__worker=0xffffffd9013ee9c0) at kernel/workqueue.c:2436 torvalds#19 0xffffffff80028bb2 in kthread (_create=0xffffffd9017de840) at kernel/kthread.c:376 torvalds#20 0xffffffff80003934 in handle_exception () at arch/riscv/kernel/entry.S:249 Backtrace stopped: frame did not save the PC (gdb) Change-Id: Ia95b41ffd6c1893c9c5e9c1c9fc0c155ea902d2c

ideapad: fix the delay when controlling brightness

88d862e

abdelli closed this Mar 5, 2013

abdelli deleted the patch-1 branch March 5, 2013 14:33

steev pushed a commit to steev/linux that referenced this pull request Nov 26, 2024

Add support for gpio-poweroff (torvalds#29)

e80c9d3

Cherry picked from Raspberry Pi kernel source. Signed-off-by: Phil Elwell <phil@raspberrypi.com> Signed-off-by: Nick Bulleid <nedbulleid@fastmail.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ideapad: fix the delay when controlling brightness #29

ideapad: fix the delay when controlling brightness #29

abdelli commented Mar 5, 2013

ideapad: fix the delay when controlling brightness #29

ideapad: fix the delay when controlling brightness #29

Conversation

abdelli commented Mar 5, 2013