Update ratelimit.c #89
Closed
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
fix bug in ratelimit
gregnietsky
pushed a commit
to Distrotech/linux
that referenced
this pull request
Apr 9, 2014
commit 885d71e upstream. The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 torvalds#89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Signed-off-by: Huang Shijie <b32955@freescale.com> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xnox
pushed a commit
to xnox/linux
that referenced
this pull request
Apr 13, 2014
Turn it into (for example): [ 0.073380] x86: Booting SMP configuration: [ 0.074005] .... node #0, CPUs: #1 #2 #3 #4 #5 torvalds#6 torvalds#7 [ 0.603005] .... node #1, CPUs: torvalds#8 torvalds#9 torvalds#10 torvalds#11 torvalds#12 torvalds#13 torvalds#14 torvalds#15 [ 1.200005] .... node #2, CPUs: torvalds#16 torvalds#17 torvalds#18 torvalds#19 torvalds#20 torvalds#21 torvalds#22 torvalds#23 [ 1.796005] .... node #3, CPUs: torvalds#24 torvalds#25 torvalds#26 torvalds#27 torvalds#28 torvalds#29 torvalds#30 torvalds#31 [ 2.393005] .... node #4, CPUs: torvalds#32 torvalds#33 torvalds#34 torvalds#35 torvalds#36 torvalds#37 torvalds#38 torvalds#39 [ 2.996005] .... node #5, CPUs: torvalds#40 torvalds#41 torvalds#42 torvalds#43 torvalds#44 torvalds#45 torvalds#46 torvalds#47 [ 3.600005] .... node torvalds#6, CPUs: torvalds#48 torvalds#49 torvalds#50 torvalds#51 #52 #53 torvalds#54 torvalds#55 [ 4.202005] .... node torvalds#7, CPUs: torvalds#56 torvalds#57 #58 torvalds#59 torvalds#60 torvalds#61 torvalds#62 torvalds#63 [ 4.811005] .... node torvalds#8, CPUs: torvalds#64 torvalds#65 torvalds#66 torvalds#67 torvalds#68 torvalds#69 #70 torvalds#71 [ 5.421006] .... node torvalds#9, CPUs: torvalds#72 torvalds#73 torvalds#74 torvalds#75 torvalds#76 torvalds#77 torvalds#78 torvalds#79 [ 6.032005] .... node torvalds#10, CPUs: torvalds#80 torvalds#81 torvalds#82 torvalds#83 torvalds#84 torvalds#85 torvalds#86 torvalds#87 [ 6.648006] .... node torvalds#11, CPUs: torvalds#88 torvalds#89 torvalds#90 torvalds#91 torvalds#92 torvalds#93 torvalds#94 torvalds#95 [ 7.262005] .... node torvalds#12, CPUs: torvalds#96 torvalds#97 torvalds#98 torvalds#99 torvalds#100 torvalds#101 torvalds#102 torvalds#103 [ 7.865005] .... node torvalds#13, CPUs: torvalds#104 torvalds#105 torvalds#106 torvalds#107 torvalds#108 torvalds#109 torvalds#110 torvalds#111 [ 8.466005] .... node torvalds#14, CPUs: torvalds#112 torvalds#113 torvalds#114 torvalds#115 torvalds#116 torvalds#117 torvalds#118 torvalds#119 [ 9.073006] .... node torvalds#15, CPUs: torvalds#120 torvalds#121 torvalds#122 torvalds#123 torvalds#124 torvalds#125 torvalds#126 torvalds#127 [ 9.679901] x86: Booted up 16 nodes, 128 CPUs and drop useless elements. Change num_digits() to hpa's division-avoiding, cell-phone-typed version which he went at great lengths and pains to submit on a Saturday evening. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: huawei.libin@huawei.com Cc: wangyijing@huawei.com Cc: fenghua.yu@intel.com Cc: guohanjun@huawei.com Cc: paul.gortmaker@windriver.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
xnox
pushed a commit
to xnox/linux
that referenced
this pull request
Apr 13, 2014
The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 torvalds#89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Huang Shijie <b32955@freescale.com> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
发自我的小米手机 renweihub notifications@github.com编写：
|
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Apr 18, 2014
from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Apr 18, 2014
from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Apr 18, 2014
from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
swarren
pushed a commit
to swarren/linux-tegra
that referenced
this pull request
Apr 18, 2014
…released from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpfe_release+0x60/0x230) [<c025a65c>] (vpfe_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpfe_release+0x60/0x230) [<c025a65c>] (vpfe_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
ddstreet
referenced
this pull request
in ddstreet/linux
Apr 26, 2014
GIT 6866c5adedf260d36bff0df3645cacccbc6ff218
commit a614328ed1ce12a949f1c750666687346638170e
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Wed Apr 23 16:45:12 2014 +0200
gpio: do not set up hardware for IRQ_TYPE_NONE
Some GPIO irqchip drivers exploit the irqdomain mapping
function to set up the IRQ default type in the hardware,
make sure that if we pass IRQ_TYPE_NONE, no hardware setup
whatsoever takes place (this should be the norm) until
later when the IRQ gets utilized.
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: linux-omap <linux-omap@vger.kernel.org>
Tested-by: Javier Martinez Canillas <javier@dowhile0.org>
Tested-by: Nishanth Menon <nm@ti.com>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit a076e2ed3fd26f8877a3a010e3fae6b5306ba1b0
Author: Heiko Stübner <heiko@sntech.de>
Date: Wed Apr 23 14:28:59 2014 +0200
pinctrl: rockchip: implement PIN_CONFIG_OUTPUT handling
In some cases it is nice to be able to simply control a gpio output
via the PIN_CONFIG_OUTPUT option without having a driver control it.
Thus add support for it to the rockchip pinctrl driver.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit dab3eba7c13cff58dbff767dd02ffb847255ddd3
Author: Heiko Stübner <heiko@sntech.de>
Date: Wed Apr 23 14:27:51 2014 +0200
pinctrl: rockchip: return a complete config in pinconf_get
Till now pinconf_get only set the argument value into the config parameter
effectively removing the actual config param value. As other pinctrl drivers
do, it might be nicer to keep the config param intact.
Therefore construct a real pinconfig value from param and arg in pinconf_get
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit cff2fce58b2b0f59089e7edcdc38803d65057b9f
Author: Jeff Layton <jlayton@redhat.com>
Date: Tue Apr 22 08:24:32 2014 -0400
locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" instead
File-private locks have been re-christened as "open file description"
locks. Finish the symbol name cleanup in the internal implementation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
commit 7420d2d09b1279996e06efa6792f9f13c1863b1e
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Tue Apr 15 14:43:47 2014 +0800
pinctrl: sirf: switch driver to use gpiolib irqchip helpers
This switches the SiRF pinctrl driver over to using the gpiolib
irqchip helpers simplifying some of the code.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit c5eb757ca87d0fffcface683b8efda193cf3d4d4
Author: Barry Song <Baohua.Song@csr.com>
Date: Tue Apr 15 14:43:46 2014 +0800
pinctrl: sirf: wrap all gpio banks into one gpio_chip
all gpio banks are in one chip, that makes software clean in mapping
irq and gpio.
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit aef95b691feb44cd98010085295e23f209571b3b
Author: Linus Walleij <linus.walleij@linaro.org>
Date: Tue Apr 8 10:59:29 2014 +0200
pinctrl: sirf: rename inlined accessor
The sirfsoc_irqchip_to_bank() is obviously misnamed, as it is
not converting an irqchip to a bank but converts a gpiochip
to a bank so rename it sirfsoc_gpiochip_to_bank().
Acked-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 2aa5a68c53b0ca4184b06123f96d54d96b12f873
Author: Antoine Ténart <antoine.tenart@free-electrons.com>
Date: Tue Apr 22 10:27:28 2014 +0200
ARM: dts: berlin: enable SD card reader and eMMC for the BG2Q DMP
Enable the SD Card reader and the internal eMMC on the Berlin BG2Q DMP
using two of the SDHCI nodes of the Berlin BG2Q.
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
commit 2816b554a3610ef0e49cb8778844277e84c47eaf
Author: Antoine Ténart <antoine.tenart@free-electrons.com>
Date: Tue Apr 22 10:27:27 2014 +0200
ARM: dts: berlin: add the SDHCI nodes for the BG2Q
Add the SDHCI nodes for the Marvell Berlin BG2Q, using the mrvl,pxav3-mmc
driver.
Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
commit 34d791fd8a19edbfb822e9f05852042fba057c37
Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Fri Mar 21 21:08:41 2014 +0100
ARM: berlin: add cpupll and syspll support to BG2
The Berlin BG2 has two supported PLLs: CPU PLL and System PLL, add those to the
SoC device tree.
This also moves the remaining clocks from the clocks container node to the root.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
commit 25257827357663f267a4260acabf6da558c535a7
Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Fri Mar 21 21:08:40 2014 +0100
ARM: berlin: add cpupll and syspll support to BG2CD
The Berlin BG2CD has two supported PLLs: CPU PLL and System PLL, add those to
the SoC device tree.
This also moves the remaining clocks from the clocks container node to the root.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
commit c937aa1b0b4e40c1247f7020e5095756a7bcd4f6
Author: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Date: Fri Mar 21 21:08:39 2014 +0100
ARM: berlin: add cpupll and syspll support to BG2Q
The Berlin BG2Q has two supported PLLs: CPU PLL and System PLL, add those to the
SoC device tree.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
commit 35d0c383e526031145db7643618d9a529454a32f
Author: Eric Paris <eparis@redhat.com>
Date: Tue Apr 22 12:39:51 2014 -0400
sparc: implement is_32bit_task
We are currently embedding the same check from thread_info.h into
syscall.h thanks to the way syscall_get_arch() was implemented in the
audit tree. Instead create a new function, is_32bit_task() which is
similar to that found on the powerpc arch. This simplifies the
syscall.h code and makes the build/Kconfig requirements much easier
to understand.
Signed-off-by: Eric Paris <eparis@redhat.com
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: sparclinux@vger.kernel.org
commit 83d5b7ef99c9f05e87333b334a638de1264ab8e4
Author: Alexei Starovoitov <ast@plumgrid.com>
Date: Tue Apr 22 20:18:57 2014 -0700
net: filter: initialize A and X registers
exisiting BPF verifier allows uninitialized access to registers,
'ret A' is considered to be a valid filter.
So initialize A and X to zero to prevent leaking kernel memory
In the future BPF verifier will be rejecting such filters
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 2ebb15820ef72b45846c1f5fcc5462f63aefe0b8
Author: Shruti Kanetkar <Shruti@Freescale.com>
Date: Tue Apr 22 14:21:47 2014 -0500
net/phy: Remove return value for void function
This was caught when using a spatch (aka. coccinelle) script
written by Joe Perches.
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Shruti Kanetkar <Shruti@Freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 2d283862dc62daead9db0dc89cd0d0351e91f765
Author: Alexey Charkov <alchark@gmail.com>
Date: Tue Apr 22 19:28:09 2014 +0400
net: via-rhine: add OF bus binding
This should make the driver usable with VIA/WonderMedia ARM-based
Systems-on-Chip integrated Rhine III adapters. Note that these
are always in MMIO mode, and don't have any known EEPROM.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f7630d189c6ade2c83e20fa37169114def4271e8
Author: Alexey Charkov <alchark@gmail.com>
Date: Tue Apr 22 19:28:08 2014 +0400
net: via-rhine: reduce usage of the PCI-specific struct
Use more generic data structures instead of struct pci_dev wherever
possible in preparation for OF bus binding
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 4087c4dc120e150e4c7103a53bd5ee978b8db7c7
Author: Alexey Charkov <alchark@gmail.com>
Date: Tue Apr 22 19:28:07 2014 +0400
net: via-rhine: switch to generic DMA functions
Remove legacy PCI DMA wrappers and instead use generic DMA functions
directly in preparation for OF bus binding
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit c06cbcb6052edd8f4ee00d65f874b26404ac8f96
Author: Ben Hutchings <ben@decadent.org.uk>
Date: Tue Apr 22 17:29:42 2014 +0100
net: Update my email address
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 9e4b93f905bc0ca1363a07b0f039455d9117d6bc
Author: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Tue Apr 22 15:01:30 2014 +0200
vxlan: ensure to advertise the right fdb remote
The goal of this patch is to fix rtnelink notification. The main problem was
about notification for fdb entry with more than one remote. Before the patch,
when a remote was added to an existing fdb entry, the kernel advertised the
first remote instead of the added one. Also when a remote was removed from a fdb
entry with several remotes, the deleted remote was not advertised.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 6a1197457f9ec085871d2f842e1bbbe9d13216da
Author: Hubert Chaumette <hchaumette@adeneo-embedded.com>
Date: Tue Apr 22 15:01:04 2014 +0200
net/phy: micrel: fix bugged test on device tree loading for ksz9021
In ksz9021_load_values_from_of() val2 to val4 aren't tested against their
initialization value.
This causes the test to always succeed, and this value to be used as if it
was loaded from the devicetree instead of being ignored, in case of a
missing/invalid property in the ethernet OF device node.
As a result, the value "0" is written to the relevant registers.
Change the conditions to test against the right initialization value.
Signed-off-by: Hubert Chaumette <hchaumette@adeneo-embedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e676f197a7a9aae9c75b0d9acc97e07de07dd1f0
Author: Herbert Xu <herbert@gondor.apana.org.au>
Date: Tue Apr 22 17:15:34 2014 +0800
macvlan: Fix leak and NULL dereference on error path
The recent patch that moved broadcasts to process context added
a couple of bugs on the error path where we may dereference NULL
or leak an skb. This patch fixes them.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 22f08069e8b415b827e910ad75ed55eeadc4a877
Author: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Tue Apr 22 10:15:24 2014 +0200
ip6gre: add x-netns support
This patch allows to switch the netns when packet is encapsulated or
decapsulated. In other word, the encapsulated packet is received in a netns,
where the lookup is done to find the tunnel. Once the tunnel is found, the
packet is decapsulated and injecting into the corresponding interface which
stands to another netns.
When one of the two netns is removed, the tunnel is destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit b57708add31494175be741ed3fd24023b50c3423
Author: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Date: Tue Apr 22 10:15:23 2014 +0200
gre: add x-netns support
This patch allows to switch the netns when packet is encapsulated or
decapsulated. In other word, the encapsulated packet is received in a netns,
where the lookup is done to find the tunnel. Once the tunnel is found, the
packet is decapsulated and injecting into the corresponding interface which
stands to another netns.
When one of the two netns is removed, the tunnel is destroyed.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 893f66277799cd46bdf97429cc5d16a815a51273
Author: Haiyang Zhang <haiyangz@microsoft.com>
Date: Mon Apr 21 14:54:44 2014 -0700
hyperv: Simplify the send_completion variables
The union contains only one member now, so we use the variables in it directly.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 4baab26129e0540746744232022110dbe9e011e7
Author: Haiyang Zhang <haiyangz@microsoft.com>
Date: Mon Apr 21 14:54:43 2014 -0700
hyperv: Remove recv_pkt_list and lock
Removed recv_pkt_list and lock, and updated related code, so that
the locking overhead is reduced especially when multiple channels
are in use.
The recv_pkt_list isn't actually necessary because the packets are
processed sequentially in each channel. It has been replaced by a
local variable, and the related lock for this list is also removed.
The is_data_pkt field is not used in receive path, so its assignment
is cleaned up.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 021b5ea173843eaa5453ee9df00ebaedb45b77c6
Author: Sekhar Nori <nsekhar@ti.com>
Date: Tue Apr 22 13:58:03 2014 +0530
ARM: l2c: AM43x: add L2 cache support
Add support for L2 cache controller (PL310) on AM437x SoC.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
commit e0c60f5305230d5b9554bad2816cb85b6a9b6bdf
Author: Sekhar Nori <nsekhar@ti.com>
Date: Tue Apr 22 13:58:01 2014 +0530
ARM: l2c: omap2+: get rid of init call
Get rid of init call to initialize L2 cache. Instead use the init_early
machine hook. This helps in using the initialization routine across
SoCs without the need of ugly cpu_is_*() checks.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
commit cefe57b9b45af943967d9f40347ccd77415eae0f
Author: Sekhar Nori <nsekhar@ti.com>
Date: Tue Apr 22 13:58:02 2014 +0530
ARM: l2c: omap2+: get rid of redundant cache replacement policy setting
L2 cache initialization for OMAP4 redundantly sets the cache policy to
Round-Robin. This is not needed since thats the PL310 default anyway.
Removing this reduces the number of platform specific aux control
settings.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
commit 66a8049ebd395b6d28d3af42daaf54890812bdbf
Author: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Fri Apr 11 00:48:25 2014 +0100
ARM: l2c: always enable non-secure access to lockdown registers
Since we always write to these during the cache initialisation, it is
a good idea to always have the non-secure access bit set. Set it in
core code and remove it from OMAP4. Remove the NS access bit for the
interrupt registers from OMAP4 as well - nothing in the kernel accesses
that yet, and we can add it in core code when we have the need.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
commit 673b65614f0c866619e6760fa9d9f60eeb2d5d44
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 13:31:50 2014 -0400
kill generic_file_splice_write()
no callers left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit caffa86addd25a5830899988e05d4940e91cda7a
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 04:40:12 2014 -0400
ceph: switch to iter_file_splice_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit cb1528d30e4d780e5acff481720100c5b561f731
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 04:38:56 2014 -0400
shmem: switch to iter_file_splice_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit bd686639258b0a33ba9e5d0844bc0c0eedbb37f1
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 04:37:17 2014 -0400
nfs: switch to iter_splice_write_file()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 7c78da670de211667442c7f26687caf17589efa0
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 04:35:49 2014 -0400
fs/splice.c: remove unneeded exports
ocfs2 was using a bunch of splice.c guts...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 0ad4101e2e46b7785aebb85e05566b3475f881e4
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 04:34:23 2014 -0400
ocfs2: switch to iter_file_splice_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit d2f246523067c00f1cb272272a0187b355cb1d6e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Apr 5 04:27:08 2014 -0400
->splice_write() via ->write_iter()
iter_file_splice_write() - a ->splice_write() instance that gathers the
pipe buffers, builds a bio_vec-based iov_iter covering those and feeds
it to ->write_iter(). A bunch of simple cases coverted to that...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit f990bbc9bfa3cbd2df0d0050a15ef574d9ef6854
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri Apr 4 23:12:29 2014 -0400
bio_vec-backed iov_iter
New variant of iov_iter - ITER_BVEC in iter->type, backed with
bio_vec array instead of iovec one. Primitives taught to deal
with such beasts, __swap_write() switched to using that kind
of iov_iter.
Note that bio_vec is just a <page, offset, length> triple - there's
nothing block-specific about it. I've left the definition where it
was, but took it from under ifdef CONFIG_BLOCK.
Next target: ->splice_write()...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 364eeb4dc6fe2c0c47d955d95cd1fa87d16cf652
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri Apr 4 19:23:46 2014 -0400
optimize copy_page_{to,from}_iter()
if we'd ended up in the end of a segment, jump to the
beginning of the next one (iov_offset = 0, iov++),
rather than having the next primitive deal with that.
Ought to be folded back...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 4acc364a460a880df912e92f97caa2e9c7b78ffe
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri Apr 4 14:20:57 2014 -0400
bury generic_file_aio_{read,write}
no callers left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 66bf2adc2b7ae80dd4136e461d506e6349a24e1a
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri Apr 4 12:15:19 2014 -0400
lustre: get rid of messing with iovecs
* switch to ->read_iter/->write_iter
* keep a pointer to iov_iter instead of iov/nr_segs
* do not modify iovecs; use iov_iter_truncate()/iov_iter_advance() and
a new primitive - iov_iter_reexpand() (expand previously truncated
iterator) istead.
* (racy) check for lustre VMAs intersecting with iovecs kept for now as
for_each_iov() loop.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 0d995e67f8f95338d3a97782a69f2d2f42500583
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 23:09:01 2014 -0400
ceph: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit ab078bdf1728ce5febf92a4c8c9d044bb500825e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 22:58:25 2014 -0400
ceph_sync_direct_write: stop poking into iov_iter guts
all needed primitives are there...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit d834906ec8a833a5d0b76d65c717758b33b8bbdc
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 22:31:22 2014 -0400
ceph_sync_read: stop poking into iov_iter guts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 83f241c03065c7824d9fd964709d9c92bf85c13f
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 15:05:18 2014 -0400
new helper: copy_page_from_iter()
parallel to copy_page_to_iter(). pipe_write() switched to it (and became
->write_iter()).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 8edcd2d842c8ca8ac53b1175139fb6487f90dee3
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:33:23 2014 -0400
fuse: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit fd353d01663fac77652c1070b20db181d65d9a47
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:29:04 2014 -0400
btrfs: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit dd5e55236b1f8dfd21a1eb6bac66c2e161353c59
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:25:22 2014 -0400
ocfs2: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 24d099ed4d702db1f9c80658bbf7f4b65ad5c5a1
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:20:23 2014 -0400
xfs: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 64dcf804a0dad550502c3f5359609c33448705cf
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:13:46 2014 -0400
afs: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit c7b9747a05c43c533a72a1a4bf05efa2c077697b
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:11:01 2014 -0400
gfs2: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit eb0e6430cf51a95e1ed6d1c1f385a41dfca082a4
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:07:25 2014 -0400
nfs: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 25698dc3f1879379b505716b868d1086993c3da5
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 14:00:23 2014 -0400
ubifs: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 6e7a6c1953d284deebbdfdcce1dafac107e58a23
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 03:32:25 2014 -0400
bury __generic_file_aio_write()
all users converted to __generic_file_write_iter() now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 095b98db1ba7e2497f4373c465701f89aa1b8a56
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 12:05:17 2014 -0400
cifs: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit e054d7ca23dd3d3355ab45f825f52e1b26b20119
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 03:31:17 2014 -0400
udf: switch to ->write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit fa4d1a22617514a48adff682b775295112b95a65
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 17 16:09:22 2014 -0400
convert ext4 to ->write_iter()
unfortunately, Ted's changes to ext4_file_write() are *still* an
incomplete fix - playing with rlimits can let you smuggle an
unaligned request past the checks. So there almost certainly
will be more merge PITA around that place...
[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit f5f4a0fb44f828230245b9430dc1c2dcd2ba59f3
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 03:21:50 2014 -0400
blkdev_aio_write() - turn into blkdev_write_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit e6552301fb08c76b591c31b9314116a65b944039
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 3 03:17:43 2014 -0400
write_iter variants of {__,}generic_file_aio_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 039e531c56f1391205d01b6c5e83423be8106a69
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 20:28:01 2014 -0400
ceph: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 9e431f21f82e7794c411468b6fcfd3716758b6c5
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 20:14:12 2014 -0400
nfs: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 19d9e89a2de4aa9d32e6071831d14e84ed200860
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 20:02:21 2014 -0400
fs/block_dev.c: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 0173d71ed29a46b2198d922e5e6dd0a143ecec71
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 20:00:02 2014 -0400
shmem: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit f52ed8134326bfd40c71dd3b03a07f027ac2e2f5
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 19:56:54 2014 -0400
pipe: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 18530ac876393a487892af2eb682381d418519f1
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 19:53:36 2014 -0400
cifs: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit c6c7a409ad04c0e04093c45631d40da5399c890e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 14:47:09 2014 -0400
fuse_file_aio_read(): convert to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 9162e88348efef838d58b47a8ad6d529be47717f
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 14:44:18 2014 -0400
ocfs2: switch to ->read_iter()
tracepoints are evil, exhibit #6969...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit ac8a04a66b3ea8a7bdcc15709f48f7e3f61f1cfe
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 14:40:38 2014 -0400
ecryptfs: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit f8b5abb60a9cba14b179214aa05896a8e0fc816e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 14:37:59 2014 -0400
xfs: switch to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 8eb02141b8a6e2bc03588353f20729782948fafa
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 14:33:16 2014 -0400
switch simple generic_file_aio_read() users to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 4ba221d091f294a173a21f0c7268937a045982bd
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Feb 11 18:37:41 2014 -0500
new methods: ->read_iter() and ->write_iter()
Beginning to introduce those. Just the callers for now, and it's
clumsier than it'll eventually become; once we finish converting
aio_read and aio_write instances, the things will get nicer.
For now, these guys are in parallel to ->aio_read() and ->aio_write();
they take iocb and iov_iter, with everything in iov_iter already
validated. File offset is passed in iocb->ki_pos, iov/nr_segs -
in iov_iter.
Main concerns in that series are stack footprint and ability to
split the damn thing cleanly.
[fix from Peter Ujfalusi <peter.ujfalusi@ti.com> folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit fec1182acc775f19bd65effc7cf79303a000a6d8
Author: Poulain, Loic <loic.poulain@intel.com>
Date: Tue Apr 1 14:56:17 2014 +0000
Bluetooth: Remove hci_h4 unused defines
H4 states are not used anymore.
Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
commit 25eeb894cde01d19d67c6fb54b24803db3d599f2
Author: Mohammed Habibulla <moch@chromium.org>
Date: Thu Apr 17 11:37:13 2014 -0700
Bluetooth: Add support for Lite-on [04ca:3007]
Add support for the AR9462 chip
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=04ca ProdID=3007 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
commit f8f22e53a262ebee37fc98004f16b066cf5bc125
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:16 2014 -0400
cgroup: implement dynamic subtree controller enable/disable on the default hierarchy
cgroup is switching away from multiple hierarchies and will use one
unified default hierarchy where controllers can be dynamically enabled
and disabled per subtree. The default hierarchy will serve as the
unified hierarchy to which all controllers are attached and a css on
the default hierarchy would need to also serve the tasks of descendant
cgroups which don't have the controller enabled - ie. the tree may be
collapsed from leaf towards root when viewed from specific
controllers. This has been implemented through effective css in the
previous patches.
This patch finally implements dynamic subtree controller
enable/disable on the default hierarchy via a new knob -
"cgroup.subtree_control" which controls which controllers are enabled
on the child cgroups. Let's assume a hierarchy like the following.
root - A - B - C
\ D
root's "cgroup.subtree_control" determines which controllers are
enabled on A. A's on B. B's on C and D. This coincides with the
fact that controllers on the immediate sub-level are used to
distribute the resources of the parent. In fact, it's natural to
assume that resource control knobs of a child belong to its parent.
Enabling a controller in "cgroup.subtree_control" declares that
distribution of the respective resources of the cgroup will be
controlled. Note that this means that controller enable states are
shared among siblings.
The default hierarchy has an extra restriction - only cgroups which
don't contain any task may have controllers enabled in
"cgroup.subtree_control". Combined with the other properties of the
default hierarchy, this guarantees that, from the view point of
controllers, tasks are only on the leaf cgroups. In other words, only
leaf csses may contain tasks. This rules out situations where child
cgroups compete against internal tasks of the parent, which is a
competition between two different types of entities without any clear
way to determine resource distribution between the two. Different
controllers handle it differently and all the implemented behaviors
are ambiguous, ad-hoc, cumbersome and/or just wrong. Having this
structural constraints imposed from cgroup core removes the burden
from controller implementations and enables showing one consistent
behavior across all controllers.
When a controller is enabled or disabled, css associations for the
controller in the subtrees of each child should be updated. After
enabling, the whole subtree of a child should point to the new css of
the child. After disabling, the whole subtree of a child should point
to the cgroup's css. This is implemented by first updating cgroup
states such that cgroup_e_css() result points to the appropriate css
and then invoking cgroup_update_dfl_csses() which migrates all tasks
in the affected subtrees to the self cgroup on the default hierarchy.
* When read, "cgroup.subtree_control" lists all the currently enabled
controllers on the children of the cgroup.
* White-space separated list of controller names prefixed with either
'+' or '-' can be written to "cgroup.subtree_control". The ones
prefixed with '+' are enabled on the controller and '-' disabled.
* A controller can be enabled iff the parent's
"cgroup.subtree_control" enables it and disabled iff no child's
"cgroup.subtree_control" has it enabled.
* If a cgroup has tasks, no controller can be enabled via
"cgroup.subtree_control". Likewise, if "cgroup.subtree_control" has
some controllers enabled, tasks can't be migrated into the cgroup.
* All controllers which aren't bound on other hierarchies are
automatically associated with the root cgroup of the default
hierarchy. All the controllers which are bound to the default
hierarchy are listed in the read-only file "cgroup.controllers" in
the root directory.
* "cgroup.controllers" in all non-root cgroups is read-only file whose
content is equal to that of "cgroup.subtree_control" of the parent.
This indicates which controllers can be used in the cgroup's
"cgroup.subtree_control".
This is still experimental and there are some holes, one of which is
that ->can_attach() failure during cgroup_update_dfl_csses() may leave
the cgroups in an undefined state. The issues will be addressed by
future patches.
v2: Non-root cgroups now also have "cgroup.controllers".
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit f817de98513d060023be4fa1d061b29a6515273e
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:16 2014 -0400
cgroup: prepare migration path for unified hierarchy
Unified hierarchy implementation would require re-migrating tasks onto
the same cgroup on the default hierarchy to reflect updated effective
csses. Update cgroup_migrate_prepare_dst() so that it accepts NULL as
the destination cgrp. When NULL is specified, the destination is
considered to be the cgroup on the default hierarchy associated with
each css_set.
After this change, the identity check in cgroup_migrate_add_src()
isn't sufficient for noop detection as the associated csses may change
without any cgroup association changing. The only way to tell whether
a migration is noop or not is testing whether the source and
destination csets are identical. The noop check in
cgroup_migrate_add_src() is removed and cset identity test is added to
cgroup_migreate_prepare_dst(). If it's detected that source and
destination csets are identical, the cset is removed removed from
@preloaded_csets and all the migration nodes are cleared which makes
cgroup_migrate() ignore the cset.
Also, make the function append the destination css_sets to
@preloaded_list so that destination css_sets always come after source
css_sets.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 7fd8c565d8a501486d63d7ee07fd6582e97db437
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:16 2014 -0400
cgroup: update subsystem rebind restrictions
Because the default root couldn't have any non-root csses attached to
it, rebinding away from it was always allowed; however, the default
hierarchy will soon host the unified hierarchy and have non-root csses
so the rebind restrictions need to be updated accordingly.
Instead of special casing rebinding from the default hierarchy and
then checking whether the source hierarchy has children cgroups, which
implies non-root csses for !dfl hierarchies, simply check whether the
source hierarchy has non-root csses for the subsystem using
css_next_child().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 6803c006282768ec850760766a6e4eb1a6ff87df
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:16 2014 -0400
cgroup: add css_set->dfl_cgrp
To implement the unified hierarchy behavior, we'll need to be able to
determine the associated cgroup on the default hierarchy from css_set.
Let's add css_set->dfl_cgrp so that it can be accessed conveniently
and efficiently.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit bd53d617b34c781dac8e22dbc75e8f182d918ecf
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:16 2014 -0400
cgroup: allow cgroup creation and suppress automatic css creation in the unified hierarchy
Now that effective css handling has been added and iterators updated
accordingly, it's safe to allow cgroup creation in the default
hierarchy. Unblock cgroup creation in the default hierarchy.
As the default hierarchy will implement explicit enabling and
disabling of controllers on each cgroup, suppress automatic css
enabling on cgroup creation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit e32978031016f56be977a9a856ba4d9f447db51f
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:15 2014 -0400
cgroup: cgroup->subsys[] should be cleared after the css is offlined
After a css finishes offlining, offline_css() mistakenly performs
RCU_INIT_POINTER(css->cgroup->subsys[ss->id], css) which just sets the
cgroup->subsys[] pointer to the current value. The intention was to
clear it after offline is complete, not reassign the same value.
Update it to assign NULL instead of the current value. This makes
cgroup_css() to return NULL once offline is complete. All the
existing users of the function either can handle NULL return already
or guarantee that the css doesn't get offlined.
While this is a bugfix, as css lifetime is currently tied to the
cgroup it belongs to, this bug doesn't cause any actual problems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 3ebb2b6ef38875b866ec0118bfae7bc52afd0166
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:15 2014 -0400
cgroup: teach css_task_iter about effective csses
Currently, css_task_iter iterates tasks associated with a css by
visiting each css_set associated with the owning cgroup and walking
tasks of each of them. This works fine for !unified hierarchies as
each cgroup has its own css for each associated subsystem on the
hierarchy; however, on the planned unified hierarchy, a cgroup may not
have csses associated and its tasks would be considered associated
with the matching css of the nearest ancestor which has the subsystem
enabled.
This means that on the default unified hierarchy, just walking all
tasks associated with a cgroup isn't enough to walk all tasks which
are associated with the specified css. If any of its children doesn't
have the matching css enabled, task iteration should also include all
tasks from the subtree. We already added cgroup->e_csets[] to list
all css_sets effectively associated with a given css and walk css_sets
on that list instead to achieve such iteration.
This patch updates css_task_iter iteration such that it walks css_sets
on cgroup->e_csets[] instead of cgroup->cset_links if iteration is
requested on an non-dummy css. Thanks to the previous iteration
update, this change can be achieved with the addition of
css_task_iter->ss and minimal updates to css_advance_task_iter() and
css_task_iter_start().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 0f0a2b4fa6210147131082999f1f16d7fb79abf8
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:15 2014 -0400
cgroup: reorganize css_task_iter
This patch reorganizes css_task_iter so that adding effective css
support is easier.
* s/->cset_link/->cset_pos/ and s/->task/->task_pos/ for consistency
* ->origin_css is used to determine whether the iteration reached the
last css_set. Replace it with explicit ->cset_head so that
css_advance_task_iter() doesn't have to know the termination
condition directly.
* css_task_iter_next() currently assumes that it's walking list of
cgrp_cset_link and reaches into the current cset through the current
link to determine the termination conditions for task walking. As
this won't always be true for effective css walking, add
->tasks_head and ->mg_tasks_head and use them to control task
walking so that css_task_iter_next() doesn't have to know how
css_sets are being walked.
This patch doesn't make any behavior changes. The iteration logic
stays unchanged after the patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 3b281afbc3a06cd69c54e6db1a04a8e73997723f
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:15 2014 -0400
cgroup: make css_next_child() skip missing csses
css_next_child() walks the children of the specified css. It does
this by finding the next cgroup and then returning the requested css.
On the default unified hierarchy, a cgroup may not have a css
associated with it even if the hierarchy has the subsystem enabled.
This patch updates css_next_child() so that it skips children without
the requested css associated.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 2d8f243a5e6efa57fb7c46fe83fafa45b33d0ec2
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:15 2014 -0400
cgroup: implement cgroup->e_csets[]
On the default unified hierarchy, a cgroup may be associated with
csses of its ancestors, which means that a css of a given cgroup may
be associated with css_sets of descendant cgroups. This means that we
can't walk all tasks associated with a css by iterating the css_sets
associated with the cgroup as there are css_sets which are pointing to
the css but linked on the descendants.
This patch adds per-subsystem list heads cgroup->e_csets[]. Any
css_set which is pointing to a css is linked to
css->cgroup->e_csets[$SUBSYS_ID] through
css_set->e_cset_node[$SUBSYS_ID]. The lists are protected by
css_set_rwsem and will allow us to walk all css_sets associated with a
given css so that we can find out all associated tasks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit aec3dfcb2e43892180ee053e8c260dcdeccf4392
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:14 2014 -0400
cgroup: introduce effective cgroup_subsys_state
In the planned default unified hierarchy, controllers may get
dynamically attached to and detached from a cgroup and a cgroup may
not have csses for all the controllers associated with the hierarchy.
When a cgroup doesn't have its own css for a given controller, the css
of the nearest ancestor with the controller enabled will be used,
which is called the effective css. This patch introduces
cgroup_e_css() and for_each_e_css() to access the effective csses and
convert compare_css_sets(), find_existing_css_set() and
cgroup_migrate() to use the effective csses so that they can handle
cgroups with partial csses correctly.
This means that for two css_sets to be considered identical, they
should have both matching csses and cgroups. compare_css_sets()
already compares both, not for correctness but for optimization. As
this now becomes a matter of correctness, update the comments
accordingly.
For all !default hierarchies, cgroup_e_css() always equals
cgroup_css(), so this patch doesn't change behavior.
While at it, fix incorrect locking comment for for_each_css().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit f392e51cd6ae6f6ee5b9b6d611cdc282b4c1711e
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:14 2014 -0400
cgroup: update cgroup->subsys_mask to ->child_subsys_mask and restore cgroup_root->subsys_mask
944196278d3d ("cgroup: move ->subsys_mask from cgroupfs_root to
cgroup") moved ->subsys_mask from cgroup_root to cgroup to prepare for
the unified hierarhcy; however, it turns out that carrying the
subsys_mask of the children in the parent, instead of itself, is a lot
more natural. This patch restores cgroup_root->subsys_mask and morphs
cgroup->subsys_mask into cgroup->child_subsys_mask.
* Uses of root->cgrp.subsys_mask are restored to root->subsys_mask.
* Remove automatic setting and clearing of cgrp->subsys_mask and
instead just inherit ->child_subsys_mask from the parent during
cgroup creation. Note that this doesn't affect any current
behaviors.
* Undo __kill_css() separation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit ea8fd3b47ff4ed4b1b5942bf3e0cb8d8f590ec59
Author: Tejun Heo <tj@kernel.org>
Date: Wed Apr 23 11:13:14 2014 -0400
cgroup: cgroup_apply_cftypes() shouldn't skip the default hierarhcy
cgroup_apply_cftypes() skip creating or removing files if the
subsystem is attached to the default hierarchy, which led to missing
files in the root of the default hierarchy.
Skipping made sense when the default hierarchy was dummy; however, now
that the default hierarchy is full functional and planned to be used
as the unified hierarchy, it shouldn't be skipped over.
Reported-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 1bae363f29fd20fb3271b194bd11de8d3693ddfd
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Feb 11 17:49:24 2014 -0500
replace checking for ->read/->aio_read presence with check in ->f_mode
Since we are about to introduce new methods (read_iter/write_iter), the
tests in a bunch of places would have to grow inconveniently. Check
once (at open() time) and store results in ->f_mode as FMODE_CAN_READ
and FMODE_CAN_WRITE resp. It might end up being a temporary measure -
once everything switches from ->aio_{read,write} to ->{read,write}_iter
it might make sense to return to open-coded checks. We'll see...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 33e259bc633fa29dedbe468c623178b373c6e5c2
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 2 07:06:30 2014 -0400
xfs: trim the argument lists of xfs_file_{dio,buffered}_aio_write()
pos is redundant (it's iocb->ki_pos), and iov/nr_segs/count are taken
care of by lifting iov_iter into the caller.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 8825ae072a0b8a0e3694d48dfbb4b160417d6b6d
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Mar 22 06:57:37 2014 -0400
blkdev_aio_read(): switch to generic_file_read_iter(), get rid of iov_shorten()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 3532a380b524e1a661d41233a88458b8a0417ad9
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Mar 22 06:51:37 2014 -0400
iov_iter_truncate()
Now It Can Be Done(tm) - we don't need to do iov_shorten() in
generic_file_direct_write() anymore, now that all ->direct_IO()
instances are converted to proper iov_iter methods and honour
iter->count and iter->iov_offset properly.
Get rid of count/ocount arguments of generic_file_direct_write(),
while we are at it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 3ab3d550e3a9e0defd5593cd19bf08ec1430b73e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Mar 22 05:15:17 2014 -0400
btrfs: switch check_direct_IO() to iov_iter
... and don't open-code iov_iter_alignment() there
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit ef9d131c1a5a44082f3a4991ce06bae6f0029d93
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Fri Mar 21 04:58:33 2014 -0400
new helper: iov_iter_get_pages_alloc()
same as iov_iter_get_pages(), except that pages array is allocated
(kmalloc if possible, vmalloc if that fails) and left for caller to
free. Lustre and NFS ->direct_IO() switched to it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit f6aa53bb90317775b773937c7b745400d53dd420
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 19 01:16:16 2014 -0400
new helper: iov_iter_npages()
counts the pages covered by iov_iter, up to given limit.
do_block_direct_io() and fuse_iter_npages() switched to
it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 4f67be7e0d63af0a5b5ea6e2009474f618e04744
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Mar 16 18:07:34 2014 -0400
f2fs: switch to iov_iter_alignment()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit a05488006528bcbe1fbc2cba6e09d986647622ab
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Mar 16 16:08:30 2014 -0400
fuse: switch to iov_iter_get_pages()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit c48074c3bc8738caed4d3390e5ee304468b13071
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sun Mar 16 15:50:47 2014 -0400
fuse: pull iov_iter initializations up
... to fuse_direct_{read,write}(). ->direct_IO() path uses the
iov_iter passed by the caller instead.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 8baf89f7f47494fd8cdfcc2064b3e463f77e25d7
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Sat Mar 15 04:05:57 2014 -0400
new helper: iov_iter_get_pages()
iov_iter_get_pages(iter, pages, maxsize, &start) grabs references pinning
the pages of up to maxsize of (contiguous) data from iter. Returns the
amount of memory grabbed or -error. In case of success, the requested
area begins at offset start in pages[0] and runs through pages[1], etc.
Less than requested amount might be returned - either because the contiguous
area in the beginning of iterator is smaller than requested, or because
the kernel failed to pin that many pages.
direct-io.c switched to using iov_iter_get_pages()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 9490d1a6228a2552560296941984d80c69e8a6bd
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon Mar 10 02:30:55 2014 -0400
dio: take updating ->result into do_direct_IO()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 4c30a968eb3a065e3e272d976d7e3f6ddc761101
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 5 19:28:09 2014 -0500
start adding the tag to iov_iter
For now, just use the same thing we pass to ->direct_IO() - it's all
iovec-based at the moment. Pass it explicitly to iov_iter_init() and
account for kvec vs. iovec in there, by the same kludge NFS ->direct_IO()
uses.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit e81b9541171cbcfc4e8566a1e9ab2ca2335d0f15
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 5 22:53:04 2014 -0500
new helper: generic_file_read_iter()
iov_iter-using variant of generic_file_aio_read(). Some callers
converted. Note that it's still not quite there for use as ->read_iter() -
we depend on having zero iter->iov_offset in O_DIRECT case. Fortunately,
that's true for all converted callers (and for generic_file_aio_read() itself).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 4990248714e06d4374aab11b62254f923490c033
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 5 22:52:34 2014 -0500
fuse_file_aio_write(): merge initializations of iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit aaa4861d704d889c846122bcd36c753dd6916879
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 5 19:22:23 2014 -0500
ceph_aio_read(): keep iov_iter across retries
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 1b21d12fee77f6aa95d03cf7e9d1ce5eb2c607ec
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 5 13:50:45 2014 -0500
new primitive: iov_iter_alignment()
returns the value aligned as badly as the worst remaining segment
in iov_iter is. Use instead of open-coded equivalents.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit bf7b4e0ee881cd951c7b683f406a4ac252a24e98
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon Mar 10 14:08:45 2014 -0400
give ->direct_IO() a copy of iov_iter
the thing is, we want to advance what's given to ->direct_IO() as we
are forming the request; however, the callers care about the amount
of data actually transferred, not the amount we tried to transfer.
It's more convenient to allow ->direct_IO() instances do use
iov_iter_advance() on the copy of iov_iter, leaving the actual
advancing of the original to caller.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 0eff84022e9c9e9ccac35cb7ed2eb93a445d136b
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Mar 5 01:33:16 2014 -0500
switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit b409cc67bf3ddf0ba54f86360cbbf1ad94ee0d37
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Mar 4 22:38:00 2014 -0500
get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 693f0274ba3727f15f5e68e11db916cc96e5017d
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Mar 4 22:14:00 2014 -0500
ext4: switch the guts of ->direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit c59595763d0ef48d730112df43b7018a78900200
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Mar 4 21:53:33 2014 -0500
convert the guts of nfs_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 2df2941e9a55b73006fe2f551a2f1d7562c1418e
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Mar 4 21:27:34 2014 -0500
pass iov_iter to ->direct_IO()
unmodified, for now
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 1a44a0229c66390565b7286b004004429eaf3d69
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Tue Mar 4 15:24:06 2014 -0500
kill generic_segment_checks()
all callers of ->aio_read() and ->aio_write() have iov/nr_segs already
checked - generic_segment_checks() done after that is just an odd way
to spell iov_length().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 01403ea77d2475936815241ae2756d1778f277fe
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon Mar 3 22:09:39 2014 -0500
__btrfs_direct_write(): switch to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 91b718d74f2edf46f530ebe143d0041982bcf6b9
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Mon Mar 3 22:03:20 2014 -0500
generic_file_direct_write(): switch to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 0b7a9814dbf392aa5671dfee1e55d08b349de7c8
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Thu Apr 10 20:54:51 2014 -0400
kill iov_iter_copy_from_user()
all callers can use copy_page_from_iter() and it actually simplifies
them.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 52a995d9adb5383e168cb9ec90a173de43c4a8cb
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 23 10:18:46 2014 -0400
fs/file.c: don't open-code kvfree()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 3c91dc1ce40f973bbceded3d8ce96bda7c4d480c
Author: Al Viro <viro@zeniv.linux.org.uk>
Date: Wed Apr 23 10:13:03 2014 -0400
nick kvfree() from apparmor/lib
too many open-coded instances
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
commit 0c66c5628bbb5e96360032440f53a6cb6f8973d0
Author: Phil Edworthy <phil.edworthy@renesas.com>
Date: Tue Apr 22 17:38:05 2014 +0100
sh-pfc: r8a7791: Fix definition of MOD_SEL3
There is a missing 0 entry from the MOD_SEL3 table.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 34ce57e9df7d14b52c7613bb2c190e411ca99186
Author: Guido Piasenza <gpiasenza@soft-in.com>
Date: Tue Apr 22 16:28:03 2014 +0100
sh-pfc: r8a7790: Fix definition of IPSR5
The extra entry in the table makes SCIFA0_B, and all
peripherals after it, fail.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 625cb407b85a9e4208f1db5377cc08dd4a0d5387
Author: Andy Gross <agross@codeaurora.org>
Date: Mon Apr 14 22:10:36 2014 -0500
dt: Document Qualcomm IPQ8064 pinctrl binding
Define a new binding for the Qualcomm TLMMv2 based pin controller inside the
IPQ8064.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit b4da6573e7e2f8bd54abdb3e78a7b1d61c34d6f3
Author: Andy Gross <agross@codeaurora.org>
Date: Mon Apr 14 22:10:35 2014 -0500
pinctrl: qcom: Add definitions for IPQ8064
This adds pinctrl definitions for the GPIO pins of the TLMM v2 block in the
Qualcomm IPQ8064 platform.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 58968625c496c2e39545781915dbb848b38bd249
Author: Tony Lindgren <tony@atomide.com>
Date: Thu Apr 10 16:47:19 2014 -0700
pinctrl: single: Clear pin interrupts enabled by bootloader
Since we set up device wake-up interrupts as pinctrl-single
interrupts, we now must use the standard request_irq and
related functions to manage them.
If the pin interrupts are enabled for some pins at boot,
the wake-up events can show up as constantly pending
at least on omaps and will hang the system unless the related
device driver clears the event at the device.
To fix this, let's clear the interrupt flags during init,
and print out a warning so the board maintainers can update
their drivers to do proper request_irq for the driver specific
wake-up events.
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 02b5269a24dfadf2fda6b427b84ee57bd3a06a72
Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Tue Apr 22 15:38:06 2014 +0200
pinctrl: sunxi: list all pinctrl compatible strings
List all sunxi pinctrl compatible strings in order to be able to grep for
those values.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 93eb1c1b2f648064a11d6f5cab104fb06701ad0b
Author: Axel Lin <axel.lin@ingics.com>
Date: Fri Apr 11 14:16:01 2014 +0800
gpio: rdc321x: Convert to use devm_kzalloc
This saves a few unwind code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
commit 59f0f119e85cfb173db518328b55efbac4087c9f
Author: Ritesh Harjani <ritesh.harjani@gmail.com>
Date: Mon Apr 21 12:17:27 2014 +0530
arm: dma-mapping: Fix mapping size value
68efd7d2fb("arm: dma-mapping: remove order parameter from
arm_iommu_create_mapping()") is causing kernel panic
because it wrongly sets the value of mapping->size:
Unable to handle kernel NULL pointer dereference at virtual
address 000000a0
pgd = e7a84000
[000000a0] *pgd=00000000
...
PC is at bitmap_clear+0x48/0xd0
LR is at __iommu_remove_mapping+0x130/0x164
Fix it by correcting mapping->size value.
Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
commit 3dcba280f739772a4156fbcdae39229d6bb5e02b
Author: Nicolin Chen <Guangyu.Chen@freescale.com>
Date: Mon Apr 21 19:14:46 2014 +0800
ASoC: core: Don't break component searching if both id and num_dai are 0
The commit e41975ed (ASoC: core: Fix the DAI name getting) added a break
within the "if (id < 0 || id >= pos->num_dai)" while the original design
of the search didn't break the loop if that condition contented but only
mark the ret error and let it go on to search the next component.
In a case like dmaengine which's not a dai but as a component sharing an
identical name with a dai, both the id and pos->num_dai here could be 0.
If we break the search, we may never find the dai we want as it might be
placed behind its dmaengine in the component list.
So this patch fixes the issue above by following the original design to
let the search carry on.
Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit def8397c115dd456f80e7e5202bba8c2df79f936
Author: Daniel Mack <zonque@gmail.com>
Date: Fri Mar 28 19:05:05 2014 +0100
ASoC: ak4104: Add regulator to documentation
Add the vdd supply to Documentation/devicetree/bindings/sound/ak4104.txt.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit b38d10ed604a1adaafa82512867d0eb7e219d491
Author: Daniel Mack <zonque@gmail.com>
Date: Thu Mar 27 21:42:15 2014 +0100
ASoC: ak4104: add regulator consumer support
The AK4104 has only one power supply, called VDD. Enable it as long as
the codec is in use.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit b3ca11ff59bc5842b01f13421a17e6d9a8936784
Author: Jyri Sarha <jsarha@ti.com>
Date: Mon Mar 24 12:15:25 2014 +0200
ASoC: simple-card: Move dai-link level properties away from dai subnodes
The properties like format, bitclock-master, frame-master,
bitclock-inversion, and frame-inversion should be common to the dais
connected with a d…
ddstreet
referenced
this pull request
in ddstreet/linux
May 2, 2014
GIT bdd4c30bd51d9037bf66f22af3fb3e0ec7a69c51
commit 4985c32ee4241d1aba1beeac72294faa46aaff10
Author: Lan Tianyu <tianyu.lan@intel.com>
Date: Wed Apr 30 15:46:33 2014 +0800
ACPI / processor: Fix failure of loading acpi-cpufreq driver
According commit d640113fe (ACPI: processor: fix acpi_get_cpuid for UP
processor), BIOS may not provide _MAT or MADT tables and acpi_get_apicid()
always returns -1. For these cases, original code will pass apic_id with
vaule of -1 to acpi_map_cpuid() and it will check the acpi_id. If acpi_id
is equal to zero, ignores apic_id and return zero for CPU0.
Commit b981513 (ACPI / scan: bail out early if failed to parse APIC
ID for CPU) changed the behavior. Return ENODEV when find apic_id is
less than zero after calling acpi_get_apicid(). This causes acpi-cpufreq
driver fails to be loaded on some machines. This patch is to fix it.
Fixes: b981513f806d (ACPI / scan: bail out early if failed to parse APIC ID for CPU)
References: https://bugzilla.kernel.org/show_bug.cgi?id=73781
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Reported-and-tested-by: KATO Hiroshi <katoh@mikage.ne.jp>
Reported-and-tested-by: Stuart Foster <smf.linux@ntlworld.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit f2cc34cbaee306d8ea6ece0dcbbaf4c19444faf5
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 30 13:13:18 2014 +0200
MIPS: math-emu: Don't needlessly pass a struct around.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 5ffb0e1858aa21ae1f5ded65430cd5e248463890
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 30 11:09:44 2014 +0200
MIPS: math-emu: Reduce mipsMIPS bloat.
Move microMIPS32_to_MIPS32() to a separate file which only gets built
for mipsMIPS configurations; for other configurations the optimizer
eleminates calls to microMIPS32_to_MIPS32().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit da217aaa16d053ee3f99ee81fbe8a90a29de8a9f
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 30 11:21:55 2014 +0200
MIPS: math-emu: Switch to using the MIPS rounding modes.
Previously math-emu was using the IEEE-754 constants internally. These
were differing by having the constants for rounding to +/- infinity
switched, so a conversion was necessary. This would be entirely
avoidable if the MIPS constants were used throughout, so get rid of
the bloat.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 90e839aa32328adce70ecf7f8aecc8e329b18d45
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 30 01:17:19 2014 +0200
MIPS: math-emu: Nuke alternative names for IEEE-754 rounding modes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 4c6b4072da43920309df8dc4372bb61967b3e741
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 29 15:21:24 2014 +0200
MIPS: Sort out mm_isBranchInstr.
mm_isBranchInstr() did reside in the math emu code even though it logically
is separate and also is used outside the math emu code. In addition GCC 4.9.0
leaves the following unnnecessarily bloated function body for a non-microMIPS
configuration:
<mm_isBranchInstr>:
105c: afa50004 sw a1,4(sp)
1060: afa60008 sw a2,8(sp)
1064: afa7000c sw a3,12(sp)
1068: 03e00008 jr ra
106c: 00001021 move v0,zero
which stores arguments that are never going to be used on the stack frame.
Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr()
into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function
which only invokes __mm_isBranchInstr() on microMIPS configurations.
This shaves off 112 bytes off the kernel and improves code flow a bit.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 1972ff35bcb83355e9829a54226451bd3419de5b
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 29 01:49:24 2014 +0200
MIPS: Diable MIPS16/microMIPS crap for platforms not supporting these ASEs.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit be2ad4ab594139a09c7a71972752a53bdd5a9541
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Mon Apr 28 22:34:01 2014 +0200
MIPS: math-emu: Inline fpu_emulator_init_fpu()
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 205eed26395b15621ee27f535b142d4a30b5e2af
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 26 01:49:14 2014 +0200
MIPS: math-emu: Cleanup coding style.
o Only define variables in the outermost block
o One empty line at most
o Format comments as per CodingStyle
o Update FSF address in licensing term comment
o Spell FPU and MIPS in all capitals.
o Remove ####-type of lines in comments.
o Try to make things a bit most consistent between sp_*.c / dp_*.c files.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 716ead6c3d519e012e66b069a3ad70c4bfe5545f
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 15:48:40 2014 +0200
MIPS: math-emu: Cleanup definition of structs describe sp/dp floats.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit d9d29fb7b97c41233036ea3f748e179b87765066
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 10:54:06 2014 +0200
MIPS: math-emu: Rename get_rounding() functions.
There are two version of get_rounding(), one for single precision, one
for double precision. Add a ieee754sp_ rsp. ieee754dp_ prefix for
clarity.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit d8a30e453168fbf27366a0501561fab10a14483a
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 03:19:57 2014 +0200
MIPS: math-emu: Get rid of the useless parts of exception handling.
All it really did was throw a printk for no obvious reason.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 00102ccacf0b4ddedf920fd90936efc3bc28fdf8
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 01:52:46 2014 +0200
MIPS: math-emu: Move various objects into an ar library.
ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain
code which for MIPS I/II/III systems we don't want to link. Again the
savings can be considerable for some systems:
$ mips-linux-size --totals ieee754d.o dp_sqrt.o sp_sqrt.o
text data bss dec hex filename
1624 0 0 1624 658 ieee754d.o
2016 0 0 2016 7e0 dp_sqrt.o
736 0 0 736 2e0 sp_sqrt.o
4376 0 0 4376 1118 (TOTALS)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit ba72c2bff9799daf98b9e41474830b14ae4f0235
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 00:40:42 2014 +0200
MIPS: math-emu: Inline ieee754sp_issnan and ieee754dp_issnan.
Shaves another 16 bytes off but more importantly avoids function calls.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 901615320d62a23f8fbf6066ea111bb919ae6d77
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 00:29:50 2014 +0200
MIPS: math-emu: Remove unused code.
Shrinks the FPU emulator by 4528 bytes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 686c7831f0c9884682197f4963262251d0e59b72
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 22 17:11:01 2014 +0200
MIPS: math-emu: Remove unused ieee754sp_bestnan() and ieee754dp_bestnan().
Both are unused since lmo commit fdffbafbb38723618626c70ffdc6ff9175cdffa2
[Lots of FPU bug fixes from Kjeld Borch Egevang.]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit e9e6315f4c9e51dfba1d6d04a39a4d4203a18bd8
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 22 16:52:01 2014 +0200
MIPS: math-emu: Inline ieee754dp_finite and ieee754dp_finite().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 0efd4e5319ca8063c00d1c4abfe6af3976942006
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 22 16:33:07 2014 +0200
MIPS: math-emu: Eleminate duplicate definitions of identical macros.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit ebce471716566929d7741d3749465e662b8b7eb6
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 22 16:02:03 2014 +0200
MIPS: math-emu: Use SPSIGN() rather than DPSIGN() in ieee754sp_sub().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 4736f6c82064c48d8e8fda544fdb755dd2d6e3a2
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 22 15:51:55 2014 +0200
MIPS: math-emu: Replace DP_MBITS with DP_FBITS and SP_MBITS with SP_FBITS.
Both were defined as 23 rsp. 52 though the mentissa is actually a bit more
than the fraction.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit dd562af3b03c3ff4129c0b4ab962643935a5762c
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue Apr 22 13:31:24 2014 +0200
MIPS: math-emu: Call ieee754di_xcpt, not ieee754si_xcpt in ieee754dp_cmp.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 28c80109e8ddd31a640786f119fd737fcc21d673
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sun Apr 20 01:20:08 2014 +0200
MIPS: math-emu: Cleanup stdarg usage including apparently bogus comment.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit ed51751f2a8c5070050e567e26471a1851af0f6a
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 23:01:34 2014 +0200
MIPS: math-emu: Remove #if 1 and dead code from its #else branch.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 7d377570c86ec27db24e118b6db7e23c0c7dee30
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 14:20:54 2014 +0200
MIPS: math-emu: Cleanup ieee754si_indef() / ieee754di_indef().
LONG_LONG_MAX is a symbol defined in <limits.h> which may not be available
so better rely on something provided by a kernel header. While at it,
turn these function-like macros into inline functions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 47afdfb05fc1ada6dab0dce0b56318c46191237e
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 14:03:37 2014 +0200
MIPS: math-emu: Convert debug printks to pr_debug getting.
And another bunch of #ifdefs bite the dust.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 14806c44887eba0e08a82571a248bfa10d3d5ce0
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 13:18:08 2014 +0200
MIPS: math-emu: Get rid of unuable extended precision support.
No usable functionality and nothig does ever define IEEE854_XP anyway.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit cd4f463270109c1af32de2f252500832de3f542a
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 25 15:52:18 2014 +0200
MIPS: IP22: This platform may come with either MIPS III or MIPS IV CPUs.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit f5d9f0d858c453177b65bf5c1fc4dc2bac60ec78
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 13:11:37 2014 +0200
MIPS: math-emu: Remove most ifdefery.
Most of these tests should be runtime tests. This also finally means
that on a MIPS III systems MIPS IV opcodes are going to result in an
exception as they're supposed to.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 77780b5f2b07ea492b116d4b6869763bb40691dc
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 00:36:32 2014 +0200
MIPS: math-emu: Turn macros into functions where possible.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 9285476701712dd9c10fd5b0ac6b149d87a576cc
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Sat Apr 19 00:15:40 2014 +0200
MIPS: math-emu: Harden ieee754int.h against multiple inclusion.
The header file had no include guards; this only happened to work because
the file only contains macro definitions and protypes.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 25c5450fa5de273285c3ffece87e962432984b3f
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 11:00:12 2014 +0200
MIPS: math-emu: Reformat code according to coding style.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit ef3b11ea239ba6b5cc8ffc6abea54d9af27d4565
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 02:46:11 2014 +0200
MIPS: math-emu: Move all debug fs code to a separate file.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit c387da86eb331e1b60c97023d8d01c8a9adeb816
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 02:24:08 2014 +0200
MIPS: math-emu: Remove fine example of cargo cult programming.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 245d8273576c9abc0d8114eb8fe6899ea4f90674
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 02:09:53 2014 +0200
MIPS: math-emu: Header file weeding.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 06d38d9c0764cc47cdbee808f657726d90a66ea9
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 02:09:04 2014 +0200
MIPS: branch: Make inclusion of <asm/branch.h> safe.
It was relying on other headers having been included before.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit b1bd59690e8a31303ae68f00ef88d25b27a3a18e
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 01:59:03 2014 +0200
MIPS: math-emu: Use helpers to manipulate CAUSEF_BD flag.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 9266256b4b17a59937171516e8e0990df74a4e96
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 01:52:32 2014 +0200
MIPS: branch: New helpers to modify branch delay slot flag in struct pt_regs
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit a7375a04fdd80fad105fc4394e2df1400f9547c2
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 01:31:11 2014 +0200
MIPS: math-emu: Get rid of typedefs.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit a43bbf810e9d5d07902b958085b3bb9da938f836
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 01:16:02 2014 +0200
MIPS: math-emu: Use English spelling of `constant' rather than Danish.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 4bed0701d3f817c5727a7f7c693e50cbd4f85854
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 00:47:59 2014 +0200
MIPS: math-emu: Mark exception handling functions as __cold.
Optimizes the code flow and shaves of half a percent of the math-emu
code size.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 2055b05e09d9afb04a1b0a65e2e092a53b52b14a
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 00:40:02 2014 +0200
MIPS: math-emu: Use __BITFIELD_FIELD to eleminate redundant definitions.
Union _ieee754sp was even duplicated even though there are no endian
dependencies in it all.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 3a8e0f1b5c26ec41dded7e3b870e6f079f130ee6
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 00:39:02 2014 +0200
MIPS: Move definition of __BITFIELD_FIELD to sharable header.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 96bc2c97ecf70f51b70fe201b27caff3f2543f11
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 00:31:51 2014 +0200
MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD.
<uapi/asm/inst.h> is exported to userland so the macro name BITFIELD_FIELD
pollutes the namespace. Prefix the name with __ fixes this.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 2c9b25c59796e9e5f01193d15dde501e9af59714
Author: Christian Engelmayer <cengelma@gmx.at>
Date: Sat Feb 8 20:02:21 2014 +0100
drm: qxl: Remove unused device pointer
Remove occurrences of unused struct qxl_device pointer in functions
qxl_ttm_fault() and qxl_init_mem_type().
Detected by Coverity: CID 1019128, CID 1019129.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 3723aaa123147dc777bf86d7104b8fc4b3b56ff3
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Wed Apr 16 00:31:51 2014 +0200
MIPS: inst.h: Rename BITFIELD_FIELD to __BITFIELD_FIELD.
<uapi/asm/inst.h> is exported to userland so the macro name BITFIELD_FIELD
pollutes the namespace. Prefix the name with __ fixes this.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit d7f369636745788e64ac217f610dad381fb5431c
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Fri Apr 11 18:28:00 2014 +0200
MIPS: Remove file missed when removing rm9k support a while ago.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit a68ce6507a4545f1fc83c035603234d7898a0dc3
Author: Aaro Koskinen <aaro.koskinen@iki.fi>
Date: Thu Apr 3 22:24:01 2014 +0300
MIPS/loongson2_cpufreq: Fix CPU clock rate setting
Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has
been unnoticed, as loongson2_cpufreq was the only place where the rate
was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656
(cpufreq: introduce cpufreq_generic_get() routine) things however broke,
and now loops_per_jiffy adjustments are incorrect (1000 times too long).
The patch fixes this by changing cpu_clk rate to Hz.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: cpufreq@vger.kernel.org
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Patchwork: https://patchwork.linux-mips.org/patch/6678/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit d3b8acbdaaaebe2dd85d96f4c49b63bf6cc35896
Author: Paul Bolle <pebolle@tiscali.nl>
Date: Thu Apr 3 11:10:20 2014 +0200
MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ
Commit 0e476d91244e ("MIPS: Loongson: Add Loongson-3 Kconfig options")
added "select GENERIC_HARDIRQS_NO__DO_IRQ". But the Kconfig symbol
GENERIC_HARDIRQS_NO__DO_IRQ was already removed in v2.6.38, so that
select is a nop. Drop it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/6677/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit fa3357d9e109352f42c231fc3833e10951845185
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Fri Apr 4 03:32:54 2014 +0100
MIPS: csum_partial.S CPU_DADDI_WORKAROUNDS bug fix
This change reverts most of commit
60724ca59eda766a30be57aec6b49bc3e2bead91 [MIPS: IP checksums: Remove
unncessary .set pseudos] that introduced warnings with the
CPU_DADDI_WORKAROUNDS option set:
arch/mips/lib/csum_partial.S: Assembler messages:
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
[...]
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
[and so on, and so on...]
The warnings are benign and good code is produced regardless because no
macros that'd use the assembler's temporary register are involved, however
the `.set noat' directives removed by the commit referred are crucial to
guarantee this is still going to be the case after any changes in the
future. Therefore they need to be brought back to place which this
change does.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6686/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 8faecff616e986f26651fe7d762d3a7ef52a659c
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Fri Apr 4 03:32:29 2014 +0100
MIPS: __strncpy_from_user_asm CPU_DADDI_WORKAROUNDS bug fix
This corrects assembler warnings and broken code generated in
__strncpy_from_user_asm:
arch/mips/lib/strncpy_user.S: Assembler messages:
arch/mips/lib/strncpy_user.S:52: Warning: Macro instruction expanded into
multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set. The function schedules delay
slots manually where there is really no need to as GAS is happy to do it
all itself, so undo it all and remove `.set noreorder'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6685/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 32da28eff6b732b64d4ab4c3d511e7fe718ff3d9
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Tue Apr 1 00:57:28 2014 +0100
MIPS: __delay CPU_DADDI_WORKAROUNDS bug fix
With CPU_DADDI_WORKAROUNDS enabled __delay assembles with a macro in a
branch delay slot:
{standard input}: Assembler messages:
{standard input}:18: Warning: Macro instruction expanded into multiple
instructions in a branch delay slot
and broken code results:
0000000000000000 <__delay>:
0: 1480ffff bnez a0,0 <__delay>
4: 24010001 li at,1
8: 0081202f dsubu a0,a0,at
c: 03e00008 jr ra
10: 00000000 nop
14: 00000000 nop
Consequently the function loops indefinitely, showing up prominently as a
hang in the delay loop calibration at bootstrap.
This change corrects the problem by forcing the immediate 1 into a
register while keeping code produced identical where CPU_DADDI_WORKAROUNDS
is disabled.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6669/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 5da3e85530328543c66313d4dbbb3b426f838eb5
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Tue Apr 1 00:14:41 2014 +0100
MIPS: DEC/SNI: O32 wrapper stack switching fixes
Commit 231a35d37293ab88d325a9cb94e5474c156282c0 [[MIPS] RM: Collected
changes] broke DECstation support by introducing an incompatible copy of
arch/mips/dec/prom/call_o32.S in arch/mips/fw/lib/, built unconditionally.
The copy happens to land earlier of the two among the modules used in the
link and is therefore chosen for the DECstation rather than the intended
original. As a result random kernel data is corrupted because a pointer
to the "%s" formatted output template is used as a temporary stack pointer
rather than being passed down to prom_printf. This also explains why
prom_printf still works, up to a point -- the next argument is the actual
string to output so it works just fine as the output template until enough
kernel data has been corrupted to cause a crash.
This change adjusts the modified wrapper in arch/mips/fw/lib/call_o32.S to
let callers request no stack switching by passing a null temporary stack
pointer in $a1, reworks the DECstation callers to work with the updated
interface and removes the old copy from arch/mips/dec/prom/call_o32.S. A
few minor readability adjustments are included as well, most importantly
O32_SZREG is now used throughout where applicable rather than hardcoded
multiplies of 4 and $fp is used to access the argument save area as a more
usual register to operate the stack with rather than $s0.
Finally an update is made to the temporary stack space used by the SNI
platform to guarantee 8-byte alignment as per o32 requirements.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6668/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 54777d14e2ab5703c212ef0a9913db76d03f158d
Author: Maciej W. Rozycki <macro@linux-mips.org>
Date: Mon Mar 31 23:51:30 2014 +0100
MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes
Commit 69f24d1784b631b81a54eb57c49bf46536dd2382 [MIPS: Optimize
current_cpu_type() for better code.] missed an update for two DECstation
bus error support files that now do not build, this is a fix.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6667/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit c5a8cf7a7ad5ab022660015597380b554f4358e5
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Thu Apr 3 13:29:06 2014 +0200
MAINTAINERS: TURBOchannel: Update entry
Add mailing list and patchwork URL so patches now have a defined path.
Also add myself as a TURBOchannel maintainer. However Maciej is going
to the the resident TURBOchannel guru.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
commit 8c6dbb589be1fe83bd0d8db8681a37e9d2f17bd9
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Thu Apr 3 13:14:05 2014 +0200
Revert "MIPS: MT: proc: Add support for printing VPE and TC ids"
Reverts commit 795038a6910937fa167d47f6f6183db0eb8fb706 because
d6d3c9afaab47418ab2d7f874fb8aeac1f067104 provides the same functionality
in a more generic way. Both patches applied however means that the
VPE and TC IDs get printed twice currently.
commit b87577b7c768683736eea28f70779e8c75b4df62
Author: Dave Airlie <airlied@redhat.com>
Date: Thu May 1 09:26:53 2014 +1000
drm: try harder to avoid regression when merging mode bits
For QXL hw we really want the bits to be replaced as we change
the preferred mode on the fly, and the same goes for virgl when
I get to it, however the original fix for this seems to have caused
a wierd regression on Intel G33 that in a stunning display of failure
at opposition to his normal self, Daniel failed to diagnose.
So we are left doing this, ugly ugly ugly ugly, Daniel you fixed
that G33 yet?, ugly, ugly.
Tested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 28c015a9daabe4ed3aeb0ccf669a3f1c2b8b81d5
Author: Murali Karicheri <m-karicheri2@ti.com>
Date: Thu Mar 20 22:08:32 2014 +0200
mtd: davinci-nand: disable subpage write for keystone-nand
Sub page write doesn't work because of hw issue in controller found on
Keystone SOCs. AEMIF controller is also used on DaVinci SOCs which
don't seems to have any issue. So add "ti,keysone-nand" compatible
to nand driver in order to set NAND_NO_SUBPAGE_WRITE option.
Cc: Warner Losh <imp@bsdimp.com>
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
commit 5a4e58bc693f04aa650219784e5e339e0db6b902
Author: Liu Ping Fan <kernelfans@gmail.com>
Date: Thu Nov 21 10:17:54 2013 +0800
powerpc/mm: use macro PGTABLE_EADDR_SIZE instead of digital
In case of extending the eaddr in future, use this macro
PGTABLE_EADDR_SIZE to ease the maintenance of the code.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit d5b35cffe3d3c2bc297b7c1fb997a6139de02e12
Author: Alistair Popple <alistair@popple.id.au>
Date: Mon Feb 24 18:00:56 2014 +1100
ppc476: Enable a linker work around for IBM errata #46
This patch adds an option to enable a work around for an icache bug on
476 that can cause execution of stale instructions when falling
through pages (IBM errata #46). It requires a recent version of
binutils which supports the --ppc476-workaround option.
The work around enables the appropriate linker options and ensures
that all module output sections are aligned to 4K page boundaries. The
work around is only required when building modules.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit e2c37d908336dc27c8b405f063c2a163124947fa
Author: Alistair Popple <alistair@popple.id.au>
Date: Thu Mar 6 14:52:28 2014 +1100
powerpc: Added PCI MSI support using the HSTA module
The PPC476GTR SoC supports message signalled interrupts (MSI) by writing
to special addresses within the High Speed Transfer Assist (HSTA) module.
This patch adds support for PCI MSI with a new system device. The DMA
window is also updated to allow access to the entire 42-bit address range
to allow PCI devices write access to the HSTA module.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit 2a2c74b2efcb1a0ca3fdcb5fbb96ad8de6a29177
Author: Alistair Popple <alistair@popple.id.au>
Date: Thu Mar 6 14:52:27 2014 +1100
IBM Akebono: Add the Akebono platform
This patch adds support for the IBM Akebono board.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit 6b11930f726c1d8a7c054f7a293621bce4c684c5
Author: Alistair Popple <alistair@popple.id.au>
Date: Thu Mar 6 14:52:26 2014 +1100
IBM Currituck: Clean up board specific code before adding Akebono code
The IBM Akebono code uses the same initialisation functions as the
earlier Currituck board. Rather than create a copy of this code for
Akebono we will instead integrate support for it into the same file as
the Currituck code.
This patch just renames the board support file and updates the Makefile.
Signed-off-by: Alistair Popple <alistair@popple.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit 983d8a6dda1d477f3ffa23a04cc2fa4d66fd93d1
Author: Tony Breeds <tony@bakeyournoodle.com>
Date: Wed Mar 12 19:17:07 2014 +1100
powerpc/le: Show the endianess of the LPAR under PowerVM.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
commit 9048e648bc22d7b59093f8ca1978c5767893aaa5
Author: Alexander Graf <agraf@suse.de>
Date: Tue Apr 1 15:46:05 2014 +0200
powerpc: Use 64k io pages when we never see an HEA
When we never get around to seeing an HEA ethernet adapter, there's
no point in restricting ourselves to 4k IO page size.
This speeds up IO maps when CONFIG_IBMEBUS is disabled.
[ Updated the test to also lift the restriction on arch 2.07
(Power 8) which cannot have an HEA
-- BenH ]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
foo
commit 605ee08ffa84e385e11ca85346d4fa7892aebc76
Author: Helge Deller <deller@gmx.de>
Date: Wed Apr 30 23:26:02 2014 +0200
parisc,metag: Do not hardcode maximum userspace stack size
This patch affects only architectures where the stack grows upwards
(currently parisc and metag only). On those do not hardcode the maximum
initial stack size to 1GB, but make it configurable via a config option.
The main problem with the hardcoded stack size is, that we have two
memory regions which grow upwards: stack and heap. To keep most of the
memory available for heap in a flexmap memoy layout, it makes no sense
to hard allocate up to 1GB of the memory for stack which can't be used
as heap then.
This patch makes the stack size configurable and uses 80MB as default
value which has been in use during the last few years on parisc and
which didn't showed any problems yet.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
commit a8d22396302b7e4e5f0a594c1c1594388c29edaf
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Apr 30 22:36:33 2014 +0200
PNP / ACPI: Do not return errors if _DIS or _SRS are not present
The ACPI PNP subsystem returns errors from pnpacpi_set_resources()
and pnpacpi_disable_resources() if the _SRS or _DIS methods are not
present, respectively, but it should not do that, because those
methods are optional. For this reason, modify pnpacpi_set_resources()
and pnpacpi_disable_resources(), respectively, to ignore missing _SRS
or _DIS.
This problem has been uncovered by commit 202317a573b2 (ACPI / scan:
Add acpi_device objects for all device nodes in the namespace) and
manifested itself by causing serial port suspend to fail on some
systems.
Fixes: 202317a573b2 (ACPI / scan: Add acpi_device objects for all device nodes in the namespace)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74371
Reported-by: wxg4net <wxg4net@gmail.com>
Reported-and-tested-by: <nonproffessional@gmail.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 22041fb05b66387b2854f789d1e1f55c7d07b4f4
Author: KY Srinivasan <kys@microsoft.com>
Date: Wed Apr 30 11:58:25 2014 -0700
hyperv: Properly handle checksum offload
Do checksum offload only if the client of the driver wants checksum to be
offloaded.
In V1 version of this patch, I addressed comments from
Stephen Hemminger <stephen@networkplumber.org> and
Eric Dumazet <eric.dumazet@gmail.com>.
In this version of the patch I have addressed comments from
David Miller.
This patch fixes a bug that is exposed in gateway scenarios.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 6ce29b0e2a04ea85617cd21099af67449a76f589
Author: Claudiu Manoil <claudiu.manoil@freescale.com>
Date: Wed Apr 30 14:27:21 2014 +0300
gianfar: Avoid unnecessary reg accesses in adjust_link()
For phy devices that don't issue interrupts upon link
state changes, phylib polls the link state resulting in
repeated calls to adjust_link(), even if the link state
didn't change. As a result, some mac registers are
repeatedly read and written with the same values, which
is not ok.
To fix this, adjust_link() has been refactored to check
first whether the link state has changed and to take action
only if needed, updating mac registers and local state
variables. The 'new_state' local flag, set if one of the
link params changed (link, speed or duplex), has been
rendered useless and removed by this refactoring.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 0cda345d1b2201dd15591b163e3c92bad5191745
Author: Liu Yu <allanyuliu@tencent.com>
Date: Wed Apr 30 17:34:09 2014 +0800
tcp_cubic: fix the range of delayed_ack
commit b9f47a3aaeab (tcp_cubic: limit delayed_ack ratio to prevent
divide error) try to prevent divide error, but there is still a little
chance that delayed_ack can reach zero. In case the param cnt get
negative value, then ratio+cnt would overflow and may happen to be zero.
As a result, min(ratio, ACK_RATIO_LIMIT) will calculate to be zero.
In some old kernels, such as 2.6.32, there is a bug that would
pass negative param, which then ultimately leads to this divide error.
commit 5b35e1e6e9c (tcp: fix tcp_trim_head() to adjust segment count
with skb MSS) fixed the negative param issue. However,
it's safe that we fix the range of delayed_ack as well,
to make sure we do not hit a divide by zero.
CC: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Liu Yu <allanyuliu@tencent.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e5744fe9d262d11131916d04ea79ea539fe296c0
Author: Brendan Hickey <bhickey@google.com>
Date: Wed Apr 30 10:24:38 2014 +0200
bpf_dbg: fix wrong register usage
The AND instruction is erroneously using the X register instead
of the K register.
Signed-off-by: Brendan Hickey <bhickey@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f114890cdf84d753f6b41cd0cc44ba51d16313da
Author: Vlad Yasevich <vyasevic@redhat.com>
Date: Tue Apr 29 10:09:51 2014 -0400
Revert "macvlan : fix checksums error when we are in bridge mode"
This reverts commit 12a2856b604476c27d85a5f9a57ae1661fc46019.
The commit above doesn't appear to be necessary any more as the
checksums appear to be correctly computed/validated.
Additionally the above commit breaks kvm configurations where
one VM is using a device that support checksum offload (virtio) and
the other VM does not.
In this case, packets leaving virtio device will have CHECKSUM_PARTIAL
set. The packets is forwarded to a macvtap that has offload features
turned off. Since we use CHECKSUM_UNNECESSARY, the host does does not
update the checksum and thus a bad checksum is passed up to
the guest.
CC: Daniel Lezcano <daniel.lezcano@free.fr>
CC: Patrick McHardy <kaber@trash.net>
CC: Andrian Nord <nightnord@gmail.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit cbdb04279ccaefcc702c8757757eea8ed76e50cf
Author: Vlad Yasevich <vyasevic@redhat.com>
Date: Tue Apr 29 10:09:50 2014 -0400
mactap: Fix checksum errors for non-gso packets in bridge mode
The following is a problematic configuration:
VM1: virtio-net device connected to macvtap0@eth0
VM2: e1000 device connect to macvtap1@eth0
The problem is is that virtio-net supports checksum offloading
and thus sends the packets to the host with CHECKSUM_PARTIAL set.
On the other hand, e1000 does not support any acceleration.
For small TCP packets (and this includes the 3-way handshake),
e1000 ends up receiving packets that only have a partial checksum
set. This causes TCP to fail checksum validation and to drop
packets. As a result tcp connections can not be established.
Commit 3e4f8b787370978733ca6cae452720a4f0c296b8
macvtap: Perform GSO on forwarding path.
fixes this issue for large packets wthat will end up undergoing GSO.
This commit adds a check for the non-GSO case and attempts to
compute the checksum for partially checksummed packets in the
non-GSO case.
CC: Daniel Lezcano <daniel.lezcano@free.fr>
CC: Patrick McHardy <kaber@trash.net>
CC: Andrian Nord <nightnord@gmail.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Jason Wang <jasowang@redhat.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit fc9f35010641ea85dd19d144b86cdd93156f1a1e
Author: Eric Dumazet <edumazet@google.com>
Date: Mon Apr 28 22:00:29 2014 -0700
tcp: increment retransmit counters in tlp and fast open
Both TLP and Fast Open call __tcp_retransmit_skb() instead of
tcp_retransmit_skb() to avoid changing tp->retrans_out.
This has the side effect of missing SNMP counters increments as well
as tcp_info tcpi_total_retrans updates.
Fix this by moving the stats increments of into __tcp_retransmit_skb()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 3dc638d13aced7baad40517a3d70b3b43bf6b90f
Author: Byungho An <bh74.an@samsung.com>
Date: Tue Apr 29 13:15:27 2014 +0900
net: sxgbe: Added set function for interrupt on complete
This patch adds set_rx_int_on_com function for interrupt when
dma is completed.
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 325b94f7e63080f3e371e35f063a8be138c1873b
Author: Byungho An <bh74.an@samsung.com>
Date: Tue Apr 29 13:15:17 2014 +0900
net: sxgbe: Added rxqueue enable function
This patch adds rxqueue enable function according to number of rxqueue
and adds rxqueue disable function for removing.
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 0a0347b1e65d0757024d9db0ffdeafb41a9d14f4
Author: Byungho An <bh74.an@samsung.com>
Date: Tue Apr 29 13:15:15 2014 +0900
net: sxgbe: sw reset moved to probe function
This patch moves sw reset to probe function because
sw reset is needed early stage before open function.
Signed-off-by: Byungho An <bh74.an@samsung.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit d2e752db6d05374a35dddb2e17864fe310fbcf69
Author: Roland Dreier <roland@purestorage.com>
Date: Mon Apr 28 17:36:20 2014 -0700
cxgb4: Decode PCIe Gen3 link speed
Add handling for " 8 GT/s" in print_port_info().
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 652f99ead8319941216c64d7f92c8dcdc9b95970
Author: Tobias Klauser <tobias.klauser@gmail.com>
Date: Mon Apr 28 23:23:13 2014 +0200
Altera TSE: Add missing include to silence sparse warnings
This fixes the following sparse warnings:
drivers/net/ethernet/altera/altera_msgdma.c:23:5: warning: symbol 'msgdma_initialize' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:28:6: warning: symbol 'msgdma_uninitialize' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:32:6: warning: symbol 'msgdma_reset' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:77:6: warning: symbol 'msgdma_disable_rxirq' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:83:6: warning: symbol 'msgdma_enable_rxirq' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:89:6: warning: symbol 'msgdma_disable_txirq' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:95:6: warning: symbol 'msgdma_enable_txirq' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:101:6: warning: symbol 'msgdma_clear_rxirq' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:107:6: warning: symbol 'msgdma_clear_txirq' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:114:5: warning: symbol 'msgdma_tx_buffer' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:129:5: warning: symbol 'msgdma_tx_completions' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:154:5: warning: symbol 'msgdma_add_rx_desc' was not declared. Should it be static?
drivers/net/ethernet/altera/altera_msgdma.c:181:5: warning: symbol 'msgdma_rx_status' was not declared. Should it be static?
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 1b4448815ee746f878ca4c6b8fffa23441f6d16c
Author: Tobias Klauser <tobias.klauser@gmail.com>
Date: Mon Apr 28 23:23:01 2014 +0200
Altera TSE: Fix DMA secriptor length initialization
sgdma_descrip is a function name as well as the name of a struct. In
sgdma_initialize(), we should initialize the descriptor length field
with the actual length of a descriptor not with the size of the
function. In order to prevent such things from happening in the future,
rename the function to sgdma_setup_descrip().
Found by sparse which yields the following warning:
drivers/net/ethernet/altera/altera_sgdma.c:74:30: warning: expression using sizeof on a function
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit ec4a340789be16831ae96be5f7552238a7a6e903
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:35 2014 +0200
drbd: use list_first_entry_or_null in first_peer_device/first_connection
If there are no peer_devices or connections, I'd rather have NULL
than some "arbitrary" address pretending to point to a struct.
Helps to avoid hard to debug symptoms, in case we ever try to use
and dereference a drbd_connection or drbd_peer_device
where we in fact don't have any connection at all.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit babea49ebe010d0a533b5db20fa63c327402a71c
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:34 2014 +0200
drbd: Allow attaching of a newly created device to any backing device
A newly created device was never exposed before, i.e. has a
exposed_data_uuid of 0. Then it is valid to attach to any current_uuid
of a backing device (of course also to a newly created one (4))
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 02df6fe145715f1d3858c0c65aed991f148b70b4
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:33 2014 +0200
drbd: Test cstate while holding req_lock
In case a connection transitions into C_TIMEOUT within the timer
function (request_timer_fn()) we need to make sure that the receiver
thread (potentially running on a different CPU) sees the updated
cstate later on.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit c1b3156f121fd301191e0b4c5fa2fec42cd17871
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:32 2014 +0200
drbd: use blk_set_stacking_limits()
...instead directly assigning to q->limits.discard_zeroes_data
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 08535466bce6bd91320990b9a614d52a3dc0f21d
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:31 2014 +0200
drbd: evaluate disk and network timeout on different requests
Just because it is the oldest not yet completed request
does not make it the oldest request waiting for disk.
Or waiting for the peer.
And we completely missed already completed requests
that would still hold references to activity log extents,
waiting only for the barrier ack.
Find two oldest not yet completely processed requests,
one that is still waiting for local completion,
and one that is still waiting for some response from the peer.
These may or may not be the same request object.
Then separately apply the network and disk timeouts, respectively.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 67cca286caa6e33f3134bd36834d2484538f4f78
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:30 2014 +0200
drbd: Fix a hole in the challange-response connection authentication
In the implementation as it was, the two peers sent each other
a challenge, and expects the challenge hashed with the shared
secret back.
A attacker could simply wait for the challenge of the peer, and
send the same challenge back. Then it waits for the response, and
sends the same response back.
Prevent this by not accepting a challenge from the peer that is
the same as the challenge sent to the peer.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit f9c78128f833ae3057884ca219259c8ae5db8898
Author: Lars Ellenberg <lars@linbit.com>
Date: Mon Apr 28 18:43:29 2014 +0200
drbd: always implicitly close last epoch when idle
Once our sender thread needs to wait_for_work(),
and actually needs to schedule(), just before we do that,
we already check if it is useful to implicitly close the last epoch.
The condition was too strict: only implicitly close the epoch,
if there have been no new (write) requests at all.
The assumption was that if there were new requests, they would
always be communicated one way or another, and would send necessary
epoch separating barriers explicitly.
This is not always true, e.g. when becoming diskless,
or while explicitly starting a full resync.
The last communicated epoch could stay open for a long time,
locking down corresponding activity log extents.
It is safe to always implicitly send that last barrier, as soon as we
determin that there cannot be more requests in the last communicated
epoch, even if there have been (uncommunicated) new requests in new
epochs meanwhile.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit e4d7d6f4d36daff6aad84f96e48debde8e6ed09e
Author: Lars Ellenberg <lars@linbit.com>
Date: Mon Apr 28 18:43:28 2014 +0200
drbd: add back some fairness to AL transactions
When batching more updates to the activity log into single transactions,
we lost the ability for new requests to force themselves into the active
set: all preparation steps became non-blocking, and if all currently
hot extents keep busy, they could starve out new incoming requests
to cold extents for quite a while.
This can only happen if your IO backend accepts more IO operations per
average DRBD replication round trip time than you have al-extents
configured.
If we have incoming requests to cold extents,
at least do one blocking update per transaction.
In an artificial worst-case workload on SSD with an asynchronous 600 ms
replication link, with al-extents = 7 (the minimum we allow), and
concurrent full resynch, without this patch, some write requests have
been observed to be starved for 40 seconds.
With this patch, application observed a worst case latency of twice the
replication round trip time.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit fa090e708a72f0ea9cbe067fba28cfb2b8b787af
Author: Lars Ellenberg <lars@linbit.com>
Date: Mon Apr 28 18:43:27 2014 +0200
drbd: keep max-bio size during detach/attach on disconnected primary
We want to store in persistent meta data what the peer DRBD can handle,
which, due to spreading requests to multiple bios,
may be more than its backing device can handle.
Otherwise, if a disconnected Primary temporarily loses access to its local data
as well, we may accidentally shrink the max-bio setting, portentially causing
already assembled, but not yet processed, application bios to be spuriously
failed due to device limits.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 074f4afeb2277bd5ecb9fa7f91eaffa55e262126
Author: Lars Ellenberg <lars@linbit.com>
Date: Mon Apr 28 18:43:26 2014 +0200
drbd: fix a race between start_resync and send_and_submit
In the drbd make request function, specifically in
drbd_send_and_submit(), we decide whether we want to send the actual
write request, or only a "set this block out of sync" information.
We do so based on the current connection state, while holding the req_lock.
The connection state is not supposed to change while holding the req_lock.
But in drbd_start_resync, we did change that state anyways,
while only holding the global_state_lock, which is enough to change
sync-after dependencies (paused vs active resync), but
not good enough to change the connection state.
Fix: in drbd_start_resync, first grab the req_lock to serialize with
drbd_send_and_submit(), before grabbing the global_state_lock
to be able to evaluate the sync-after dependencies.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 20c68fdea1646ed746abf19122d7699493927005
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:25 2014 +0200
drbd: Enable QUEUE_FLAG_DISCARD only if the peer can recieve P_TRIM
Allow the user of REQ_DISCARD.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 2f632aeb5302da93f760d965e970600b35907026
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:24 2014 +0200
drbd: prepare sending side for REQ_DISCARD
Note that I do NOT call __drbd_chk_io_error for failed REQ_DISCARD.
That may be wrong, though, or needs to differ between EOPNOTSUPP and
other errors...
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit a0fb3c47a1aae5d38a88ea858f14d6d088d05e07
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:23 2014 +0200
drbd: prepare receiving side for REQ_DISCARD
If the receiver needs to serve a discard request on a queue that does
not announce to be discard cabable, it falls back to do synchronous
blkdev_issue_zeroout().
We expect only "reasonably" large (up to one activity log extent?)
discard requests.
We do this to not to not block the receiver for too long in this
fallback code path, and to not set/clear too many bits inside one
spinlock_irq_save() in drbd_set_in_sync/drbd_set_out_of_sync,
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 9e276872fe1665ea158f0c6f40df13008fed2908
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:22 2014 +0200
drbd: allow parallel promote/demote actions
We plan to use genl_family->parallel_ops = true in the future,
but need to review all possible interactions first.
For now, only selectively drop genl_lock() in drbd_set_role(),
instead serializing on our own internal resource->conf_update mutex.
We now can be promoted/demoted on many resources in parallel,
which may significantly improve cluster failover times
when fencing is required.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit a910b12352f5ddee712c3423c31fbb8b312dde88
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:21 2014 +0200
drbd: perpare for genetlink parallel_ops
Because all administrative requests via genetlink have been globally
serialized via genl_lock(), we used to have one static struct
drbd_config_context "admin context".
Move this on-stack to the respective callback functions.
This will allow us to selectively drop the genl_lock()
(or use genl_family->parallel_ops) in the future.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 88ea685d33c75932fe90ed0b5d2cf68845462876
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:20 2014 +0200
drbd: Do not BUG() when connection breaks in a special way
When a 'cluster wide' disconnect executes, the result comes back
from the peer, and immediately after that the connection breaks
then _conn_rq_cond() reported back SS_CW_SUCCESS.
Therefore _conn_request_state() calls conn_set_state(), which
has a BUG() in it.
The BUG() is hit because conn_is_valid_transition() does not like
the transaction. Which goes back to is_valid_soft_transition()
returning SS_OUTDATE_WO_CONN.
This fix is to consider an error reported by is_valid_soft_transition()
even when the peer agreed to the transaction.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit e82998743385ca861b9ec919eb2ba8177ce72180
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:19 2014 +0200
drbd: don't let application IO pre-empt resync too often
Before, application IO could pre-empt resync activity
for up to hardcoded 20 seconds per resync request.
A very busy server could throttle the effective resync bandwidth
down to one request per 20 seconds.
Now, we only let application IO pre-empt resync traffic
while the current resync rate estimate is above c-min-rate.
If you disable the c-min-rate throttle feature (set c-min-rate = 0),
application IO will no longer pre-empt resync traffic at all.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 0e49d7b014c5d591a053d08888a455bd74a88646
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:18 2014 +0200
drbd: fix potential distributed deadlock during verify or resync
If max-buffers and socket buffer sizes are "too small" for the chosen
resync rate, this could lead potentially lead to a distributed deadlock,
which may or may not resolve itself via the "ko-count" and request
timeout mechanism, or could be resolved by forced disconnect.
One option to deal with this is proper configuration:
use larger max-buffer and socket buffers settings,
or reduce the resync rate.
But even with bad configuration we should not deadlock,
but "gracefully" recover.
The issue is avoided by using only up to max-buffers/2 for resync
requests, and by using max-buffers not as a hard limit for data buffer
allocations, but as a throttle threshold only.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 6377b9235056452cd5d592c3739baa379a8735fe
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:17 2014 +0200
drbd: resync: fix too large bursts for very slow rates
While merging adjacent dirty blocks into resync requests,
the resync rate throttle was disregarded.
For very low resync rates, the effective rate may have exceeded
the intended rate by a larger margin.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 9ae472605ad333d4db07da95cc42c68063d2cc0d
Author: Lars Ellenberg <lars.ellenberg@linbit.com>
Date: Mon Apr 28 18:43:16 2014 +0200
drbd: fix stalled resync detection in /proc/drbd
If we don't make resync or verify progress for "too long",
we want to flag it as "stalled".
Since 2010, "use rolling marks for resync speed calculation"
this "too long" was wrong by a factor of HZ.
With HZ 250, it would have been flagged as stalled
after 100 minutes.
Hardcode 3 minutes instead.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit cdc6af8df42313d632cb9ed79dd455daecbd8478
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:15 2014 +0200
drbd: Allow online layout change of AL while peer is not connected
If a user forces the operation he takes the blame in case
the peer does not have enough space. No reason to dey this...
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit d40e567149c7ac250344d1537261c87b2c3e852c
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:14 2014 +0200
drbd: Remove drbd_wrappers.h
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit d7fe69c6a1940c3f9c5bed08634b6dd868612cdf
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:13 2014 +0200
drbd: Leave IO suspended if the fence handler find the peer primary
Actually we are clearing the susp_fen flag if we are not going
to call a fencing handler.
For setting the susp_fen flag needs to be edge-triggerd, and not
level triggered.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 31007745a5f328b8d70d865c4a6118be01421b8c
Author: Philipp Reisner <philipp.reisner@linbit.com>
Date: Mon Apr 28 18:43:12 2014 +0200
drbd: Break a deadlock while concurrent fencing and establishing a connection
When we need to outdate the peer while being promoted to primary,
and the connection gets established at the same time, we deadlock
in drbd_try_outdate_peer() when trying to clear the susp_fen
bit.
Fix this by setting the STATE_SENT bit while holding the mutex.
Using drbd_change_state(.. , CS_HARD, ..) which does not block
until STATE_SENT is cleared, is only for clearness. It does
not contribute anything to the fix.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: …
ddstreet
referenced
this pull request
in ddstreet/linux
May 6, 2014
GIT feed28415e95fbfad6dae876e927622db253672e
commit eb9672f4a14bb7058c44efcc31c89737a7724d2c
Author: Daniel Borkmann <dborkman@redhat.com>
Date: Thu May 1 18:34:20 2014 +0200
net: filter: misc/various cleanups
This contains only some minor misc cleanpus. We can spare us the
extra variable declaration in __skb_get_pay_offset(), the cast in
__get_random_u32() is rather unnecessary and in __sk_migrate_realloc()
we can remove the memcpy() and do a direct assignment of the structs.
Latter was suggested by Fengguang Wu found with coccinelle. Also,
remaining pointer casts of long should be unsigned long instead.
Suggested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 30743837dd204d2b04fd4e9d3db78cc7b118c81a
Author: Daniel Borkmann <dborkman@redhat.com>
Date: Thu May 1 18:34:19 2014 +0200
net: filter: make register naming more comprehensible
The current code is a bit hard to parse on which registers can be used,
how they are mapped and all play together. It makes much more sense to
define this a bit more clearly so that the code is a bit more intuitive.
This patch cleans this up, and makes naming a bit more consistent among
the code. This also allows for moving some of the defines into the header
file. Clearing of A and X registers in __sk_run_filter() do not get a
particular register name assigned as they have not an 'official' function,
but rather just result from the concrete initial mapping of old BPF
programs. Since for BPF helper functions for BPF_CALL we already use
small letters, so be consistent here as well. No functional changes.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 5bcfedf06f7fdf9efcf65dc11198e9012f7530f4
Author: Daniel Borkmann <dborkman@redhat.com>
Date: Thu May 1 18:34:18 2014 +0200
net: filter: simplify label names from jump-table
This patch simplifies label naming for the BPF jump-table.
When we define labels via DL(), we just concatenate/textify
the combination of instruction opcode which consists of the
class, subclass, word size, target register and so on. Each
time we leave BPF_ prefix intact, so that e.g. the preprocessor
generates a label BPF_ALU_BPF_ADD_BPF_X for DL(BPF_ALU, BPF_ADD,
BPF_X) whereas a label name of ALU_ADD_X is much more easy
to grasp. Pure cleanup only.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f6a082fed1e6407c2f4437d0d963b1bcbe5f9f58
Author: John Fastabend <john.fastabend@gmail.com>
Date: Thu May 1 09:23:06 2014 -0700
net: sched: lock imbalance in hhf qdisc
hhf_change() takes the sch_tree_lock and releases it but misses the
error cases. Fix the missed case here.
To reproduce try a command like this,
# tc qdisc change dev p3p2 root hhf quantum 40960 non_hh_weight 300000
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit dfee07cceff94af498a8465353554e0b63c3b152
Author: Alexei Starovoitov <ast@plumgrid.com>
Date: Thu May 1 08:16:03 2014 -0700
net: filter: doc: expand and improve BPF documentation
In particular, this patch tries to clarify internal BPF calling
convention and adds internal BPF examples, JIT guide, use cases.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit a3464ed2f14d19ba923930f7c0c284499d64eb5b
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue Apr 15 17:00:03 2014 +0200
ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces
The Marvell Armada 380 SoC includes two AHCI compatible
interfaces. However, like all DMA-capable Marvell interface, they
require special handling to configure MBus windows. Therefore, this
commit adds a new ahci_mvebu driver, which relies on the
libahci_platform.c code recently introduced.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 5799d6d4cf86c11503aee909a1ec555453c7f22a
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue Apr 15 17:00:02 2014 +0200
Documentation: dt-bindings: reformat and order list of ahci-platform compatibles
The ahci-platform.txt Device Tree binding documentation is gaining a
growing number of compatible strings, and it will gain one more with
the addition of the Marvell Armada 380 AHCI support. It is therefore
time to reformat this list into a proper bullet list, and more
importantly order it alphabetically;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit f5f3cf6f7e49b9529fc00a2c4629fa92cf2755fe
Author: Aristeu Rozanski <aris@redhat.com>
Date: Thu Apr 24 15:33:21 2014 -0400
device_cgroup: fix the comment format for recently added functions
Moving more extensive explanations to the end of the comment.
Cc: Li Zefan <lizefan@huawei.com>
Signed-off-by: Aristeu Rozanski <arozansk@redhat.com>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 15a4c835e4ed3e60dd68727cd1907e3dd89563f4
Author: Tejun Heo <tj@kernel.org>
Date: Sun May 4 15:09:14 2014 -0400
cgroup, memcg: implement css->id and convert css_from_id() to use it
Until now, cgroup->id has been used to identify all the associated
csses and css_from_id() takes cgroup ID and returns the matching css
by looking up the cgroup and then dereferencing the css associated
with it; however, now that the lifetimes of cgroup and css are
separate, this is incorrect and breaks on the unified hierarchy when a
controller is disabled and enabled back again before the previous
instance is released.
This patch adds css->id which is a subsystem-unique ID and converts
css_from_id() to look up by the new css->id instead. memcg is the
only user of css_from_id() and also converted to use css->id instead.
For traditional hierarchies, this shouldn't make any functional
difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jianyu Zhan <nasa4836@gmail.com>
Acked-by: Li Zefan <lizefan@huawei.com>
commit ddfcadab35dda6e5bc23ccf1c3055ecb63a71e49
Author: Tejun Heo <tj@kernel.org>
Date: Sun May 4 15:09:14 2014 -0400
cgroup: update init_css() into init_and_link_css()
init_css() takes the cgroup the new css belongs to as an argument and
initializes the new css's ->cgroup and ->parent pointers but doesn't
acquire the matching reference counts. After the previous patch,
create_css() puts init_css() and reference acquisition right next to
each other. Let's move reference acquistion into init_css() and
rename the function to init_and_link_css(). This makes sense and is
easier to follow. This makes the root csses to hold a reference on
cgrp_dfl_root.cgrp, which is harmless.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit a2bed8209a3afc3b2cf1c28383fb48155c1fea46
Author: Tejun Heo <tj@kernel.org>
Date: Sun May 4 15:09:14 2014 -0400
cgroup: use RCU free in create_css() failure path
Currently, when create_css() fails in the middle, the half-initialized
css is freed by invoking cgroup_subsys->css_free() directly. This
patch updates the function so that it invokes RCU free path instead.
As the RCU free path puts the parent css and owning cgroup, their
references are now acquired right after a new css is successfully
allocated.
This doesn't make any visible difference now but is to enable
implementing css->id and RCU protected lookup by such IDs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 6fa4918d03c39351aef3573ac3e7958d6a5ad9b6
Author: Tejun Heo <tj@kernel.org>
Date: Sun May 4 15:09:13 2014 -0400
cgroup: protect cgroup_root->cgroup_idr with a spinlock
Currently, cgroup_root->cgroup_idr is protected by cgroup_mutex, which
ends up requiring cgroup_put() to be invoked under sleepable context.
This is okay for now but is an unusual requirement and we'll soon add
css->id which will have the same problem but won't be able to simply
grab cgroup_mutex as removal will have to happen from css_release()
which can't sleep.
Introduce cgroup_idr_lock and idr_alloc/replace/remove() wrappers
which protects the idr operations with the lock and use them for
cgroup_root->cgroup_idr. cgroup_put() no longer needs to grab
cgroup_mutex and css_from_id() is updated to always require RCU read
lock instead of either RCU read lock or cgroup_mutex, which doesn't
affect the existing users.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 7d699ddb2b181a2c76e5ea18b1bdf102c4bebe4b
Author: Tejun Heo <tj@kernel.org>
Date: Sun May 4 15:09:13 2014 -0400
cgroup, memcg: allocate cgroup ID from 1
Currently, cgroup->id is allocated from 0, which is always assigned to
the root cgroup; unfortunately, memcg wants to use ID 0 to indicate
invalid IDs and ends up incrementing all IDs by one.
It's reasonable to reserve 0 for special purposes. This patch updates
cgroup core so that ID 0 is not used and the root cgroups get ID 1.
The ID incrementing is removed form memcg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 69dfa00ccb72a37f3810687ca110e5a8154c6eed
Author: Tejun Heo <tj@kernel.org>
Date: Sun May 4 15:09:13 2014 -0400
cgroup: make flags and subsys_masks unsigned int
There's no reason to use atomic bitops for cgroup_subsys_state->flags,
cgroup_root->flags and various subsys_masks. This patch updates those
to use bitwise and/or operations instead and converts them form
unsigned long to unsigned int.
This makes the fields occupy (marginally) smaller space and makes it
clear that they don't require atomicity.
This patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit e783c51cce94521c10e599e991acdcfd9a996c4a
Author: Shawn Guo <shawn.guo@freescale.com>
Date: Sun May 4 21:48:06 2014 +0800
ahci: imx: software workaround for phy reset issue in resume
When suspending imx6q systems which have rootfs on SATA, the following
error will likely be seen in resume. The SATA link will fail to come
up, and it results in an unusable system across the suspend/resume
cycle.
$ echo mem > /sys/power/state
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
PM: Entering mem sleep
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 61.914 msecs
PM: suspend devices took 0.070 seconds
PM: late suspend of devices complete after 4.906 msecs
PM: noirq suspend of devices complete after 4.521 msecs
Disabling non-boot CPUs ...
CPU1: shutdown
CPU2: shutdown
CPU3: shutdown
Enabling non-boot CPUs ...
CPU1: Booted secondary processor
CPU1 is up
CPU2: Booted secondary processor
CPU2 is up
CPU3: Booted secondary processor
CPU3 is up
PM: noirq resume of devices complete after 10.486 msecs
PM: early resume of devices complete after 4.679 msecs
sd 0:0:0:0: [sda] Starting disk
PM: resume of devices complete after 22.674 msecs
PM: resume devices took 0.030 seconds
PM: Finishing wakeup.
Restarting tasks ... done.
$ ata1: SATA link down (SStatus 1 SControl 300)
ata1: SATA link down (SStatus 1 SControl 300)
ata1: limiting SATA link speed to 1.5 Gbps
ata1: SATA link down (SStatus 1 SControl 310)
ata1.00: disabled
ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4
ata1: irq_stat 0x00000040, connection status changed
ata1: SError: { CommWake DevExch }
ata1: hard resetting link
sd 0:0:0:0: rejecting I/O to offline device
sd 0:0:0:0: killing request
sd 0:0:0:0: rejecting I/O to offline device
Aborting journal on device sda2-8.
sd 0:0:0:0: rejecting I/O to offline device
EXT4-fs warning (device sda2): ext4_end_bio:317: I/O error writing to inode 132577 (offset 0 size 0 starting block 26235)
Buffer I/O error on device sda2, logical block 10169
...
It's caused by a silicon issue that SATA phy does not get reset by
controller when coming back from LPM. The patch adds a software
workaround for this issue. It enforces a software reset on SATA phy
in imx_sata_enable() function, so that we can ensure SATA link will
come up properly in both power-on and resume.
The software reset is implemented by writing phy reset register through
the phy control register bus interface. Functions
imx_phy_reg_[addressing|write|read]() implement this bus interface, while
imx_sata_phy_reset() performs the actually reset operation.
Signed-off-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 24a9ad5b82929cdeaff70018d82263de0c34c45d
Author: Shawn Guo <shawn.guo@freescale.com>
Date: Sun May 4 21:48:05 2014 +0800
ahci: imx: add namespace for register enums
Update register enums a little bit to add proper namespace prefix, and
have the names match i.MX reference manual.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 8612b4b4f964b935029c3388c8484a66e41bf71e
Author: Paul Bolle <pebolle@tiscali.nl>
Date: Sun May 4 13:50:29 2014 +0200
libata-sff: remove dead code
Ever since v2.6.19 the code contains a check for CONFIG_NO_ATA_LEGACY.
But that macro has never been defined. Apparently no one ran into
problems on platforms that do not support compatibility mode. So remove
this code that has been dead for over seven years.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 84d93b5e605324679cffb6d28c7339dd18165fd4
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Sep 20 22:42:22 2013 +0200
HSI: hsi-char: fix driver for multiport scenarios
Fix return code check of alloc_chrdev_region, which
returns 0 on success.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
commit 56459ea9aada1ba228cd0dd75accb56b95e07d73
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Mar 28 19:57:59 2014 +0100
MAINTAINERS: update HSI entry
Add git tree for hsi subsystem, update Sebastian Reichel's e-mail
address and add Documentation/hsi.txt as maintained file.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
commit 3a8ab8af08cad8d3cf1ceff7e5a5da365ac6b63e
Author: Sebastian Reichel <sre@kernel.org>
Date: Sat Mar 1 01:07:54 2014 +0100
Documentation: HSI: Add some general description for the HSI subsystem
Add a document, which gives a rough introduction about what HSI
is and how its handled by the Linux kernel.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
commit 16ce8a30e6102d7aabd4e4518d255f330290fa3f
Author: David S. Miller <davem@davemloft.net>
Date: Sat May 3 22:25:33 2014 -0700
sparc64: Normalize NMI watchdog logging and behavior.
Bring this code in line with the perf based generic NMI watchdog
in kernel/watchdog.c (which we should convert over to at some
point).
In particular, don't do anything super fancy when the watchdog
triggers, and specifically don't do a do_exit() which only makes
things worse.
Either panic(), or WARN(). The latter of which will do all of
the actions such as give us a stack backtrace.
Signed-off-by: David S. Miller <davem@davemloft.net>
commit caec4ba8ff360f094e5a80e938ba0946bbe6b5f5
Author: Fabian Frederick <fabf@skynet.be>
Date: Sat May 3 22:28:43 2014 +0200
fs/locks.c: replace seq_printf by seq_puts
Replace seq_printf where possible
Cc: Jeff Layton <jlayton@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jeff Layton <jlayton@poochiereds.net>
commit 09c3fbba88b444f5e46702cc90fd014d2df7b36d
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:32 2014 +0530
staging: rtl8188eu: Remove 'u8 *pbuf' from struct recv_buf
Instead of using pbuf to pass sbk data pointer to usb_fill_bulk_urb(),
we can use precvbuf->pskb->data to do that.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acfd19e70701dd1ba49653193eab88e379572e92
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:31 2014 +0530
staging: rtl8188eu: Remove rtl8188eu_init_recvbuf() function
rtl8188eu_init_recvbuf() function definition is empty now,
so remove it.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1f3b3fdba2ab124c1e8c2b6aa17cfcf5c99d756
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:30 2014 +0530
staging: rtl8188eu: Remove 'u32 ref_cnt' from struct recv_buf
Driver isn't making any use of value stored in variable ref_cnt.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74e250e479cb79b0cd58a810ed1a6f630877b4ad
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:29 2014 +0530
staging: rtl8188eu: Remove 'u32 len' from struct recv_buf
Remove unused variable 'u32 len'.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b2a4fc7a55415a7afc5baa21986dbd25345e782
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:28 2014 +0530
staging: rtl8188eu: Remove 'alloc_sz' from struct recv_buf
Driver isn't making any use of value stored in alloc_sz variable.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0f4499d703d73c8c9dac77e3fff9cd71c04db9a
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:27 2014 +0530
staging: rtl8188eu: Remove 'pallocated_buf' from struct recv_buf
pallocated_buf is not being used by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e205cae24d0845b39502dafc3c3abe4b265035d3
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:26 2014 +0530
staging: rtl8188eu: Remove 'irp_pending' from struct recv_buf
irp_pending is initialized to false inside rtw_os_recvbuf_resource_alloc()
and value of irq_pending never changed after that, so 'if (!precvbuf->irp_pending)'
inside rtw_os_read_port() function will be always true.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c11f3fff320540e7d84a3bbb2d7d3918465589b5
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:25 2014 +0530
staging: rtl8188eu: Remove pdata, phead, ptail and pend from struct recv_buf
Driver is not making use of value stored in removed variables.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afdd36ef9cb0392a701ee8940d1d9f7e01735643
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:24 2014 +0530
staging: rtl8188eu: Remove 'int transfer_len' from struct recv_buf
Driver is not making any use of value stored in this variable.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 498562560a351cd483bc5d6013a6a33c70e15043
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:23 2014 +0530
staging: rtl8188eu: Remove 'dma_addr_t dma_transfer_addr' from struct recv_buf
Remove unused variable dma_transfer_addr.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4337ff2f8fed9230af7acb447f8c1e5a82087d97
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:22 2014 +0530
staging: rtl8188eu: Remove 'spinlock_t recvbuf_lock' from struct recv_buf
recvbuf_lock is initialized inside rtl8188eu_init_recv_priv() but never used.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a4429ea62834d4e5e4e677b11b64a881da99b99
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:21 2014 +0530
staging: rtl8188eu: Remove 'struct list_head list' from struct recv_buf
Users of 'struct list_head list' variable e.g. rtw_enqueue_recvbuf(),
rtw_enqueue_recvbuf_to_head() and rtw_dequeue_recvbuf() are
already removed.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fe2f910f44a49856245a79b7e4d711d4d9ce670
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:20 2014 +0530
staging: rtl8188eu: Remove function rtw_enqueue_recvbuf()
rtw_enqueue_recvbuf() is not being used by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0521a2a6f9bceca23b38a8cad76ffa0e381600e2
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:19 2014 +0530
staging: rtl8188eu: Remove function rtw_enqueue_recvbuf_to_head()
rtw_enqueue_recvbuf_to_head() is not being used by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d27ab0b9df6c2961da5d814e5f183318a1489c9c
Author: navin patidar <navin.patidar@gmail.com>
Date: Sat May 3 17:15:18 2014 +0530
staging: rtl8188eu: Remove function rtw_dequeue_recvbuf()
rtw_dequeue_recvbuf() is not being used by driver.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9fb433072ebeffe9ae30c819f8032e8583d16fe
Author: Jan Moskyto Matejka <mq@suse.cz>
Date: Wed Apr 30 15:22:17 2014 +0200
rtl8821ae: fixed defined-not-used warning
by cleaning up BT_AUTO_REPORT_ONLY_8192E_2ANT
(always set to 0, never used as constant)
halbtc8192e2ant_iswifi_status_changed was called only from the unused code
Signed-off-by: Jan Moskyto Matejka <mq@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2930d0b977e6b9f66e8f090c685a18991944fca6
Author: Rui Miguel Silva <rmfrfs@gmail.com>
Date: Mon Apr 28 12:12:54 2014 +0100
staging: rtl8192u: fix checkpatch braces warning
fix some code style related to the use of braces in a one statement block
Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7626e3d0d4731ccd3f556533b93c4cd3e8cbf5e6
Author: Dominique van den Broeck <domdevlin@free.fr>
Date: Sun Apr 27 19:11:15 2014 +0200
staging/rtl8192e: Erroneous return codes (types and values)
This function returns a bool, that is supposed to be false when something
goes wrong. It's assumed this way by its lone calling function (which is
SetRFPowerState8190(), line 1445 of rtl8192e/rtl8192e/r8192E_phy.c)
Despite of this, this procedure returns non-null enumerations values or
negative codes instead. This patch fixes this.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73fbfbfecbeb7c8642dd96a12ef991881492f051
Author: navin patidar <navin.patidar@gmail.com>
Date: Tue Apr 29 06:55:13 2014 +0530
staging: rtl8188eu: Use USB subsystem functions to check endpoint type
Use inline functions provided by USB subsystem to check endpoint type,
instead of inline functions implemented by driver to do the same.
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 213351448f9dc5f43f155cb23ab9fafe8a9577ed
Author: navin patidar <navin.patidar@gmail.com>
Date: Tue Apr 29 06:55:12 2014 +0530
staging: rtl8188eu: Remove debugging messages from usb_dvobj_init()
Unnecessary debugging messages are removed from usb_dvobj_init().
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f888cb7b1722412170728df2c9168d47596459c
Author: Thomas Vegas <thomas_75@safe-mail.net>
Date: Tue Apr 1 18:29:37 2014 +0200
staging: serqt_usb2: Clean up initializations of variables
Use a more common kernel coding style.
Signed-off-by: Thomas Vegas <thomas_75@safe-mail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5a7856ec94ce0c1aeeac841d3fa05853f5f53fb
Author: Thomas Vegas <thomas_75@safe-mail.net>
Date: Tue Apr 1 18:28:33 2014 +0200
staging: serqt_usb2: Add blank line after declaration
Use a more common kernel coding style.
Signed-off-by: Thomas Vegas <thomas_75@safe-mail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c46e961e5ad19d5595dfe07d77c26eced8093ec9
Author: Thomas Vegas <thomas_75@safe-mail.net>
Date: Tue Apr 1 18:27:34 2014 +0200
staging: serqt_usb2: Remove useless variable
Use a more common kernel coding style.
Signed-off-by: Thomas Vegas <thomas_75@safe-mail.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 482f0a21904583923d5c37f84586839c026a734b
Author: Ian Abbott <abbotti@mev.co.uk>
Date: Fri May 2 13:50:14 2014 +0100
staging: comedi: remove async parameter from resize_async_buffer()
The `struct comedi_async *async` parameter of `resize_async_buffer()` is
redundant as its value can be easily derived from the `struct
comedi_subdevice *s` parameter as `s->async`. Remove the parameter.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ce016d0986ae618e0686489ad7b858fa13b885d
Author: Ian Abbott <abbotti@mev.co.uk>
Date: Fri May 2 13:50:13 2014 +0100
staging: comedi: remove redundant pointer dereference in comedi_poll()
`s->async->subdevice` in `comedi_poll()` points to the same `struct
comedi_subdevice` as `s`, so the double pointer reference is redundant.
Just use `s`.
(`s->async->subdevice` is initialized by
`__comedi_device_postconfig_async()` in
"drivers/staging/comedi/drivers.c" and doesn't change.)
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e2954e801d7d93fe6f54eff988ddf25836fee0a
Author: Ian Abbott <abbotti@mev.co.uk>
Date: Thu May 1 17:38:24 2014 +0100
staging: comedi: amplc_dio200_common: correct bound on counter mode
For the mode configured by the `INSN_CONFIG_SET_COUNTER_MODE` comedi
instruction for the counter subdevice channels supported by this module,
the upper bound should be `I8254_MODE5 | I8254_BCD` ((5 << 1) | 1)
rather than `I8254_MODE5 | I8254_BINARY` ((5 << 1) | 0). Fix it.
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d52477ef5e66a43fe54e5737179e4e670db260d
Author: Ian Abbott <abbotti@mev.co.uk>
Date: Thu May 1 17:38:23 2014 +0100
staging: comedi: drivers: correct mode check for i8254_set_mode()
The upper bound check on the `mode` parameter of `i8254_set_mode()` and
`i8254_mm_set_mode()` is incorrect. The `mode` parameter value consists
of a mode number in the range 0 to 5 in bits 3..1 {represented by the
constants `I8254_MODE0` (0 << 1) through to `I8254_MODE5` (2 << 1)} ORed
with a BCD/binary flag in bit 0 {represented by the constants
`I8254_BINARY` (0) and `I8254_BCD` (1)}. The maximum allowed value
ought to be `I8254_MODE5 | I8254_BCD` ((5 << 1) | 1), but is currently
`I8254_MODE5 | I8254_BINARY` ((5 << 1) | 0). Fix it.
None of the comedi drivers use `I8254_BCD` but some of the low-level
drivers allow user-space to configure the counter mode, so all legal
values ought to be allowed. However, it's pretty unlikely anyone would
want to set the counters to count in BCD (binary coded decimal) so the
bug is not that significant.
Reported-by: Hartley Sweeten <HartleyS@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1f6c2afed3f4c96194f131373b1e914b285c76b
Author: Luca Ellero <luca.ellero@brickedbrain.com>
Date: Wed Apr 30 11:22:07 2014 +0200
staging: comedi: fix checkpatch warnings
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8383b8c4a9b81ad5fa446a9b4c9bd5ac4b382c2a
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:59 2014 -0700
staging: comedi: das16: clarify 8254 timer programming
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bef74ba884be09144f13b7132c060c2e5b0ec415
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:58 2014 -0700
staging: comedi: das16m1: clarify 8254 timer programming
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22e09dff089fe93d6e3ef7cc0fb8f645a87153c6
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:57 2014 -0700
staging: comedi: ni_at_a2150: clarify 8254 timer programming
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e74e98993da8dff62190c937d4371eda962e64b9
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:56 2014 -0700
staging: comedi: ni_labpc: fix 8254 timer programming
As pointed out by Ian Abbott, the i8254_load() function does not
use the I8254_MODE* values to specify the "mode".
The labpc_counter_load() function in this driver is passed an
I8254_MODE* value so we need to use the i8254_set_mode() and
i8254_write() helpers instead of i8254_load() to program the
timers.
The calls to labpc_counter_load() will not fail so change the
return to void and remove all the unnecessary error handling.
Similarly, change the return type of labpc_counter_set_mode() to
void and remove the unnecessary error handling.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52c9e62cf3247cb0599197e7a27356e6a2513a80
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:55 2014 -0700
staging: comedi: das800: clarify 8254 timer programming
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
The das800_set_frequency() function will not fail. For aesthetics
change the return to a void and remove the error handling.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90c32ce300fb79f45d55803bc021c4e49ed9b85f
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:54 2014 -0700
staging: comedi: amplc_pci244: clarify 8254 timer programming
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e72f7ad46e73b5cd372cdf6834d0dd0e0000d7ad
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:53 2014 -0700
staging: comedi: me4000: fix 8254 timer programming
As pointed out by Ian Abbott, the i8254_load() function does not
use the I8254_MODE* values to specify the "mode".
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
Also, use the CR_CHAN() macro to make sure the only the channel is
used in the insh->chanspec to specify the counter number.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f161fc756a086f56b200a5a9e7ef60c28265a4c
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:52 2014 -0700
staging: comedi: ni_at_ao: fix 8254 timer programming
As pointed out by Ian Abbott, the i8254_load() function does not
use the I8254_MODE* values to specify the "mode".
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7c0dcb65abda2842a1bff678a5297ed68431421
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:51 2014 -0700
staging: comedi: pcl711: fix 8254 timer programming
As pointed out by Ian Abbott, the i8254_load() function does not
use the I8254_MODE* values to specify the "mode".
Refactor the 8254 timer programming to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows
us to use the I8254_MODE* defines to clarify the code.
For aesthetics, factor the timer programming out as a separate
function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 241f1c96441f7539459f159a099115a6d21e9f3e
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:50 2014 -0700
staging: comedi: hwdrv_apci3120: remove clearing of 'b_OutputMemoryStatus'
This private data member is not used by this driver. Remove the unnecessary
clearing of it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 204563198e729cb9c12131a77a1bfdeaacd2a497
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:49 2014 -0700
staging: comedi: hwdrv_apci3120: fix 'b_AiCyclicAcquisition' usage
This private data member is set when an analog input async command is
started by apci3120_cyclic_ai() and cleared when the command finishes
or is canceled.
Rename the CamelCase member to 'ai_running' and convert it to a
bit-field flag.
Remove the unnecessary clearing of the flag before or after calling
apci3120_cancel().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a19f71615875b207813fee32db983903a0ec5729
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:48 2014 -0700
staging: comedi: hwdrv_apci3120: cmd->convert_src is always TRIG_TIMER
The (*do_cmdtest) validates that the cmd->convert_src can only be
TRIG_TIMER. Remove the unnecessay checks.
THis also simplifies the (*do_cmd) a bit since "mode 3" (whatever that
is) is never a valid mode.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f673c5d10511e790de97ab885878cbad1678245
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:47 2014 -0700
staging: comedi: addi_common.h: remove 'b_AiContinuous' from private data
This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Fix the b_AiContinuous check in apci3120_ai_cmd(). The (*do_cmdtest) validates
that the cmd->stop_arg os >= 1 for TRIG_COUNT and 0 for TRIG_NONE. The correct
test to set this flag is (cmd->stop_src == TRIG_NONE).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaca0032f1b5be78b0e8fe55934fd8db5d95d2d1
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:46 2014 -0700
staging: comedi: addi_common.h: remove 'ui_AiNbrofScans' from private data
This member of the private data is a copy of the cmd->stop_arg. Use that
instead.
Fix the b_AiContinuous check in apci3120_ai_cmd(). The (*do_cmdtest) validates
that the cmd->stop_arg os >= 1 for TRIG_COUNT and 0 for TRIG_NONE. The correct
test to set this flag is (cmd->stop_src == TRIG_NONE).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d6babe36ef3f2cc8cd3a2cef2fdb8bf4c144ed4
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:45 2014 -0700
staging: comedi: addi_common.h: remove 'ui_AiDataLength' from private data
This member of the private data is a copy of the s->async->prealloc_bufsz.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1b986e88976e2ca566fa2726c2346b5fbd1903c
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:44 2014 -0700
staging: comedi: addi_common.h: remove 'ui_AiTimer1' from private data
This member of the private data is a copy of the cmd->scan_begin_arg.
Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 596c5a6e76eb1e24e049d85795050fd0ad20b947
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:43 2014 -0700
staging: comedi: addi_common.h: remove 'ui_AiTimer0' from private data
This member of the private data is a copy of the cmd->convert_arg. Use
that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bda88cd47559348d747dcf4741c6067e1348fa3c
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:42 2014 -0700
staging: comedi: addi_common.h: remove 'pui_AiChannelList' from private data
This member of the private data is a copy of the cmd->chanlist. Use that
instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72af0c4ed598419b908f12307cdac7151f622209
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:41 2014 -0700
staging: comedi: addi_common.h: remove 'ui_AiScanLength' from private data
This member of the private data is a copy of the cmd->scan_end_arg. Use that
instead.
Use a local variable in apci3120_cyclic_ai() for the DMA 'scan_bytes', which
is the cmd->scan_end_arg * 2. Replace the open-coded '2' with sizeof(short).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffadead4e67899fd9ca0e33ce1a6bb1453e8b091
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:40 2014 -0700
staging: comedi: addi_common.h: remove 'ui_AiFlags' from private data
This member of the private data is a copy of the cmd->flags. Use that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7586fd6b3e2df042ce2b45cf4ab43a92af1a27ac
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:39 2014 -0700
staging: comedi: amplc_pci230: remove 'ao_continuous' from private data
This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bca4eac8fd36e8ab2990d513a9d6a34d2a5bd502
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:38 2014 -0700
staging: comedi: amplc_pci230: remove 'ai_continuous' from private data
This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96410e7a3316a61ec509865ec76e7d033f8096eb
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:37 2014 -0700
staging: comedi: amplc_pci224: remove 'ai_stop_continuous' from private data
This member of the private data can be determined by checking the cmd->stop_src.
Do that instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56e781203f055e93e2ff510d87a986e2b367c071
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:36 2014 -0700
staging: comedi: addi_apci_2032: tidy up cmd use in apci2032_interrupt()
Use a local variable for the comedi_cmd and tidy up this function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1c51faabc4d974cd118603e237aa5381437e634
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:35 2014 -0700
staging: comedi: adl_pci9111: tidy up (*do_cmdtest) Step 4
This step in the (*do_cmdtest) fixes the comedi_cmd arguments, usually
for TRIG_TIMER sources.
Tidy up this step to clarify the code and remove the extra local
variables. All the arguments are unsigned long so change the 'tmp'
local variable type and rename it for aesthetics.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8412a96127d2866a78dc8d73eeaedac688977f4f
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:34 2014 -0700
staging: comedi: 8253.h: remove the unused i8253_cascade_ns_to_timer_*()
None of the comedi drivers use the i8253_cascade_ns_to_timer_2div_old()
or i8253_cascade_ns_to_timer_power() helpers to calculate the cascaded
divisors. Remove them to avoid any confusion.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d33f88581d2bb06470cb12eb048d70ebdec6fee2
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:33 2014 -0700
staging: comedi: 8253.h: rename i8253_cascade_ns_to_timer_2div()
All of the comedi drivers use the i8253_cascade_ns_to_timer macro
when calculating the divisors for the cascaded timers. This macro
just causes the i8253_cascade_ns_to_timer_2div() inline to be used.
Rename i8253_cascade_ns_to_timer_2div() and remove the macro.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1265c22fc8575e857f0a0573db263b507988f420
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:32 2014 -0700
staging: comedi: das1800: don't calc pacer divisors twice
The analog input async command can use the pacer for the scan_begin_src
or the convert_src. The (*do_cmdtest) calculates the divisors when
validating the cmd argument.
There is no reason to recalc the divisors in the (*do_cmd). Just use the
values from the private data.
For aesthetics, rename the setup_counters() function so it has namespace
associated with the driver. Refactor the function to use the values from
the private data and absorb das1800_set_frequency() to clarify the code.
Refactor the function to use the i8254_set_mode() and i8254_write()
helpers instead of i8254_load(). This allows us to use the I8254_* defines
when setting the mode to clarify the code.
This function will not fail so change the return type to void to simplify
the (*do_cmd) a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66fea98e6251e15d25965ef805786e8e0b1c5ee4
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:31 2014 -0700
staging: comedi: das1800: refactor Step 4 of das1800_ai_do_cmdtest()
Refactor this code to reduce the indent level and the > 80 char
lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 863e07c9f83c9674c0176771c40b56b48657e1e5
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:30 2014 -0700
staging: comedi: das16m1: don't calc pacer divisors twice
The analog input async command can use the pacer for the convert_src. The
(*do_cmdtest) calculates the divisors when validating the cmd argument.
There is no reason to recalc the divisors in the (*do_cmd). Just use the
values from the private data.
Refactor das16m1_set_pacer() to use the i8254_set_mode() and i8254_write()
helpers instead of i8254_load(). This allows us to use the I8254_* defines
when setting the mode to clarify the code.
Tidy up das16m1_cmd_exec() a bit. The pacer only needs to be set when the
convert_src is TRIG_TIMER.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33eafb7761d244a3d41a25b56dd17ba05634907e
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:29 2014 -0700
staging: comedi: cb_pcidas: don't calc ao pacer divisors twice
The analog output async command can use the pacer for the scan_begin_src.
The (*do_cmdtest) calculates the divisors when validating the cmd argument.
There is no reason to recalc the divisors in the (*do_cmd). Just use the
values from the private data.
For aesthetics, factor out the code that loads the counters to match the
analog input. Refactor the code to use the i8254_set_mode() and i8254_write()
helpers instead of i8254_load(). This allows us to use the I8254_* defines
when setting the mode to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f513b63f73e8bebc67a74dd46917788bfdf9c7cd
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 12:59:28 2014 -0700
staging: comedi: cb_pcidas: don't calc ai pacer divisors twice
The analog input async command can use the pacer for the scan_bagin_src
or the convert_src. The (*do_cmdtest) validates that only one of these
sources has the TRIG_TIMER selected and calculates the divisors when
validating the cmd argument.
There is no reason to recalc the divisors in the (*do_cmd). Just use
the values from the private data.
Also, refactor cb_pcidas_load_counters() to use the i8254_set_mode()
and i8254_write() helpers instead of i8254_load(). This allows us to
use the I8254_* defines when setting the mode to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8673804de08f047769d33858ad60a252b241bc76
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:43 2014 -0700
staging: comedi: adv_pci1710: remove 'ai_act_chan' from private data
This member of the private data is not ued by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 576a09f01bea680e46df033634541f33a70640cf
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:42 2014 -0700
staging: comedi: adv_pci1710: remove 'i8254_osc_base' from private data
This member of the private data is always set to I8254_OSC_BASE_10MHZ. Remove
it from the private data and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16c7eb6047bb0261124dfc4b5e63873a9ca5c442
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:41 2014 -0700
staging: comedi: adv_pci1710: always enable PCI171x_PARANOIDCHECK code
This define enables code that checks for analog input channel dropout
when reading samples. The define is enabled so we might as well always
enable the code and remove the define.
Factor out the common channel dropout detect code as a helper function
and cleanup the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2d8c43b4eed79dee4248b040e6d66c447ccac3b
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:40 2014 -0700
staging: comedi: adv_pci1710: rename interrupt helper functions
For aesthetics, rename the helper functions that are called by
the interrupt function to handle reading the analog input samples.
Also, change the parameters to the helpers to the comedi_device
and comedi_subdevice pointers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 925ddefce0e9eec2412d03ceaa40f57323d09fec
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:39 2014 -0700
staging: comedi: adv_pci1710: tidy up start_pacer()
For aesthetics, rename this function so it has namespace associated
with the driver.
Change the parameters to the function. The 'mode' is really a flag to
load the counters and the divisors can be found in the private data.
To clarify the code and remove the magic numbers, use the 8253.h
helpers to set the timer mode and load the counters.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 335733438f703a4a54478360759b75ff1d24ebda
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:38 2014 -0700
staging: comedi: adv_pci1710: remove local var in pci171x_ai_cmd()
The local variable 'mode' is not necessary. We can determine the mode
by checking the cmd->convert_src and cmd->start_src. Do this instead
to clarify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73bcf01cb8c57c699c2a194fef3bad9bd39d6e1a
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:37 2014 -0700
staging: comedi: adv_pci1710: only calc the pacer divisors once
When the cmd->convert_src == TRIG_TIMER the divisors needed to
generate the pacer time are calculated in the (*do_cmdtest) to
validate the cmd->convert_arg. The core always does the (*do_cmdtest)
before the (*do_cmd) so there is no reason to recalc the divisors.
Save the calculated divisors in the private data as 'next_divisor[12]'.
The (*do_cmd) then transfers them to the private data 'divisor[12]' so
that they can be used to set the timer for the command immediately or
later when the cmd->start_src is TRIG_EXT (mode 2 in this driver).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5297a6ba0aba3d8c8238b53525a231a65fced0bf
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:36 2014 -0700
staging: comedi: adv_pci1710: remove 'ai_eos' from private data
This member of the private data is is not necessary. We can just check the
cmd->flags for TRIG_WAKE_EOS when needed. Remvoe the member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17ac5ecf20e77833adbc01dcf82cb74c1e4c6896
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:35 2014 -0700
staging: comedi: adv_pci1710: remove 'ai_buf_ptr' from private data
This member of the private data is set to 0 but never used. Just remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4720286248acb7b696d95c72641c80bced6b3d3
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:34 2014 -0700
staging: comedi: adv_pci1710: remove 'neverending_ai' from private data
This member of the private data is not necessary. We can determine if
the analog input command is neverending by checking the cmd->stop_src:
TRIG_COUNT -> !neverending_ai
TRIG_NONE -> neverending_ai
Do that instead and remove the unnecessary member.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56556577d9c4b4528935ddfc5635953c956d7fc9
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:33 2014 -0700
staging: comedi: adv_pci1710: don't check the chanlist twice
The chanlist is checked in Step 5 of the (*do_cmdtest) there is no
reason to check it again in the (*do_cmd). The only reason its done
again is to get the actual 'seglen', the non-repeating length of the
chanlist.
Save the 'seglen' found by pci171x_ai_check_chanlist() in the private
data and use that in the (*do_cmd). Rename the private data member to
clarify it. Also, remove the unused 'act_chanlist_pos' member from the
private data.
Refactor the error handling in pci171x_ai_check_chanlist() so it returns
and errno for failure and 0 for success.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b5a7a466932e9d6da6221785b34854b1838a7061
Author: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Tue Apr 29 11:08:32 2014 -0700
staging: comedi: adv_pci1710: tidy up pci171x_ai_check_chanlist()
Tidy up this function to clarify what the chanlist is being checked for.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bac39f6c9b00c9cfc3e418ea1d0afcd1c113c2f
Author: Raghavendra Ganiga <ravi23ganiga@gmail.com>
Date: Thu May 1 13:53:12 2014 +0530
staging: comedi: fix coding style issues in comedi_fops.c
This is a patch to fix coding style
warnings found by checkpatch.pl tool
Signed-off-by: Raghavendra Chandra Ganiga <ravi23ganiga@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66d76f19d6aa863ac5b3e38be345daf9b609f226
Author: Chase Southwood <chase.southwood@gmail.com>
Date: Sat May 3 02:49:15 2014 -0500
staging: comedi: addi_apci_1564: remove use of devpriv->s_EeParameters
This driver no longer reads the eeprom to find the board specific data,
all the necessary data is in the boardinfo. Use the boardinfo directly
instead of passing through devpriv->s_EeParameters.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7e04a080831087e1413e5651c0bf59f5dcfa409
Author: Chase Southwood <chase.southwood@gmail.com>
Date: Tue Apr 29 03:37:17 2014 -0500
staging: comedi: addi_apci_1564: remove unnecessary info from boardinfo
The i_IorangeBase1, i_PCIEeprom, and pc_EepromChip data in the boardinfo
was only needed to work out the usage of the PCI bars. Now that that is
squared away, this info is no longer needed and can be removed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 128f798918c398b5ae84e5734c3b5df8c35d5d94
Author: Chase Southwood <chase.southwood@gmail.com>
Date: Wed Apr 30 02:57:59 2014 -0500
staging: comedi: addi_apci_1564: simplify the PCI bar reading and don't read the unused bars
This driver only uses PCI bar 0 (devpriv->i_IobaseAmcc), and PCI bar 1
(dev->iobase), don't bother reading the unused PCI bars.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cffd83b6d1e6e403a77c5babf1443cdfd1a080ef
Author: Chase Southwood <chase.southwood@gmail.com>
Date: Tue Apr 29 03:34:23 2014 -0500
staging: comedi: addi_apci_1564: board has 32 digital inputs
This board always has 32 digital inputs. Remove the test when
initializing the subdevice.
Also, since this board is the only one supported by this driver,
remove the boardinfo about the digital inputs and just use the
data directly in the subdevice init.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa4f14c1febf0f602c5516857303de9cc05d6e6
Author: Chase Southwood <chase.southwood@gmail.com>
Date: Sat Apr 26 20:36:44 2014 -0500
staging: comedi: addi_apci_1564: remove unnecessary include
This include is no longer needed.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae63178637d03bca6b58336ad3e4b3af9e60339
Author: Chase Southwood <chase.southwood@gmail.com>
Date: Sat Apr 26 20:35:58 2014 -0500
staging: comedi: addi_apci_1564: remove eeprom support code
Reading the eeprom on this board is not necessary. All information
required is in the boardinfo.
Remove the eeprom support code which is not really useful here.
Signed-off-by: Chase So…
ddstreet
referenced
this pull request
in ddstreet/linux
May 12, 2014
GIT 1297af7d710acda27fb289277866e0bcd81c72c8
commit 10d4c6736ea6e6ff293dd588551270bca00ca45d
Author: Petri Gynther <pgynther@google.com>
Date: Thu May 8 15:50:01 2014 -0700
Bluetooth: btusb: Add Broadcom patch RAM support
After hardware reset, some BCM Bluetooth adapters obtain their initial firmware
from OTPROM chip. Once this initial firmware is running, the firmware can be
further upgraded over HCI interface with .hcd files provided by Broadcom. This
is also known as "patch RAM" support. This change implements that.
If the .hcd file is not found in /lib/firmware, BCM Bluetooth adapter continues
to operate with the initial firmware. Sample kernel log:
hotplug: sys=firmware act=add fw=brcm/BCM20702A0-0a5c-22be.hcd dev=...
Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-22be.hcd not found
If the .hcd file is found, btusb driver pushes it to the BCM Bluetooth adapter and
it starts using the new firmware. Sample kernel log:
hotplug: sys=firmware act=add fw=brcm/BCM20702A0-0a5c-22be.hcd dev=...
Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=1000 lmp_ver=06 lmp_subver=220e
Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=1389 lmp_ver=06 lmp_subver=220e
Above, we can see that hci_rev goes from 1000 to 1389 as a result of the upgrade.
Signed-off-by: Petri Gynther <pgynther@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 79bc7681c2880e57f07556263b862bbf383ad209
Author: Seungwon Jeon <tgih.jun@samsung.com>
Date: Fri May 9 07:02:33 2014 +0900
ARM: dts: disable MDMA1 node for exynos5420
This change places MDMA1 in disabled node for Exynos5420.
If MDMA1 region is configured with secure mode, it makes
the boot failure with the following on smdk5420 board.
("Unhandled fault: imprecise external abort (0x1406) at 0x00000000")
Thus, arndale-octa board don't need to do the same thing anymore.
Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 88072246315301323b777465f5c9b643db87aff7
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:57:35 2014 +0900
ARM: EXYNOS: Move the driver to drivers/cpuidle directory
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 5695f45e38ec1a861551f7d1cd177b5e81984b83
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:57:30 2014 +0900
ARM: EXYNOS: Cleanup all unneeded headers from cpuidle.c
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 17c643ecf1219cf8d3b375bdfdc377b9cbc372ae
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:56:29 2014 +0900
ARM: EXYNOS: Pass the AFTR callback to the platform_data
No more dependency on the arch code. The platform_data field is used to set the
PM callback as the other cpuidle drivers.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 7e4401689ed8c63cfb3f063107b1a07c58bb5830
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:56:24 2014 +0900
ARM: EXYNOS: Move S5P_CHECK_SLEEP into pm.c
This macro is only used there.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit f75751d7a1ddf0c3ccc71e0a7117a4be823303d1
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:55:12 2014 +0900
ARM: EXYNOS: Move the power sequence call in the cpu_pm notifier
The code to initiate and exit the powerdown sequence is the same in
pm.c and cpuidle.c.
Let's split the common part in the pm.c and reuse it from the cpu_pm notifier.
That is one more step forward to make the cpuidle driver arch indenpendant.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 7ef8dd93099a531fc579648c17125d623e727262
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:53:00 2014 +0900
ARM: EXYNOS: Move the AFTR state function into pm.c
In order to remove depedency on pm code, let's move the 'exynos_enter_aftr'
function into the pm.c file as well as the other helper functions.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 9c63359488c69a2ab5e0077baa747a9a03eeb909
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:52:59 2014 +0900
ARM: EXYNOS: Encapsulate the AFTR code into a function
Let's encapsulate the AFTR state specific call into a single function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit d9679e49311b7138fa1cbcb20f6c8c3675cc6c1f
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:52:59 2014 +0900
ARM: EXYNOS: Disable cpuidle for exynos5440
There is no point to register the cpuidle driver for the 5440 as it has only
one WFI state which is the default idle function when the cpuidle driver is
disabled.
By disabling cpuidle we prevent to enter to the governor computation for
nothing, thus saving a lot of processing time.
The only drawback is the statistic via sysfs on this state which is lost but
it is meaningless and it could be retrieved from the ftrace easily.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 63f3ab27db4312c903bc268ac1f5a20a0a28119c
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:52:59 2014 +0900
ARM: EXYNOS: Encapsulate boot vector code into a function for cpuidle
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit b00ca44f02e46a638a92608f257dceeefea1d54f
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:52:59 2014 +0900
ARM: EXYNOS: Pass wakeup mask parameter to function for cpuidle
Pass the wakeup mask to 'exynos_set_wakeupmask' as this function could
be used for different idle states with different mask.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit ac5369f51081126692fc44ab637ed3c3681ea79a
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:53:26 2014 +0900
ARM: EXYNOS: Remove ifdef for scu_enable in pm
The scu_enable function is already a noop in the scu's header file is
CONFIG_SMP=n, so no need to use these macros in the code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit efb148f681d8376122ff60d5c36aa3592d4c2c0d
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:50:16 2014 +0900
ARM: EXYNOS: Move scu_enable in the cpu_pm notifier
We make the cpuidle code less arch dependent.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 5e5ee768f80860605ec66fe9e4052db82a7166c5
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:27 2014 +0900
ARM: EXYNOS: Use the cpu_pm notifier for pm
Use the cpu_pm_enter/exit notifier to group some pm code inside the
pm file.
The save and restore code is duplicated across pm.c and cpuidle.c. By
using the cpu_pm notifier, we can factor out the routine.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 04d2981f15dc93bd52a2c8431afb1456dae7c8fc
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:27 2014 +0900
ARM: EXYNOS: Fix S5P_WAKEUP_STAT call for cpuidle
This function should be called only when the powerdown sequence fails.
Even if the current code does not hurt, by moving this line, we have
the same code than the one in pm.c.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit ff15bf49dcce85acd4220512dc30523a12e3bb81
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:27 2014 +0900
ARM: EXYNOS: Move some code inside the idle_finisher for cpuidle
Move the code around to differentiate different section of code and
prepare it to be factored out in the next patches.
The call order changed but hat doesn't have a side effect because
they are independent. The important call is cpu_do_idle() which must
be done the last.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit e102ca61840e80ef6e347e81b17b2eff088290e9
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:27 2014 +0900
ARM: EXYNOS: Encapsulate register access inside a function for pm
That makes the code cleaner and encapsulted. The function will be
reused in the next patch.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 905e625e9411841cfc1ede8886f8df6153babd19
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:26 2014 +0900
ARM: EXYNOS: Change function name prefix for cpuidle
The driver was initially written for exynos4 but the driver is used
also for exynos5.
Change the function prefix name exynos4 -> exynos
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit c60cdc63176588a0e715e4da3984a3ea0efc5858
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:26 2014 +0900
ARM: EXYNOS: Use cpuidle_register
Use the cpuidle generic function 'cpuidle_register'. That saves us
from some extra lines of code and unneeded variables.
A side effect of this change is a bug fix where before the cpuidle
driver was registered for each_online_cpu and now it is for
each_possible_cpu.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 59b52960dac2e4d35959a459f5ef2895927e95c1
Author: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Fri May 9 06:43:26 2014 +0900
ARM: EXYNOS: Prevent forward declaration for cpuidle
Move the structure below the 'exynos4_enter_lowpower' function so no
more need of forward declaration.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit cfbad697765dea7eb0478ae4234dd3a35cbb8f16
Author: Amit Daniel Kachhap <amit.daniel@samsung.com>
Date: Fri May 9 06:43:26 2014 +0900
ARM: EXYNOS: Move arm core power down clock to exynos5250 common clock
Now with common clock support added for exynos5250 it is necessary to
move this code to exynos5250 common clock driver as clock registers
should be handled there. This change is tested in exynos5250 based
arndale platform.
Cc: Abhilash Kesavan <a.kesavan@samsung.com>
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsugn.com>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Amit Daniel Kachhap <amit.daniel@samsung.com>
[t.figa: Rebased onto current kernel sources.]
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 9c88669c2cfc91158f157b5584103ff7e5b6bedb
Author: Axel Lin <axel.lin@ingics.com>
Date: Wed Apr 9 17:21:26 2014 +0800
pwm: twl: Really disable twl6030 PWMs
Current twl6030_pwm_disable() implementation writes TWL6030_TOGGLE3_REG
twice, the second write sets TWL6030_PWMXEN bits so the PWM clock does
not disable.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
commit 29a61d83ad2da88bbbadb554b72fdd2c3bb36c63
Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Date: Thu May 8 17:31:01 2014 -0400
ARM: dts: k2l-evm: add AEMIF/NAND device entry
Add AEMIF/NAND device entry.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 81141a027c5d0c49373e4af7d068b0ca5ad6442a
Author: Rahul Sharma <rahul.sharma@samsung.com>
Date: Fri May 9 06:26:44 2014 +0900
ARM: dts: add dts files for exynos5260-xyref5260 board
The patch adds the dts files for xyref5260 board which
is based on exynos5260 SoC.
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit af6cf11c31763c49c8f0a64e4be23fab58bb019e
Author: Rahul Sharma <rahul.sharma@samsung.com>
Date: Fri May 9 06:26:41 2014 +0900
ARM: dts: add dts files for exynos5260 SoC
The patch adds the dts files for exynos5260.
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 95711059c5286b320ca08ebc33966994ac26d5aa
Author: Jens Axboe <axboe@fb.com>
Date: Thu May 8 15:26:30 2014 -0600
blk-mq: cleanup some leftover code from the double tagging scheme
Don't need ->use_bitmap_tags anymore, and we need not print
what kind of tagging type we selected.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 8b144ffd7b6c8edbdc881b0a32858e1447fa441f
Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Date: Thu May 8 17:19:08 2014 -0400
ARM: dts: k2e-evm: add AEMIF/NAND device entry
Add AEMIF/NAND device entry.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 4bfb5edef0cc4387d0760f5eb2d0dcfabc237b95
Author: Kyungmin Park <kyungmin.park@samsung.com>
Date: Fri May 9 06:19:18 2014 +0900
ARM: EXYNOS: Support secondary CPU boot of exynos4212
This patch fix the offset of CPU boot address and change parameter of smc call
of SMC_CMD_CPU1BOOT command for Exynos4212.
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit b10fd728b985ae2d18ce9bf4c2161a6eb002683c
Author: Jens Axboe <axboe@fb.com>
Date: Thu May 8 15:12:07 2014 -0600
mtip32xx: convert to use blk-mq
This rips out timeout handling, requeueing, etc in converting
it to use blk-mq instead.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 437ec65fa3c937b5f8b9c0573f60a327320937e3
Author: Jens Axboe <axboe@fb.com>
Date: Thu May 8 15:05:12 2014 -0600
blk-mq: implement new and more efficient tagging scheme
blk-mq currently uses percpu_ida for tag allocation. But that only
works well if the ratio between tag space and number of CPUs is
sufficiently high. For most devices and systems, that is not the
case. The end result if that we either only utilize the tag space
partially, or we end up attempting to fully exhaust it and run
into lots of lock contention with stealing between CPUs. This is
not optimal.
This new tagging scheme is a hybrid bitmap allocator. It uses
two tricks to both be SMP friendly and allow full exhaustion
of the space:
1) We cache the last allocated (or freed) tag on a per blk-mq
software context basis. This allows us to limit the space
we have to search. The key element here is not caching it
in the shared tag structure, otherwise we end up dirtying
more shared cache lines on each allocate/free operation.
2) The tag space is split into cache line sized groups, and
each context will start off randomly in that space. Even up
to full utilization of the space, this divides the tag users
efficiently into cache line groups, avoiding dirtying the same
one both between allocators and between allocator and freeer.
This scheme shows drastically better behaviour, both on small
tag spaces but on large ones as well. It has been tested extensively
to show better performance for all the cases blk-mq cares about.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 78bb0b8c61ab00fb1c61653464ab6c26e8b47558
Author: Jens Axboe <axboe@fb.com>
Date: Thu May 8 15:03:42 2014 -0600
wait: make prepare_to_wait() return if it added task to wait queue
The caller can make some decisions based on whether or not the
task was already on the waitqueue. blk-mq will use this for
batched wakeups on tag frees.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 3528dd34b2d3dc642669fd12399e18a16e3aacc8
Author: Arun Kumar K <arun.kk@samsung.com>
Date: Fri May 9 06:06:25 2014 +0900
ARM: dts: Add exynos5420 peach-pit board support
Adds the google peach-pit board dts file which uses
exynos5420 SoC.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 8e371a91d98e8d8d032c6032eb0ac6e2bbcb231f
Author: Arun Kumar K <arun.kk@samsung.com>
Date: Fri May 9 06:06:24 2014 +0900
ARM: dts: Add node labels to exynos5420
Adding labels to nodes which do not have it yet in exynos5420.
This is done so as to use reference based node updation in board
files.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit c4539e88e758901c298ee1f6c0e19471be693f54
Author: Arun Kumar K <arun.kk@samsung.com>
Date: Fri May 9 06:06:10 2014 +0900
ARM: dts: Add pwmX_out pinctrl nodes to exynos5420
Adds the PWM nodes to 5420 pinctrl dtsi file.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 4cb378646ef85e76745225912025871f3dc93ca3
Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri May 9 06:01:40 2014 +0900
ARM: dts: Add rear camera nodes for exynos4412-trats2
This patch enables the rear facing camera (s5c73m3) on TRATS2 board
by adding the I2C0 bus controller, s5c73m3 sensor, MIPI CSI-2 receiver
and the sensor's voltage regulator supply nodes.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit ee5eda64af051097c00534db7c5432c4a061d355
Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Fri May 9 06:00:35 2014 +0900
ARM: dts: Update camera nodes for exynos4 and exynos4412-trats2
Remove unused /camera/clock-controller node and add required clock
properties to the camera node. This is required for a clock provider
that will be referenced by image sensor devices.
Also add required clock related changes to s5k6a3 device node and
afvdd regulator supply.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 6af2ba90818f9e9c4b8711e1f896e797c5da151c
Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Fri May 9 05:58:59 2014 +0900
ARM: dts: rename alias for i2c_ak8975 label for exynos4412-trats2
The i2c_ak8975 controller uses label i2c8.
This alias is already used for I2C controller 8 defined
in file arch/arm/boot/dts/exynos4.dtsi.
This patch renames a label for i2c_ak8975 to i2c9.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 9c869d1f07852b47ae8578c14161ec2821682464
Author: Tomasz Stanislawski <t.stanislaws@samsung.com>
Date: Fri May 9 05:55:42 2014 +0900
ARM: dts: add missing pinctrls for I2C of exynos4
This patch adds missing pinctrls for I2C controllers 2-7.
Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit c92ecf94d3156f79825a994e509aa070ceebae88
Author: Christoph Hellwig <hch@lst.de>
Date: Tue May 6 12:12:45 2014 +0200
blk-mq: initialize struct request fields individually
This allows us to avoid a non-atomic memset over ->atomic_flags as well
as killing lots of duplicate initializations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit face4c34519c38eda4020ab9964e5b55fcfbaa4a
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:51:43 2014 +0900
ARM: S3C24XX: remove SAMSUNG_CLOCK remnants after ccf conversion
This finally removes all remaining SAMSUNG_CLOCK conditional code
from s3c24xx architectures.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 8fb211f9c6c32e938ebbc03e6de6300156f911d7
Author: Jens Axboe <axboe@fb.com>
Date: Thu May 8 14:50:19 2014 -0600
blk-mq: update a hotplug comment for grammar
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 597000cf07742cd218d1c16bc7600fa2a6a884cd
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:49:36 2014 +0900
ARM: S3C24XX: remove legacy clock code
With the move to the common clock framework completed for s3c2410, s3c2440
and s3c2442, the legacy clock code for these machines can go away too.
This also includes the legacy dclk code, as all legacy users are converted.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 355c9f77a6d9f41f390bb776b7e561458afbcf39
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:49:29 2014 +0900
ARM: S3C24XX: convert s3c2410 to common clock framework
Convert the machines using the s3c2410 to use the new driver based
on the common clock framework instead of the legacy Samsung clock driver.
As with the s3c244x, machines using the clkout output will need a fixup
from someone with the hardware.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit abe9f29b0471d1e7ff1ef4ae94bcc6b1525e15f9
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:49:19 2014 +0900
ARM: S3C24XX: convert s3c2440 and s3c2442 to common clock framework
Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.
Some of the more esotheric machines will probably need a fixup, as they
do strange things to the clkout outputs, that I did not really understand
nor have the hardware to check.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 1a54e4342c42e01f0117c05d8bb2c9309cc435e8
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:49:14 2014 +0900
ARM: S3C24XX: add platform code for conversion to the common clock framework
This adds the necessary init functions to init the clocks from the common
clock framework and necessary CONFIG_SAMSUNG_CLOCK ifdefs around the legacy
clock code.
This also includes empty stubs for the *_setup_clocks functions that are
called from the cpufreq driver on resume.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 6dc8f9c7783546483d0b86e18e78896c2d31ae86
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:49:10 2014 +0900
clk: samsung: add clock controller driver for s3c2410, s3c2440 and s3c2442
This driver can handle the clock controllers of the socs mentioned above,
as they share a common clock tree with only small differences.
The clock structure is built according to the manuals of the included
SoCs and might include changes in comparison to the previous clock
structure.
As pll-rate-tables only the 12mhz variants are currently included.
The original code was wrongly checking for 169mhz xti values [a 0 to much
at the end], so the original 16mhz pll table would have never been
included and its values are so obscure that I have no possibility to
at least check their sane-ness. When using the formula from the manual
the resulting frequency is near the table value but still slightly off.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 639335c0f488b948c8946f2ba421113544905587
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:49:05 2014 +0900
dt-bindings: add documentation for s3c2410 clock controller
Describe the clock controller of s3c2410, s3c2440 and s3c2442.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 4d4cfe75853f61219b08244748d1d4f9634726db
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:48:57 2014 +0900
ARM: S3C24XX: enable usage of common dclk if common clock framework is enabled
Add platform device and select the correct implementation automatically
depending on wether the old samsung_clock or the common clock framework
is enabled.
This is only done for machines already using the old dclk implementation,
as everybody else should move to use dt anyway.
The machine-specific settings for the external clocks will have to be set
by somebody with knowledge about the specific hardware.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 5799ea12a41286d9588155a1abd828f43bc63d6b
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:48:51 2014 +0900
clk: samsung: add clock driver for external clock outputs
This adds a driver for controlling the external clock outputs of
s3c24xx architectures including the dclk muxes and dividers.
The driver at the moment only supports the legacy non-dt boards using these
clock outputs. The clock-output control itself is part of the system-controller
mainly controlled by the pinctrl drivers. So it should most likely be
integrated there for dt platforms.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit d8b532578f39fdec159105bc415938910351a699
Author: Heiko Stuebner <heiko@sntech.de>
Date: Fri May 9 05:48:44 2014 +0900
ARM: S3C24XX: cpufreq-utils: don't write raw values to MPLLCON when using ccf
The s3c24xx cpufreq driver needs to change the mpll speed and was doing
this by writing raw values from a translation table into the MPLLCON
register.
Change this to use a regular clk_set_rate call when using the common
clock framework and only write the raw value in the samsung_clock case.
The s3c cpufreq driver does already aquire the mpll, so simply add a reference
to struct s3c_cpufreq_config to let set_fvco access it.
While struct clk is opaque the differenciation between samsung clock and
common clock is kept, as the samsung-clock mpll clk does not implement a
real set_rate.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 1eaade629f5c479f5f043c8c24e5daa7029b5e2e
Author: Jens Axboe <axboe@fb.com>
Date: Thu May 8 14:46:27 2014 -0600
blk-mq: track software context online status seperately
By separating it from the system notion of a specific CPU
being online or not, we get away from problems with ordering
of the CPU hotplug notifiers.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 14f3791439b5a6cf12127fb80204265533d92664
Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon Feb 24 17:32:59 2014 +0200
ARM: keystone: Update the dma offset for non-dt platform devices
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 5eb3da7246a5b2dfac9f38a7be62b1a0295584c7
Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Thu Jun 13 19:24:39 2013 -0400
ARM: keystone: Switch over to coherent memory address space
With late code patching updates for LPAE machines has merged now and
memblock conversion from bootmem is on its way, Keystone can switch to
the coherent memory address space which starts beyond 4GB boundary.
The idmap alias needs are managed via virt_to_idmap() for boot purpose.
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 27379350a9cb6f39e136325d33b9cc9357da263e
Author: Brian Norris <computersforpeace@gmail.com>
Date: Thu May 8 15:34:28 2014 -0400
ARM: configs: keystone: add MTD_SPI_NOR (new dependency for M25P80)
This defconfig contains the CONFIG_M25P80 symbol, which is now
dependent on the MTD_SPI_NOR symbol. Add CONFIG_MTD_SPI_NOR to satisfy
the new dependency.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit efdd1946c44e0d5fdf36e03176705260145d122b
Author: Lad Prabhakar <prabhakar.csengg@gmail.com>
Date: Thu May 8 15:32:46 2014 -0400
ARM: configs: keystone: drop CONFIG_COMMON_CLK_DEBUG
this patch removes COMMON_CLK_DEBUG config option
from defconfig file as this config option is obsolete.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 86156978a398dfc92294653c49c9374aaa6e5316
Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
Date: Mon Feb 24 16:42:19 2014 -0500
ARM: dts: keystone: Update USB node for dma properties
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 4d46596d789d86441eeb1f02bb6d9ea10215fa5d
Author: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Wed Feb 12 19:20:16 2014 +0200
ARM: dts: keystone: Use dma-ranges property
The dma-ranges property has to be specified per bus and has format:
< DMA addr > - Base DMA address for Bus (Bus format 32-bits)
< CPU addr > - Corresponding base CPU address (CPU format 64-bits)
< DMA range size > - Size of supported DMA range
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 509046a7b00cf540e49d3072b1efe7cb0b1bdc20
Author: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Mon Apr 28 15:20:22 2014 +0300
ARM: dts: keystone: add cell's information to spi nodes
SPI nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding any child
nodes to the SPI bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/spi@21000400/n25q128a11@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/spi@21000400/n25q128a11@0
Hence, ensure that all SPIx nodes have #address-cells and #size-cells
properties defined.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit e42d8a7f966b7b3b817adece0573d07754a647d2
Author: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Tue Apr 8 14:46:07 2014 +0300
ARM: dts: keystone: move i2c0 device node from SoC to board files
I2C devices are not the part of Keystone SoC and have to be
defined in board DTS files.
Hence, move i2c0 EEPROM device node from Keystone SoC to
k2hk, k2e, k2l EVM files as they all have similar EEPROM SoCs
installed.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 3953505afbb80bfcf0e9dc2ba7199e63b0fef69f
Author: Grygorii Strashko <grygorii.strashko@ti.com>
Date: Tue Apr 8 14:46:06 2014 +0300
ARM: dts: keystone: add cell's information to i2c nodes
I2C nodes should always have #address-cells and #size-cells defined,
otherwise warnings will be produced in case of adding child
nodes to the I2C bus in DT:
Warning (avoid_default_addr_size): Relying on default #address-cells value for /soc/i2c@2530800/pca@20
Warning (avoid_default_addr_size): Relying on default #size-cells value for /soc/i2c@2530800/pca@20
Hence, ensure that all i2cX nodes have #address-cells and #size-cells
properties defined.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 5e014d0c020d37af897a0867bc1840f098bf3cee
Author: Lucas Stach <l.stach@pengutronix.de>
Date: Mon Apr 14 16:18:13 2014 +0200
ARM: dts: keystone: drop address and size cells from GIC node
This is likely a copy-and-paste error from the
ARM GIC documentation, that has already been fixed.
address-cells should have been set to 0, as with the size
cells. As having those properties set to 0 is the
same thing as not specifying them, drop them completely.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
commit 9fa1959e976f7a6ae84f616ca669359028070c61
Author: Kinglong Mee <kinglongmee@gmail.com>
Date: Tue Apr 8 13:06:28 2014 +0800
NFSD: Get rid of empty function nfs4_state_init
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit f3e41ec5ef0f5d2e10b6bfd3a13dc29f6d260d79
Author: Kinglong Mee <kinglongmee@gmail.com>
Date: Tue Apr 8 13:04:01 2014 +0800
NFSD: Use simple_read_from_buffer for coping data to userspace
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit ecca063b31b88d31ee79e9d958ea78023659554e
Author: Kinglong Mee <kinglongmee@gmail.com>
Date: Tue Apr 15 17:13:56 2014 +0800
SUNRPC: Fix printk that is not only for nfsd
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit c5c0903b2cda930c76d296419d290137294779f2
Author: Borislav Petkov <bp@suse.de>
Date: Thu May 8 20:37:07 2014 +0200
EDAC, MCE, AMD: Remove leftover unused mask
295d8cda2689 ("EDAC, MCE, AMD: Drop local coreid reporting") removed the
code snippet which used that mask but forgot to drop the mask itself. Do
that now.
Signed-off-by: Borislav Petkov <bp@suse.de>
commit 0cac6fc3eb5218fe40d1c2910abc643ab21d9f19
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 14:27:52 2014 +0530
ASoC: Intel: rename pcm dias to media dai
this is for further updates to driver which supports DPCM :)
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 6f46c0d33e76db2c820c47e9af61e0e3dba10a68
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 14:27:51 2014 +0530
ASoC: Intel: remove unused sst-mfld platform dais
With DPCM we have media dai used and no seperate headset and speaker dai so
remove the speaker dai
The vibra is no longer supported thru audio, so remove
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 4b68b4e1c564f32e4eb18186749b29c9a78772f4
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 14:27:50 2014 +0530
ASoC: Intel: split the pcm and compress to different files
For manging them and adding support for more platforms
Code move only
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 4496ffab7dade2206f3d5dea86b9928a5f173de2
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 14:27:49 2014 +0530
ASoC: Intel: mark sst_set_stream_status as non static
as this will be used in compressed split file in subsequent patch
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit e11fd7c3ac49e2294f9562b6329ca50923e56fa7
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 14:27:48 2014 +0530
ASoc: Intel: rename sst-mfld-platform.c
to sst-mfld-platform-pcm.c so that we can split pcm and compress to different
files for upcoming changes to support more platforms
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 300f53bf199f660bea3ed7afe9fd938064f19c15
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 14:27:47 2014 +0530
ASoC: Intel: remove FSF snail mail address
As this address can move
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 2b4c78df056a7231635cf629380486a074daf56b
Author: Vinod Koul <vinod.koul@intel.com>
Date: Mon May 5 22:19:25 2014 +0530
ASoC: Intel: move component registration blob
to the place near it is used
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 555f8a80c397b1a6ffccb294525df6ca2d721585
Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Date: Mon May 5 17:31:37 2014 +0100
ASoC: Intel: Add support to unload/reload firmware modules.
Add some SST API calls to unload and reload firmware modules. This can be used
by PM code to restore state and also allow modular FW to unload and release
memory blocks.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 6f1c9c57b4e0783acca9c0fe53850f24d30785a3
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Thu May 8 17:17:38 2014 +0100
regulator: arizona-micsupp: Add missing #include
of.h is presently being included through asm-generic/gpio.h so will not
be included on some architectures, causing implicit declaration errors
for of_get_child_by_name, of_parse_phandle and of_node_put.
This patch adds the direct include that should be there.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 9f0affcf3e21fc56d8bce625bb3d5800b7a7d284
Author: Vincent Stehlé <vincent.stehle@laposte.net>
Date: Tue May 6 22:23:02 2014 +0200
ARM: mvebu: Fix pmsu compilation when ARMv6 is selected
When compiling for multiplatform for both ARMv6 and ARMv7, the default compiler
flags are for ARMv6, and we will get:
/tmp/ccwDEzd0.s: Assembler messages:
/tmp/ccwDEzd0.s:639: Error: selected processor does not support ARM mode `isb '
/tmp/ccwDEzd0.s:645: Error: selected processor does not support ARM mode `isb '
/tmp/ccwDEzd0.s:646: Error: selected processor does not support ARM mode `dsb '
/tmp/ccwDEzd0.s:695: Error: selected processor does not support ARM mode `isb '
make[1]: *** [arch/arm/mach-mvebu/pmsu.o] Error 1
Fix this in a similar manner than done previously in commit
72533b77d30c2be02672e26b5dde1263d7b4c2be, by specifying ARMv7 flags for pmsu.o.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Link: https://lkml.kernel.org/r/1399407782-29091-1-git-send-email-vincent.stehle@laposte.net
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 5409e46f1bcf960c651f3fff35f2f25e539655cf
Author: Christoph Hellwig <hch@lst.de>
Date: Wed May 7 13:49:44 2014 +0200
nfsd: clean up fh_auth usage
Use fh_fsid when reffering to the fsid part of the filehandle. The
variable length auth field envisioned in nfsfh wasn't ever implemented.
Also clean up some lose ends around this and document the file handle
format better.
Btw, why do we even export nfsfh.h to userspace? The file handle very
much is kernel private, and nothing in nfs-utils include the header
either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit ecc7455d8eb1860f5aa6b9ad82a9a81f93eb11d1
Author: Kinglong Mee <kinglongmee@gmail.com>
Date: Wed May 7 23:08:04 2014 +0800
NFSD: cleanup unneeded including linux/export.h
commit 4ac7249ea5a0ceef9f8269f63f33cc873c3fac61 have remove all EXPORT_SYMBOL,
linux/export.h is not needed, just clean it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit aa07c713ecfc0522916f3cd57ac628ea6127c0ec
Author: Kinglong Mee <kinglongmee@gmail.com>
Date: Fri Apr 18 20:49:04 2014 +0800
NFSD: Call ->set_acl with a NULL ACL structure if no entries
After setting ACL for directory, I got two problems that caused
by the cached zero-length default posix acl.
This patch make sure nfsd4_set_nfs4_acl calls ->set_acl
with a NULL ACL structure if there are no entries.
Thanks for Christoph Hellwig's advice.
First problem:
............ hang ...........
Second problem:
[ 1610.167668] ------------[ cut here ]------------
[ 1610.168320] kernel BUG at /root/nfs/linux/fs/nfsd/nfs4acl.c:239!
[ 1610.168320] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 1610.168320] Modules linked in: nfsv4(OE) nfs(OE) nfsd(OE)
rpcsec_gss_krb5 fscache ip6t_rpfilter ip6t_REJECT cfg80211 xt_conntrack
rfkill ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables
ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6
ip6table_mangle ip6table_security ip6table_raw ip6table_filter
ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4
nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw
auth_rpcgss nfs_acl snd_intel8x0 ppdev lockd snd_ac97_codec ac97_bus
snd_pcm snd_timer e1000 pcspkr parport_pc snd parport serio_raw joydev
i2c_piix4 sunrpc(OE) microcode soundcore i2c_core ata_generic pata_acpi
[last unloaded: nfsd]
[ 1610.168320] CPU: 0 PID: 27397 Comm: nfsd Tainted: G OE
3.15.0-rc1+ #15
[ 1610.168320] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS
VirtualBox 12/01/2006
[ 1610.168320] task: ffff88005ab653d0 ti: ffff88005a944000 task.ti:
ffff88005a944000
[ 1610.168320] RIP: 0010:[<ffffffffa034d5ed>] [<ffffffffa034d5ed>]
_posix_to_nfsv4_one+0x3cd/0x3d0 [nfsd]
[ 1610.168320] RSP: 0018:ffff88005a945b00 EFLAGS: 00010293
[ 1610.168320] RAX: 0000000000000001 RBX: ffff88006700bac0 RCX:
0000000000000000
[ 1610.168320] RDX: 0000000000000000 RSI: ffff880067c83f00 RDI:
ffff880068233300
[ 1610.168320] RBP: ffff88005a945b48 R08: ffffffff81c64830 R09:
0000000000000000
[ 1610.168320] R10: ffff88004ea85be0 R11: 000000000000f475 R12:
ffff880068233300
[ 1610.168320] R13: 0000000000000003 R14: 0000000000000002 R15:
ffff880068233300
[ 1610.168320] FS: 0000000000000000(0000) GS:ffff880077800000(0000)
knlGS:0000000000000000
[ 1610.168320] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1610.168320] CR2: 00007f5bcbd3b0b9 CR3: 0000000001c0f000 CR4:
00000000000006f0
[ 1610.168320] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 1610.168320] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
0000000000000400
[ 1610.168320] Stack:
[ 1610.168320] ffffffff00000000 0000000b67c83500 000000076700bac0
0000000000000000
[ 1610.168320] ffff88006700bac0 ffff880068233300 ffff88005a945c08
0000000000000002
[ 1610.168320] 0000000000000000 ffff88005a945b88 ffffffffa034e2d5
000000065a945b68
[ 1610.168320] Call Trace:
[ 1610.168320] [<ffffffffa034e2d5>] nfsd4_get_nfs4_acl+0x95/0x150 [nfsd]
[ 1610.168320] [<ffffffffa03400d6>] nfsd4_encode_fattr+0x646/0x1e70 [nfsd]
[ 1610.168320] [<ffffffff816a6e6e>] ? kmemleak_alloc+0x4e/0xb0
[ 1610.168320] [<ffffffffa0327962>] ?
nfsd_setuser_and_check_port+0x52/0x80 [nfsd]
[ 1610.168320] [<ffffffff812cd4bb>] ? selinux_cred_prepare+0x1b/0x30
[ 1610.168320] [<ffffffffa0341caa>] nfsd4_encode_getattr+0x5a/0x60 [nfsd]
[ 1610.168320] [<ffffffffa0341e07>] nfsd4_encode_operation+0x67/0x110
[nfsd]
[ 1610.168320] [<ffffffffa033844d>] nfsd4_proc_compound+0x21d/0x810 [nfsd]
[ 1610.168320] [<ffffffffa0324d9b>] nfsd_dispatch+0xbb/0x200 [nfsd]
[ 1610.168320] [<ffffffffa00850cd>] svc_process_common+0x46d/0x6d0 [sunrpc]
[ 1610.168320] [<ffffffffa0085433>] svc_process+0x103/0x170 [sunrpc]
[ 1610.168320] [<ffffffffa032472f>] nfsd+0xbf/0x130 [nfsd]
[ 1610.168320] [<ffffffffa0324670>] ? nfsd_destroy+0x80/0x80 [nfsd]
[ 1610.168320] [<ffffffff810a5202>] kthread+0xd2/0xf0
[ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40
[ 1610.168320] [<ffffffff816c1ebc>] ret_from_fork+0x7c/0xb0
[ 1610.168320] [<ffffffff810a5130>] ? insert_kthread_work+0x40/0x40
[ 1610.168320] Code: 78 02 e9 e7 fc ff ff 31 c0 31 d2 31 c9 66 89 45 ce
41 8b 04 24 66 89 55 d0 66 89 4d d2 48 8d 04 80 49 8d 5c 84 04 e9 37 fd
ff ff <0f> 0b 90 0f 1f 44 00 00 55 8b 56 08 c7 07 00 00 00 00 8b 46 0c
[ 1610.168320] RIP [<ffffffffa034d5ed>] _posix_to_nfsv4_one+0x3cd/0x3d0
[nfsd]
[ 1610.168320] RSP <ffff88005a945b00>
[ 1610.257313] ---[ end trace 838254e3e352285b ]---
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
commit 39438567179536c9f32e85d19586a11aebe1f860
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon May 5 17:05:26 2014 +0200
ARM: mvebu: conditionalize Armada 375 coherency workaround
The Armada 375 coherency workaround only needs to be applied to the Z1
revision of the SoC. The A0 and later revisions have been fixed, and
no longer need this workaround.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-6-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit a58d5af7d992a5e6dd8e55b3e618bd77f0368b57
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon May 5 17:05:25 2014 +0200
ARM: mvebu: conditionalize Armada 375 SMP workaround
The Armada 375 SMP workaround only needs to be applied to the Z1
revision of the SoC. The A0 and later revisions have been fixed, and
no longer need this workaround.
Note that the initialization of the SMP workaround is delayed from
->smp_prepare_cpus() to ->smp_boot_secondary() because when
->smp_prepare_cpus() is called, the early initcalls have not be
called, so the mvebu-soc-id mechanism is not operational. Since the
workaround is anyway not needed before the secondary CPU is started,
we can delay its implementation until the ->smp_boot_secondary() call.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-5-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 5093dcfb422d212ccdd22450bd986a2fb03cfb9f
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon May 5 17:05:24 2014 +0200
ARM: mvebu: add Armada 375 A0 revision definition
Now that we have access to Armada 375 A0 platforms, we can add the
corresponding revision definition in mvebu-soc-id.h.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-4-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 73c3c79137f05de2ffcfec3469e4110e40dd1522
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon May 5 17:05:23 2014 +0200
ARM: mvebu: initialize mvebu-soc-id earlier
Currently, the mvebu-soc-id logic is initialized through a
core_initcall(). However, we will soon need to know the SoC revision
before booting secondary CPUs, because a workaround affects Armada 375
Z1 steppings, but should not be applied on Armada 375 A0 steppings.
Unfortunately, core_initcall() are called way too late compared to the
SMP initialization. Therefore, the mvebu-soc-id initialization is move
to an early_initcall(), which is called before the SMP initialization.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-3-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit c1a01a0360f6744c9c1735e5db7b208df819156e
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon May 5 17:05:22 2014 +0200
ARM: mvebu: fix thermal quirk SoC revision check
In commit 54fe26a900bc528f3df1e4235cb6b9ca5c6d4dc2 ('ARM: mvebu: Add
thermal quirk for the Armada 375 DB board'), a check on the Armada SoC
revision was added to decide whether a quirk for the thermal device
should be applied or not.
However, the quirk implementation has a bug: it assumes
mvebu_get_soc_id() returns true on success, but it returns
0. Therefore, the condition:
if (mvebu_get_soc_id(&dev, &rev) && rev > ARMADA_375_Z1_REV)
is always false (as long as mvebu-soc-id is properly initialized). As
a consequence, the quirk is always applied, even on A0 steppings, for
which the quirk should not be applied.
This was spotted by testing the thermal driver on Armada 375 A0, which
Ezequiel could not do since he does not have access to the A0 revision
of the SoC for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1399302326-6917-2-git-send-email-thomas.petazzoni@free-electrons.com
Fixes: 54fe26a900bc528f3df1e4235cb6b9ca5c6d4dc2 ('ARM: mvebu: Add thermal quirk for the Armada 375 DB board')
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit efdf811d82b8001781087fd9174bb90a9530e578
Author: Andrew Lunn <andrew@lunn.ch>
Date: Sat May 3 20:30:16 2014 +0200
ARM: Kirkwood: t5325: Remove platform device to instantiate audio
Remove platform device instantiating of the audio, which results in
board-t5325.c being removed. A DT node will be added to take its
place.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1399141819-23924-7-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 7745b2512898e23507753513f7b5262ea1458135
Author: Andrew Lunn <andrew@lunn.ch>
Date: Sat May 3 20:30:12 2014 +0200
ARM: Kirkwood: Remove platform driver for codec
Remove the platform driver and platform data for the audio codec.
A DT node will replace it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lkml.kernel.org/r/1399141819-23924-3-git-send-email-andrew@lunn.ch
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 5fd62066d2900b25a4fb3295ad13e3ee31474a51
Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Thu Apr 24 17:23:22 2014 -0300
ARM: mvebu: Add thermal quirk for the Armada 375 DB board
The initial release of the Armada 375 DB board has an Armada 375
Z1 stepping silicon. This commit introduces a quirk that allows
to workaround a series of issues with the thermal sensor in this
stepping, but updating the devicetree:
* Updates the compatible string for the thermal, so the driver
can perform a specific initialization of the sensor.
* Moves the offset of the thermal control register. This quirk
allows to specifiy the correct (A0 stepping) offset in the
devicetree.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1398371004-15807-9-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit e9d3c849a8dc92e1019a6c7ced98f6ac231a2703
Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Thu Apr 24 08:34:36 2014 -0300
ARM: mvebu: Select HAVE_ARM_TWD only if SMP is enabled
HAVE_ARM_TWD depends on SMP, so we should only select it if
SMP is enabled, as the others platforms do.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Link: https://lkml.kernel.org/r/1398339276-5754-1-git-send-email-ezequiel.garcia@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 8eee0f81cdaafb2fc78dcd5087a15c7f428d7751
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Sat Apr 19 18:32:50 2014 +0200
ARM: mvebu: fix the name of the parameter used in mvebu_get_soc_id
The name of the two parameters of mvebu_get_soc_id were inverted. This
patch fix it in order to have a more readable code.
Reported-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397925170-8202-3-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit c42e1ffa269f098133629adf54cabe242596b647
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Sat Apr 19 18:32:49 2014 +0200
ARM: mvebu: remove unnecessary ifdef around l2x0_of_init
l2x0_of_init function is always defined
arch/arm/include/asm/hardware/cache-l2x0.h: in case of
CONFIG_CACHE_L2X0 is not selected then a placeholder is defined.
Then there is no need to have ifdef around l2x0_of_init.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1397925170-8202-2-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 8c16babc6476111efabafbb262b47f8309942403
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:14 2014 +0200
ARM: mvebu: register the cpuidle driver for the Armada XP SoCs
The cpuidle is a platform driver so we register the device just after
the initialization of the board in an arch_initcall.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-12-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit b858fbc1919720f7f54360098ece03b383e961fa
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:13 2014 +0200
cpuidle: mvebu: Add initial CPU idle support for Armada 370/XP SoC
Add the wfi, cpu idle and cpu deep idle power states support for the
Armada XP SoCs.
All the latencies and the power consumption values used at the
"armada_370_xp_idle_driver" structure are preliminary and will be
modified in the future after running some measurements and analysis.
Based on the work of Nadav Haklai.
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-11-git-send-email-gregory.clement@free-electrons.com
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit d163ee165bd49a51f77bae632ebf37eda4899d0e
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:12 2014 +0200
ARM: mvebu: Register notifier callback for the cpuidle transition
In order to have well encapsulated code, we use notifier callbacks for
CPU_PM_ENTER and CPU_PM_EXIT inside the mvebu power management code.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-10-git-send-email-gregory.clement@free-electrons.com
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 0041464ceeccd4718de228141438335e2d92f91b
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Mon Apr 28 20:20:39 2014 +0200
ARM: mvebu: refine which files are build in mach-mvebu
Following the integration into mach-mvebu of the Kirkwood ARMv5
support, we need to be more careful about which files get built. For
example, the pmsu.c file now calls wfi(), which only exists on ARMv7
platforms.
Therefore, this commit changes mach-mvebu/Makefile to build the Armada
370/XP/375/38x specific files only when CONFIG_MACH_MVEBU_V7 is
enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1398709239-6126-1-git-send-email-thomas.petazzoni@free-electrons.com
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit c3e04cabb135625df8ff4b71ef4130f0ccbcc669
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:11 2014 +0200
ARM: mvebu: Add the PMSU related part of the cpu idle functions
The cpu idle support will need to access to Power Management Service
Unit. This commit adds the architecture related functions that will be
used in the idle path of the cpuidle driver.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-9-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit f713c7e7421d6945c977c8d8813e8089f925de41
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:10 2014 +0200
ARM: mvebu: Allow to power down L2 cache controller in idle mode
This commit adds a function which adjusts the PMSU configuration to
automatically power down the L2 and coherency fabric when we enter a
certain idle state.
This feature is part of the Power Management Service Unit of the
Armada 370 and Armada XP SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-8-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 1a6bfbc339b6a2b59a8f88fa494fe70073cdb85a
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:09 2014 +0200
ARM: mvebu: Low level function to disable HW coherency support
When going to deep idle we need to disable the SoC snooping (aka
hardware coherency support). Playing with the coherency fabric
requires to use assembly code to be sure that the compiler doesn't
reorder the instructions nor do wrong optimization.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Link: https://lkml.kernel.org/r/1397488214-20685-7-git-send-email-gregory.clement@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
commit 2e8a5942f8751c03fdd50228a02909654d13f01d
Author: Gregory CLEMENT <gregory.clement@free-electrons.com>
Date: Mon Apr 14 17:10:08 2014 +0200
ARM: mvebu: Split low level functions to manipulate HW coherency
Actually enabling coherency and adding a CPU on a SMP group are two
different operations…
ddstreet
referenced
this pull request
in ddstreet/linux
May 19, 2014
GIT 0856ad1ef175c45dc6a0bc629ca355fdfbb1001e
commit 8b1cbef71a7e83afa78455451d59d96d4228e6a9
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Fri May 16 09:36:14 2014 +1000
These days most people use git to send patches so I have added a section
about that.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
commit ded80c15f78fb796a7fd1d664abbef5c6f42ff97
Author: Randy Dunlap <rdunlap@infradead.org>
Date: Fri May 16 09:36:13 2014 +1000
Note that I don't maintain Documentation/ABI/,
Documentation/devicetree/, or the language translation files.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
commit eafaebd987fcd001e2c123c050939a29c625d673
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Mar 28 20:19:44 2014 +0100
HSI: Introduce Nokia N900 modem driver
The Nokia N900's modem is connected via Synchronous Serial Interface (SSI),
which is a legacy version of MIPI's High-speed Synchronous Serial Interface
(HSI).
The handles the GPIOs for enabling and resetting the modem and instanciates
ssi-protocol for data exchange. It does not yet support exchanging voice data
with the modem.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit dc7bf5d7186849aa36b9f0e42e250a813a7b0bdb
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Nov 15 10:50:32 2013 +0000
HSI: Introduce driver for SSI Protocol
This adds a driver for the SSI McSAAB protocol as used in
the Nokia N900.
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit dc9df3154c082873591acf95036632e97215212e
Author: Sebastian Reichel <sre@kernel.org>
Date: Sun Dec 15 23:43:10 2013 +0100
Documentation: DT: omap-ssi binding documentation
Create device tree binding documentation for
OMAP Synchronous Serial Interface (SSI) device.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
commit b209e047bc743247f74ce79e8827ae1ed556bae0
Author: Sebastian Reichel <sre@kernel.org>
Date: Sun Dec 15 23:38:58 2013 +0100
HSI: Introduce OMAP SSI driver
Add OMAP SSI driver to the HSI subsystem.
The Synchronous Serial Interface (SSI) is a legacy version
of HSI. As in the case of HSI, it is mainly used to connect
Application engines (APE) with cellular modem engines (CMT)
in cellular handsets.
It provides a multichannel, full-duplex, multi-core communication
with no reference clock. The OMAP SSI block is capable of reaching
speeds of 110 Mbit/s.
Signed-off-by: Carlos Chinea <carlos.chinea@nokia.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit a2aa24734d9dbbd3b9062c2459936c336278fa6a
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Mar 28 22:59:43 2014 +0100
HSI: Add common DT binding for HSI client devices
Implement and document generic DT bindings for HSI clients.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit 8491451024bcfabdcebd772ce9ec2fc5757acd42
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Mar 28 22:54:25 2014 +0100
HSI: export method to (un)register clients
Expose method for registering and unregistering HSI clients, so that
client drivers can register other client drivers.
This is useful for HSI drivers, which want to use the functionality
of other HSI drivers. For example the N900 modem driver can load HSI
drivers for mcsaab protocol and speech protocol.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit a088cf161cc87b39e83c7c53b9f239773422d212
Author: Sebastian Reichel <sre@kernel.org>
Date: Fri Mar 28 22:48:23 2014 +0100
HSI: Add channel resource support to HSI clients
Make HSI channel ids platform data, which can be provided
by platform data.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit a0bf37edb4d34c21bdaa19a1624378924b917491
Author: Sebastian Reichel <sre@kernel.org>
Date: Sun Oct 6 20:23:49 2013 +0200
HSI: method to unregister clients from an hsi port
This exports a method to unregister all clients from
an hsi port.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
commit ba8f073281fe0b6d50332bf005dd023ecf51efa9
Author: Fabio Falzoi <fabio.falzoi84@gmail.com>
Date: Tue Apr 22 23:23:04 2014 +0200
Staging: rts5139: More appropriate use of sizeof operand
Use the pointer rts51x to get the size of the struct.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c606525d76d16702de1b40fcf017e63f31c270c1
Author: Fabio Falzoi <fabio.falzoi84@gmail.com>
Date: Tue Apr 22 23:23:03 2014 +0200
Staging: rts5139: Removed OOM messages
All allocation Out Of Memory messages removed.
We rely on the generic OOM message in dump_stack().
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b3ef391c320b112d140f991dbde5da9c651a690
Author: Fabio Falzoi <fabio.falzoi84@gmail.com>
Date: Tue Apr 22 23:23:02 2014 +0200
Staging: rts5139: Use standard pr_<level> prefixing
Define pr_fmt macro to prefix every pr_<level> function in standard way.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7cb61930110358a62b6ef0564707ba9e201a535e
Author: Fabio Falzoi <fabio.falzoi84@gmail.com>
Date: Tue Apr 22 23:23:01 2014 +0200
Staging: rts5139: Splitted one-line multiple assignment
Splitted a multiple assignment on two separate lines.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 307a433e3d3072df727aba851595eac328d1ab4d
Author: Fabio Falzoi <fabio.falzoi84@gmail.com>
Date: Tue Apr 22 23:23:00 2014 +0200
Staging: rts5139: Fixed multi-line code alignment
Multi-line code aligned with open parenthesis.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd09d1de70480e0534eb57b0c8eb19ffbdab1d95
Author: Fabio Falzoi <fabio.falzoi84@gmail.com>
Date: Tue Apr 22 23:22:59 2014 +0200
Staging: rts5139: Camel case labels replaced
Replace camel case labels with linux coding style compliant names.
Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2787b99fd62f01af33bea5a076b665e128c67177
Author: Camille Bordignon <camille.bordignon@gmail.com>
Date: Sun Apr 6 18:21:27 2014 +0200
staging: sep: Fix coding style
Fix coding style warning "Missing a blank line after declarations"
Signed-off-by: Camille Bordignon <camille.bordignon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3136b5fee2be0c177b381b62aa5da8dd8eb3ef94
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:24 2014 +0100
staging: vt6656: Remove PIPEnsControlOutAsyn/CONTROLnsRequestOutAsyn
This now the same as PIPEnsControlOut.
Replace with PIPEnsControlOut/CONTROLnsRequestOut.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0fb2af353f11ea939b29c8cf07ce70a3882824cc
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:23 2014 +0100
staging: vt6656: PIPEnsControlIn use usb_control_msg
Now that this function is nolonger atomic useusb_control_msg.
Return STATUS_FAILURE if ntStatus less than wLength
Remove the old struct urb and struct usb_ctrlrequest structures.
Remove fMP_CONTROL_READS flag.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7021b684eb1efa9a349785f919e177c1b63af313
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:22 2014 +0100
staging: vt6656: usbpipe.c PIPEnsControlOut use usb_control_msg
Now that this fucntion is nolonger atomic change to usb_control_msg
Return STATUS_FAILURE if ntStatus less than wLength.
Remove fMP_CONTROL_WRITES flag
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c647642f6658c693d090b12c1b5bf901f3b7440
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:21 2014 +0100
staging: vt6656: lock changes device_xmit
Replace locks with the spin_lock_irqsave and spin_unlock_irqrestore
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29b02373f44d0d873a4f645b53c3cddce2f40f7b
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:20 2014 +0100
staging: vt6656: lock changes: s_nsBulkInUsbIoCompleteRead.
Use spin_lock_irqsave/spin_unlock_irqrestore
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c91b1869fb6f6d58f6321b8a88bd39577b0413a7
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:19 2014 +0100
staging: vt6656: lock changes: usbpipe.c add mutex lock.
PIPEnsControlOut and PIPEnsControlIn are nolonger
atomic but they do need a usb lock.
Add new mutex lock for these functions and PIPEnsControlOutAsyn.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97641ca2b284ddc9870afdcfe22487702ee27b3e
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:18 2014 +0100
staging: vt6656: lock changes: vRunCommand nsDMA_tx_packet
vRunCommand is nolonger atomic add lock for nsDMA_tx_packet.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8783a1a4afa4e14cf134afc7838b23fcd745b996
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:17 2014 +0100
staging: vt6656: lock changes: bMgrPrepareBeaconToSend add lock.
bMgrPrepareBeaconToSend is nolonger atomic
csBeacon_xmit must be locked add spin lock.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bc552a1a0757d97cdbb04227536c101848b6a94
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:16 2014 +0100
staging: vt6656: lock changes: vDMA0_tx_80211
vDMA0_tx_80211 is atomically called.
RFbSetPower can not be called atomically.
If wCurrentRate is different to pDevice->wCurrentRate call
bScheduleCommand WLAN_CMD_SETPOWER.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 931cb9ff6eefb5c0e92c1b170ba68f5453aab32f
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:15 2014 +0100
staging: vt6656: lock changes: csMgmt_xmit.
csMgmt_xmit is nolonger atomically called but part of must be.
Reorder the function so that RFbSetPower is called first.
Add new lock spinlock for the remainder of the function.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e03ce8393e41ddff574c95ac72378ed1f02cef54
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:14 2014 +0100
staging: vt6656: lock changes: RXvMngWorkItem.
Narrow atomic locks in RXvMngWorkItem.
We must lock the DequeueRCB and RXvFreeRCB so that
they are in sync.
vMgrRxManagePacket can nolonger be atomically called.
There is no need for an overall lock.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1d4120f7fab69b32d40780b766109d377d743a7
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:13 2014 +0100
staging: vt6656: lock changes: vRunCommand remove locks.
Removing atomic locked paths to usbpipe.c PIPEnsControlOut and PIPEnsControlIn
This function will nolonger need any locking.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7af94000fecf67ebea144a2a0427bdb6a795f890
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:12 2014 +0100
staging: vt6656: lock changes: Remove spin locks.
Remove atomic paths to usbpipe.c PIPEnsControlOut and PIPEnsControlIn
Remove from
PIPEnsControlOut
PIPEnsControlIn
BSSvSecondCallBack
vt6656_hostap_ioctl
iwctl_siwmode
iwctl_siwencode
iwctl_siwpower
iwctl_siwencodeext
KeyvInitTable
device_init_registers
device_open
device_close
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30a05b397ce410685532120e97c6cc378dd31a1f
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:11 2014 +0100
staging: vt6656: struct vnt_usb_send_context remove camel case.
Camel case changes
pDevice -> priv
pPacket -> skb
pUrb -> urb
uBufLen -> buf_len;
bBoolInUse -> in_use
Data -> data
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b674ee142296b84ea8514da52e9185dab4070b72
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Thu May 15 22:49:10 2014 +0100
staging: vt6656: nsDMA_tx_packet Move pContext later.
call s_vGetFreeContext later in function skiping large
chunk of code.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccc3a5986daefdf0aef76f3664ac6848e3d9515e
Author: Denis Pithon <denis.pithon@gmail.com>
Date: Mon May 12 17:22:46 2014 +0200
staging/wlan-ng: code refactoring
Extract new static function from p80211netdev_rx_bh() to fix coding
style issue (too many leading tabs).
Signed-off-by: Denis Pithon <denis.pithon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05d39beeb865940852f469f1ce067cc7fa607a72
Author: Denis Pithon <denis.pithon@gmail.com>
Date: Mon May 12 17:22:45 2014 +0200
staging/wlan-ng: remove function declaration
Removed useless function prototype: static function p80211netdev_rx_bh()
is defined before being used.
Signed-off-by: Denis Pithon <denis.pithon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67c4ded5a3cfc666f149f2dee3ad5ae2f06f1736
Author: Denis Pithon <denis.pithon@gmail.com>
Date: Mon May 12 17:22:44 2014 +0200
staging/wlan-ng: update function header comment
Header comment of p80211netdev_rx_bh() does not match function
prototype. Fixed.
Signed-off-by: Denis Pithon <denis.pithon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cf22fda6272e5240a118f003d9222da5489af38
Author: Neil Armstrong <superna9999@gmail.com>
Date: Fri Apr 11 15:00:49 2014 +0200
staging: wlan-ng: fix bad symbol declaration
With sparse, the following error appears :
CHECK drivers/staging/wlan-ng/p80211netdev.c
drivers/staging/wlan-ng/cfg80211.c:710:6: warning: symbol 'prism2_connect_result' was not declared. Should it be static?
drivers/staging/wlan-ng/cfg80211.c:719:6: warning: symbol 'prism2_disconnected' was not declared. Should it be static?
drivers/staging/wlan-ng/cfg80211.c:725:6: warning: symbol 'prism2_roamed' was not declared. Should it be static?
Move functions declaration to coherent internal header file.
Signed-off-by: Neil 'Superna' Armstrong <superna9999@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d85fe346fc34e1d5932974a95440297cd7a009f
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:35:15 2014 +0200
driver: staging: wlan-ng: Removed unnecessary spaces after cast from hfa384x_usb.c
Fixed: No space is necessary after a cast
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 638f81b849a306e4a897f99f51e22ba515338e21
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:35:06 2014 +0200
driver: staging: wlan-ng: Removed #if 0 lines from hfa384x_usb.c
Removed lines that were ignored by #if 0
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 96b1971ace70c563048d341bfc1bd55754b95183
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:34:56 2014 +0200
driver: staging: wlan-ng: Removed multiple assignments
Removed multiple assignments from hfa384x_usb.c
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3542e664bb10c10c52088efc460371225a939b0
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:34:48 2014 +0200
driver: staging: wlan-ng: Fixed white spaces issues
In hfa384x_usb.c:
Moved Logical continuations to the correct lines
Removed unnecessary blank lines
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f2d656481c64bad30f1f92b3834c6c2b5851916
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:34:40 2014 +0200
driver: staging: wlan-ng: Fixed Alignment to match open parenthesis
Fixed Alignment to match open parenthesis in hfa384x_usb.c
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83f91687b0922511eceddb9831e9f86c08bb3873
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:34:12 2014 +0200
driver: staging: wlan-ng: Removed Unnecessary space after function pointer name
Removed Unnecessary space after function pointer name
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6ae4a9995fa19ecde23f425a027f445074ba1ec
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:34:01 2014 +0200
driver: staging: wlan-ng: Setting character pointers as const
changed declaration of ctlx_str to:
static const char * const ctlx_str[]
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit baa8a6c008329de5dd6909658c7f892340e4b5f0
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:33:53 2014 +0200
driver: staging: wlan-ng: switched to pr_warn
changed printk(KERN_WARNING .. to pr_warn
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a03742ac96fceac7b103aff7b9714605a21b8a3e
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:33:45 2014 +0200
driver: staging: wlan-ng: Removed unnecessary typedefs from hfa384x_usb.c
Removed unnecessary typedefs from hfa384x_usb.c
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a21201369568a4e5bd23fb5cb9a966a1008637a6
Author: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Date: Sat Apr 5 23:33:16 2014 +0200
driver: staging: wlan-ng: Fixed Breaking long lines and strings style rule
Fixed coding style rule "Breaking long lines and strings" for hfa384x_usb.c
Signed-off-by: Sherif Shehab Aldin <shehabaldin.sherif@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b2a9d3fd4fec79876349ffdda088651af7b2119
Author: Vivek Gautam <gautam.vivek@samsung.com>
Date: Fri May 16 06:38:15 2014 +0900
ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250
Removing the dt node for older usb3 phy driver from Exynos5250
device tree and updating the dt node for DWC3 controller to
use new phy driver based on generic phy framework.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit dd47964d780a96ae3957f6c4d1243bf5d39a4118
Author: Vivek Gautam <gautam.vivek@samsung.com>
Date: Fri May 16 06:38:10 2014 +0900
ARM: dts: Enable support for generic USB DRD phy for exynos5250
Add device tree node for new usbdrd-phy driver, which
is based on generic phy framework.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit bf963efe024e04d90396a6464bb179c68b2edbcb
Author: Vivek Gautam <gautam.vivek@samsung.com>
Date: Fri May 16 06:38:01 2014 +0900
ARM: dts: Enable support for DWC3 controller for exynos5420
Add device tree nodes for DWC3 controller present on
Exynos 5420 SoC, to enable support for USB 3.0.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit d102e35f1cd364466ea848791a12a1229d4a9c39
Author: Vivek Gautam <gautam.vivek@samsung.com>
Date: Fri May 16 06:37:03 2014 +0900
ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420
Add device tree nodes for USB 3.0 PHY present alongwith
USB 3.0 controller Exynos 5420 SoC. This phy driver is
based on generic phy framework.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit b7bb243924e9284f605368e22c3aa4ca3c980d81
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Thu May 15 20:58:11 2014 +0300
drm/i915: Enable rc6 with bdw
Everything should be in place so enable rc6/rps for bdw.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 8fd9c1a9d7f490c9f530b7a6108322b6789e02c4
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Thu May 15 20:58:10 2014 +0300
drm/i915: Fix rc6 options debug info
by correctly displaying result and requested.
Suggested-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit baccd4586ed948569207de83f28772376d5c3772
Author: Deepak S <deepak.s@linux.intel.com>
Date: Thu May 15 20:58:09 2014 +0300
drm/i915: Enable PM Interrupts target via Display Interface.
In BDW, Apart from unmasking up/down threshold interrupts. we need
to umask bit 32 of PM_INTRMASK to route interrupts to target via Display
Interface.
v2: Add (1<<31) mask (Ville)
v3: Add Gen check for the mask (ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 0961021aef788e9d0d4e34256655d6c761ef716b
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date: Thu May 15 20:58:08 2014 +0300
drm/i915/bdw: Implement a basic PM interrupt handler
Almost all of it is reusable from the existing code. The primary
difference is we need to do even less in the interrupt handler, since
interrupts are not shared in the same way.
The patch is mostly a copy-paste of the existing snb+ code, with updates
to the relevant parts requiring changes to the interrupt handling. As
such it /should/ be relatively trivial. It's highly likely that I missed
some places where I need a gen8 version of the PM interrupts, but it has
become invisible to me by now.
This patch could probably be split into adding the new functions,
followed by actually handling the interrupts. Since the code is
currently disabled (and broken) I think the patch stands better by
itself.
v2: Move the commit about not touching the ringbuffer interrupt to the
snb_* function where it belongs (Rodrigo)
v3: Rebased on Paulo's runtime PM changes
v4: Not well validated, but rebase on
commit 730488b2eddded4497f63f70867b1256cd9e117c
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Fri Mar 7 20:12:32 2014 -0300
drm/i915: kill dev_priv->pm.regsave
v5: Rebased on latest code base. (Deepak)
v6: Remove conflict markers, Unnecessary empty line and use right
IIR interrupt (Ville)
v7: mask modified without rmw (Ville Syrjälä)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 6e450ab24dc645d776e65bbb91fc5f6788087c32
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date: Thu May 15 20:58:07 2014 +0300
drm/i915: Bail out early on gen6_signal if no semaphores
If we dont have semaphores enabled, we allocate 4
dwords for signalling. But end up emitting more regardless.
Fix this by bailing out early if semaphores are not enabled.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78274
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78283
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 47dd0b76ace953bd2c0479076db0d3e3b9594003
Author: Dave Jones <davej@redhat.com>
Date: Thu May 15 15:03:53 2014 -0400
selinux: conditionally reschedule in hashtab_insert while loading selinux policy
After silencing the sleeping warning in mls_convert_context() I started
seeing similar traces from hashtab_insert. Do a cond_resched there too.
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
commit 612c353178c45250fbec271e7e8e75596d5cbbea
Author: Dave Jones <davej@redhat.com>
Date: Thu May 15 15:02:53 2014 -0400
selinux: conditionally reschedule in mls_convert_context while loading selinux policy
On a slow machine (with debugging enabled), upgrading selinux policy may take
a considerable amount of time. Long enough that the softlockup detector
gets triggered.
The backtrace looks like this..
> BUG: soft lockup - CPU#2 stuck for 23s! [load_policy:19045]
> Call Trace:
> [<ffffffff81221ddf>] symcmp+0xf/0x20
> [<ffffffff81221c27>] hashtab_search+0x47/0x80
> [<ffffffff8122e96c>] mls_convert_context+0xdc/0x1c0
> [<ffffffff812294e8>] convert_context+0x378/0x460
> [<ffffffff81229170>] ? security_context_to_sid_core+0x240/0x240
> [<ffffffff812221b5>] sidtab_map+0x45/0x80
> [<ffffffff8122bb9f>] security_load_policy+0x3ff/0x580
> [<ffffffff810788a8>] ? sched_clock_cpu+0xa8/0x100
> [<ffffffff810786dd>] ? sched_clock_local+0x1d/0x80
> [<ffffffff810788a8>] ? sched_clock_cpu+0xa8/0x100
> [<ffffffff8103096a>] ? __change_page_attr_set_clr+0x82a/0xa50
> [<ffffffff810786dd>] ? sched_clock_local+0x1d/0x80
> [<ffffffff810788a8>] ? sched_clock_cpu+0xa8/0x100
> [<ffffffff8103096a>] ? __change_page_attr_set_clr+0x82a/0xa50
> [<ffffffff810788a8>] ? sched_clock_cpu+0xa8/0x100
> [<ffffffff81534ddc>] ? retint_restore_args+0xe/0xe
> [<ffffffff8109c82d>] ? trace_hardirqs_on_caller+0xfd/0x1c0
> [<ffffffff81279a2e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [<ffffffff810d28a8>] ? rcu_irq_exit+0x68/0xb0
> [<ffffffff81534ddc>] ? retint_restore_args+0xe/0xe
> [<ffffffff8121e947>] sel_write_load+0xa7/0x770
> [<ffffffff81139633>] ? vfs_write+0x1c3/0x200
> [<ffffffff81210e8e>] ? security_file_permission+0x1e/0xa0
> [<ffffffff8113952b>] vfs_write+0xbb/0x200
> [<ffffffff811581c7>] ? fget_light+0x397/0x4b0
> [<ffffffff81139c27>] SyS_write+0x47/0xa0
> [<ffffffff8153bde4>] tracesys+0xdd/0xe2
Stephen Smalley suggested:
> Maybe put a cond_resched() within the ebitmap_for_each_positive_bit()
> loop in mls_convert_context()?
That seems to do the trick. Tested by downgrading and re-upgrading selinux-policy-targeted.
Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
commit bf2ec0f9ada1db6778851fcc9f736b5ca00c97ec
Author: Micky Ching <micky_ching@realsil.com.cn>
Date: Wed Apr 2 17:58:52 2014 +0800
staging: rts5208: fix static checker warnings
The patch fa590c222fba: "staging: rts5208: add support for rts5208
and rts5288" from Nov 12, 2013, leads to the following static checker
warning:
drivers/staging/rts5208/rtsx_chip.c:107 rtsx_enable_bus_int()
warn: add curly braces?
This warning is produced because incorrect code indent.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5535c4dd475ff936d36ad4d3f85d8be74f30245f
Author: Rocco Folino <lordzen87@gmail.com>
Date: Thu Apr 3 00:47:46 2014 +0200
staging: gs_fpgaboot: Fixed code style issues
Fixed missing a blank line after declarations warning
Signed-off-by: Rocco Folino <lordzen87@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3c5261e04b9ace521e9392f7b6a28f62b28b9fc
Author: Jerry Snitselaar <dev@snitselaar.org>
Date: Thu Apr 24 00:31:48 2014 -0700
staging/line6: blank line after declaration cleanup
Fix coding style warnings reported by checkpath.
Signed-off-by: Jerry Snitselaar <dev@snitselaar.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62ca89a1d014623b1a59aa60b6055d022f1f8836
Author: Artem Fetishev <wwctrsrx@gmail.com>
Date: Sun May 11 21:14:30 2014 +0300
drivers: staging: ft1000: Fix lines over 80 characters
..plus some function arg indentation which I haven't noticed at first.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48d1e475363638b58f76ee0bd3887082990ea0f9
Author: Artem Fetishev <wwctrsrx@gmail.com>
Date: Sun May 11 21:14:29 2014 +0300
drivers: staging: ft1000: Remove typedefs
Remove typedefs according to the "Chapter 5: Typedefs" from
Documentation/CodingStyle.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5df466cd66159826276f7b807a7e729f6a40c09d
Author: Artem Fetishev <wwctrsrx@gmail.com>
Date: Sun May 11 21:14:28 2014 +0300
drivers: staging: ft1000: Use pr_info instead of printk
Improve coding style by fixing this checkstyle warning:
WARNING: Prefer [subsystem eg: netdev]_info([subsystem]dev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4da658ea91f8813f3eee8f40c82a7937449a741
Author: Artem Fetishev <wwctrsrx@gmail.com>
Date: Sun May 11 21:14:27 2014 +0300
drivers: staging: ft1000: Fix IOCTL_FT1000_* marcos
Fixes include:
- Add closing brackets;
- Remove sizeof (_IOR and _IOW macro can accept types);
- Replace _IOW which size of 0 (the last arg) with _IO.
- Actually these macros are not used anywhere and might be removed.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5fd29b013b0df6bcb411c54f21a2661c142a118e
Author: Artem Fetishev <wwctrsrx@gmail.com>
Date: Sun May 11 21:14:26 2014 +0300
drivers: staging: ft1000: Fix indentation
Fixes indentation in header files.
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dab531b4305bc2852ce6f934dc283464d46871a5
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed May 14 19:32:14 2014 -0700
net: systemport: pad packets to a minimum of 68 bytes
Packets need to be at least 64 bytes to enter the switch port logic,
including the FCS, otherwise they will be discarded as RUNT packets.
With packets having Broadcom tags, the 4-bytes tag is first stripped
off the packet, and the packet length is then checked, so we need to
make sure that the packet length with FCS is at least 64 bytes.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit d5e32cc7c997d1d4f18031f5ff88512bd65118f7
Author: Florian Fainelli <f.fainelli@gmail.com>
Date: Wed May 14 19:32:13 2014 -0700
net: systemport: only update UMAC_CMD if something changed
The link adjustment callback can be called as frequently as desired by
the PHY library, as such, let's avoid doing a Read/Modify/Write sequence
if nothing changed, which is more than likely since we are interfaced
with a switch device.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 77a6f000a1a22d295b87a1a767ffe75b98f1775f
Author: Angus Gibson <darthshrine@gmail.com>
Date: Mon Apr 7 12:29:30 2014 +1000
staging: ft1000: remove explicit static initialisation
Fix checkpatch.pl error where a static variable was explicitly
initialised to false
Signed-off-by: Angus Gibson <darthshrine@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 248b6a67567778123bf635945659e64cfe272e3b
Author: Paul McQuade <paulmcquad@gmail.com>
Date: Thu Apr 3 17:21:22 2014 +0100
Staging:ft1000_debug.c:Renaming __FUNCTION__
__Function__ gets renamed with __func__
Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a713cd594117c6841dbd56b608fa8629673f6617
Author: Anders Darander <anders.darander@gmail.com>
Date: Tue Apr 1 08:29:40 2014 +0200
Staging: ft1000-usb: use netdev_warn
Fix coding style issue by replacing printk with netdev_warn.
Signed-off-by: Anders Darander <anders.darander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87a76301091f8ff0c24e31c8befc6a4f699536f1
Author: Anders Darander <anders.darander@gmail.com>
Date: Tue Apr 1 08:29:39 2014 +0200
Staging: ft1000-usb: wrap macros in do while
Fix coding style issue by wrapping the macro in a do {} while (0).
Signed-off-by: Anders Darander <anders.darander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d91e5c02555ae838e9d783b9e83e125fd10dca73
Author: Vince Bridgers <vbridgers2013@gmail.com>
Date: Wed May 14 14:38:37 2014 -0500
Altera TSE: Disable Multicast filtering to workaround problem
This patch disables multicast hash filtering if present in the hardware
and uses promiscuous mode instead until the problem with multicast
filtering has been debugged, integrated and tested.
Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 898305806ad56ae11dc2c80931062e6a2c7bba48
Author: Vince Bridgers <vbridgers2013@gmail.com>
Date: Wed May 14 14:38:36 2014 -0500
Altera TSE: Fix sparse errors and warnings
This patch fixes the many sparse errors and warnings contained in the
initial submission of the Altera Triple Speed Ethernet driver, and a
few minor cppcheck warnings. Changes are tested on ARM and NIOS2
example designs, and compile tested against multiple architectures.
Typical issues addressed were as follows:
altera_tse_ethtool.c:136:19: warning: incorrect type in argument
1 (different address spaces)
altera_tse_ethtool.c:136:19: expected void const volatile
[noderef] <asn:2>*addr
altera_tse_ethtool.c:136:19: got unsigned int *<noident>
...
altera_sgdma.c:129:31: warning: cast removes address space of
expression
Signed-off-by: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit c80561e96b81a01c3e4988fc08093479a1f0c914
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Wed May 14 19:13:07 2014 +0300
staging: dgnc: UART_IIR_XOFF code is buggy
The UART_IIR_XOFF was supposed to be a no-op but, because there was a
missing semi-colon, the if statement is not "Empty". I have just deleted
this code because it was supposed to be a no-op anyway. UART_IIR_XOFF
is a standard define and not something specific to this driver.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f33ae1ed6ac39da7b1f73972eb4791fe43d15d3
Author: Martin Kepplinger <martink@posteo.de>
Date: Tue Apr 29 11:43:08 2014 +0200
staging: dgnc: use dev_err() instead of printk()
Use dev_err() insted of printk() in order to provice userspace with
more useful information and use the common kernel coding style.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 36aa10aa018c2ed5571ffd145f39d3fcf993cee0
Author: Vitaly Osipov <vitaly.osipov@gmail.com>
Date: Sun Apr 27 00:59:17 2014 +1000
staging: dgnc: redundant NULL checks before kfree()
Removed redundant NULL checks before calling kfree()
Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f2889621a6d47c3aa5e4284af808f8d79cc5d5d
Author: Son P. Nguyen <fastmutex@gmail.com>
Date: Sun Apr 20 18:05:39 2014 +0000
Staging: dgnc: dgnc_driver: fixed incorrect braces
Fixed incorrect braces (coding style)
Signed-off-by: Son P. Nguyen <fastmutex@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit df38e6558db777e1e4403a3fc16bf177fe44b79b
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date: Mon Apr 14 11:18:26 2014 +0530
drm/i915: MIPI PPS delays added
Added as generic parameters which will be initialized in the panel
driver and are specific to panels.
Backlight delays have also kept as placeholders and will be used used
once we have MIPI backlight enabling support
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit cf4dbd2ecb2467d0fdec80e10b2d30cfda3d0de3
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date: Mon Apr 14 11:18:25 2014 +0530
drm/i915: MIPI init count programming as generic parameter
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit dfba2e2d3302b509fbf8bccd71ca5b2e0b47fefa
Author: Shobhit Kumar <shobhit.kumar@intel.com>
Date: Mon Apr 14 11:18:24 2014 +0530
drm/i915: Correct MIPI operation mode as per expected values from VBT
In VBT fields operation mode is 0 for Video mode and 1 for command mode.
This field will be directly used as is in generic panel driver. So
adjust accordingly.
Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 5f47dfb400d6a82d5ce9cdf537e33969af8278ff
Author: Joe Perches <joe@perches.com>
Date: Wed May 14 12:15:13 2014 -0700
ti: Remove trailing semicolon from do {...} while (0) macro
These should not have trailing semicolons so remove them.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 2b46be68a1b67f40df4f288b90e79181c387eda6
Author: Antoine Sirinelli <antoine@monte-stello.com>
Date: Thu Mar 27 22:31:55 2014 +0100
staging: dgnc: cleanup dgnc_finalize_board_init()
Trivial cleanups:
- Transform a printk() to a dev_err() call
- Fix 2 lines over 80 characters
Signed-off-by: Antoine Sirinelli <antoine@monte-stello.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 542f3d5af89c15d0b4e80bbf927d252efa0e48c3
Author: Mark Hounschell <markh@compro.net>
Date: Fri Apr 25 14:32:15 2014 -0400
staging: dgap: Add Mark Hounschell to maintainers list for dgap
Add Mark Hounschell to the MAINTAINERs list for the dgap driver
Signed-off-by: Mark Hounschell <markh@compro.net>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8430466a08341994c39396eb79b68e59ecc127e8
Author: Rahul Sharma <Rahul.Sharma@samsung.com>
Date: Fri May 16 05:06:34 2014 +0900
ARM: dts: enable hdmi for exynos5800-peach-pi board
Enable hdmi for peach-pi board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Acked-by: Tomasz Figa<t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 8f577cadf7181243d336be9aba40c1bcc02c4c54
Author: Alexei Starovoitov <ast@plumgrid.com>
Date: Tue May 13 19:50:47 2014 -0700
seccomp: JIT compile seccomp filter
Take advantage of internal BPF JIT
05-sim-long_jumps.c of libseccomp was used as micro-benchmark:
seccomp_rule_add_exact(ctx,...
seccomp_rule_add_exact(ctx,...
rc = seccomp_load(ctx);
for (i = 0; i < 10000000; i++)
syscall(...);
$ sudo sysctl net.core.bpf_jit_enable=1
$ time ./bench
real 0m2.769s
user 0m1.136s
sys 0m1.624s
$ sudo sysctl net.core.bpf_jit_enable=0
$ time ./bench
real 0m5.825s
user 0m1.268s
sys 0m4.548s
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 622582786c9e041d0bd52bde201787adeab249f8
Author: Alexei Starovoitov <ast@plumgrid.com>
Date: Tue May 13 19:50:46 2014 -0700
net: filter: x86: internal BPF JIT
Maps all internal BPF instructions into x86_64 instructions.
This patch replaces original BPF x64 JIT with internal BPF x64 JIT.
sysctl net.core.bpf_jit_enable is reused as on/off switch.
Performance:
1. old BPF JIT and internal BPF JIT generate equivalent x86_64 code.
No performance difference is observed for filters that were JIT-able before
Example assembler code for BPF filter "tcpdump port 22"
original BPF -> old JIT: original BPF -> internal BPF -> new JIT:
0: push %rbp 0: push %rbp
1: mov %rsp,%rbp 1: mov %rsp,%rbp
4: sub $0x60,%rsp 4: sub $0x228,%rsp
8: mov %rbx,-0x8(%rbp) b: mov %rbx,-0x228(%rbp) // prologue
12: mov %r13,-0x220(%rbp)
19: mov %r14,-0x218(%rbp)
20: mov %r15,-0x210(%rbp)
27: xor %eax,%eax // clear A
c: xor %ebx,%ebx 29: xor %r13,%r13 // clear X
e: mov 0x68(%rdi),%r9d 2c: mov 0x68(%rdi),%r9d
12: sub 0x6c(%rdi),%r9d 30: sub 0x6c(%rdi),%r9d
16: mov 0xd8(%rdi),%r8 34: mov 0xd8(%rdi),%r10
3b: mov %rdi,%rbx
1d: mov $0xc,%esi 3e: mov $0xc,%esi
22: callq 0xffffffffe1021e15 43: callq 0xffffffffe102bd75
27: cmp $0x86dd,%eax 48: cmp $0x86dd,%rax
2c: jne 0x0000000000000069 4f: jne 0x000000000000009a
2e: mov $0x14,%esi 51: mov $0x14,%esi
33: callq 0xffffffffe1021e31 56: callq 0xffffffffe102bd91
38: cmp $0x84,%eax 5b: cmp $0x84,%rax
3d: je 0x0000000000000049 62: je 0x0000000000000074
3f: cmp $0x6,%eax 64: cmp $0x6,%rax
42: je 0x0000000000000049 68: je 0x0000000000000074
44: cmp $0x11,%eax 6a: cmp $0x11,%rax
47: jne 0x00000000000000c6 6e: jne 0x0000000000000117
49: mov $0x36,%esi 74: mov $0x36,%esi
4e: callq 0xffffffffe1021e15 79: callq 0xffffffffe102bd75
53: cmp $0x16,%eax 7e: cmp $0x16,%rax
56: je 0x00000000000000bf 82: je 0x0000000000000110
58: mov $0x38,%esi 88: mov $0x38,%esi
5d: callq 0xffffffffe1021e15 8d: callq 0xffffffffe102bd75
62: cmp $0x16,%eax 92: cmp $0x16,%rax
65: je 0x00000000000000bf 96: je 0x0000000000000110
67: jmp 0x00000000000000c6 98: jmp 0x0000000000000117
69: cmp $0x800,%eax 9a: cmp $0x800,%rax
6e: jne 0x00000000000000c6 a1: jne 0x0000000000000117
70: mov $0x17,%esi a3: mov $0x17,%esi
75: callq 0xffffffffe1021e31 a8: callq 0xffffffffe102bd91
7a: cmp $0x84,%eax ad: cmp $0x84,%rax
7f: je 0x000000000000008b b4: je 0x00000000000000c2
81: cmp $0x6,%eax b6: cmp $0x6,%rax
84: je 0x000000000000008b ba: je 0x00000000000000c2
86: cmp $0x11,%eax bc: cmp $0x11,%rax
89: jne 0x00000000000000c6 c0: jne 0x0000000000000117
8b: mov $0x14,%esi c2: mov $0x14,%esi
90: callq 0xffffffffe1021e15 c7: callq 0xffffffffe102bd75
95: test $0x1fff,%ax cc: test $0x1fff,%rax
99: jne 0x00000000000000c6 d3: jne 0x0000000000000117
d5: mov %rax,%r14
9b: mov $0xe,%esi d8: mov $0xe,%esi
a0: callq 0xffffffffe1021e44 dd: callq 0xffffffffe102bd91 // MSH
e2: and $0xf,%eax
e5: shl $0x2,%eax
e8: mov %rax,%r13
eb: mov %r14,%rax
ee: mov %r13,%rsi
a5: lea 0xe(%rbx),%esi f1: add $0xe,%esi
a8: callq 0xffffffffe1021e0d f4: callq 0xffffffffe102bd6d
ad: cmp $0x16,%eax f9: cmp $0x16,%rax
b0: je 0x00000000000000bf fd: je 0x0000000000000110
ff: mov %r13,%rsi
b2: lea 0x10(%rbx),%esi 102: add $0x10,%esi
b5: callq 0xffffffffe1021e0d 105: callq 0xffffffffe102bd6d
ba: cmp $0x16,%eax 10a: cmp $0x16,%rax
bd: jne 0x00000000000000c6 10e: jne 0x0000000000000117
bf: mov $0xffff,%eax 110: mov $0xffff,%eax
c4: jmp 0x00000000000000c8 115: jmp 0x000000000000011c
c6: xor %eax,%eax 117: mov $0x0,%eax
c8: mov -0x8(%rbp),%rbx 11c: mov -0x228(%rbp),%rbx // epilogue
cc: leaveq 123: mov -0x220(%rbp),%r13
cd: retq 12a: mov -0x218(%rbp),%r14
131: mov -0x210(%rbp),%r15
138: leaveq
139: retq
On fully cached SKBs both JITed functions take 12 nsec to execute.
BPF interpreter executes the program in 30 nsec.
The difference in generated assembler is due to the following:
Old BPF imlements LDX_MSH instruction via sk_load_byte_msh() helper function
inside bpf_jit.S.
New JIT removes the helper and does it explicitly, so ldx_msh cost
is the same for both JITs, but generated code looks longer.
New JIT has 4 registers to save, so prologue/epilogue are larger,
but the cost is within noise on x64.
Old JIT checks whether first insn clears A and if not emits 'xor %eax,%eax'.
New JIT clears %rax unconditionally.
2. old BPF JIT doesn't support ANC_NLATTR, ANC_PAY_OFFSET, ANC_RANDOM
extensions. New JIT supports all BPF extensions.
Performance of such filters improves 2-4 times depending on a filter.
The longer the filter the higher performance gain.
Synthetic benchmarks with many ancillary loads see 20x speedup
which seems to be the maximum gain from JIT
Notes:
. net.core.bpf_jit_enable=2 + tools/net/bpf_jit_disasm is still functional
and can be used to see generated assembler
. there are two jit_compile() functions and code flow for classic filters is:
sk_attach_filter() - load classic BPF
bpf_jit_compile() - try to JIT from classic BPF
sk_convert_filter() - convert classic to internal
bpf_int_jit_compile() - JIT from internal BPF
seccomp and tracing filters will just call bpf_int_jit_compile()
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit f3c2af7ba17a83809806880062c9ad541744fb95
Author: Alexei Starovoitov <ast@plumgrid.com>
Date: Tue May 13 19:50:45 2014 -0700
net: filter: x86: split bpf_jit_compile()
Split bpf_jit_compile() into two functions to improve readability
of for(pass++) loop. The change follows similar style of JIT compilers
for arm, powerpc, s390
The body of new do_jit() was not reformatted to reduce noise
in this patch, since the following patch replaces most of it.
Tested with BPF testsuite.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 721b79d12fef7f13c0ac2cabb7cce39976769fcf
Author: Christian Engelmayer <cengelma@gmx.at>
Date: Wed May 7 21:43:37 2014 +0200
staging: vt6656: fix potential leak in vt6656_hostap_ioctl()
Commit fb841d67 (staging: vt6656: don't leak 'param' in vt6656_hostap_ioctl()
when returning -EOPNOTSUPP) cleaned up direct returns in the ioctl switch
statement that leaked already allocated memory. Fix the same issue for
VIAWGET_HOSTAPD_SCAN_REQ and VIAWGET_HOSTAPD_MLME that are not supported by
this driver. Detected by Coverity - CID 144381.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92216fa31ef27bd840e921d1f474213cdbe3fb70
Author: Rahul Sharma <Rahul.Sharma@samsung.com>
Date: Fri May 16 05:23:21 2014 +0900
ARM: dts: enable hdmi for exynos5420-peach-pit board
Enable hdmi for exynos5420 based peach-pit board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Acked-by: Tomasz Figa<t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 62a3f8a10d8dab8bae7565358bee3f923f02b8a0
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Wed Apr 30 21:31:13 2014 +0100
staging: vt6656: desh.h Remove unused macros and structures.
All are dead and of no use.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05cc617b5db8a6debac873e4dcfbd6d679406730
Author: Malcolm Priestley <tvboxspy@gmail.com>
Date: Wed Apr 30 21:31:12 2014 +0100
staging: vt6656: rxtx: Remove unused uDMAIdx from driver.
Remove from functions and callers.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea9a8dae5acca2e2ac0421279de7818e92e4b251
Author: Martin Kepplinger <martink@posteo.de>
Date: Tue May 6 07:58:39 2014 +0200
staging: vt6656: make spin_lock_irq() human readable
Don't require FIRMWAREbDownload() to, first off, unlock a held lock.
Thus do all locking in main_usb.c and hold it for a insignificantly
shorter period of time. This makes the affected area significantly more
readable though.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc5cf6563576bb36baa7e93417b9a2e29999a5c6
Author: Guido Martínez <guido@vanguardiasur.com.ar>
Date: Sat Apr 19 16:45:00 2014 -0300
staging: vt6655: fix checkpatch bracing issues
This patchs fixes tons of warnings such as:
WARNING: braces {} are not necessary for single statement blocks
#354: FILE: drivers/staging/vt6655/wmgr.c:354:
+ for (ii = 0; ii < WLAN_BSSID_LEN; ii++) {
+ pMgmt->abyDesireBSSID[ii] = 0xFF;
+ }
Please note: this patch only fixes bracing issues (and there is still a
lot to do); so if you run checkpatch it _will_ throw a lot of errors.
Use --test-only=braces
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e8a7e5fc29697f881f5c358f84df52914908703
Author: Guido Martínez <guido@vanguardiasur.com.ar>
Date: Sat Apr 19 16:44:59 2014 -0300
staging: vt6655: remove dead code
Remove dead code in many places on this driver.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3da8a316cfb52bc360960ad293433cba393d2943
Author: Rahul Sharma <Rahul.Sharma@samsung.com>
Date: Fri May 16 05:23:16 2014 +0900
ARM: dts: change to correct compatible string for exynos5420 hdmi
Replace compatible string for HDMI node in Exynos5420. Since
latest restructring in Drm hdmi driver, it is agreed to use
a seperate compatible string for Exynos5420 HDMI IP siince it
uses APB mapped Phy.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit 838c2d6cfc0c2dc8ce136e01e681fc6cf4124c39
Author: Tobias Klauser <tklauser@distanz.ch>
Date: Fri Apr 25 11:53:58 2014 +0200
staging: vt6656: Use proper target pointer in memcpy()
The coverity scanner marked these two memcpy()'s as causing a buffer
overflow in CIDs 142743 and 142744. This is due the h_dest member of
struct ethhdr being used as a target (size ETH_ALEN) in memcpy, but the
copy is of size ETH_HLEN. However, the intention here seems to be to
copy the entire ethernet header. Make that clear by specifying the
proper destination buffer.
Also remove the unnecessary casts of the source argument.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34bdb981f7cb446259b0999d40f090c16f732eca
Author: Tobias Klauser <tklauser@distanz.ch>
Date: Fri Apr 25 15:39:12 2014 +0200
staging: vt6656: Remove unnecesssary NULL check
pFifoHead points to tx_buffer->fifo_head which can never be NULL.
We also don't need to check for tx_buffer being NULL instead, since it
always points to ->Data of struct vnt_usb_send_context - the pointer to
which was checked before calling s_vGenerateTxParameter().
Silences a dereference before NULL check warning reported by the coverity
scanner in CID 1127221.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91ed9a7cddf1130af3a3aef0325d6e6d08eaffb2
Author: Nicolas Del Piano <ndel314@gmail.com>
Date: Fri Apr 25 14:36:56 2014 -0300
Staging: vt6655: tether: fixed a brace coding style issue
Fixed a coding style issue.
Signed-off-by: Nicolas Del Piano <ndel314@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit db35b140c6f39135a3593044ce5fd384e51a3a35
Author: Rahul Sharma <Rahul.Sharma@samsung.com>
Date: Fri May 16 05:22:41 2014 +0900
ARM: dts: enable hdmi for exynos5250 based snow board
Enable support for HDMI for exynos5250 based Snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit a99698facdb92adebf4a4ed7691493b7e08ff5b6
Author: Alan <alan@linux.intel.com>
Date: Mon May 12 16:57:22 2014 +0100
goldfish: clean up the pipe driver 64bit ifdefs
Use the 64bit helper method to scrub most of the ifdefs from the driver. The
pipe reading has a funny case we can't scrub completely.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d78055dc9c786b392ce7b593c479bb9a3e1da61d
Author: Alan <alan@linux.intel.com>
Date: Mon May 12 16:57:14 2014 +0100
goldfish: clean up the checkpatch warnings
Mostly spacing changes, also making the operations structure const
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0f682e05f51c9eff68e61ce2350155895cd739e
Author: Alan <alan@acox1-desk.ger.corp.intel.com>
Date: Mon May 12 16:57:05 2014 +0100
goldfish: clean up tty 64bit support
Use the helper we now have available.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6279717bbb20bf90ec414af17d2a31d843f5eb5
Author: Alan <alan@linux.intel.com>
Date: Mon May 12 16:56:56 2014 +0100
goldfish: clean up staging ifdefs
Use the write helpers and add an audio helper
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b17aeec232a5f0a61ce3952c2e728a0eeddda8b
Author: Alan <alan@acox1-desk.ger.corp.intel.com>
Date: Mon May 12 16:55:35 2014 +0100
goldfish: Allow 64bit builds
We can now enable the 64bit option for the Goldfish 64bit emulator.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8658bc81089d656fe54b12e21f0cae5116b6483
Author: Jun Tian <jun.j.tian@intel.com>
Date: Mon May 12 16:55:26 2014 +0100
goldfish: enable 64-bit tty driver
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec5e34c074793a1f80faaf75e9468dd2f39ec1dc
Author: Nick Kralevich <nnk@google.com>
Date: Mon May 12 16:55:16 2014 +0100
goldfish_nand.c: remove length restrictions
Remove limitations on the size of a read / write request.
AFAIK, there's no consequence to allowing the upper layers
to specify different read / write sizes.
This is needed to support running ext4 on goldfish.
Bug: https://code.google.com/p/android/issues/detail?id=38561
Signed-off-by: Nick Kralevich <nnk@google.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f10d8434201859d5ad7f51032dcd2d0c09e85ee2
Author: Octavian Purdila <octavian.purdila@intel.com>
Date: Mon May 12 16:55:05 2014 +0100
goldfish: add support for 64bit to the virtual bus
This patchs adds a new register to pass the upper 32bits for the
device name address when running in 64bit mode.
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25c72c786cb571cfdf39a31f9f64d143d8623a7a
Author: Jun Tian <jun.j.tian@intel.com>
Date: Mon May 12 16:54:57 2014 +0100
goldfish: fix kernel panic when using multiple adb connection
When using multiple adb on 64 bit kernel to transfer data,
the goldfish pipe interrupt will crash the kernel.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 49a75c444fcf07fdde2ec74428b6b1b9ff1c6b15
Author: Jun Tian <jun.j.tian@intel.com>
Date: Mon May 12 16:54:46 2014 +0100
goldfish: 64-bit pipe driver for goldfish platform
Support 64-bit channel and address for the goldfish pipe driver.
Signed-off-by: Jun Tian <jun.j.tian@intel.com>
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Brian Wood <brian.j.wood@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0cc6c3ab3cdbcf8a4a103d27599a6d0b44a6c315
Author: Christian Engelmayer <cengelma@gmx.at>
Date: Wed May 7 21:21:58 2014 +0200
staging: rtl8723au: Remove unused pointer in rtw_wdev_free()
Pointer 'pwdev_priv' in function rtw_wdev_free() is unused - thus remove it.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b16be76f926ff177cb9884be4cd62580c820420b
Author: Doug Anderson <dianders@chromium.org>
Date: Fri May 16 05:16:14 2014 +0900
ARM: dts: add tps65090 power regulator for exynos5250-snow
Added TPS65090 regulator related nodes to Snow board.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
commit ecad159a24e587c9f315e561fb509fe1cd9b54ba
Author: Doug Anderson <dianders@chromium.org>
Date: Fri May 16 05:16:11 2014 +0900
ARM: dts: add pinctrl for EC irq of exynos5250-snow
Added pinctrl node for embedded controller (EC) IRQ
on Snow board.
Signed-off-by: Doug Anderson <dianders@c…
ddstreet
referenced
this pull request
in ddstreet/linux
May 28, 2014
GIT fba69f042ad99f68c0268ef1c012f3199f898fac
commit f5c16f29bf5e57ba4051fc7785ba7f035f798c71
Author: Tejun Heo <tj@kernel.org>
Date: Mon May 19 15:52:10 2014 -0400
sysfs: make sure read buffer is zeroed
13c589d5b0ac ("sysfs: use seq_file when reading regular files")
switched sysfs from custom read implementation to seq_file to enable
later transition to kernfs. After the change, the buffer passed to
->show() is acquired through seq_get_buf(); unfortunately, this
introduces a subtle behavior change. Before the commit, the buffer
passed to ->show() was always zero as it was allocated using
get_zeroed_page(). Because seq_file doesn't clear buffers on
allocation and neither does seq_get_buf(), after the commit, depending
on the behavior of ->show(), we may end up exposing uninitialized data
to userland thus possibly altering userland visible behavior and
leaking information.
Fix it by explicitly clearing the buffer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Ron <ron@debian.org>
Fixes: 13c589d5b0ac ("sysfs: use seq_file when reading regular files")
Cc: stable <stable@vger.kernel.org> # 3.13+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3685f2516116c5f3b9d498d531955ad70216ad84
Author: Shawn Guo <shawn.guo@freescale.com>
Date: Sat May 17 20:46:01 2014 +0800
ahci: imx: PLL clock needs 100us to settle down
The commit e783c51 (ahci: imx: software workaround for phy reset issue
in resume) calls imx_sata_phy_reset() to reset phy immediately after
SATA MPLL is enabled. It seems working fine mostly, but fails in some
case as below.
...
ahci-imx 2200000.sata: failed to reset phy: -110
ahci-imx: probe of 2200000.sata failed with error -110
After talking to the designer, we learnt that when enabling i.MX6Q SATA
MPLL, we need to wait 100us for it to settle down for safety. Add this
required delay to fix above failure.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit d0b4cc4e32705ff00d90d32da7783c266c702c04
Author: Gavin Shan <gwshan@linux.vnet.ibm.com>
Date: Mon May 19 13:06:46 2014 +1000
PCI: Wrong register used to check pending traffic
The incorrect register offset is passed to pci_wait_for_pending(), which is
caused by commit 157e876ffe ("PCI: Add pci_wait_for_pending() (refactor
pci_wait_for_pending_transaction())").
Fixes: 157e876ffe ("PCI: Add pci_wait_for_pending() (refactor pci_wait_for_pending_transaction())
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Williamson <alex.williamson@gmail.com>
CC: stable@vger.kernel.org # v3.14+
commit 1e1110c43b1cda9fe77fc4a04835e460550e6b3c
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Sat May 17 06:49:22 2014 -0400
target: fix memory leak on XCOPY
On each processed XCOPY command, two "kmalloc-512" memory objects are
leaked. These represent two allocations of struct xcopy_pt_cmd in
target_core_xcopy.c.
The reason for the memory leak is that the cmd_kref field is not
initialized (thus, it is zero because the allocations were done with
kzalloc). When we decrement zero kref in target_put_sess_cmd, the result
is not zero, thus target_release_cmd_kref is not called.
This patch fixes the bug by moving kref initialization from
target_get_sess_cmd to transport_init_se_cmd (this function is called from
target_core_xcopy.c, so it will correctly initialize cmd_kref). It can be
easily verified that all code that calls target_get_sess_cmd also calls
transport_init_se_cmd earlier, thus moving kref_init shouldn't introduce
any new problems.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit f9c6d4987b23e0a514464bae6771933a48e4cd01
Author: Theodore Ts'o <tytso@mit.edu>
Date: Fri May 16 21:40:41 2014 -0400
random: fix BUG_ON caused by accounting simplification
Commit ee1de406ba6eb1 ("random: simplify accounting logic") simplified
things too much, in that it allows the following to trigger an
overflow that results in a BUG_ON crash:
dd if=/dev/urandom of=/dev/zero bs=67108707 count=1
Thanks to Peter Zihlstra for discovering the crash, and Hannes
Frederic for analyizing the root cause.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Greg Price <price@mit.edu>
commit d2c834abe2b39a2d5a6c38ef44de87c97cbb34b4
Author: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Date: Fri May 16 16:50:20 2014 +0300
clk: tegra: Fix wrong value written to PLLE_AUX
The value written to PLLE_AUX was incorrect due to a wrong variable
being used. Without this fix SATA does not work.
Cc: stable@vger.kernel.org
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Tested-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
[mturquette@linaro.org: improved changelog]
commit bb4e506565cfc0a2f534dfda1fb7ca5c26f7a604
Author: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Fri May 16 22:59:18 2014 +0200
staging: rtl8723au: Do not reset wdev->iftype in netdev_close()
wdev->ifdev should be set by .change_virtual_intf(). This solves the
problem of WARN() messages on module unload.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07d1d29ee1e194b932328ad2dc1d40297062ab7f
Author: Hans de Goede <hdegoede@redhat.com>
Date: Fri May 16 21:10:41 2014 +0200
ACPI / video: Revert native brightness quirk for ThinkPad T530
Seems it helps some users, but causes issues for other users:
https://bugzilla.redhat.com/show_bug.cgi?id=1089545
So lets drop it for now until we've figured out a better fix.
Fixes: 43d949024425 (ACPI / video: Add use_native_backlight quirks for more systems)
References: https://bugzilla.redhat.com/show_bug.cgi?id=1089545
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit be02f259fda66bcfc60ecd78a819e1ce28c8bfb9
Author: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Fri May 16 10:05:04 2014 +0200
staging: rtl8723au: Use correct pipe type for USB interrupts
Use a correct pipe type when filling un interrupt urbs. This should
finally take care of the WARN() messages on the console when USB urbs
are submitted.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4797ec2dc83a43be35bad56037d1b53db9e2b5d5
Author: Mark Salter <msalter@redhat.com>
Date: Thu May 15 15:19:22 2014 +0100
arm64: fix pud_huge() for 2-level pagetables
The following happens when trying to run a kvm guest on a kernel
configured for 64k pages. This doesn't happen with 4k pages:
BUG: failure at include/linux/mm.h:297/put_page_testzero()!
Kernel panic - not syncing: BUG!
CPU: 2 PID: 4228 Comm: qemu-system-aar Tainted: GF 3.13.0-0.rc7.31.sa2.k32v1.aarch64.debug #1
Call trace:
[<fffffe0000096034>] dump_backtrace+0x0/0x16c
[<fffffe00000961b4>] show_stack+0x14/0x1c
[<fffffe000066e648>] dump_stack+0x84/0xb0
[<fffffe0000668678>] panic+0xf4/0x220
[<fffffe000018ec78>] free_reserved_area+0x0/0x110
[<fffffe000018edd8>] free_pages+0x50/0x88
[<fffffe00000a759c>] kvm_free_stage2_pgd+0x30/0x40
[<fffffe00000a5354>] kvm_arch_destroy_vm+0x18/0x44
[<fffffe00000a1854>] kvm_put_kvm+0xf0/0x184
[<fffffe00000a1938>] kvm_vm_release+0x10/0x1c
[<fffffe00001edc1c>] __fput+0xb0/0x288
[<fffffe00001ede4c>] ____fput+0xc/0x14
[<fffffe00000d5a2c>] task_work_run+0xa8/0x11c
[<fffffe0000095c14>] do_notify_resume+0x54/0x58
In arch/arm/kvm/mmu.c:unmap_range(), we end up doing an extra put_page()
on the stage2 pgd which leads to the BUG in put_page_testzero(). This
happens because a pud_huge() test in unmap_range() returns true when it
should always be false with 2-level pages tables used by 64k pages.
This patch removes support for huge puds if 2-level pagetables are
being used.
Signed-off-by: Mark Salter <msalter@redhat.com>
[catalin.marinas@arm.com: removed #ifndef around PUD_SIZE check]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@vger.kernel.org> # v3.11+
commit dfc44f8030653b345fc6fb337558c3a07536823f
Author: Leif Lindholm <leif.lindholm@linaro.org>
Date: Thu Apr 17 18:42:00 2014 +0100
mips: dts: Fix missing device_type="memory" property in memory nodes
A few platforms lack a 'device_type = "memory"' for their memory
nodes, relying on an old ppc quirk in order to discover its memory.
Add the missing data so that all parsing code can find memory nodes
correctly.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
commit bfaed5abad998bfc88a66e6e71c7b08dcf82f04e
Author: Leif Lindholm <leif.lindholm@linaro.org>
Date: Thu Apr 17 18:41:59 2014 +0100
arm: dts: Fix missing device_type="memory" for ste-ccu8540
The current .dts for ste-ccu8540 lacks a 'device_type = "memory"' for
its memory node, relying on an old ppc quirk in order to discover its
memory. Fix the data so that all parsing code can handle it correctly.
Signed-off-by: Leif Lindholm <leif.lindholm@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
commit 07b8dae38b09bcfede7e726f172e39b5ce8390d9
Author: Andy Grover <agrover@redhat.com>
Date: Wed May 14 15:48:06 2014 -0700
target: Don't allow setting WC emulation if device doesn't support
Just like for pSCSI, if the transport sets get_write_cache, then it is
not valid to enable write cache emulation for it. Return an error.
see https://bugzilla.redhat.com/show_bug.cgi?id=1082675
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 52d0aa7980cfee85c831b2969e659055395386d4
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Wed May 14 20:54:26 2014 +0000
iscsi-target: Disable Immediate + Unsolicited Data with ISER Protection
This patch explicitly disables Immediate + Unsolicited Data for ISER
connections during login in iscsi_login_zero_tsih_s2() when protection
has been enabled for the session by the underlying hardware.
This is currently required because protection / signature memory regions
(MRs) expect T10 PI to occur on RDMA READs + RDMA WRITEs transfers, and
not on a immediate data payload associated with ISCSI_OP_SCSI_CMD, or
unsolicited data-out associated with a ISCSI_OP_SCSI_DATA_OUT.
v2 changes:
- Add TARGET_PROT_DOUT_INSERT check (Sagi)
- Add pr_debug noisemaker (Sagi)
- Add goto to avoid early return from MRDSL check (nab)
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit ed8ec8f707ed4760c124d47b27c93df8ec5b1eba
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Mon May 12 12:18:32 2014 -0700
tcm_fc: Fix free-after-use regression in ft_free_cmd
This patch fixes a free-after-use regression in ft_free_cmd(), where
ft_sess_put() is called with cmd->sess after percpu_ida_free() has
already released the tag.
Fix this bug by saving the ft_sess pointer ahead of percpu_ida_free(),
and pass it directly to ft_sess_put().
The regression was originally introduced in v3.13-rc1 commit:
commit 5f544cfac956971099e906f94568bc3fd1a7108a
Author: Nicholas Bellinger <nab@daterainc.com>
Date: Mon Sep 23 12:12:42 2013 -0700
tcm_fc: Convert to per-cpu command map pre-allocation of ft_cmd
Reported-by: Jun Wu <jwu@stormojo.com>
Cc: Mark Rustad <mark.d.rustad@intel.com>
Cc: Robert Love <robert.w.love@intel.com>
Cc: <stable@vger.kernel.org> #3.13+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 7cbfcc953789ff864c2bf8365a82a3fba4869649
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Thu May 1 13:44:56 2014 -0700
iscsi-target: Change BUG_ON to REJECT in iscsit_process_nop_out
This patch changes an incorrect use of BUG_ON to instead generate a
REJECT + PROTOCOL_ERROR in iscsit_process_nop_out() code. This case
can occur with traditional TCP where a flood of zeros in the data
stream can reach this block for what is presumed to be a NOP-OUT with
a solicited reply, but without a valid iscsi_cmd pointer.
This incorrect BUG_ON was introduced during the v3.11-rc timeframe
with the following commit:
commit 778de368964c5b7e8100cde9f549992d521e9c89
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Fri Jun 14 16:07:47 2013 -0700
iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handling
Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com>
Cc: stable@vger.kernel.org # 3.11+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 14f4b54fe38f3a8f8392a50b951c8aa43b63687a
Author: Sagi Grimberg <sagig@mellanox.com>
Date: Tue Apr 29 13:13:47 2014 +0300
Target/iscsi,iser: Avoid accepting transport connections during stop stage
When the target is in stop stage, iSER transport initiates RDMA disconnects.
The iSER initiator may wish to establish a new connection over the
still existing network portal. In this case iSER transport should not
accept and resume new RDMA connections. In order to learn that, iscsi_np
is added with enabled flag so the iSER transport can check when deciding
weather to accept and resume a new connection request.
The iscsi_np is enabled after successful transport setup, and disabled
before iscsi_np login threads are cleaned up.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 531b7bf4bd795d9a09eac92504322a472c010bc8
Author: Sagi Grimberg <sagig@mellanox.com>
Date: Tue Apr 29 13:13:45 2014 +0300
Target/iser: Fix iscsit_accept_np and rdma_cm racy flow
RDMA CM and iSCSI target flows are asynchronous and completely
uncorrelated. Relying on the fact that iscsi_accept_np will be called
after CM connection request event and will wait for it is a mistake.
When attempting to login to a few targets this flow is racy and
unpredictable, but for parallel login to dozens of targets will
race and hang every time.
The correct synchronizing mechanism in this case is pending on
a semaphore rather than a wait_for_event. We keep the pending
interruptible for iscsi_np cleanup stage.
(Squash patch to remove dead code into parent - nab)
Reported-by: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 9fe63c88b1d59f1ce054d6948ccd3096496ecedb
Author: Sagi Grimberg <sagig@mellanox.com>
Date: Tue Apr 29 13:13:44 2014 +0300
Target/iser: Fix wrong connection requests list addition
Should be adding list_add_tail($new, $head) and not
the other way around.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 448ba904160f9d8f69217c28a1692cee5afbff88
Author: Andy Grover <agrover@redhat.com>
Date: Tue Apr 15 14:13:12 2014 -0700
target: Allow non-supporting backends to set pi_prot_type to 0
Userspace tools assume if a value is read from configfs, it is valid
and will not cause an error if the same value is written back. The only
valid value for pi_prot_type for backends not supporting DIF is 0, so allow
this particular value to be set without returning an error.
Reported-by: Krzysztof Chojnowski <frirajder@gmail.com>
Signed-off-by: Andy Grover <agrover@redhat.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit c776cd89fc705fc8b5c2e5ad906bf5d791620fed
Author: John David Anglin <dave.anglin@bell.net>
Date: Sun May 11 18:40:50 2014 -0400
parisc: Improve LWS-CAS performance
The attached change significantly improves the performance of the LWS-CAS code
in syscall.S.
This allows a number of packages to build (e.g., zeromq3, gtest and libxs)
that previously failed because slow LWS-CAS performance under contention. In
particular, interrupts taken while the lock was taken degraded performance
significantly.
The change does the following:
1) Disables interrupts around the CAS operation, and
2) Changes the loads and stores to use the ordered completer, "o", on
PA 2.0. "o" and "ma" with a zero offset are equivalent. The latter is
accepted on both PA 1.X and 2.0.
The use of ordered loads and stores probably makes no difference on all
existing hardware, but it seemed pedantically correct. In particular, the CAS
operation must complete before LDCW lock is released. As written before, a
processor could reorder the operations.
I don't believe the period interrupts are disabled is long enough to
significantly increase interrupt latency. For example, the TLB insert code is
longer. Worst case is a memory fault in the CAS operation.
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 3.13+
Signed-off-by: Helge Deller <deller@gmx.de>
commit fef47e2a2e1e75fe50a10f634a80f16808348cc6
Author: Helge Deller <deller@gmx.de>
Date: Mon May 5 18:07:12 2014 +0200
parisc: ratelimit userspace segfault printing
Ratelimit printing of userspace segfaults and make it runtime
configurable via the /proc/sys/debug/exception-trace variable. This
should resolve syslog from growing way too fast and thus prevents
possible system service attacks.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 3.13+
commit 93fa9d32670f5592c8e56abc9928fc194e1e72fc
Author: Marcel Apfelbaum <marcel.a@redhat.com>
Date: Thu May 15 12:42:49 2014 -0600
PCI: shpchp: Check bridge's secondary (not primary) bus speed
When a new device is added below a hotplug bridge, the bridge's secondary
bus speed and the device's bus speed must match. The shpchp driver
previously checked the bridge's *primary* bus speed, not the secondary bus
speed.
This caused hot-add errors like:
shpchp 0000:00:03.0: Speed of bus ff and adapter 0 mismatch
Check the secondary bus speed instead.
[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=75251
Fixes: 3749c51ac6c1 ("PCI: Make current and maximum bus speeds part of the PCI core")
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: stable@vger.kernel.org # v2.6.34+
commit 4c358e15553ed88bf2ddae422624624e1dd663d1
Author: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Thu May 15 14:44:30 2014 +1000
of: fix CONFIG_OF=n prototype of of_node_full_name()
Make the CONFIG_OF=n prototpe of of_node_full_name() mateh the CONFIG_OF=y
version.
Fixes compile warnings like this:
sound/soc/soc-core.c: In function 'soc_check_aux_dev':
sound/soc/soc-core.c:1667:3: warning: passing argument 1 of 'of_node_full_name' discards 'const' qualifier from pointer target type [enabled by default]
codecname = of_node_full_name(aux_dev->codec_of_node);
when CONFIG_OF is not defined.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
commit e95a2f7509f5219177d6821a0a8754f93892ca56
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Thu May 8 15:09:19 2014 +0300
drm/i915: Increase WM memory latency values on SNB
On SNB the BIOS provided WM memory latency values seem insufficient to
handle high resolution displays.
In this particular case the display mode was a 2560x1440@60Hz, which
makes the pixel clock 241.5 MHz. It was empirically found that a memory
latency value if 1.2 usec is enough to avoid underruns, whereas the BIOS
provided value of 0.7 usec was clearly too low. Incidentally 1.2 usec
is what the typical BIOS provided values are on IVB systems.
Increase the WM memory latency values to at least 1.2 usec on SNB.
Hopefully this won't have a significant effect on power consumption.
v2: Increase the latency values regardless of the pixel clock
Cc: Robert N <crshman@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70254
Tested-by: Robert Navarro <crshman@gmail.com>
Tested-by: Vitaly Minko <vitaly.minko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit 721e82c08c1afd6b47367b0e0c4a62140b0667f3
Author: Aaron Lu <aaron.lu@intel.com>
Date: Mon May 12 16:55:45 2014 +0800
drm/i915: restore backlight precision when converting from ACPI
When we set backlight on behalf of ACPI opregion, we will convert the
backlight value in the 0-255 range defined in opregion to the actual
hardware level. Commit 22505b82a2 (drm/i915: avoid brightness overflow
when doing scale) is meant to fix the overflow problem when doing the
conversion, but it also caused a problem that the converted hardware
level doesn't quite represent the intended value: say user wants maximum
backlight level(255 in opregion's range), then we will calculate the
actual hardware level to be: level = freq / max * level, where freq is
the hardware's max backlight level(937 on an user's box), and max and
level are all 255. The converted value should be 937 but the above
calculation will yield 765.
To fix this issue, just use 64 bits to do the calculation to keep the
precision and avoid overflow at the same time.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=72491
Reported-by: Nico Schottelius <nico-bugzilla.kernel.org@schottelius.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit afba0b5a221c0dacbbdf3a778d539fbc90fc6191
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue May 13 16:07:37 2014 +0100
drm/i915: Use the first mode if there is no preferred mode in the EDID
This matches the algorithm used by earlier kernels when selecting the
mode for the fbcon. And only if there is no modes at all, do we fall
back to using the BIOS configuration. Seamless transition is still
preserved (from the BIOS configuration to ours) so long as the BIOS has
also chosen what we hope is the native configuration.
Reported-by: Knut Petersen <Knut_Petersen@t-online.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78655
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Knut Petersen <Knut_Petersen@t-online.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[Jani: applied Chris' "Please imagine that I wrote this correctly."]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit f4cdbc21444a45d207a8dc175f44d2facfbd0845
Author: Jani Nikula <jani.nikula@intel.com>
Date: Wed May 14 13:02:19 2014 +0300
drm/i915/dp: force eDP lane count to max available lanes on BDW
There are certain BDW high res eDP machines that regressed due to
commit 38aecea0ccbb909d635619cba22f1891e589b434
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Mon Mar 3 11:18:10 2014 +0100
drm/i915: reverse dp link param selection, prefer fast over wide again
The commit lead to 2 lanes at 5.4 Gbps being used instead of 4 lanes at
2.7 Gbps on the affected machines. Link training succeeded for both, but
the screen remained blank with the former config. Further investigation
showed that 4 lanes at 5.4 Gbps worked also.
The root cause for the blank screen using 2 lanes remains unknown, but
apparently the driver for a certain other operating system by default
uses the max available lanes. Follow suit on Broadwell eDP, for at least
until we figure out what is going on.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76711
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
commit fa81511bb0bbb2b1aace3695ce869da9762624ff
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Wed May 14 16:33:54 2014 -0700
x86-64, modify_ldt: Make support for 16-bit segments a runtime option
Checkin:
b3b42ac2cbae x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels
disabled 16-bit segments on 64-bit kernels due to an information
leak. However, it does seem that people are genuinely using Wine to
run old 16-bit Windows programs on Linux.
A proper fix for this ("espfix64") is coming in the upcoming merge
window, but as a temporary fix, create a sysctl to allow the
administrator to re-enable support for 16-bit segments.
It adds a "/proc/sys/abi/ldt16" sysctl that defaults to zero (off). If
you hit this issue and care about your old Windows program more than
you care about a kernel stack address information leak, you can do
echo 1 > /proc/sys/abi/ldt16
as root (add it to your startup scripts), and you should be ok.
The sysctl table is only added if you have COMPAT support enabled on
x86-64, but I assume anybody who runs old windows binaries very much
does that ;)
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/CA%2B55aFw9BPoD10U1LfHbOMpHWZkvJTkMcfCs9s3urPr1YyWBxw@mail.gmail.com
Cc: <stable@vger.kernel.org>
commit ffe6902b66aaa4ca6694bc19639259c16d84ddb1
Author: James Hogan <james.hogan@imgtec.com>
Date: Thu May 1 15:05:07 2014 +0100
asm-generic: remove _STK_LIM_MAX
_STK_LIM_MAX could be used to override the RLIMIT_STACK hard limit from
an arch's include/uapi/asm-generic/resource.h file, but is no longer
used since both parisc and metag removed the override. Therefore remove
it entirely, setting the hard RLIMIT_STACK limit to RLIM_INFINITY
directly in include/asm-generic/resource.h.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: John David Anglin <dave.anglin@bell.net>
commit c70458f50cd4271410aa75011f56ffabc0e2d34a
Author: James Hogan <james.hogan@imgtec.com>
Date: Thu May 1 12:31:14 2014 +0100
metag: Remove _STK_LIM_MAX override
Meta overrode _STK_LIM_MAX (the default RLIMIT_STACK hard limit) to
256MB, apparently in an attempt to prevent setup_arg_pages's
STACK_GROWSUP code from choosing the maximum stack size of 1GB, which is
far too large for Meta's limited virtual address space and hits a BUG_ON
(stack_top is usually 0x3ffff000).
However the commit "metag: Reduce maximum stack size to 256MB" reduces
the absolute stack size limit to a safe value for metag. This allows the
default _STK_LIM_MAX override to be removed, bringing the default
behaviour in line with all other architectures. Parisc in particular
recently removed their override of _STK_LIMT_MAX in commit e0d8898d76a7
(parisc: remove _STK_LIM_MAX override) since it subtly affects stack
allocation semantics in userland. Meta's uapi/asm/resource.h can now be
removed and switch to using generic-y.
Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
commit 042d27acb64924a0e8a43e972485913a32407beb
Author: Helge Deller <deller@gmx.de>
Date: Wed Apr 30 23:26:02 2014 +0200
parisc,metag: Do not hardcode maximum userspace stack size
This patch affects only architectures where the stack grows upwards
(currently parisc and metag only). On those do not hardcode the maximum
initial stack size to 1GB for 32-bit processes, but make it configurable
via a config option.
The main problem with the hardcoded stack size is, that we have two
memory regions which grow upwards: stack and heap. To keep most of the
memory available for heap in a flexmap memory layout, it makes no sense
to hard allocate up to 1GB of the memory for stack which can't be used
as heap then.
This patch makes the stack size for 32-bit processes configurable and
uses 80MB as default value which has been in use during the last few
years on parisc and which hasn't showed any problems yet.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
commit d71f290b4e98a39f49f2595a13be3b4d5ce8e1f1
Author: James Hogan <james.hogan@imgtec.com>
Date: Tue May 13 23:58:24 2014 +0100
metag: Reduce maximum stack size to 256MB
Specify the maximum stack size for arches where the stack grows upward
(parisc and metag) in asm/processor.h rather than hard coding in
fs/exec.c so that metag can specify a smaller value of 256MB rather than
1GB.
This fixes a BUG on metag if the RLIMIT_STACK hard limit is increased
beyond a safe value by root. E.g. when starting a process after running
"ulimit -H -s unlimited" it will then attempt to use a stack size of the
maximum 1GB which is far too big for metag's limited user virtual
address space (stack_top is usually 0x3ffff000):
BUG: failure at fs/exec.c:589/shift_arg_pages()!
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: linux-parisc@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Cc: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # only needed for >= v3.9 (arch/metag)
commit 2425ce84026c385b73ae72039f90d042d49e0394
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Thu May 8 15:51:37 2014 -0400
metag: fix memory barriers
Volatile access doesn't really imply the compiler barrier. Volatile access
is only ordered with respect to other volatile accesses, it isn't ordered
with respect to general memory accesses. Gcc may reorder memory accesses
around volatile access, as we can see in this simple example (if we
compile it with optimization, both increments of *b will be collapsed to
just one):
void fn(volatile int *a, long *b)
{
(*b)++;
*a = 10;
(*b)++;
}
Consequently, we need the compiler barrier after a write to the volatile
variable, to make sure that the compiler doesn't reorder the volatile
write with something else.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
commit 4cdd2ad78098244c1bc9ec4374ea1c225fd1cd6f
Author: Mike Snitzer <snitzer@redhat.com>
Date: Tue May 13 13:49:39 2014 -0400
dm mpath: fix lock order inconsistency in multipath_ioctl
Commit 3e9f1be1b40 ("dm mpath: remove process_queued_ios()") did not
consistently take the multipath device's spinlock (m->lock) before
calling dm_table_run_md_queue_async() -- which takes the q->queue_lock.
Found with code inspection using hint from reported lockdep warning.
Reported-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 85ad643b7e7e52d37620fb272a9fd577a8095647
Author: Joe Thornber <ejt@redhat.com>
Date: Fri May 9 15:59:38 2014 +0100
dm thin: add timeout to stop out-of-data-space mode holding IO forever
If the pool runs out of data space, dm-thin can be configured to
either error IOs that would trigger provisioning, or hold those IOs
until the pool is resized. Unfortunately, holding IOs until the pool is
resized can result in a cascade of tasks hitting the hung_task_timeout,
which may render the system unavailable.
Add a fixed timeout so IOs can only be held for a maximum of 60 seconds.
If LVM is going to resize a thin-pool that is out of data space it needs
to be prompt about it.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
commit 8d07e8a5f5bc7b90f755d9b427ea930024f4c986
Author: Joe Thornber <ejt@redhat.com>
Date: Tue May 6 16:28:14 2014 +0100
dm thin: allow metadata commit if pool is in PM_OUT_OF_DATA_SPACE mode
Commit 3e1a0699 ("dm thin: fix out of data space handling") introduced
a regression in the metadata commit() method by returning an error if
the pool is in PM_OUT_OF_DATA_SPACE mode. This oversight caused a thin
device to return errors even if the default queue_if_no_space ENOSPC
handling mode is used.
Fix commit() to only fail if pool is in PM_READ_ONLY or PM_FAIL mode.
Reported-by: qindehua@163.com
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
commit 610f2de3559c383caf8fbbf91e9968102dff7ca0
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Thu Feb 20 18:01:01 2014 -0500
dm crypt: fix cpu hotplug crash by removing per-cpu structure
The DM crypt target used per-cpu structures to hold pointers to a
ablkcipher_request structure. The code assumed that the work item keeps
executing on a single CPU, so it didn't use synchronization when
accessing this structure.
If a CPU is disabled by writing 0 to /sys/devices/system/cpu/cpu*/online,
the work item could be moved to another CPU. This causes dm-crypt
crashes, like the following, because the code starts using an incorrect
ablkcipher_request:
smpboot: CPU 7 is now offline
BUG: unable to handle kernel NULL pointer dereference at 0000000000000130
IP: [<ffffffffa1862b3d>] crypt_convert+0x12d/0x3c0 [dm_crypt]
...
Call Trace:
[<ffffffffa1864415>] ? kcryptd_crypt+0x305/0x470 [dm_crypt]
[<ffffffff81062060>] ? finish_task_switch+0x40/0xc0
[<ffffffff81052a28>] ? process_one_work+0x168/0x470
[<ffffffff8105366b>] ? worker_thread+0x10b/0x390
[<ffffffff81053560>] ? manage_workers.isra.26+0x290/0x290
[<ffffffff81058d9f>] ? kthread+0xaf/0xc0
[<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120
[<ffffffff813464ac>] ? ret_from_fork+0x7c/0xb0
[<ffffffff81058cf0>] ? kthread_create_on_node+0x120/0x120
Fix this bug by removing the per-cpu definition. The structure
ablkcipher_request is accessed via a pointer from convert_context.
Consequently, if the work item is rescheduled to a different CPU, the
thread still uses the same ablkcipher_request.
This change may undermine performance improvements intended by commit
c0297721 ("dm crypt: scale to multiple cpus") on select hardware. In
practice no performance difference was observed on recent hardware. But
regardless, correctness is more important than performance.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
commit d7653964c590ba846aa11a8f6edf409773cbc492
Author: Wolfram Sang <wsa+renesas@sang-engineering.com>
Date: Mon May 5 18:36:21 2014 +0200
i2c: rcar: bail out on zero length transfers
This hardware does not support zero length transfers. Instead, the
driver does one (random) byte transfers currently with undefined results
for the slaves. We now bail out.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
commit fa01d096bfcfd89398b1f3a3f91805dab76f7fe5
Author: Andy Gross <agross@codeaurora.org>
Date: Fri May 2 20:54:29 2014 -0500
i2c: qup: Fix pm_runtime_get_sync usage
This patch corrects the error check on the call to pm_runtime_get_sync.
Signed-off-by: Andy Gross <agross@codeaurora.org>
Reviewed-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
commit ce78cc071f5f541480e381cc0241d37590041a9d
Author: Olof Johansson <olof@lixom.net>
Date: Fri Apr 11 15:19:41 2014 -0700
i2c: s3c2410: resume race fix
Don't unmark the device as suspended until after it's been re-setup.
The main race would be w.r.t. an i2c driver that gets resumed at the same
time (asyncronously), that is allowed to do a transfer since suspended
is set to 0 before reinit, but really should have seen the -EIO return
instead.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
commit 37e5eb0bae7bb4d98c2153c3c3400b5c00c3cad1
Author: Ulf Hansson <ulf.hansson@linaro.org>
Date: Thu Apr 10 16:19:29 2014 +0200
i2c: nomadik: Don't use IS_ERR for devm_ioremap
devm_ioremap() returns NULL on error, not an error.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
commit 47bb27e78867997040a228328f2a631c3c7f2c82
Author: Du, Wenkai <wenkai.du@intel.com>
Date: Thu Apr 10 23:03:19 2014 +0000
i2c: designware: Mask all interrupts during i2c controller enable
There have been "i2c_designware 80860F41:00: controller timed out" errors
on a number of Baytrail platforms. The issue is caused by incorrect value in
Interrupt Mask Register (DW_IC_INTR_MASK) when i2c core is being enabled.
This causes call to __i2c_dw_enable() to immediately start the transfer which
leads to timeout. There are 3 failure modes observed:
1. Failure in S0 to S3 resume path
The default value after reset for DW_IC_INTR_MASK is 0x8ff. When we start
the first transaction after resuming from system sleep, TX_EMPTY interrupt
is already unmasked because of the hardware default.
2. Failure in normal operational path
This failure happens rarely and is hard to reproduce. Debug trace showed that
DW_IC_INTR_MASK had value of 0x254 when failure occurred, which meant
TX_EMPTY was unmasked.
3. Failure in S3 to S0 suspend path
This failure also happens rarely and is hard to reproduce. Adding debug trace
that read DW_IC_INTR_MASK made this failure not reproducible. But from ISR
call trace we could conclude TX_EMPTY was unmasked when problem occurred.
The patch masks all interrupts before the controller is enabled to resolve the
faulty DW_IC_INTR_MASK conditions.
Signed-off-by: Wenkai Du <wenkai.du@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: improved the comment and removed typo in commit msg]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
commit 7bb394094080a26de06efcd6a870cb2ba21cfb16
Author: Steven J. Hill <Steven.Hill@imgtec.com>
Date: Thu Apr 10 14:06:17 2014 -0500
MIPS: mm: Fix broken microMIPS kernel regression.
Commit f4ae17aa0f2122b52f642985b46210a1f2eceb0a [MIPS: mm: Use scratch for
PGD when !CONFIG_MIPS_PGD_C0_CONTEXT] broke microMIPS kernel builds. This
patch refactors that code similar to what was done for the 'clear_page'
and 'copy_page' functions.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6744/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 665ebe926e7b714369b5329d48745bfef17db512
Author: Dan Carpenter <dan.carpenter@oracle.com>
Date: Wed May 14 16:32:21 2014 +0300
ALSA: sb_mixer: missing return statement
The if condition here was supposed to return on error but the return
statement is missing. The effect is that the ->mixername is set to
"???" instead of "DT019X".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit 582da6527da30f6e21a95c9f3f2810d46a8f406e
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Wed May 14 13:36:36 2014 +0200
of: make of_update_property() usable earlier in the boot process
Commit 75b57ecf9d1d1e17d099ab13b8f48e6e038676be ('of: Make device
nodes kobjects so they show up in sysfs') has turned Device Tree nodes
in kobjects and added a sysfs based representation for Device Tree
nodes. Since the sysfs logic is only available after the execution of
a core_initcall(), the patch took precautions in of_add_property() and
of_remove_property() to not do any sysfs related manipulation early in
the boot process.
However, it forgot to do the same for of_update_property(), which if
used early in the boot process (before core_initcalls have been
called), tries to call sysfs_remove_bin_file(), and crashes:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at /home/thomas/projets/linux-2.6/fs/kernfs/dir.c:1216 kernfs_remove_by_name_ns+0x80/0x88()
kernfs: can not remove '(null)', no directory
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc1-00127-g1d7e7b2-dirty #423
[<c0014910>] (unwind_backtrace) from [<c00110ec>] (show_stack+0x10/0x14)
[<c00110ec>] (show_stack) from [<c04c84b8>] (dump_stack+0x84/0x94)
[<c04c84b8>] (dump_stack) from [<c001d8c0>] (warn_slowpath_common+0x6c/0x88)
[<c001d8c0>] (warn_slowpath_common) from [<c001d90c>] (warn_slowpath_fmt+0x30/0x40)
[<c001d90c>] (warn_slowpath_fmt) from [<c0104468>] (kernfs_remove_by_name_ns+0x80/0x88)
[<c0104468>] (kernfs_remove_by_name_ns) from [<c0394d98>] (of_update_property+0xc0/0xf0)
[<c0394d98>] (of_update_property) from [<c0647248>] (mvebu_timer_and_clk_init+0xfc/0x194)
[<c0647248>] (mvebu_timer_and_clk_init) from [<c0640934>] (start_kernel+0x218/0x350)
[<c0640934>] (start_kernel) from [<00008070>] (0x8070)
---[ end trace 3406ff24bd97382e ]---
Unable to handle kernel NULL pointer dereference at virtual address 0000003c
pgd = c0004000
[0000003c] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.15.0-rc1-00127-g1d7e7b2-dirty #423
task: c10ad4d8 ti: c10a2000 task.ti: c10a2000
PC is at kernfs_find_ns+0x8/0xf0
LR is at kernfs_find_and_get_ns+0x30/0x48
pc : [<c0103834>] lr : [<c010394c>] psr: 600001d3
sp : c10a3f34 ip : 00000073 fp : 00000000
r10: 00000000 r9 : cfffc240 r8 : cfdf2980
r7 : cf812c00 r6 : 00000000 r5 : 00000000 r4 : c10b45e0
r3 : c10ad4d8 r2 : 00000000 r1 : cf812c00 r0 : 00000000
Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel
Control: 10c53c7d Table: 0000404a DAC: 00000015
Process swapper/0 (pid: 0, stack limit = 0xc10a2240)
Stack: (0xc10a3f34 to 0xc10a4000)
3f20: c10b45e0 00000000 00000000
3f40: cf812c00 c010394c 00000063 cf812c00 00000001 cf812c00 cfdf29ac c03932cc
3f60: 00000063 cf812bc0 cfdf29ac cf812c00 ffffffff c03943f8 cfdf2980 c0104468
3f80: cfdf2a04 cfdf2980 cf812bc0 c06634b0 c10aa3c0 c0394da4 c10f74dc cfdf2980
3fa0: cf812bc0 c0647248 c10aa3c0 ffffffff c10de940 c10aa3c0 ffffffff c0640934
3fc0: ffffffff ffffffff c06404ec 00000000 00000000 c06634b0 00000000 10c53c7d
3fe0: c10aa434 c06634ac c10ae4c8 0000406a 414fc091 00008070 00000000 00000000
[<c0103834>] (kernfs_find_ns) from [<00000001>] (0x1)
Code: e5c89001 eaffffcf e92d40f0 e1a06002 (e1d023bc)
---[ end trace 3406ff24bd97382f ]---
Kernel panic - not syncing: Attempted to kill the idle task!
---[ end Kernel panic - not syncing: Attempted to kill the idle task!
To fix this problem, we simply skip the sysfs related calls in
of_update_property(), and rely on of_init() to fix up things when it
will be called, exactly as is done in of_add_property() and
of_remove_property().
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes: 75b57ecf9d1d ("of: Make device nodes kobjects so they show up in sysfs")
Signed-off-by: Grant Likely <grant.likely@linaro.org>
commit f2d0801f00b7aff0ac6b3666cbcdab499267418a
Author: Markos Chandras <markos.chandras@imgtec.com>
Date: Tue Apr 22 15:40:36 2014 +0100
MIPS: Add new AUDIT_ARCH token for the N32 ABI on MIPS64
A MIPS64 kernel may support ELF files for all 3 MIPS ABIs
(O32, N32, N64). Furthermore, the AUDIT_ARCH_MIPS{,EL}64 token
does not provide enough information about the ABI for the 64-bit
process. As a result of which, userland needs to use complex
seccomp filters to decide whether a syscall belongs to the o32 or n32
or n64 ABI. Therefore, a new arch token for MIPS64/n32 is added so it
can be used by seccomp to explicitely set syscall filters for this ABI.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Eric Paris <eparis@redhat.com>
Acked-by: Paul Moore <pmoore@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: linux-mips@linux-mips.org
Link: http://sourceforge.net/p/libseccomp/mailman/message/32239040/
Patchwork: https://patchwork.linux-mips.org/patch/6818/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit 9844f5462392b53824e8b86726e7c33b5ecbb676
Author: Anthony Iliopoulos <anthony.iliopoulos@huawei.com>
Date: Wed May 14 11:29:48 2014 +0200
x86, mm, hugetlb: Add missing TLB page invalidation for hugetlb_cow()
The invalidation is required in order to maintain proper semantics
under CoW conditions. In scenarios where a process clones several
threads, a thread operating on a core whose DTLB entry for a
particular hugepage has not been invalidated, will be reading from
the hugepage that belongs to the forked child process, even after
hugetlb_cow().
The thread will not see the updated page as long as the stale DTLB
entry remains cached, the thread attempts to write into the page,
the child process exits, or the thread gets migrated to a different
processor.
Signed-off-by: Anthony Iliopoulos <anthony.iliopoulos@huawei.com>
Link: http://lkml.kernel.org/r/20140514092948.GA17391@server-36.huawei.corp
Suggested-by: Shay Goikhman <shay.goikhman@huawei.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: <stable@vger.kernel.org> # v2.6.16+ (!)
commit 97d9d23dda6f37d90aefeec4ed619d52df525382
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Sat Apr 26 12:51:31 2014 -0300
[media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode
If a struct contains 64-bit fields, it is aligned on 64-bit boundaries
within containing structs in 64-bit compilations. This is the case with
struct v4l2_window, which contains pointers and is embedded into struct
v4l2_format, and that one is embedded into struct v4l2_create_buffers.
Unlike some other structs, used as a part of the kernel ABI as ioctl()
arguments, that are packed, these structs aren't packed. This isn't a
problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains
a bug, that triggers in such 64-bit builds. That code wrongly assumes,
that in struct v4l2_create_buffers, struct v4l2_format immediately follows
the __u32 memory field, which in fact isn't the case. This bug wasn't
visible until now, because until recently hardly any applications used
this ioctl() and mostly embedded 32-bit only drivers implemented it. This
is changing now with addition of this ioctl() to some USB drivers, e.g.
UVC. This patch fixes the bug by copying parts of struct
v4l2_create_buffers separately.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Cc: stable@vger.kernel.org
commit cfece5857ca51d1dcdb157017aba226f594e9dcf
Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Date: Mon Apr 14 10:49:34 2014 -0300
[media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space
Commit 75e2bdad8901a0b599e01a96229be922eef1e488 "ov7670: allow
configuration of image size, clock speed, and I/O method" uses a wrong
index to iterate an array. Apart from being wrong, it also uses an
unchecked value from user-space, which can cause access to unmapped
memory in the kernel, triggered by a normal desktop user with rights to
use V4L2 devices.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
commit 2ed9fd28c2884e9f41c133f86a7e377d7c0a96bf
Author: Jason Cooper <jason@lakedaemon.net>
Date: Tue May 13 18:47:01 2014 +0000
MAINTAINERS: Add co-maintainer for drivers/irqchip
Thomas Gleixner has asked me to assist with the review and merging of
patches for the irqchip subsystem.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1400006821-32145-1-git-send-email-jason@lakedaemon.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
commit 44330ab516c15dda8a1e660eeaf0003f84e43e3f
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Tue May 13 13:45:15 2014 +0100
ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile
The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.
To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.
Reported-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
commit cffd6665f57ed18f4be9185c4330c8c98c22e201
Author: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Date: Tue May 13 15:46:06 2014 +0300
ASoC: Intel: Fix Baytrail SST DSP firmware loading
Commit 10df350977b1 ("ASoC: Intel: Fix Audio DSP usage when IOMMU is
enabled.") caused following regression in Baytrail SST:
baytrail-pcm-audio baytrail-pcm-audio: error: DMA alloc failed
baytrail-pcm-audio baytrail-pcm-audio: error: failed to load firmware
Fix this by calling dma_coerce_mask_and_coherent() in sst_byt_init() with
the same dma_dev device what is now used in sst_fw_new() when allocating the
DMA buffer.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 367f0b50e502d2c384277ba2ed43b04add2b8b6f
Author: Ralf Baechle <ralf@linux-mips.org>
Date: Tue May 13 17:56:41 2014 +0200
MIPS: Wire up renameat2 syscall.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
commit d40a63c45b506b0681918d7c62a15cc9d48c8681
Author: Dirk Brandewie <dirk.j.brandewie@intel.com>
Date: Thu May 8 12:57:24 2014 -0700
intel_pstate: remove setting P state to MAX on init
Setting the P state of the core to max at init time is a hold over
from early implementation of intel_pstate where intel_pstate disabled
cpufreq and loaded VERY early in the boot sequence. This was to
ensure that intel_pstate did not affect boot time. This in not needed
now that intel_pstate is a cpufreq driver.
Removing this covers the case where a CPU has gone through a manual
CPU offline/online cycle and the P state is set to MAX on init and the
CPU immediately goes idle. Due to HW coordination the P state request
on the idle CPU will drag all cores to MAX P state until the load is
reevaluated when to core goes non-idle.
Reported-by: Patrick Marlier <patrick.marlier@gmail.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 36e9d2ebcc15d029b33f42a36146ab5a5bcfcfe7
Author: Tejun Heo <tj@kernel.org>
Date: Tue May 13 11:28:30 2014 -0400
cgroup: fix rcu_read_lock() leak in update_if_frozen()
While updating cgroup_freezer locking, 68fafb77d827 ("cgroup_freezer:
replace freezer->lock with freezer_mutex") introduced a bug in
update_if_frozen() where it returns with rcu_read_lock() held. Fix it
by adding rcu_read_unlock() before returning.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
commit e5ced8ebb10c20a3b349bd798b69ccabd3b25d21
Author: Tejun Heo <tj@kernel.org>
Date: Wed May 7 21:31:17 2014 -0400
cgroup_freezer: replace freezer->lock with freezer_mutex
After 96d365e0b86e ("cgroup: make css_set_lock a rwsem and rename it
to css_set_rwsem"), css task iterators requires sleepable context as
it may block on css_set_rwsem. I missed that cgroup_freezer was
iterating tasks under IRQ-safe spinlock freezer->lock. This leads to
errors like the following on freezer state reads and transitions.
BUG: sleeping function called from invalid context at /work
/os/work/kernel/locking/rwsem.c:20
in_atomic(): 0, irqs_disabled(): 0, pid: 462, name: bash
5 locks held by bash/462:
#0: (sb_writers#7){.+.+.+}, at: [<ffffffff811f0843>] vfs_write+0x1a3/0x1c0
#1: (&of->mutex){+.+.+.}, at: [<ffffffff8126d78b>] kernfs_fop_write+0xbb/0x170
#2: (s_active#70){.+.+.+}, at: [<ffffffff8126d793>] kernfs_fop_write+0xc3/0x170
#3: (freezer_mutex){+.+...}, at: [<ffffffff81135981>] freezer_write+0x61/0x1e0
#4: (rcu_read_lock){......}, at: [<ffffffff81135973>] freezer_write+0x53/0x1e0
Preemption disabled at:[<ffffffff81104404>] console_unlock+0x1e4/0x460
CPU: 3 PID: 462 Comm: bash Not tainted 3.15.0-rc1-work+ #10
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
ffff88000916a6d0 ffff88000e0a3da0 ffffffff81cf8c96 0000000000000000
ffff88000e0a3dc8 ffffffff810cf4f2 ffffffff82388040 ffff880013aaf740
0000000000000002 ffff88000e0a3de8 ffffffff81d05974 0000000000000246
Call Trace:
[<ffffffff81cf8c96>] dump_stack+0x4e/0x7a
[<ffffffff810cf4f2>] __might_sleep+0x162/0x260
[<ffffffff81d05974>] down_read+0x24/0x60
[<ffffffff81133e87>] css_task_iter_start+0x27/0x70
[<ffffffff8113584d>] freezer_apply_state+0x5d/0x130
[<ffffffff81135a16>] freezer_write+0xf6/0x1e0
[<ffffffff8112eb88>] cgroup_file_write+0xd8/0x230
[<ffffffff8126d7b7>] kernfs_fop_write+0xe7/0x170
[<ffffffff811f0756>] vfs_write+0xb6/0x1c0
[<ffffffff811f121d>] SyS_write+0x4d/0xc0
[<ffffffff81d08292>] system_call_fastpath+0x16/0x1b
freezer->lock used to be used in hot paths but that time is long gone
and there's no reason for the lock to be IRQ-safe spinlock or even
per-cgroup. In fact, given the fact that a cgroup may contain large
number of tasks, it's not a good idea to iterate over them while
holding IRQ-safe spinlock.
Let's simplify locking by replacing per-cgroup freezer->lock with
global freezer_mutex. This also makes the comments explaining the
intricacies of policy inheritance and the locking around it as the
states are protected by a common mutex.
The conversion is mostly straight-forward. The followings are worth
mentioning.
* freezer_css_online() no longer needs double locking.
* freezer_attach() now performs propagation simply while holding
freezer_mutex. update_if_frozen() race no longer exists and the
comment is removed.
* freezer_fork() now tests whether the task is in root cgroup using
the new task_css_is_root() without doing rcu_read_lock/unlock(). If
not, it grabs freezer_mutex and performs the operation.
* freezer_read() and freezer_change_state() grab freezer_mutex across
the whole operation and pin the css while iterating so that each
descendant processing happens in sleepable context.
Fixes: 96d365e0b86e ("cgroup: make css_set_lock a rwsem and rename it to css_set_rwsem")
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 5024ae29cd285ce9e736776414da645d3a91828c
Author: Tejun Heo <tj@kernel.org>
Date: Wed May 7 21:31:17 2014 -0400
cgroup: introduce task_css_is_root()
Determining the css of a task usually requires RCU read lock as that's
the only thing which keeps the returned css accessible till its
reference is acquired; however, testing whether a task belongs to the
root can be performed without dereferencing the returned css by
comparing the returned pointer against the root one in init_css_set[]
which never changes.
Implement task_css_is_root() which can be invoked in any context.
This will be used by the scheduled cgroup_freezer change.
v2: cgroup no longer supports modular controllers. No need to export
init_css_set. Pointed out by Li.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
commit 85dbd5801f62b66e2aa7826aaefcaebead44c8a6
Author: Lv Zheng <lv.zheng@intel.com>
Date: Tue May 13 16:50:30 2014 +0800
ACPICA: Tables: Restore old behavor to favor 32-bit FADT addresses.
We need to find a smarter way to switch to 64-bit FADT addresses according
to the bug report. This patch reverts Linux to the original behavior.
Fixes: 0249ed2444d6 (ACPICA: Add option to favor 32-bit FADT addresses.)
References: https://bugzilla.kernel.org/show_bug.cgi?id=74021
Reported-and-tested-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 5ff365fb6aed4c7ee5aae7b0239ce0b514aefabc
Author: Aaron Lu <aaron.lu@intel.com>
Date: Tue May 13 09:51:50 2014 +0800
ACPI / video: correct DMI tag for Dell Inspiron 7520
The DMI tag used to identify Dell Inspiron 7520 should be product name
instead of product version.
Fixes: 0e9f81d3b7cd (ACPI / video: Add systems that should favour native backlight interface)
Reported-and-tested-by: Téo Mazars <teomazars@gmail.com>
References: https://bugzilla.redhat.com/show_bug.cgi?id=909552
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 555724a831b4a146e7bdf16ecc989cda032b076d
Author: Tejun Heo <tj@kernel.org>
Date: Mon May 12 13:56:27 2014 -0400
kernfs, sysfs, cgroup: restrict extra perm check on open to sysfs
The kernfs open method - kernfs_fop_open() - inherited extra
permission checks from sysfs. While the vfs layer allows ignoring the
read/write permissions checks if the issuer has CAP_DAC_OVERRIDE,
sysfs explicitly denied open regardless of the cap if the file doesn't
have any of the UGO perms of the requested access or doesn't implement
the requested operation. It can be debated whether this was a good
idea or not but the behavior is too subtle and dangerous to change at
this point.
After cgroup got converted to kernfs, this extra perm check also got
applied to cgroup breaking libcgroup which opens write-only files with
O_RDWR as root. This patch gates the extra open permission check with
a new flag KERNFS_ROOT_EXTRA_OPEN_PERM_CHECK and enables it for sysfs.
For sysfs, nothing changes. For cgroup, root now can perform any
operation regardless of the permissions as it was before kernfs
conversion. Note that kernfs still fails unimplemented operations
with -EINVAL.
While at it, add comments explaining KERNFS_ROOT flags.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrey Wagin <avagin@gmail.com>
Tested-by: Andrey Wagin <avagin@gmail.com>
Cc: Li Zefan <lizefan@huawei.com>
References: http://lkml.kernel.org/g/CANaxB-xUm3rJ-Cbp72q-rQJO5mZe1qK6qXsQM=vh0U8upJ44+A@mail.gmail.com
Fixes: 2bd59d48ebfb ("cgroup: convert to kernfs")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7189eb9b8f7962474956196c301676470542f253
Author: Mengdong Lin <mengdong.lin@intel.com>
Date: Tue May 13 16:57:08 2014 +0800
ALSA: hda - mask buggy stream DMA0 for Broadwell display controller
Broadwell display controller has 3 stream DMA engines. DMA0 cannot update DMA
postion buffer properly while DMA1 and DMA2 can work well. So this patch masks
the buggy DMA0 by keeping it as opened.
This is a tentative workaround, so keep the change small as Takashi suggested.
Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit ec5fe98886b686f065ef29d8dee1b3ca66f5fd48
Author: Aaron Plattner <aplattner@nvidia.com>
Date: Mon May 12 20:05:02 2014 -0700
ALSA: hda - Add new GPU codec ID to snd-hda
Vendor ID 0x10de0071 is used by a yet-to-be-named GPU chip.
Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit 8e33f91a0b84ae1964bef77cb92f5d41d97530c8
Author: Ben Dooks <ben.dooks@codethink.co.uk>
Date: Tue Apr 15 17:06:34 2014 +0100
clk: shmobile: clk-mstp: change to using clock-indices
With the addition of clock-indices, we need to change the renesas
clock implementation to use these instead of the local definition
of "renesas,clock-indices".
Since this will break booting with older device trees, we add a
simple auto-detection of which properties are present.
Signed-off-by: Ben Dooks <ben.dooks@codethin…
ddstreet
referenced
this pull request
in ddstreet/linux
May 28, 2014
GIT b96ba19767320e2b27ceb4e1976ec21f0ab54605
commit fbfad49076646165bbd72de4dccf1d5132ab7856
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue May 20 11:13:28 2014 +0200
ASoC: neo1973_wm8753: Automatically disconnected non-connected pins
The DAPM routes for this board are complete, hence we can let the core take care
of disconnecting non-connected pins rather than doing it manually.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 41148c3a728222a885bc2f3ba3ce66831de0b244
Author: Qipan Li <Qipan.Li@csr.com>
Date: Sun May 4 14:32:36 2014 +0800
spi: sirf: decrease the interrupt count and latency of PIO mode
current PIO tranfer method be described as follows:
1. fill as much as bytes but no more than 256 bytes(fifo size)
2. enable oflow/uflow/txfifo_empty interrupt
3. isr process 3 interrupt signal, do complete works.
4. after isr done, if there are left bytes go into 1 else go into 5
5. transfer end
by current PIO transfer method:
1. reduce interrupt counts in spi interrupt line.
2. reduce interrupt latency because no do data fill/fetch in isr.
Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit c86d50f9dc525cb0264c25ed5186faf0f1d00477
Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
Date: Mon May 19 19:30:38 2014 +0200
ASoC: samsung: Allow setting OP_CLK of the IIS Multi Audio Interface
This patch adds support for setting source clock of the "Core CLK"
of the IIS Multi Audio Interface.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit b45281412a6334ab2be5d7e449c98f50fb424a78
Author: Arnd Bergmann <arnd@arndb.de>
Date: Sun May 4 11:25:21 2014 +0800
ASoC: pxa: remove mach header dependency
As we are moving the mmp platform towards multiplatform support,
we have to stop including platform header files.
This changes the pxa-ssp sound driver file to no longer depend
on mach/hardware.h and mach/dma.h. The code using the definitions
from those headers is actually gone already, the only thing
that was still being used was the pxa_dma_desc typedef, which
we can easily work around by using the normal 'struct pxa_dma_desc'
name.
The pxa2xx-dma driver still uses this header, so we include it
explicitly there, which is ok because that is only used on pxa,
not on mmp.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Xia Kaixu <kaixu.xia@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 7d6d478f38fb1bdef30ae1a4c9d5aefb7cb2bb9b
Author: Andrew Lunn <andrew@lunn.ch>
Date: Sat May 3 20:30:11 2014 +0200
ASoC: alc5623: Add device tree binding
Let the ALC5623 codec be instantiated from DT. Add a simple binding
for the additional control register and the jack detect register.
Also, add a prompt to the Kconfig entry for this CODEC, so that it can
be selected. Since kirkwood-t5325.c will no longer be used, we need to
be able to enable the CODEC in the mvebu_v5_defconfig etc.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit ee9daad4953418ecf28a6b0b920f982fe0c24814
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Mon Apr 28 12:54:52 2014 +0200
ASoC: fsl-ssi: Move fsl_ssi_set_dai_sysclk above fsl_ssi_hw_params
fsl_ssi_set_dai_sysclk will be called from fsl_ssi_hw_params in the
next patch. Move up to avoid forward declaration and to keep the next patch
more readable. No functional change.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 504894799fa122822f5c48be2968e04d3f1af8e8
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:51 2014 +0200
ASoC: fsl-ssi: Transmit enable synchronization
When the fsl-ssi unit is used in i2s slave mode, it is possible that the
SSI unit starts transmitting data on the wrong channel. This happens
because the SSI does not synchronize with the left-right-clock by
default.
This patch enables transmit enable synchronization.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 171d683d2ac4ab6f220cc99de08ef9ec2c039966
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:48 2014 +0200
ASoC: fsl-ssi: Remove unnecessary variables from ssi_private
There are some variables defined in struct fsl_ssi_private that describe
states that are also described by other variables.
This patch adds some helper functions that return exactly the same
information based on available variables. This helps to clean up struct
fsl_ssi_private and remove them from the probe function.
It also removes some not really used variables (new_binding, name).
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 4d9b7926f2ce271e0670cf0e7131a0e2a686690a
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:47 2014 +0200
ASoC: fsl-ssi: Cleanup probe function
Reorder the probe function to be able to move the second imx-specific
block to the seperate imx probe function. The patch also removes some
comments/variables/code that are not used anymore or could be simply
replaced by other variables.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit ed0f1604e93c686d8151c5a9bcbe36a2986caf40
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:46 2014 +0200
ASoC: fsl-ssi: Remove useless DMA code
Simplify dma DT property handling. fsl,ssi-dma-events is not used
anymore. It passes invalid data to imx_pcm_dma_params_init_data() which
copies some data into an imx dma struct. This struct is never used in
imx-dma or imx-sdma because of generic OF DMA handling. The
"fsl,ssi-dma-events" is not used anywhere in dts files.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 49da09e26577702516e946ecd537f50b87533315
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:45 2014 +0200
ASoC: fsl-ssi: Move imx-specific probe to seperate function
Move imx specific probe code to a seperate function. It reduces the
size of the probe() function and makes the code and error handling
easier to understand.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 2a1d102de40a799072309d4d84fa6f214c5ee999
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:44 2014 +0200
ASoC: fsl-ssi: Use dev_name for DAI driver struct
Instead of creating a name using string manipulation functions, we can
simply use the device name for the DAI driver struct.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit f138e6212427d0ea6283e07b706823b657ddf14f
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:43 2014 +0200
ASoC: fsl-ssi: Move debugging to seperate file
Move all code that is only used for debugging to a seperate file. This
makes it easier to see what functions are used for debugging only.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 65c961cc59345fa347173e5a1f5866bc866fd626
Author: Markus Pargmann <mpa@pengutronix.de>
Date: Mon Apr 28 12:54:42 2014 +0200
ASoC: fsl-ssi: Fix register values when disabling
The bits we have to clear when disabling are different when the other
stream is still active.
This patch fixes the calculation of new register values after disabling
one stream. It also adds a more detailed description of the new register
value calculation.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-By: Michael Grzeschik <mgr@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 55bc82536960e4749df7ae5666a93702190c53d4
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Mon May 19 11:41:48 2014 +0200
ASoC: mop500_ab8500: Replace instances of rtd->codec->card with rtd->card
No need to go via the CODEC to get a pointer to the card. This will help to
eventually remove the card field from the snd_soc_codec struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit 0596f70069bb5ab34eea980c14fad1041f2abae5
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Mon May 19 11:41:46 2014 +0200
ASoC: omap: Replace instances of rtd->codec->card with rtd->card
No need to go via the CODEC to get a pointer to the card. This will help to
eventually remove the card field from the snd_soc_codec struct.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit cf7b71f46b1c2f0376c373e10e5eee1b1fa3cd12
Author: Lars-Peter Clausen <lars@metafoo.de>
Date: Tue May 20 14:23:10 2014 +0200
ASoC: ad1980: Replace goto loop with do-while loop
Using a proper do-while loop here instead of a open-coded goto loop is both
cleaner and shorter.
Also fixes the following warnings from smatch:
sound/soc/codecs/ad1980.c:213 ad1980_reset() info: loop could be replaced with if statement.
sound/soc/codecs/ad1980.c:212 ad1980_reset() info: ignoring unreachable code.
sound/soc/codecs/ad1980.c:215 ad1980_reset() info: ignoring unreachable code.
While we are at it also change retry_cnt to unsigned int, using u16 for a
on-stack loop counter doesn't make that much sense.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
commit da41a589f52464e24ddefe76814ee35bfb07950c
Author: Robert Elliott <elliott@hp.com>
Date: Tue May 20 16:46:26 2014 -0500
blk-mq: Micro-optimize blk_queue_nomerges() check
In blk_mq_make_request(), do the blk_queue_nomerges() check
outside the call to blk_attempt_plug_merge() to eliminate
function call overhead when nomerges=2 (disabled)
Signed-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit eba7176826ddab1d04c51bb2d5f2bbf22865444c
Author: Jens Axboe <axboe@fb.com>
Date: Tue May 20 15:17:27 2014 -0600
blk-mq: initialize q->nr_requests after calling blk_queue_make_request()
blk_queue_make_requests() overwrites our set value for q->nr_requests,
turning it into the default of 128. Set this appropriately after
initializing queue values in blk_queue_make_request().
Signed-off-by: Jens Axboe <axboe@fb.com>
commit bc76e320f21f8bd790a72bd5dc06909617432352
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue May 20 22:46:50 2014 +0200
drm/i915: Drop now misleading DDI comment from dp_link_down
Since
commit 2e82a7203182d0883d0f9450d40ad6e1c6578ad9
Author: Imre Deak <imre.deak@intel.com>
Date: Fri Jan 17 15:46:43 2014 +0200
drm/i915: don't disable DP port after a failed link training
and
commit 5d6a1116c6475404e6505b708320f9579ae19acd
Author: Imre Deak <imre.deak@intel.com>
Date: Thu Jan 16 18:35:57 2014 +0200
drm/i915: don't disable the DP port if the link is lost
we no longer call intel_dp_link_down from generic DP code, but only
from the !HAS_DDI dp encoder functions. hsw/bdw have their own encoder
disabling callback in intel_ddi.c.
Hence the early return is no longer needed and the big comment just
confusing, so let's rip it out. To ensure what we don't accidentally
use this again on ddi encoders add a WARN_ON instead.
Spotted while reading through intel_dp.c
Cc: Imre Deak <imre.deak@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 96810471673393c931595a013f0f3094b564b1e9
Author: John W. Linville <linville@tuxdriver.com>
Date: Tue May 20 15:34:37 2014 -0400
ath9k: fixup "ath9k_htc: fix build with disabled debug"
Apparently Oleksij's compile testing was no better than mine initially
was... :-(
Cc: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 37c492c8f6a99870551fe2964b2dfce5d9e87375
Author: Harald Brinkmann <hbrinkmann@braincalibration.de>
Date: Tue May 20 20:28:00 2014 +0200
HID: quirk for Saitek RAT7 and MMO7 mices' mode button
Some saitek mice implement a tristate button (for switching button mappings in
the original driver) by keeping one of three (non-physical)
buttons constantly pressed.
This breaks X and probably other userspace software.
This patch implements a quirk for the R.A.T.7 and M.M.O.7, tracking the mode
and generating presses of a single button if it changes. Also the missing
release event is generated instantly.
Signed-off-by: Harald Brinkmann <hbrinkmann@braincalibration.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
commit 525997e00bd32c3e25d5f77c26703f76c498f424
Author: Jani Nikula <jani.nikula@intel.com>
Date: Tue Apr 29 23:30:48 2014 +0300
drm/i915: shuffle panel code
Somehow a few functions have been dropped in the middle of backlight
code. Move them around. No functional changes.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 9aa7250feb202f246afd90d9525debabe10cc0a5
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon May 19 19:23:26 2014 +0300
drm/i915: Clear GDSR after reset on ILK
Clear the reset domain after a succesful GPU reset on ilk. We already
do that on gen4, so let's try to be a bit more consistent. And if
ether render or media reset fails, we might use the leftover value
in the register to pinpoint the culprit.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit f73387cb6b1f1534e56669e6aecefae1be867f59
Author: Dylan Reid <dgreid@chromium.org>
Date: Tue May 20 11:26:12 2014 -0700
ALSA: hda/tegra - Fix MODULE_DEVICE_TABLE typo.
I missed a rename during the review process. Fix the
MODULE_DEVICE_TABLE to match the structure.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
commit 0f08ffd6633fe8b8306229593027009e90f86c8c
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon May 19 19:23:25 2014 +0300
drm/i915: Kill RMW from ILK reset code
All the other bits in the GDSR register are read-only, so we don't have
to preserve them when we perform a GPU reset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit fc3b7a70ac7c2baee512a1ea8df9e7c4085ac3e5
Author: Joe Thornber <ejt@redhat.com>
Date: Tue May 13 16:14:14 2014 -0400
dm thin: cleanup noflush_work to use a proper completion
Factor out a pool_work interface that noflush_work makes use of to wait
for and complete work items (in terms of a proper completion struct).
Allows discontinuing the use of a custom completion in terms of atomic_t
and wait_event.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 8490cd8ed20f9ff7b54a3fc858a1ff4b98a5593f
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Fri Mar 14 18:43:07 2014 -0400
dm snapshot: do not split read bios sent to snapshot-origin target
Change the snapshot-origin target so that only write bios are split on
chunk boundary. Read bios are passed unchanged to the underlying
device, so they don't have to be split.
Later, we could change the target so that it accepts a larger write bio
if it spans an area that is completely covered by snapshot exceptions.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit c0d4c8e9d1bb7fdc847e0753cceaf557d19d6223
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Fri Mar 14 18:42:12 2014 -0400
dm snapshot: allocate a per-target structure for snapshot-origin target
Allocate a per-target dm_origin structure. This is a prerequisite for
the next commit ("dm snapshot: do not split read bios sent to
snapshot-origin target") which adds a new member to this structure.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 12f66f49e359a35942b2a3170227132d75d47c32
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Fri Mar 14 18:41:24 2014 -0400
dm: introduce dm_accept_partial_bio
The function dm_accept_partial_bio allows the target to specify how many
sectors of the current bio it will process. If the target only wants to
accept part of the bio, it calls dm_accept_partial_bio and the DM core
sends the rest of the data in next bio.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit e628835d01fa8e3cc6764948fad1229ba79f08c3
Author: Mikulas Patocka <mpatocka@redhat.com>
Date: Fri Mar 14 18:40:39 2014 -0400
dm: change sector_count member in clone_info from sector_t to unsigned
It is impossible to create bios with 2^23 or more sectors (the size is
stored as a 32-bit byte count in the bio). So we convert some sector_t
values to unsigned integers.
This is needed for the next commit ("dm: introduce
dm_accept_partial_bio") that replaces integer value arguments with
pointers, so the size of the integer must match.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
commit 80c578930ce77ba8bcfb226a184b482020bdda7b
Author: Mike Snitzer <snitzer@redhat.com>
Date: Tue May 20 13:38:33 2014 -0400
dm thin: add 'no_space_timeout' dm-thin-pool module param
Commit 85ad643b ("dm thin: add timeout to stop out-of-data-space mode
holding IO forever") introduced a fixed 60 second timeout. Users may
want to either disable or modify this timeout.
Allow the out-of-data-space timeout to be configured using the
'no_space_timeout' dm-thin-pool module param. Setting it to 0 will
disable the timeout, resulting in IO being queued until more data space
is added to the thin-pool.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.14+
commit 5f80ff8eccba50832dcc640ac89add4c7fced963
Author: Sagi Grimberg <sagig@mellanox.com>
Date: Tue May 20 13:28:11 2014 +0300
Target/iser: Gracefully reject T10-PI enabled connect request if not supported
In case user chose to set T10-PI enable on the target while
the IB device does not support it, gracefully reject the request.
Reported-by: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.15+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit f5ebec9629cf78eeeea4b8258882a9f439ab2404
Author: Sagi Grimberg <sagig@mellanox.com>
Date: Mon May 19 17:44:25 2014 +0300
Target/iser: Wait for proper cleanup before unloading
disconnected_handler works are scheduled on system_wq.
When attempting to unload, first make sure all works
have cleaned up.
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 88c4015fda6d014392f76d3b1688347950d7a12d
Author: Sagi Grimberg <sagig@mellanox.com>
Date: Mon May 19 17:44:24 2014 +0300
Target/iser: Improve cm events handling
There are 4 RDMA_CM events that all basically mean that
the user should teardown the IB connection:
- DISCONNECTED
- ADDR_CHANGE
- DEVICE_REMOVAL
- TIMEWAIT_EXIT
Only in DISCONNECTED/ADDR_CHANGE it makes sense to
call rdma_disconnect (send DREQ/DREP to our initiator).
So we keep the same teardown handler for all of them
but only indicate calling rdma_disconnect for the relevant
events.
This patch also removes redundant debug prints for each single
event.
v2 changes:
- Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag)
Signed-off-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
commit 9b204fbf0987748ec6cc4a3cde0064ecf42accd0
Author: Asai Thambi S P <asamymuthupa@micron.com>
Date: Tue May 20 10:48:56 2014 -0700
mtip32xx: move error handling to service thread
Move error handling to service thread, and use mtip_set_timeout()
to set timeouts for HDIO_DRIVE_TASK and HDIO_DRIVE_CMD IOCTL commands.
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
commit e3a2b3f931f59d5284abd13faf8bded726884ffd
Author: Jens Axboe <axboe@fb.com>
Date: Tue May 20 11:49:02 2014 -0600
blk-mq: allow changing of queue depth through sysfs
For request_fn based devices, the block layer exports a 'nr_requests'
file through sysfs to allow adjusting of queue depth on the fly.
Currently this returns -EINVAL for blk-mq, since it's not wired up.
Wire this up for blk-mq, so that it now also always dynamic
adjustments of the allowed queue depth for any given block device
managed by blk-mq.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit 463eb599929709d6b53bf6f3bea1189292cd8456
Author: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Date: Tue May 20 13:48:51 2014 +0100
mfd: arizona: Correct addresses of always-on trigger registers
Update the addresses and names to match current silicon.
The WM8997 regmap tables have been adjusted to match the new
names.
Missing registers have been added to WM5110 default value table.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 145894202252809015c3b7d764dc571cfd457f24
Author: Jay Aurabind <mail@aurabindo.in>
Date: Sat May 10 17:32:11 2014 +0530
mfd: abx500-core: Fix compiler warning larger stack frame
On systems with CONFIG_FRAME_WARN=1024, compiler warns the allocation of
an object of struct device on stack. Make the allocation dynamically to
fix the warning.
drivers/mfd/abx500-core.c: In function ‘abx500_dump_all_banks’:
drivers/mfd/abx500-core.c:167:1: warning: the frame size of 1032 bytes
is larger than 1024 bytes [-Wframe-larger-than=]
Signed-off-by: Aurabindo J <mail@aurabindo.in>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 43d6a0e7cc04e9d22636fe7ef8896ca906218b24
Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Thu May 15 19:51:43 2014 +0200
mfd: axp22x: Add support for APX221 PMIC
This patch introduces preliminary support for the X-Powers AXP221 PMIC.
The AXP221 is typically used on boards using Allwinner's A31 SoC.
At the moment, this driver only exposes regulator devices, but other
subdevices.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit e9ff951e5b4f16f078394555c42c62e73a6eeb5f
Author: Lee Jones <lee.jones@linaro.org>
Date: Tue May 20 15:37:41 2014 +0100
mfd: max14577: Cast to architecture agnostic data type
drivers/mfd/max14577.c:334:25:
warning: cast from pointer to integer of different size
max14577->dev_type = (unsigned int)of_id->data;
^
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 4e31f780bdebcd23700703fbedf1d3bffd05043f
Author: Lee Jones <lee.jones@linaro.org>
Date: Tue May 20 15:35:27 2014 +0100
mfd: axp20x: Remove unnecessary const qualifier from axp20x_supplies[]
drivers/mfd/axp20x.c:159:3:
warning: initialization discards ‘const’ qualifier from pointer target type
.parent_supplies = axp20x_supplies,
^
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit e917e890cf40510d35253034de850410b56a6e20
Author: Doug Anderson <dianders@chromium.org>
Date: Wed Apr 30 10:44:06 2014 -0700
mfd: cros_ec: spi: Make the cros_ec_spi timeout more reliable
The cros_ec_spi transfer had two problems with its timeout code:
1. It looked at the timeout even in the case that it found valid data.
2. If the cros_ec_spi code got switched out for a while, it's possible
it could get a timeout after a single loop. Let's be paranoid and
make sure we do one last transfer after the timeout expires.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 626bffd4dd65dccdf0978eff6a3341c1d7b04b9a
Author: Doug Anderson <dianders@chromium.org>
Date: Wed Apr 30 10:44:07 2014 -0700
mfd: cros_ec: spi: Increase cros_ec_spi deadline from 5ms to 100ms
We're adding i2c tunneling to the list of things that goes over
cros_ec. i2c tunneling can be slooooooow, so increase our deadline to
100ms to account for that.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit e917e3366c7be56a08d84417b36a143b2e8af716
Author: Doug Anderson <dianders@chromium.org>
Date: Wed Apr 30 10:44:05 2014 -0700
mfd: cros_ec: spi: Add mutex to cros_ec_spi
The main transfer function for cros_ec_spi can be called by more than
one client at a time. Make sure that those clients don't stomp on
each other by locking the bus for the duration of the transfer
function.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 6bcd21ee2826c978defc9169227e3e850537a519
Author: David Hendricks <dhendrix@chromium.org>
Date: Wed Apr 30 10:44:04 2014 -0700
mfd: cros_ec: spi: Calculate delay between transfers correctly
To avoid spamming the EC we calculate the time between the previous
transfer and the current transfer and force a delay if the time delta
is too small.
However, a small miscalculation causes the delay period to be
far too short. Most noticably this impacts commands with a long
turnaround time such as EC firmware reads and writes.
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit f00fc2588b66d3441ed65aaa7f7f2353df00939a
Author: Bill Richardson <wfrichar@chromium.org>
Date: Wed Apr 30 10:44:08 2014 -0700
mfd: cros_ec: Sync to the latest cros_ec_commands.h from EC sources
This just updates include/linux/mfd/cros_ec_commands.h to match the
latest EC version (which is the One True Source for such things). See
<https://chromium.googlesource.com/chromiumos/platform/ec>
[dianders: took today's ToT version from the Chromium OS EC; deleted
references to cros_ec_dev and cros_ec_lpc since those aren't upstream
yet]
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit d46144d7bc9f9e1121fe83edf7a9cc9f19b41d9d
Author: Doug Anderson <dianders@chromium.org>
Date: Wed Apr 30 10:44:09 2014 -0700
i2c: ChromeOS EC tunnel driver
On ARM Chromebooks we have a few devices that are accessed by both the
AP (the main "Application Processor") and the EC (the Embedded
Controller). These are:
* The battery (sbs-battery).
* The power management unit tps65090.
On the original Samsung ARM Chromebook these devices were on an I2C
bus that was shared between the AP and the EC and arbitrated using
some extranal GPIOs (see i2c-arb-gpio-challenge).
The original arbitration scheme worked well enough but had some
downsides:
* It was nonstandard (not using standard I2C multimaster)
* It only worked if the EC-AP communication was I2C
* It was relatively hard to debug problems (hard to tell if i2c issues
were caused by the EC, the AP, or some device on the bus).
On the HP Chromebook 11 the design was changed to:
* The AP/EC comms were still i2c, but the battery/tps65090 were no
longer on the bus used for AP/EC communication. The battery was
exposed to the AP through a limited i2c tunnel and tps65090 was
exposed to the AP through a custom Linux driver.
On the Samsung ARM Chromebook 2 the scheme is changed yet again, now:
* The AP/EC comms are now using SPI for faster speeds.
* The EC's i2c bus is exposed to the AP through a full i2c tunnel.
The upstream "tegra124-venice2" uses the same scheme as the Samsung
ARM Chromebook 2, though it has a different set of components on the
other side of the bus.
This driver supports the scheme used by the Samsung ARM Chromebook 2.
Future patches to this driver could add support for the battery tunnel
on the HP Chromebook 11 (and perhaps could even be used to access
tps65090 on the HP Chromebook 11 instead of using a special driver,
but I haven't researched that enough).
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 4bdc72930743b35f23b6c80426a2c9f6dda5e9b6
Author: Imre Deak <imre.deak@intel.com>
Date: Tue May 20 19:47:20 2014 +0300
drm/i915: add missing unregister_oom_notifier to the error/unload path
I'm trying to reduce the WARNs during driver reload and this was one of
them. Also while at it remove the redundant condition from before
unregister_shrinker().
v2:
- fix the error path too and move the unregister to its logical place
(Chris)
- remove redundant condition from before unregister_shrinker()
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 5cfb17828d877a5541171087b9d746befdf2a126
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:08:34 2014 +0200
IB/srp: Add fast registration support
Certain HCA types (e.g. Connect-IB) and certain configurations (e.g.
ConnectX VF) support fast registration but not FMR. Hence add fast
registration support.
In function srp_rport_reconnect(), move the the srp_finish_req()
loop from after to before the srp_create_target_ib() call. This is
needed to avoid that srp_finish_req() tries to queue any
invalidation requests for rkeys associated with the old queue pair
on the newly allocated queue pair. Invoking srp_finish_req() before
the queue pair has been reallocated is safe since srp_claim_req()
handles completions correctly that arrive after srp_finish_req()
has been invoked.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit 52ede08f00ebfc21d50a1f3e5908a78655900519
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:07:45 2014 +0200
IB/srp: Rename FMR-related variables
The next patch will cause the renamed variables to be shared between
the code for FMR and for FR memory registration. Make the names of
these variables independent of the memory registration mode. This
patch does not change any functionality. The start of this patch was
the changes applied via the following shell command:
sed -i.orig 's/SRP_FMR_SIZE/SRP_MAX_PAGES_PER_MR/g; \
s/fmr_page_mask/mr_page_mask/g;s/fmr_page_size/mr_page_size/g; \
s/fmr_page_shift/mr_page_shift/g;s/fmr_max_size/mr_max_size/g; \
s/max_pages_per_fmr/max_pages_per_mr/g;s/nfmr/nmdesc/g; \
s/fmr_len/dma_len/g' drivers/infiniband/ulp/srp/ib_srp.[ch]
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit d1b4289e16477fe13e95b88ffb7067c87b10ab6e
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:07:20 2014 +0200
IB/srp: One FMR pool per SRP connection
Allocate one FMR pool per SRP connection instead of one SRP pool
per HCA. This improves scalability of the SRP initiator.
Only request the SCSI mid-layer to retry a SCSI command after a
temporary mapping failure (-ENOMEM) but not after a permanent
mapping failure. This avoids that SCSI commands are retried
indefinitely if a permanent memory mapping failure occurs.
Tell the SCSI mid-layer to reduce queue depth temporarily in the
unlikely case where an application is queuing many requests with
more than max_pages_per_fmr sg-list elements.
For FMR pool allocation, base the max_pages_per_fmr parameter on
the HCA memory registration limit. Only try to allocate an FMR
pool if FMR is supported.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit b1b8854d1622b99b64cd98ed307ffd168c6d3ebd
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:06:41 2014 +0200
IB/srp: Introduce the 'register_always' kernel module parameter
Add a kernel module parameter that enables memory registration also for SG-lists
that can be processed without memory registration. This makes it easier for kernel
developers to test the memory registration code.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit 539dde6fc5c30cfa76439de03ed3ba444d2579b3
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:05:46 2014 +0200
IB/srp: Introduce srp_finish_mapping()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit 76bc1e1ddd1ea8d4bc230fc0aa45c1d14c232531
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:05:21 2014 +0200
IB/srp: Introduce srp_map_fmr()
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit 62154b2e892807b8373a107c277f1fa8338f4333
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:04:45 2014 +0200
IB/srp: Introduce an additional local variable
This patch does not change any functionality.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit af24663bc8204695181cf3b92b7129efadd8d455
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:04:21 2014 +0200
IB/srp: Fix kernel-doc warnings
Avoid that the kernel-doc tool warns about missing argument
descriptions for the ib_srp.[ch] source files.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit 024ca90151f5e4296d30f72c13ff9a075e23c9ec
Author: Bart Van Assche <bvanassche@acm.org>
Date: Tue May 20 15:03:49 2014 +0200
IB/srp: Fix a sporadic crash triggered by cable pulling
Avoid that the loops that iterate over the request ring can encounter
a pointer to a SCSI command in req->scmnd that is no longer associated
with that request. If the function srp_unmap_data() is invoked twice
for a SCSI command that is not in flight then that would cause
ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument,
resulting in a kernel oops.
Reported-by: Sagi Grimberg <sagig@mellanox.com>
Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
commit 1cc6114402f864c3d090738df355d26c1fd374bb
Author: Johan Hedberg <johan.hedberg@intel.com>
Date: Tue May 20 09:45:52 2014 +0300
Bluetooth: Update smp_confirm to return a response code
Now that smp_confirm() is called "inline" we can have it return a
response code and have the sending of it be done in the shared place for
command handlers. One exception is when we're entering smp.c from mgmt.c
when user space responds to authentication, in which case we still need
our own code to call smp_failure().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 861580a970f1abe64193636eab9e5a1a7556a555
Author: Johan Hedberg <johan.hedberg@intel.com>
Date: Tue May 20 09:45:51 2014 +0300
Bluetooth: Update smp_random to return a response code
Since we're now calling smp_random() "inline" we can have it directly
return a response code and have the shared command handler send the
response.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 4a74d65868f10dafe38765d4fe5bbf1e75f0623d
Author: Johan Hedberg <johan.hedberg@intel.com>
Date: Tue May 20 09:45:50 2014 +0300
Bluetooth: Rename smp->smp_flags to smp->flags
There's no reason to have "smp" in this variable name since it is
already part of the SMP struct which provides sufficient context.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 9dd4dd275f2e6dcef1f798118babcb5947f64497
Author: Johan Hedberg <johan.hedberg@intel.com>
Date: Tue May 20 09:45:49 2014 +0300
Bluetooth: Remove unnecessary work structs from SMP code
When the SMP code was initially created (mid-2011) parts of the
Bluetooth subsystem were still not converted to use workqueues. This
meant that the crypto calls, which could sleep, couldn't be called
directly. Because of this the "confirm" and "random" work structs were
introduced.
These days the entire Bluetooth subsystem runs through workqueues which
makes these structs unnecessary. This patch removes them and converts
the calls to queue them to use direct function calls instead.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 1ef35827a999582669b38b71d3167907b4c2afd0
Author: Johan Hedberg <johan.hedberg@intel.com>
Date: Tue May 20 09:45:48 2014 +0300
Bluetooth: Fix setting initial local auth_req value
There is no reason to have the initial local value conditional to
whether the remote value has bonding set or not. We can either way start
off with the value we received.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit 4bc58f51e156227d139668199ffe5df2ccb2f3c2
Author: Johan Hedberg <johan.hedberg@intel.com>
Date: Tue May 20 09:45:47 2014 +0300
Bluetooth: Make SMP context private to smp.c
There are no users of the smp_chan struct outside of smp.c so move it
away from smp.h. The addition of the l2cap.h include to hci_core.c,
hci_conn.c and mgmt.c is something that should have been there already
previously to avoid warnings of undeclared struct l2cap_conn, but the
compiler warning was apparently shadowed away by the mention of
l2cap_conn in the struct smp_chan definition.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
commit e1618d461ca18d40f9c3ef70598abb72e75d27ae
Author: Vlad Yasevich <vyasevic@redhat.com>
Date: Tue May 20 10:59:26 2014 -0400
vlan: Fix build error wth vlan_get_encap_level()
The new function vlan_get_encap_level() uses vlan_dev_priv()
which is only conditionally avaialble when VLAN support is
enabled. Make vlan_get_encap_level() conditionally available
as well.
Fixes: 44a4085538c8 ("bonding: Fix stacked device detection in arp monitoring")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
CC: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 51697d393922eb643e78ac5db86e8fa5a45b469a
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:36 2014 +0800
workqueue: use generic attach/detach routine for rescuers
There are several problems with the code that rescuers use to bind
themselve to the target pool's cpumask.
1) It is very different from how the normal workers bind to cpumask,
increasing code complexity and maintenance overhead.
2) The code of cpu-binding for rescuers is complicated.
3) If one or more cpu hotplugs happen while a rescuer is processing
its scheduled work items, the rescuer may not stay bound to the
cpumask of the pool. This is an allowed behavior, but is still
hairy. It will be better if the cpumask of the rescuer is always
kept synchronized with the pool across cpu hotplugs.
Using generic attach/detach routine will solve the above problems and
results in much simpler code.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 4736cbf7a4b2a6bbb50a809a6933fb7eb29dc38f
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:35 2014 +0800
workqueue: separate pool-attaching code out from create_worker()
Currently, the code to attach a new worker to its pool is embedded in
create_worker(). Separating this code out will make the codes clearer
and will allow rescuers to share the code path later.
tj: Description and comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 92f9c5c40cc67ffcc5ac7f55fdbd6ae8afc7e0b4
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:34 2014 +0800
workqueue: rename manager_mutex to attach_mutex
manager_mutex is only used to protect the attaching for the pool
and the pool->workers list. It protects the pool->workers and operations
based on this list, such as:
cpu-binding for the workers in the pool->workers
the operations to set/clear WORKER_UNBOUND
So let's rename manager_mutex to attach_mutex to better reflect its
role. This patch is a pure rename.
tj: Minor command and description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 4d757c5c81edba2052aae10d5b36dfcb9902b141
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:33 2014 +0800
workqueue: narrow the protection range of manager_mutex
In create_worker(), as pool->worker_ida now uses
ida_simple_get()/ida_simple_put() and doesn't require external
synchronization, it doesn't need manager_mutex.
struct worker allocation and kthread allocation are not visible by any
one before attached, so they don't need manager_mutex either.
The above operations are before the attaching operation which attaches
the worker to the pool. Between attaching and starting the worker, the
worker is already attached to the pool, so the cpu hotplug will handle
cpu-binding for the worker correctly and we don't need the
manager_mutex after attaching.
The conclusion is that only the attaching operation needs manager_mutex,
so we narrow the protection section of manager_mutex in create_worker().
Some comments about manager_mutex are removed, because we will rename
it to attach_mutex and add worker_attach_to_pool() later which will be
self-explanatory.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 7cda9aae0596d871a8d7a6888d7b447c60e5ab30
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:32 2014 +0800
workqueue: convert worker_idr to worker_ida
We no longer iterate workers via worker_idr and worker_idr is used
only for allocating/freeing ID, so we can convert it to worker_ida.
By using ida_simple_get/remove(), worker_ida doesn't require external
synchronization, so we don't need manager_mutex to protect it and the
ID-removal code is allowed to be moved out from
worker_detach_from_pool().
In a later patch, worker_detach_from_pool() will be used in rescuers
which don't have IDs, so we move the ID-removal code out from
worker_detach_from_pool() into worker_thread().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit da028469ba173e9c634b6ecf80bb0c69c7d1024d
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:31 2014 +0800
workqueue: separate iteration role from worker_idr
worker_idr has the iteration (iterating for attached workers) and
worker ID duties. These two duties don't have to be tied together. We
can separate them and use a list for tracking attached workers and
iteration.
Before this separation, it wasn't possible to add rescuer workers to
worker_idr due to rescuer workers couldn't allocate ID dynamically
because ID-allocation depends on memory-allocation, which rescuer
can't depend on.
After separation, we can easily add the rescuer workers to the list for
iteration without any memory-allocation. It is required when we attach
the rescuer worker to the pool in later patch.
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 3347fc9f36e7e5d3ebe504fc4034745b5d8971d3
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:30 2014 +0800
workqueue: destroy worker directly in the idle timeout handler
Since destroy_worker() doesn't need to sleep nor require manager_mutex,
destroy_worker() can be directly called in the idle timeout
handler, it helps us remove POOL_MANAGE_WORKERS and
maybe_destroy_worker() and simplify the manage_workers()
After POOL_MANAGE_WORKERS is removed, worker_thread() doesn't
need to test whether it needs to manage after processed works.
So we can remove the test branch.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
commit 60f5a4bcf852b5dec698b08cd34efc302ea72f2b
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:29 2014 +0800
workqueue: async worker destruction
worker destruction includes these parts of code:
adjust pool's stats
remove the worker from idle list
detach the worker from the pool
kthread_stop() to wait for the worker's task exit
free the worker struct
We can find out that there is no essential work to do after
kthread_stop(), which means destroy_worker() doesn't need to wait for
the worker's task exit, so we can remove kthread_stop() and free the
worker struct in the worker exiting path.
However, put_unbound_pool() still needs to sync the all the workers'
destruction before destroying the pool; otherwise, the workers may
access to the invalid pool when they are exiting.
So we also move the code of "detach the worker" to the exiting
path and let put_unbound_pool() to sync with this code via
detach_completion.
The code of "detach the worker" is wrapped in a new function
"worker_detach_from_pool()" although worker_detach_from_pool() is only
called once (in worker_thread()) after this patch, but we need to wrap
it for these reasons:
1) The code of "detach the worker" is not short enough to unfold them
in worker_thread().
2) the name of "worker_detach_from_pool()" is self-comment, and we add
some comments above the function.
3) it will be shared by rescuer in later patch which allows rescuer
and normal thread use the same attach/detach frameworks.
The worker id is freed when detaching which happens before the worker
is fully dead, but this id of the dying worker may be re-used for a
new worker, so the dying worker's task name is changed to
"worker/dying" to avoid two or several workers having the same name.
Since "detach the worker" is moved out from destroy_worker(),
destroy_worker() doesn't require manager_mutex, so the
"lockdep_assert_held(&pool->manager_mutex)" in destroy_worker() is
removed, and destroy_worker() is not protected by manager_mutex in
put_unbound_pool().
tj: Minor description updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 73eb7fe73ae303996187fff38b1c162f1df0e9d1
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:28 2014 +0800
workqueue: destroy_worker() should destroy idle workers only
We used to have the CPU online failure path where a worker is created
and then destroyed without being started. A worker was created for
the CPU coming online and if the online operation failed the created worker
was shut down without being started. But this behavior was changed.
The first worker is created and started at the same time for the CPU coming
online.
It means that we had already ensured in the code that destroy_worker()
destroys only idle workers and we don't want to allow it to destroy
any non-idle worker in the future. Otherwise, it may be buggy and it
may be extremely hard to check. We should force destroy_worker() to
destroy only idle workers explicitly.
Since destroy_worker() destroys only idle workers, this patch does not
change any functionality. We just need to update the comments and the
sanity check code.
In the sanity check code, we will refuse to destroy the worker
if !(worker->flags & WORKER_IDLE).
If the worker entered idle which means it is already started,
so we remove the check of "worker->flags & WORKER_STARTED",
after this removal, WORKER_STARTED is totally unneeded,
so we remove WORKER_STARTED too.
In the comments for create_worker(), "Create a new worker which is bound..."
is changed to "... which is attached..." due to we change the name of this
behavior to attaching.
tj: Minor description / comment updates.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit 9625ab1727743f6a164df26b7b1eeeced7380b42
Author: Lai Jiangshan <laijs@cn.fujitsu.com>
Date: Tue May 20 17:46:27 2014 +0800
workqueue: use manager lock only to protect worker_idr
worker_idr is highly bound to managers and is always/only accessed in manager
lock context. So we don't need pool->lock for it.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
commit e6c34ff13113c2fe24b7b9e8f1a6db1a626ec26c
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Mon May 19 17:35:29 2014 +0100
mfd: arizona: Correct error message for addition of main IRQ chip
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit f59957974e215ad40f087768004700da2395ee6b
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Mon May 19 17:35:28 2014 +0100
mfd: wm8997: Add registers for high power mode
Some output configurations can require a 50Mhz SYSCLK which requires
DCVDD to be 1.8V. This patch adds the registers necessary for
supporting this operational mode.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 9d1234aab7949b8437372214d0042e82dea96fa7
Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Mon May 19 17:35:27 2014 +0100
mfd: arizona: Add MICVDD to mapped regulators
Currently, MICVDD only binds because it is both the regulator name and
the consumer name and we will always match against the regulator name
regardless of the consumer device. If the regulator was renamed using
the init_data ASoC will no longer be able to locate the supply, as it
will be looking on the CODEC device where as the MICVDD consumer is on
the Arizona device. Add a mapping as we do for the other regulators.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit f7d10d7811af6a32070b8e053cf7a11654e7c339
Author: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Date: Tue May 13 12:58:40 2014 +0200
mfd: ipaq-micro: Make mfd_cell array const
mfd_add_devices() expects array of struct mfd_cell to be const.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 84615cca3a34f76bd9a917ce402ce27c08e4985c
Author: Jingoo Han <jg1.han@samsung.com>
Date: Wed May 14 12:17:14 2014 +0900
mfd: ipaq-micro: Use devm_ioremap_resource()
Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
commit 24acfc632b7ba55bbc2a9305e8df31c8e41178b6
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Tue May 20 09:27:18 2014 +0200
b43: xmit: set 5 GHz bit depending on current band
PHYs other than A may also work in 5 GHz mode.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 3cad711dbc79cf9d1bcb9f192ba681e877c18d16
Author: Oleksij Rempel <linux@rempel-privat.de>
Date: Tue May 20 00:02:03 2014 +0200
ath9k_htc: fix build with disabled debug
CC [M] drivers/net/wireless/ath/ath9k/htc_drv_txrx.o
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c: In function ‘ath9k_rx_prepare’:
drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1006:2: warning: passing argument 2 of ‘ath9k_htc_err_stat_rx’ from incompatible pointer type [enabled by default]
ath9k_htc_err_stat_rx(priv, &rx_stats);
^
In file included from drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:17:0:
drivers/net/wireless/ath/ath9k/htc.h:380:20: note: expected ‘struct ath_htc_rx_status *’ but argument is of type ‘struct ath_rx_status *’
static inline void ath9k_htc_err_stat_rx(struct ath9k_htc_priv *priv,
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 773cfc508f4d64c14547ff8751b5cbd473124364
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Mon May 19 23:18:55 2014 +0200
b43: add more devices to the bands database
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 075ca604fcc0f761c66b99a406efded7be31aa14
Author: Rafał Miłecki <zajec5@gmail.com>
Date: Mon May 19 23:18:54 2014 +0200
b43: move bands detection to a separated function
This cleans code a bit and allows adding support for more devices.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
commit 646b4269e4d0513b4c210cdd47384e8607f539fe
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Fri Apr 25 20:14:30 2014 +0300
drm/i915: Drop /** */ comments from i915_reg.h
The comments in i915_reg.h aren't proper kernel-doc comments, so replace
the magic /** with just /*
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 64b14519e5913e8d4de9f2e5d9ef59abba3ed83d
Author: Jens Axboe <axboe@fb.com>
Date: Tue May 20 08:17:35 2014 -0600
htmldocs: fix bio.c location
Commit f9c78b2be2ca moved bio.c from fs/ to block/, but didn't
update the docbook location. Fix that up.
Signed-off-by: Jens Axboe <axboe@fb.com>
commit e4443e459ccf43f2c139358400365fd6a839d40d
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:41 2014 +0300
drm/i915/chv: Add a bunch of pre production workarounds
The following workarounds should be needed for pre-production hardware
only:
* WaDisablePwrmtrEvent:chv
* WaSetMaskForGfxBusyness:chv
* WaDisableGunitClockGating:chv
* WaDisableFfDopClockGating:chv
* WaDisableDopClockGating:chv
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 1966e59ec1075597eff4d7feb3d11536a242d0eb
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:29:04 2014 +0300
drm/i915/chv: Use RMW to toggle swing calc init
The spec only tells us to set individual bits here and there. So we use
RMW for most things. Do the same for the swing calc init.
Eventually we should optimize things to just blast the final value in
with group access whenever possible. But to do that someone needs to
take a good look at what's the reset value for each registers, and
possibly if the BIOS manages to frob with some of them. For now
use RMW access always.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit f72df8dbe2211cf2b70e54f8e9408b889fa56974
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:29:03 2014 +0300
drm/i915/chv: Don't do group access reads from TX lanes either
Like PCS, TX group reads return 0xffffffff. So we need to target each
lane separately if we want to use RMW cycles to update the registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 97fd4d5c81af7976b4ec9971a93bf3c361066c65
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:29:02 2014 +0300
drm/i915/chv: Don't use PCS group access reads
All PCS groups access reads return 0xffffffff, so we can't use group
access for RMW cycles. Instead target each spline separately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
[danvet: Fight conflict with misplaced ; .... ARGH!]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit d2152b2524a96e6cb71097ea26c2e7c3f9e3ee12
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Mon Apr 28 14:15:24 2014 +0300
drm/i915/chv: Set soft reset override bit for data lane resets
The bits we've been setting so far only progagate the reset singal to
the data lanes. To actaully force the reset signal we need to set another
override bit.
v2: Fix mispalced ';' (Mika)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 580d3811f4465feee9d5cacdc88b6aa6b345eff5
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:29:00 2014 +0300
drm/i915/chv: Reset data lanes in encoder .post_disable() hook
Seems like we shouldn't leave the data lane resert deasserted when
the port if disabled. So propagate the reset the data lanes in
the encoder .post_disable() hook.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit d752048dcd1225b481074318cf92ee751d6d475e
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:59 2014 +0300
drm/i915/chv: Turn off dclkp after the PLL has been disabled
During the enable sequence we first enable the dclkp output to the
display controller, and then enable the PLL. Do the opposite during
the disable sequence.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 949c1d43d681a168216afe35071588e8edec354c
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:58 2014 +0300
drm/i915/chv: Move data lane deassert to encoder pre_enable
We need to pick the correct data lanes based on the port not the
pipe, so move the data lane deassert into the encoder .pre_enable()
hook from the chv_enable_pll().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit a11b07039de9e3866bf479f53f7f9db4923cd1c6
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:57 2014 +0300
drm/i915/chv: Fix CHV PLL state tracking
Setup the pipe config dpll state correctly for CHV. Also add
a assert_pipe_disabled() to chv_disable_pll(), and program the
DPLL_MD registers in chv_enable_pll().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
commit 9418c1f1760c91ae1a8947b0da383f3082799b19
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Apr 9 13:28:56 2014 +0300
drm/i915/chv: Register port D encoders and connectors
…
sr105
referenced
this pull request
in RealDigitalMedia/linux-shuttle
Jun 3, 2014
The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [Freescale#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 Freescale#89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Huang Shijie <b32955@freescale.com> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
n-aizu
pushed a commit
to n-aizu/linux
that referenced
this pull request
Sep 10, 2014
The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 torvalds#89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Huang Shijie <b32955@freescale.com> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
pstglia
pushed a commit
to pstglia/linux
that referenced
this pull request
Oct 6, 2014
from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
pstglia
pushed a commit
to pstglia/linux
that referenced
this pull request
Oct 6, 2014
from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
pstglia
pushed a commit
to pstglia/linux
that referenced
this pull request
Oct 6, 2014
from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
pstglia
pushed a commit
to pstglia/linux
that referenced
this pull request
Oct 6, 2014
…released from commit-id: b3379c6 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpfe_release+0x60/0x230) [<c025a65c>] (vpfe_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpfe_video Tainted: G W 3.14.0-rc5-00414-ged97a6f torvalds#89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpfe_release+0x60/0x230) [<c025a65c>] (vpfe_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
chrillomat
pushed a commit
to chrillomat/linux
that referenced
this pull request
Oct 6, 2014
The imx23 board will check the fingerprint, so it will call the mx23_check_transcription_stamp. This function will use @chip->buffers->databuf as its buffer which is allocated in the nand_scan_tail(). Unfortunately, the mx23_check_transcription_stamp is called before the nand_scan_tail(). So we will meet a NULL pointer bug: -------------------------------------------------------------------- [ 1.150000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd7 (Samsung NAND 4GiB 3,3V 8-bit), 4096MiB, page size: 4096, OOB size: 8 [ 1.160000] Unable to handle kernel NULL pointer dereference at virtual address 000005d0 [ 1.170000] pgd = c0004000 [ 1.170000] [000005d0] *pgd=00000000 [ 1.180000] Internal error: Oops: 5 [wandboard-org#1] ARM [ 1.180000] Modules linked in: [ 1.180000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0 torvalds#89 [ 1.180000] task: c7440000 ti: c743a000 task.ti: c743a000 [ 1.180000] PC is at memcmp+0x10/0x54 [ 1.180000] LR is at gpmi_nand_probe+0x42c/0x894 [ 1.180000] pc : [<c025fcb0>] lr : [<c02f6a68>] psr: 20000053 [ 1.180000] sp : c743be2c ip : 600000d3 fp : ffffffff [ 1.180000] r10: 000005d0 r9 : c02f5f08 r8 : 00000000 [ 1.180000] r7 : c75858a8 r6 : c75858a8 r5 : c7585b18 r4 : c7585800 [ 1.180000] r3 : 000005d0 r2 : 00000004 r1 : c05c33e4 r0 : 000005d0 [ 1.180000] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel [ 1.180000] Control: 0005317f Table: 40004000 DAC: 00000017 [ 1.180000] Process swapper (pid: 1, stack limit = 0xc743a1c0) -------------------------------------------------------------------- This patch rearrange the init procedure: Set the NAND_SKIP_BBTSCAN to skip the nand scan firstly, and after we set the proper settings, we will call the chip->scan_bbt() manually. Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Huang Shijie <b32955@freescale.com> Reported-by: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
torvalds
pushed a commit
that referenced
this pull request
Nov 26, 2014
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
torvalds
pushed a commit
that referenced
this pull request
Dec 19, 2014
Currently the calculations of stolen time for PPC Book3S HV guests uses fields in both the vcpu struct and the kvmppc_vcore struct. The fields in the kvmppc_vcore struct are protected by the vcpu->arch.tbacct_lock of the vcpu that has taken responsibility for running the virtual core. This works correctly but confuses lockdep, because it sees that the code takes the tbacct_lock for a vcpu in kvmppc_remove_runnable() and then takes another vcpu's tbacct_lock in vcore_stolen_time(), and it thinks there is a possibility of deadlock, causing it to print reports like this: ============================================= [ INFO: possible recursive locking detected ] 3.18.0-rc7-kvm-00016-g8db4bc6 #89 Not tainted --------------------------------------------- qemu-system-ppc/6188 is trying to acquire lock: (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb1fe8>] .vcore_stolen_time+0x48/0xd0 [kvm_hv] but task is already holding lock: (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb25a0>] .kvmppc_remove_runnable.part.3+0x30/0xd0 [kvm_hv] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&vcpu->arch.tbacct_lock)->rlock); lock(&(&vcpu->arch.tbacct_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by qemu-system-ppc/6188: #0: (&vcpu->mutex){+.+.+.}, at: [<d00000000eb93f98>] .vcpu_load+0x28/0xe0 [kvm] #1: (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecb41b0>] .kvmppc_vcpu_run_hv+0x530/0x1530 [kvm_hv] #2: (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb25a0>] .kvmppc_remove_runnable.part.3+0x30/0xd0 [kvm_hv] stack backtrace: CPU: 40 PID: 6188 Comm: qemu-system-ppc Not tainted 3.18.0-rc7-kvm-00016-g8db4bc6 #89 Call Trace: [c000000b2754f3f0] [c000000000b31b6c] .dump_stack+0x88/0xb4 (unreliable) [c000000b2754f470] [c0000000000faeb8] .__lock_acquire+0x1878/0x2190 [c000000b2754f600] [c0000000000fbf0c] .lock_acquire+0xcc/0x1a0 [c000000b2754f6d0] [c000000000b2954c] ._raw_spin_lock_irq+0x4c/0x70 [c000000b2754f760] [d00000000ecb1fe8] .vcore_stolen_time+0x48/0xd0 [kvm_hv] [c000000b2754f7f0] [d00000000ecb25b4] .kvmppc_remove_runnable.part.3+0x44/0xd0 [kvm_hv] [c000000b2754f880] [d00000000ecb43ec] .kvmppc_vcpu_run_hv+0x76c/0x1530 [kvm_hv] [c000000b2754f9f0] [d00000000eb9f46c] .kvmppc_vcpu_run+0x2c/0x40 [kvm] [c000000b2754fa60] [d00000000eb9c9a4] .kvm_arch_vcpu_ioctl_run+0x54/0x160 [kvm] [c000000b2754faf0] [d00000000eb94538] .kvm_vcpu_ioctl+0x498/0x760 [kvm] [c000000b2754fcb0] [c000000000267eb4] .do_vfs_ioctl+0x444/0x770 [c000000b2754fd90] [c0000000002682a4] .SyS_ioctl+0xc4/0xe0 [c000000b2754fe30] [c0000000000092e4] syscall_exit+0x0/0x98 In order to make the locking easier to analyse, we change the code to use a spinlock in the kvmppc_vcore struct to protect the stolen_tb and preempt_tb fields. This lock needs to be an irq-safe lock since it is used in the kvmppc_core_vcpu_load_hv() and kvmppc_core_vcpu_put_hv() functions, which are called with the scheduler rq lock held, which is an irq-safe lock. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
otavio
referenced
this pull request
in Freescale/linux-fslc
Jul 6, 2015
commit 7cbb87d upstream. Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hzhuang1
pushed a commit
to hzhuang1/linux
that referenced
this pull request
Jul 16, 2015
Uefi android
shenki
pushed a commit
to shenki/linux
that referenced
this pull request
Jul 17, 2015
BugLink: http://bugs.launchpad.net/bugs/1465613 commit 7cbb87d upstream. Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ torvalds#89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
0day-ci
pushed a commit
to 0day-ci/linux
that referenced
this pull request
Dec 8, 2015
It has come to my attention that kprobe event stack tracing does not work on powerpc. You can see with the following: # cd /sys/kernel/debug/tracing # echo stacktrace > trace_options # echo 'p kfree' > kprobe_events # echo 'r exit_mmap' >> kprobe_events # echo 1 > events/kprobes/enable Gives the following splat: save_stack_trace_regs() not implemented yet. ------------[ cut here ]------------ WARNING: at kernel/stacktrace.c:74 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-test torvalds#89 task: c000000000a98660 ti: c00000003efe8000 task.ti: c000000000b98000 NIP: c0000000000fa72c LR: c0000000000fa728 CTR: c0000000004a8b80 REGS: c00000003efeaf40 TRAP: 0700 Not tainted (4.3.0-test) MSR: 9000000000021032 <SF,HV,ME,IR,DR,RI> CR: 28002042 XER: 20000000 SOFTE: 0 GPR00: c0000000000fa728 c00000003efeb1c0 c000000000b9e400 000000000000002c GPR04: 0000000000000000 000000000000013b c000000000b5e790 6e6f7420696d706c GPR08: 656d656e00000000 c000000000aad148 c000000000ba3878 00000000000001ef GPR12: 0000000022002044 c00000000ffff000 0000000000000100 0000000000000000 GPR16: c00000003800f01c c00000003800f02c 000000010000a849 c000000038008100 GPR20: c00000003800f010 c00000003efe8000 0000000000000000 0000000000000000 GPR24: 0000000000000100 c0000000389ad120 c0000000389ad1b0 0000000000000000 GPR28: 0000000000000100 c00000003efeb920 c000000000a1d88c c000000000a93529 NIP [c0000000000fa72c] .save_stack_trace_regs+0x3c/0x70 LR [c0000000000fa728] .save_stack_trace_regs+0x38/0x70 Call Trace: [c00000003efeb1c0] [c0000000000fa728] .save_stack_trace_regs+0x38/0x70 (unreliable) [c00000003efeb240] [c000000000145b2c] .__ftrace_trace_stack+0x15c/0x210 [c00000003efeb310] [c000000000145cc4] .ftrace_trace_stack_regs+0x24/0x40 [c00000003efeb380] [c0000000001467c4] .trace_buffer_unlock_commit_regs+0x44/0x70 [c00000003efeb420] [c000000000165b38] .kprobe_trace_func+0x278/0x400 [c00000003efeb530] [c000000000165d38] .kprobe_dispatcher+0x78/0xa0 [c00000003efeb5c0] [c0000000007b0ca0] .kprobe_exceptions_notify+0x2e0/0x520 [c00000003efeb670] [c0000000000b4934] .notifier_call_chain+0x94/0xf0 [c00000003efeb710] [c0000000000b4a2c] .atomic_notifier_call_chain+0x3c/0x50 [c00000003efeb7a0] [c0000000000b4c48] .notify_die+0x38/0x50 [c00000003efeb830] [c0000000007aff90] .program_check_exception+0x1a0/0x260 [c00000003efeb8b0] [c00000000000621c] program_check_common+0x11c/0x180
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 8, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 8, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 8, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mj22226
pushed a commit
to mj22226/linux
that referenced
this pull request
Mar 8, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 8, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 8, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 10, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 10, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 10, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ammarfaizi2
pushed a commit
to ammarfaizi2/linux-fork
that referenced
this pull request
Mar 10, 2023
commit 996d120 upstream. If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
intelfx
pushed a commit
to intelfx/linux
that referenced
this pull request
May 13, 2023
If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ torvalds#89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> Reported-by: Matt Fagnani <matt.fagnani@bell.net> Suggested-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Vasant Hegde <vasant.hegde@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.info/ Link: https://lore.kernel.org/r/20230215052642.6016-3-vasant.hegde@amd.com Cc: stable@vger.kernel.org [joro: Edit commit message] Signed-off-by: Joerg Roedel <jroedel@suse.de> For: https://bugs.archlinux.org/task/77595
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Jul 22, 2023
KASAN reported a UAF bug while fault injection test: ================================================================== BUG: KASAN: use-after-free in xfs_inode_item_push+0x2db/0x2f0 Read of size 8 at addr ffff888022f74788 by task xfsaild/sda/479 CPU: 0 PID: 479 Comm: xfsaild/sda Not tainted 6.2.0-rc7-00003-ga8a43e2eb5f6 torvalds#89 Call Trace: <TASK> dump_stack_lvl+0x51/0x6a print_report+0x171/0x4a6 kasan_report+0xb7/0x130 xfs_inode_item_push+0x2db/0x2f0 xfsaild+0x729/0x1f70 kthread+0x290/0x340 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 494: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x58/0x70 kmem_cache_alloc+0x197/0x5d0 xfs_inode_item_init+0x62/0x170 xfs_trans_ijoin+0x15e/0x240 xfs_init_new_inode+0x573/0x1820 xfs_create+0x6a1/0x1020 xfs_generic_create+0x544/0x5d0 vfs_mkdir+0x5d0/0x980 do_mkdirat+0x14e/0x220 __x64_sys_mkdir+0x6a/0x80 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 14: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x40 __kasan_slab_free+0x114/0x1b0 kmem_cache_free+0xee/0x4e0 xfs_inode_free_callback+0x187/0x2a0 rcu_do_batch+0x317/0xce0 rcu_core+0x686/0xa90 __do_softirq+0x1b6/0x626 The buggy address belongs to the object at ffff888022f74758 which belongs to the cache xfs_ili of size 200 The buggy address is located 48 bytes inside of 200-byte region [ffff888022f74758, ffff888022f74820) The buggy address belongs to the physical page: page:ffffea00008bdd00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x22f74 head:ffffea00008bdd00 order:1 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffff888010ed4040 ffffea00008b2510 ffffea00008bde10 raw: 0000000000000000 00000000001a001a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888022f74680: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc ffff888022f74700: fc fc fc fc fc fc fc fc fc fc fc fa fb fb fb fb >ffff888022f74780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888022f74800: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888022f74880: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== When push inode item in xfsaild, it will race with reclaim inodes task. Consider the following call graph, both tasks deal with the same inode. During flushing the cluster, it will enter xfs_iflush_abort() in shutdown conditions, inode's XFS_IFLUSHING flag will be cleared and lip->li_buf set to null. Concurrently, inode will be reclaimed in shutdown conditions, there is no need to wait xfs buf lock because of lip->li_buf is null at this time, inode will be freed via rcu callback if xfsaild task schedule out during flushing the cluster. so, it is unsafe to reference lip after flushing the cluster in xfs_inode_item_push(). <log item is in AIL> <filesystem shutdown> spin_lock(&ailp->ail_lock) xfs_inode_item_push(lip) xfs_buf_trylock(bp) spin_unlock(&lip->li_ailp->ail_lock) xfs_iflush_cluster(bp) if (xfs_is_shutdown()) xfs_iflush_abort(ip) xfs_trans_ail_delete(ip) spin_lock(&ailp->ail_lock) spin_unlock(&ailp->ail_lock) xfs_iflush_abort_clean(ip) error = -EIO <log item removed from AIL> <log item li_buf set to null> if (error) xfs_force_shutdown() xlog_shutdown_wait(mp->m_log) might_sleep() xfs_reclaim_inode(ip) if (shutdown) xfs_iflush_shutdown_abort(ip) if (!bp) xfs_iflush_abort(ip) return __xfs_inode_free(ip) call_rcu(ip, xfs_inode_free_callback) ...... <rcu grace period expires> <rcu free callbacks run somewhere> xfs_inode_free_callback(ip) kmem_cache_free(ip->i_itemp) ...... <starts running again> xfs_buf_ioend_fail(bp); xfs_buf_ioend(bp) xfs_buf_relse(bp); return error spin_lock(&lip->li_ailp->ail_lock) <UAF on log item> Fix the race condition by add XFS_ILOCK_SHARED lock for inode in xfs_inode_item_push(). The XFS_ILOCK_EXCL lock is held when the inode is reclaimed, so this prevents the uaf from occurring. Link: https://patchwork.kernel.org/project/xfs/patch/20230211022941.GA1515023@ceph-admin/ Fixes: 90c60e1 ("xfs: xfs_iflush() is no longer necessary") Suggested-by: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Long Li <leo.lilong@huawei.com>
logic10492
pushed a commit
to logic10492/linux-amd-zen2
that referenced
this pull request
Jan 18, 2024
scx: Common include files relocated and more build updates
gyroninja
added a commit
to gyroninja/linux
that referenced
this pull request
Jan 28, 2024
KSAN calls into rcu code which then triggers a write that reenters into KSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??
gyroninja
added a commit
to gyroninja/linux
that referenced
this pull request
Jan 28, 2024
As of 5ec8e8e(mm/sparsemem: fix race in accessing memory_section->usage) KMSAN now calls into RCU tree code during kmsan_get_metadata. This will trigger a write that will reenter into KMSAN getting the system stuck doing infinite recursion. #0 kmsan_get_context () at mm/kmsan/kmsan.h:106 #1 __msan_get_context_state () at mm/kmsan/instrumentation.c:331 #2 0xffffffff81495671 in get_current () at ./arch/x86/include/asm/current.h:42 #3 rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 #4 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 #5 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#6 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#7 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#8 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#9 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#10 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#11 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#12 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#13 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#14 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#15 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#16 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#17 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#18 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#19 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#20 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#21 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#22 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#23 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#24 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#25 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#26 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#27 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#28 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#29 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#30 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#31 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#32 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#33 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#34 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#35 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#36 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#37 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#38 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#39 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#40 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#41 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#42 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#43 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#44 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#45 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#46 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#47 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#48 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#49 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#50 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#51 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 #52 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 #53 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#54 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#55 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#56 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#57 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 #58 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#59 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#60 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#61 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#62 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#63 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#64 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#65 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#66 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#67 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff8620d974 <init_task+1012>) at ./arch/x86/include/asm/kmsan.h:82 torvalds#68 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/shadow.c:75 torvalds#69 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff8620d974 <init_task+1012>, is_origin=false) at mm/kmsan/shadow.c:143 #70 kmsan_get_shadow_origin_ptr (address=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/shadow.c:97 torvalds#71 0xffffffff81b1dbd2 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=4, store=false) at mm/kmsan/instrumentation.c:36 torvalds#72 __msan_metadata_ptr_for_load_4 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:91 torvalds#73 0xffffffff8149568f in rcu_preempt_read_enter () at kernel/rcu/tree_plugin.h:379 torvalds#74 __rcu_read_lock () at kernel/rcu/tree_plugin.h:402 torvalds#75 0xffffffff81b2054b in rcu_read_lock () at ./include/linux/rcupdate.h:748 torvalds#76 pfn_valid (pfn=<optimized out>) at ./include/linux/mmzone.h:2016 torvalds#77 kmsan_virt_addr_valid (addr=addr@entry=0xffffffff86203c90) at ./arch/x86/include/asm/kmsan.h:82 torvalds#78 virt_to_page_or_null (vaddr=vaddr@entry=0xffffffff86203c90) at mm/kmsan/shadow.c:75 torvalds#79 0xffffffff81b2023c in kmsan_get_metadata (address=0xffffffff86203c90, is_origin=false) at mm/kmsan/shadow.c:143 torvalds#80 kmsan_get_shadow_origin_ptr (address=0xffffffff86203c90, size=8, store=false) at mm/kmsan/shadow.c:97 torvalds#81 0xffffffff81b1dc72 in get_shadow_origin_ptr (addr=0xffffffff8620d974 <init_task+1012>, size=8, store=false) at mm/kmsan/instrumentation.c:36 torvalds#82 __msan_metadata_ptr_for_load_8 (addr=0xffffffff8620d974 <init_task+1012>) at mm/kmsan/instrumentation.c:92 torvalds#83 0xffffffff814fdb9e in filter_irq_stacks (entries=<optimized out>, nr_entries=4) at kernel/stacktrace.c:397 torvalds#84 0xffffffff829520e8 in stack_depot_save_flags (entries=0xffffffff8620d974 <init_task+1012>, nr_entries=4, alloc_flags=0, depot_flags=0) at lib/stackdepot.c:500 torvalds#85 0xffffffff81b1e560 in __msan_poison_alloca (address=0xffffffff86203da0, size=24, descr=<optimized out>) at mm/kmsan/instrumentation.c:285 torvalds#86 0xffffffff8562821c in _printk (fmt=0xffffffff85f191a5 "\0016Attempting lock1") at kernel/printk/printk.c:2324 torvalds#87 0xffffffff81942aa2 in kmem_cache_create_usercopy (name=0xffffffff85f18903 "mm_struct", size=1296, align=0, flags=270336, useroffset=<optimized out>, usersize=<optimized out>, ctor=0x0 <fixed_percpu_data>) at mm/slab_common.c:296 torvalds#88 0xffffffff86f337a0 in mm_cache_init () at kernel/fork.c:3262 torvalds#89 0xffffffff86eacb8e in start_kernel () at init/main.c:932 torvalds#90 0xffffffff86ecdf94 in x86_64_start_reservations (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:555 torvalds#91 0xffffffff86ecde9b in x86_64_start_kernel (real_mode_data=0x140e0 <exception_stacks+28896> <error: Cannot access memory at address 0x140e0>) at arch/x86/kernel/head64.c:536 torvalds#92 0xffffffff810001d3 in secondary_startup_64 () at /pool/workspace/linux/arch/x86/kernel/head_64.S:461 torvalds#93 0x0000000000000000 in ??
kuba-moo
pushed a commit
to linux-netdev/testing
that referenced
this pull request
Jul 13, 2024
Revert commit 90dc946 ("selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep") again. The fix in 19d3c17 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF CI is still hanging and timing out: https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436 [...] torvalds#89/11 fexit_bpf2bpf/func_replace_global_func:OK torvalds#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK torvalds#89/13 fexit_bpf2bpf/func_replace_progmap:OK torvalds#89 fexit_bpf2bpf:OK Error: The operation was canceled. Thus more investigation work & fixing is needed before the test can be put in place again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org
Kaz205
pushed a commit
to Kaz205/linux
that referenced
this pull request
Jul 31, 2024
commit 517125f upstream. Revert commit 90dc946 ("selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep") again. The fix in 19d3c17 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF CI is still hanging and timing out: https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436 [...] torvalds#89/11 fexit_bpf2bpf/func_replace_global_func:OK torvalds#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK torvalds#89/13 fexit_bpf2bpf/func_replace_progmap:OK torvalds#89 fexit_bpf2bpf:OK Error: The operation was canceled. Thus more investigation work & fixing is needed before the test can be put in place again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kraj
pushed a commit
to kraj/linux
that referenced
this pull request
Aug 3, 2024
commit 517125f upstream. Revert commit 90dc946 ("selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep") again. The fix in 19d3c17 ("bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG") does not address all of the issues and BPF CI is still hanging and timing out: https://github.com/kernel-patches/bpf/actions/runs/9905842936/job/27366435436 [...] torvalds#89/11 fexit_bpf2bpf/func_replace_global_func:OK torvalds#89/12 fexit_bpf2bpf/fentry_to_cgroup_bpf:OK torvalds#89/13 fexit_bpf2bpf/func_replace_progmap:OK torvalds#89 fexit_bpf2bpf:OK Error: The operation was canceled. Thus more investigation work & fixing is needed before the test can be put in place again. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Puranjay Mohan <puranjay@kernel.org> Link: https://lore.kernel.org/bpf/20240705145009.32340-1-puranjay@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Aug 26, 2024
KASAN reported a UAF bug while fault injection test: ================================================================== BUG: KASAN: use-after-free in xfs_inode_item_push+0x2db/0x2f0 Read of size 8 at addr ffff888022f74788 by task xfsaild/sda/479 CPU: 0 PID: 479 Comm: xfsaild/sda Not tainted 6.2.0-rc7-00003-ga8a43e2eb5f6 torvalds#89 Call Trace: <TASK> dump_stack_lvl+0x51/0x6a print_report+0x171/0x4a6 kasan_report+0xb7/0x130 xfs_inode_item_push+0x2db/0x2f0 xfsaild+0x729/0x1f70 kthread+0x290/0x340 ret_from_fork+0x1f/0x30 </TASK> Allocated by task 494: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x58/0x70 kmem_cache_alloc+0x197/0x5d0 xfs_inode_item_init+0x62/0x170 xfs_trans_ijoin+0x15e/0x240 xfs_init_new_inode+0x573/0x1820 xfs_create+0x6a1/0x1020 xfs_generic_create+0x544/0x5d0 vfs_mkdir+0x5d0/0x980 do_mkdirat+0x14e/0x220 __x64_sys_mkdir+0x6a/0x80 do_syscall_64+0x39/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 14: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x40 __kasan_slab_free+0x114/0x1b0 kmem_cache_free+0xee/0x4e0 xfs_inode_free_callback+0x187/0x2a0 rcu_do_batch+0x317/0xce0 rcu_core+0x686/0xa90 __do_softirq+0x1b6/0x626 The buggy address belongs to the object at ffff888022f74758 which belongs to the cache xfs_ili of size 200 The buggy address is located 48 bytes inside of 200-byte region [ffff888022f74758, ffff888022f74820) The buggy address belongs to the physical page: page:ffffea00008bdd00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x22f74 head:ffffea00008bdd00 order:1 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 flags: 0x1fffff80010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) raw: 001fffff80010200 ffff888010ed4040 ffffea00008b2510 ffffea00008bde10 raw: 0000000000000000 00000000001a001a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888022f74680: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc ffff888022f74700: fc fc fc fc fc fc fc fc fc fc fc fa fb fb fb fb >ffff888022f74780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888022f74800: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc ffff888022f74880: fc fc 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== When push inode item in xfsaild, it will race with reclaim inodes task. Consider the following call graph, both tasks deal with the same inode. During flushing the cluster, it will enter xfs_iflush_abort() in shutdown conditions, inode's XFS_IFLUSHING flag will be cleared and lip->li_buf set to null. Concurrently, inode will be reclaimed in shutdown conditions, there is no need to wait xfs buf lock because of lip->li_buf is null at this time, inode will be freed via rcu callback if xfsaild task schedule out during flushing the cluster. so, it is unsafe to reference lip after flushing the cluster in xfs_inode_item_push(). <log item is in AIL> <filesystem shutdown> spin_lock(&ailp->ail_lock) xfs_inode_item_push(lip) xfs_buf_trylock(bp) spin_unlock(&lip->li_ailp->ail_lock) xfs_iflush_cluster(bp) if (xfs_is_shutdown()) xfs_iflush_abort(ip) xfs_trans_ail_delete(ip) spin_lock(&ailp->ail_lock) spin_unlock(&ailp->ail_lock) xfs_iflush_abort_clean(ip) error = -EIO <log item removed from AIL> <log item li_buf set to null> if (error) xfs_force_shutdown() xlog_shutdown_wait(mp->m_log) might_sleep() xfs_reclaim_inode(ip) if (shutdown) xfs_iflush_shutdown_abort(ip) if (!bp) xfs_iflush_abort(ip) return __xfs_inode_free(ip) call_rcu(ip, xfs_inode_free_callback) ...... <rcu grace period expires> <rcu free callbacks run somewhere> xfs_inode_free_callback(ip) kmem_cache_free(ip->i_itemp) ...... <starts running again> xfs_buf_ioend_fail(bp); xfs_buf_ioend(bp) xfs_buf_relse(bp); return error spin_lock(&lip->li_ailp->ail_lock) <UAF on log item> Additionally, after xfsaild_push_item(), the tracepoints can still access the log item, potentially causing a UAF. I've previously submitted two versions [1][2] attempting to solve this issue, but the solutions had flaws. Fix it by returning XFS_ITEM_UNSAFE in xfs_inode_item_push() when the log item might be freed, ensuring xfsaild does not access the log item after it is pushed. [1] https://patchwork.kernel.org/project/xfs/patch/20230211022941.GA1515023@ceph-admin/ [2] https://patchwork.kernel.org/project/xfs/patch/20230722025721.312909-1-leo.lilong@huawei.com/ Fixes: 90c60e1 ("xfs: xfs_iflush() is no longer necessary") Signed-off-by: Long Li <leo.lilong@huawei.com>
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
Oct 11, 2024
Two bugs cause torvalds#89 issue, * Unable to deboost task when time slice expired. * New forked task is running at MAX_PRIORITY_ADJ.
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
Oct 11, 2024
This is caused by previous fix code for torvalds#89, new forked tasks doesn't deboost quickly enough and impact run time of existed tasks with same priority. boost/deboost strategy need further adjustment, but rule is: task should be deboost when renew time slice.
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
Oct 11, 2024
This is BMQ boost priority adjustment after the just fix commit for torvalds#89.
adam900710
added a commit
to adam900710/linux
that referenced
this pull request
Dec 11, 2024
[BUG]
Even with the recent double ordered extent freeing bugs fixed, there is
still a low chance to cause hang ordered extents that will never be able
to finish.
This is especially problematic if the block size (4K) is smaller than
page size (64K, aarch64), and can cause the following hang:
BTRFS info (device dm-3): checking UUID tree
BTRFS error (device dm-3): cow_file_range failed, root=446 inode=274 start=1523712 len=49152: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=446 inode=274 start=1523712 len=49152: -28
BTRFS error (device dm-3): failed to run delalloc range, root=446 ino=274 folio=1507328 submit_bitmap=4-15 start=1523712 len=49152: -28
BTRFS error (device dm-3): cow_file_range failed, root=3274 inode=283 start=454656 len=4096: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=3274 inode=283 start=454656 len=4096: -28
BTRFS error (device dm-3): failed to run delalloc range, root=3274 ino=283 folio=393216 submit_bitmap=15 start=454656 len=4096: -28
INFO: task kworker/u17:5:2948764 blocked for more than 122 seconds.
Not tainted 6.13.0-rc1-custom+ torvalds#89
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u17:5 state:D stack:0 pid:2948764 tgid:2948764 ppid:2 flags:0x00000008
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
Call trace:
__switch_to+0xf4/0x168 (T)
__schedule+0x32c/0x7a8
schedule+0x54/0x140
schedule_timeout+0xe8/0x140
__wait_for_common+0xf4/0x228
wait_for_completion+0x28/0x40
btrfs_wait_ordered_extents+0x2d0/0x400 [btrfs]
btrfs_wait_ordered_roots+0x148/0x238 [btrfs]
shrink_delalloc+0x164/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_metadata_space+0xc8/0x240 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
INFO: task fsstress:3706703 blocked for more than 122 seconds.
[CAUSE]
The above dmesg shows a case where run_delalloc_nocow() failed for a
range inside the folio, not covering the whole folio.
When run_delalloc_nocow() failed, we call
btrfs_cleanup_ordered_extents() inside btrfs_run_delalloc_range() to
finish involved ordered extents.
But if btrfs_cleanup_ordered_extents() is passed with @locked_folio, and
the range is inside the folio, btrfs_cleanup_ordered_extents() will not
call btrfs_mark_ordered_io_finished() to finish the ordered extents,
preventing the involved ordered extents from finishing.
[FIX]
Just do not pass @locked_folio into btrfs_cleanup_ordered_extents().
The @locked_folio parameter is only utilized to skip the
btrfs_mark_ordered_io_finished(), which should never be skipped at all.
Furthermore @locked_folio for btrfs_mark_ordered_io_finished() is only
to clear the ordered flags for folios, to co-operate with the
out-of-band dirty folio detection.
In our error handling case, the folios will already have their ordered
flags cleared inside btrfs_cleanup_ordered_extents(), so there is no
need to pass a @locked_folio into it.
Furthermore this is a long existing bug, and needs a backport, thus this
patch is the minimal fix.
There will be a later patch to remove the @locked_folio parameter
completely.
Fixes: d1051d6 ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents")
Signed-off-by: Qu Wenruo <wqu@suse.com>
adam900710
added a commit
to adam900710/linux
that referenced
this pull request
Dec 11, 2024
[BUG]
Even with the recent double ordered extent freeing bugs fixed, there is
still a low chance to cause hang ordered extents that will never be able
to finish.
This is especially problematic if the block size (4K) is smaller than
page size (64K, aarch64), and can cause the following hang:
BTRFS info (device dm-3): checking UUID tree
BTRFS error (device dm-3): cow_file_range failed, root=446 inode=274 start=1523712 len=49152: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=446 inode=274 start=1523712 len=49152: -28
BTRFS error (device dm-3): failed to run delalloc range, root=446 ino=274 folio=1507328 submit_bitmap=4-15 start=1523712 len=49152: -28
BTRFS error (device dm-3): cow_file_range failed, root=3274 inode=283 start=454656 len=4096: -28
BTRFS error (device dm-3): run_delalloc_nocow failed, root=3274 inode=283 start=454656 len=4096: -28
BTRFS error (device dm-3): failed to run delalloc range, root=3274 ino=283 folio=393216 submit_bitmap=15 start=454656 len=4096: -28
INFO: task kworker/u17:5:2948764 blocked for more than 122 seconds.
Not tainted 6.13.0-rc1-custom+ torvalds#89
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u17:5 state:D stack:0 pid:2948764 tgid:2948764 ppid:2 flags:0x00000008
Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
Call trace:
__switch_to+0xf4/0x168 (T)
__schedule+0x32c/0x7a8
schedule+0x54/0x140
schedule_timeout+0xe8/0x140
__wait_for_common+0xf4/0x228
wait_for_completion+0x28/0x40
btrfs_wait_ordered_extents+0x2d0/0x400 [btrfs]
btrfs_wait_ordered_roots+0x148/0x238 [btrfs]
shrink_delalloc+0x164/0x280 [btrfs]
flush_space+0x288/0x328 [btrfs]
btrfs_async_reclaim_metadata_space+0xc8/0x240 [btrfs]
process_one_work+0x228/0x680
worker_thread+0x1bc/0x360
kthread+0x100/0x118
ret_from_fork+0x10/0x20
INFO: task fsstress:3706703 blocked for more than 122 seconds.
[CAUSE]
The above dmesg shows a case where run_delalloc_nocow() failed for a
range inside the folio, not covering the whole folio.
When run_delalloc_nocow() failed, we call
btrfs_cleanup_ordered_extents() inside btrfs_run_delalloc_range() to
finish involved ordered extents.
But if btrfs_cleanup_ordered_extents() is passed with @locked_folio, and
the range is inside the folio, btrfs_cleanup_ordered_extents() will not
call btrfs_mark_ordered_io_finished() to finish the ordered extents,
preventing the involved ordered extents from finishing.
[FIX]
Just do not pass @locked_folio into btrfs_cleanup_ordered_extents().
The @locked_folio parameter is only utilized to skip the
btrfs_mark_ordered_io_finished(), which should never be skipped at all.
Furthermore @locked_folio for btrfs_mark_ordered_io_finished() is only
to clear the ordered flags for folios, to co-operate with the
out-of-band dirty folio detection.
In our error handling case, the folios will already have their ordered
flags cleared inside btrfs_cleanup_ordered_extents(), so there is no
need to pass a @locked_folio into it.
Furthermore this is a long existing bug, and needs a backport, thus this
patch is the minimal fix.
There will be a later patch to remove the @locked_folio parameter
completely.
Fixes: d1051d6 ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents")
Signed-off-by: Qu Wenruo <wqu@suse.com>
adam900710
added a commit
to adam900710/linux
that referenced
this pull request
Dec 12, 2024
[BUG] When running btrfs with block size (4K) smaller than page size (64K, aarch64), there is a very high chance to crash the kernel at generic/750, with the following messages: (before the call traces, there are 3 extra debug messages added) BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental BTRFS info (device dm-3): checking UUID tree hrtimer: interrupt took 5451385 ns BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs] CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ torvalds#89 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs] lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] Call trace: can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P) can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L) btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs] extent_writepage+0x10c/0x3b8 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x160 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x74/0xa0 start_delalloc_inodes+0x17c/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x17c/0x288 [btrfs] shrink_delalloc+0x11c/0x280 [btrfs] flush_space+0x288/0x328 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x228/0x680 worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0 CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ torvalds#89 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write) pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : process_one_work+0x110/0x680 lr : worker_thread+0x1bc/0x360 Call trace: process_one_work+0x110/0x680 (P) worker_thread+0x1bc/0x360 (L) worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 2-3 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x275bb9540000 from 0xffff800080000000 PHYS_OFFSET: 0xffff8fbba0000000 CPU features: 0x100,00000070,00801250,8201720b [CAUSE] The above warning is triggered immediately after the delalloc range failure, this happens in the following sequence: - Range [1568K, 1636K) is dirty 1536K 1568K 1600K 1636K 1664K | |/////////|////////| | Where 1536K, 1600K and 1664K are page boundaries (64K page size) - Enter extent_writepage() for page 1536K - Enter run_delalloc_nocow() with locked page 1536K and range [1568K, 1636K) This is due to the inode has preallocated extents. - Enter cow_file_range() with locked page 1536K and range [1568K, 1636K) - btrfs_reserve_extent() only reserved two extents The main loop of cow_file_range() only reserved two data extents, Now we have: 1536K 1568K 1600K 1636K 1664K | |<-->|<--->|/|///////| | 1584K 1596K Range [1568K, 1596K) has ordered extent reserved. - btrfs_reserve_extent() failed inside cow_file_range() for file offset 1596K This is already a bug in our space reservation code, but for now let's focus on the error handling path. Now cow_file_range() returned -ENOSPC. - btrfs_run_delalloc_range() do error cleanup Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range [1568K, 1636K) However btrfs_cleanup_ordered_extents() normally needs to skip the ranges inside the folio, as it will normally be cleaned up by extent_writepage(). But the check is not taking subpage cases into consideration at all, it will only skip the range if the page start >= the range start. In our case, the page start < the range start. So it doesn't skip the page range at all. This means all the ordered extents, both [1568K, 1584K) and [1584K, 1596K) will be marked as IOERR. And those two ordered extents have no more pending ios, it is marked finished, and *QUEUED* to be deleted from the io tree. - extent_writepage() do error cleanup Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K). Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the deletion from io tree is async, it may or may not happen at this timing. If the ranges are not yet removed, we will do double cleaning on those ranges, triggers the above ordered extent warnings. In theory there are other bugs, like the cleanup in extent_writepage() can cause double accounting on ranges that are submitted async (compression for example). But that's much harder to trigger because normally we do not mix regular and compression delalloc ranges. [FIX] The folio range split is already buggy and not subpage compatible. So instead of splitting the ordered extents cleanup into the folio range and out of folio range, do all the cleanup inside writepage_delalloc(). This fix involves: - Pass @null as locked_folio for btrfs_cleanup_ordered_extents() in btrfs_run_delalloc_range() - Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc() failed So all ordered extents are only cleaned up by btrfs_run_delalloc_range(). - Handle the ranges that has already ordered extents If part of the folio already has ordered extent allocated, and btrfs_run_delalloc_range() failed, we also need to cleanup that range. Now we have a concentrated error handling for ordered extents during btrfs_run_delalloc_range(). Cc: stable@vger.kernel.org # 5.15+ Fixes: e65f152 ("btrfs: refactor how we finish ordered extent io for endio functions") Signed-off-by: Qu Wenruo <wqu@suse.com>
adam900710
added a commit
to adam900710/linux
that referenced
this pull request
Dec 12, 2024
[BUG] When running btrfs with block size (4K) smaller than page size (64K, aarch64), there is a very high chance to crash the kernel at generic/750, with the following messages: (before the call traces, there are 3 extra debug messages added) BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental BTRFS info (device dm-3): checking UUID tree hrtimer: interrupt took 5451385 ns BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs] CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ torvalds#89 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs] lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] Call trace: can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P) can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L) btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs] extent_writepage+0x10c/0x3b8 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x160 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x74/0xa0 start_delalloc_inodes+0x17c/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x17c/0x288 [btrfs] shrink_delalloc+0x11c/0x280 [btrfs] flush_space+0x288/0x328 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x228/0x680 worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0 CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ torvalds#89 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write) pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : process_one_work+0x110/0x680 lr : worker_thread+0x1bc/0x360 Call trace: process_one_work+0x110/0x680 (P) worker_thread+0x1bc/0x360 (L) worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 2-3 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x275bb9540000 from 0xffff800080000000 PHYS_OFFSET: 0xffff8fbba0000000 CPU features: 0x100,00000070,00801250,8201720b [CAUSE] The above warning is triggered immediately after the delalloc range failure, this happens in the following sequence: - Range [1568K, 1636K) is dirty 1536K 1568K 1600K 1636K 1664K | |/////////|////////| | Where 1536K, 1600K and 1664K are page boundaries (64K page size) - Enter extent_writepage() for page 1536K - Enter run_delalloc_nocow() with locked page 1536K and range [1568K, 1636K) This is due to the inode has preallocated extents. - Enter cow_file_range() with locked page 1536K and range [1568K, 1636K) - btrfs_reserve_extent() only reserved two extents The main loop of cow_file_range() only reserved two data extents, Now we have: 1536K 1568K 1600K 1636K 1664K | |<-->|<--->|/|///////| | 1584K 1596K Range [1568K, 1596K) has ordered extent reserved. - btrfs_reserve_extent() failed inside cow_file_range() for file offset 1596K This is already a bug in our space reservation code, but for now let's focus on the error handling path. Now cow_file_range() returned -ENOSPC. - btrfs_run_delalloc_range() do error cleanup <<< ROOT CAUSE Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range [1568K, 1636K) Function btrfs_cleanup_ordered_extents() normally needs to skip the ranges inside the folio, as it will normally be cleaned up by extent_writepage(). Such split error handling is already problematic in the first place. What's worse is the folio range skipping itself, which is not taking subpage cases into consideration at all, it will only skip the range if the page start >= the range start. In our case, the page start < the range start, since for subpage cases we can have delalloc ranges inside the folio but not covering the folio. So it doesn't skip the page range at all. This means all the ordered extents, both [1568K, 1584K) and [1584K, 1596K) will be marked as IOERR. And those two ordered extents have no more pending ios, it is marked finished, and *QUEUED* to be deleted from the io tree. - extent_writepage() do error cleanup Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K). Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the deletion from io tree is async, it may or may not happen at this timing. If the ranges are not yet removed, we will do double cleaning on those ranges, triggers the above ordered extent warnings. In theory there are other bugs, like the cleanup in extent_writepage() can cause double accounting on ranges that are submitted async (compression for example). But that's much harder to trigger because normally we do not mix regular and compression delalloc ranges. [FIX] The folio range split is already buggy and not subpage compatible, it's introduced a long time ago where subpage support is not even considered. So instead of splitting the ordered extents cleanup into the folio range and out of folio range, do all the cleanup inside writepage_delalloc(). - Pass @null as locked_folio for btrfs_cleanup_ordered_extents() in btrfs_run_delalloc_range() - Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc() failed So all ordered extents are only cleaned up by btrfs_run_delalloc_range(). - Handle the ranges that already have ordered extents allocated If part of the folio already has ordered extent allocated, and btrfs_run_delalloc_range() failed, we also need to cleanup that range. Now we have a concentrated error handling for ordered extents during btrfs_run_delalloc_range(). Cc: stable@vger.kernel.org # 5.15+ Fixes: d1051d6 ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents") Signed-off-by: Qu Wenruo <wqu@suse.com>
intel-lab-lkp
pushed a commit
to intel-lab-lkp/linux
that referenced
this pull request
Dec 12, 2024
[BUG] When running btrfs with block size (4K) smaller than page size (64K, aarch64), there is a very high chance to crash the kernel at generic/750, with the following messages: (before the call traces, there are 3 extra debug messages added) BTRFS warning (device dm-3): read-write for sector size 4096 with page size 65536 is experimental BTRFS info (device dm-3): checking UUID tree hrtimer: interrupt took 5451385 ns BTRFS error (device dm-3): cow_file_range failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): run_delalloc_nocow failed, root=4957 inode=257 start=1605632 len=69632: -28 BTRFS error (device dm-3): failed to run delalloc range, root=4957 ino=257 folio=1572864 submit_bitmap=8-15 start=1605632 len=69632: -28 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 3020984 at ordered-data.c:360 can_finish_ordered_extent+0x370/0x3b8 [btrfs] CPU: 2 UID: 0 PID: 3020984 Comm: kworker/u24:1 Tainted: G OE 6.13.0-rc1-custom+ torvalds#89 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: events_unbound btrfs_async_reclaim_data_space [btrfs] pc : can_finish_ordered_extent+0x370/0x3b8 [btrfs] lr : can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] Call trace: can_finish_ordered_extent+0x370/0x3b8 [btrfs] (P) can_finish_ordered_extent+0x1ec/0x3b8 [btrfs] (L) btrfs_mark_ordered_io_finished+0x130/0x2b8 [btrfs] extent_writepage+0x10c/0x3b8 [btrfs] extent_write_cache_pages+0x21c/0x4e8 [btrfs] btrfs_writepages+0x94/0x160 [btrfs] do_writepages+0x74/0x190 filemap_fdatawrite_wbc+0x74/0xa0 start_delalloc_inodes+0x17c/0x3b0 [btrfs] btrfs_start_delalloc_roots+0x17c/0x288 [btrfs] shrink_delalloc+0x11c/0x280 [btrfs] flush_space+0x288/0x328 [btrfs] btrfs_async_reclaim_data_space+0x180/0x228 [btrfs] process_one_work+0x228/0x680 worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1605632 OE len=16384 to_dec=16384 left=0 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1622016 OE len=12288 to_dec=12288 left=0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 BTRFS critical (device dm-3): bad ordered extent accounting, root=4957 ino=257 OE offset=1634304 OE len=8192 to_dec=4096 left=0 CPU: 1 UID: 0 PID: 3286940 Comm: kworker/u24:3 Tainted: G W OE 6.13.0-rc1-custom+ torvalds#89 Hardware name: QEMU KVM Virtual Machine, BIOS unknown 2/2/2022 Workqueue: btrfs_work_helper [btrfs] (btrfs-endio-write) pstate: 404000c5 (nZcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : process_one_work+0x110/0x680 lr : worker_thread+0x1bc/0x360 Call trace: process_one_work+0x110/0x680 (P) worker_thread+0x1bc/0x360 (L) worker_thread+0x1bc/0x360 kthread+0x100/0x118 ret_from_fork+0x10/0x20 Code: f84086a1 f9000fe1 53041c21 b9003361 (f9400661) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 2-3 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: 0x275bb9540000 from 0xffff800080000000 PHYS_OFFSET: 0xffff8fbba0000000 CPU features: 0x100,00000070,00801250,8201720b [CAUSE] The above warning is triggered immediately after the delalloc range failure, this happens in the following sequence: - Range [1568K, 1636K) is dirty 1536K 1568K 1600K 1636K 1664K | |/////////|////////| | Where 1536K, 1600K and 1664K are page boundaries (64K page size) - Enter extent_writepage() for page 1536K - Enter run_delalloc_nocow() with locked page 1536K and range [1568K, 1636K) This is due to the inode has preallocated extents. - Enter cow_file_range() with locked page 1536K and range [1568K, 1636K) - btrfs_reserve_extent() only reserved two extents The main loop of cow_file_range() only reserved two data extents, Now we have: 1536K 1568K 1600K 1636K 1664K | |<-->|<--->|/|///////| | 1584K 1596K Range [1568K, 1596K) has ordered extent reserved. - btrfs_reserve_extent() failed inside cow_file_range() for file offset 1596K This is already a bug in our space reservation code, but for now let's focus on the error handling path. Now cow_file_range() returned -ENOSPC. - btrfs_run_delalloc_range() do error cleanup <<< ROOT CAUSE Call btrfs_cleanup_ordered_extents() with locked folio 1536K and range [1568K, 1636K) Function btrfs_cleanup_ordered_extents() normally needs to skip the ranges inside the folio, as it will normally be cleaned up by extent_writepage(). Such split error handling is already problematic in the first place. What's worse is the folio range skipping itself, which is not taking subpage cases into consideration at all, it will only skip the range if the page start >= the range start. In our case, the page start < the range start, since for subpage cases we can have delalloc ranges inside the folio but not covering the folio. So it doesn't skip the page range at all. This means all the ordered extents, both [1568K, 1584K) and [1584K, 1596K) will be marked as IOERR. And those two ordered extents have no more pending ios, it is marked finished, and *QUEUED* to be deleted from the io tree. - extent_writepage() do error cleanup Call btrfs_mark_ordered_io_finished() for the range [1536K, 1600K). Although ranges [1568K, 1584K) and [1584K, 1596K) are finished, the deletion from io tree is async, it may or may not happen at this timing. If the ranges are not yet removed, we will do double cleaning on those ranges, triggers the above ordered extent warnings. In theory there are other bugs, like the cleanup in extent_writepage() can cause double accounting on ranges that are submitted async (compression for example). But that's much harder to trigger because normally we do not mix regular and compression delalloc ranges. [FIX] The folio range split is already buggy and not subpage compatible, it's introduced a long time ago where subpage support is not even considered. So instead of splitting the ordered extents cleanup into the folio range and out of folio range, do all the cleanup inside writepage_delalloc(). - Pass @null as locked_folio for btrfs_cleanup_ordered_extents() in btrfs_run_delalloc_range() - Skip the btrfs_cleanup_ordered_extents() if writepage_delalloc() failed So all ordered extents are only cleaned up by btrfs_run_delalloc_range(). - Handle the ranges that already have ordered extents allocated If part of the folio already has ordered extent allocated, and btrfs_run_delalloc_range() failed, we also need to cleanup that range. Now we have a concentrated error handling for ordered extents during btrfs_run_delalloc_range(). Cc: stable@vger.kernel.org # 5.15+ Fixes: d1051d6 ("btrfs: Fix error handling in btrfs_cleanup_ordered_extents") Signed-off-by: Qu Wenruo <wqu@suse.com>
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
Dec 16, 2024
Two bugs cause torvalds#89 issue, * Unable to deboost task when time slice expired. * New forked task is running at MAX_PRIORITY_ADJ.
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
Dec 16, 2024
This is caused by previous fix code for torvalds#89, new forked tasks doesn't deboost quickly enough and impact run time of existed tasks with same priority. boost/deboost strategy need further adjustment, but rule is: task should be deboost when renew time slice.
honjow
pushed a commit
to 3003n/linux
that referenced
this pull request
Dec 16, 2024
This is BMQ boost priority adjustment after the just fix commit for torvalds#89.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
fix bug in ratelimit