Skip to content

ProNET

Jump to bottom
Kosha Ruparel edited this page Feb 23, 2023 · 1 revision

ProNET Training Directions

After completing the modules 1-4, you are strongly encouraged to practice administering the full CNB a minimum of 4 times (start to finish) to a practice participant before you record your Standardized Assessment video. The person you The practice links you will use for the project are below. **The best way to record the video is to use a video conference software (ex: Zoom, Teams, GoTo Meeting, BlueJeans) as your "meeting room". **

Please note, you will need to utilize BOTH of the links (administer the SPLLT link first, followed by the remaining task link) to administer the "full CNB assessment". Please refer to the Full Assessment Video in the CNB Training and Certification Platform for procedures.

(These links are only for use in practice sessions and should NOT Be used to assess participants upon completion of the CNB training process)

NOTE: You will need to create a unique SubjectID for the survey link, in order to administer the battery. For practice purposes, the unique SUBJECT ID for the two links should be your initials followed by the date in MMDDYYYY format. The brackets "[, ]" should be removed from the '=[ENTER SUBJECT ID HERE]'

For example, the test links for Allison Port's CNB Standardized Assessment session would have the subject ID of '=AMP08312021' for the assessment date of August 31, 2021

Please review the About Virtual Assessments section for details on how to create the Subject ID if you are unsure of how to proceed.

Helpful advice from the CNB Team:

  • Make sure both your camera is on AND the participant’s camera is on before you start the CNB
    • The person who is “completing the link” (aka clicking the buttons to respond to the trials) will be sharing their screen for that portion of the assessment.
    • So for example, you would start by creating the link for the practice participant with the SPLLT task ONLY link.
      • Instead of sending them the link you open the link for the SPLLT test (which has the participant's ID embedded on the end) on YOUR screen.(Remember, you dont send them the SPLLT link BECAUSE by sending the link to them, this action allows them to click on the buttons and effectively score their own data)
    • You SHOULD NOT share your screen during the SPLLT test administration The CNB Team will be able to determine the validity and the administration of the SPLLT based on the audio from the participant (in the video) and the scores entered in the database.
    • When the SPLLT test is done (that’s the only test part of that link), you will send them the link for the remainder battery, ask them to open the link on their computer, then share their screen.

Virtual CNB ProNET Order of Procedures

  1. Welcome participant and introduce the CNB
  2. Confirm cell phones are off
  3. Administer SPLLT task
  4. Send participant the link for their battery in the chat feature of your video conference software
  5. Ask participant to open the link on their computer
  6. Ask participant to share their screen
  7. Administer all tasks in the remainder CNB battery
  8. Make sure to offer the break point at the halfway mark!
  9. When CNB is completed, thank the participant for their efforts!
  10. When you have a moment without the participant present, enter your notes into the virtual platform
  11. Export your data via CSV and upload to main project database.

About Penn CNB Training

Clone this wiki locally