Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Stop timer when M140 has target temp below mintemp #16849

Merged
merged 1 commit into from
Feb 14, 2020

Conversation

gdombiak
Copy link
Contributor

Requirements

  1. Print from OctoPrint
  2. Have the following as end g-code

M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed

At the end of the print, check LCD menu and you will see that Marlin thinks that we are still printing. That sequence of gcode used to work fine until Marlin 2.0.1. I found this PR #16749 that solves a problem with M104. With this PR we are going to be full backwards compatible.

Description

The fix was to call thermalManager.check_timer_autostart when executing M140. Just like it is done when executing M104. With this fix the order of gcode commands does not matter.

Benefits

Makes Marlin backwards compatible by accepting any order between M140 & M104

Related Issues

#16749

@gdombiak
Copy link
Contributor Author

No idea what is that build failure with ESP32#panic(). Didn't make changes that should affect that.

@thinkyhead
Copy link
Member

The ESP32 thing is due to a change in the platform. We'll just have to specify the previous version on the platform designator.

@thinkyhead
Copy link
Member

thinkyhead commented Feb 14, 2020

Thanks for the patch. This is actually a longstanding behavior of Marlin, that it doesn't (always) start or terminate the print job timer when the bed temp goes to zero (though it looks like someone wanted it to). Historically it seemed to only consider the hotend temperature relevant to the timer. But, since I recently changed the temperature-based print job behavior to look at both, this addition is needed for consistency (and to fix a longstanding bad behavior). Although this changes Marlin's behavior to include bed heating time in the duration of the print job, that is the same as hosts! so… Sorry users, your prints will now take "a few minutes longer" than before!

@thinkyhead thinkyhead merged commit 082117c into MarlinFirmware:bugfix-2.0.x Feb 14, 2020
StJa added a commit to StJa/Marlin that referenced this pull request Mar 9, 2020
* Add sanity-check for new Advanced Pause option

Followup to MarlinFirmware#16372

* Include macros for delta ABC

* Update Russian language (MarlinFirmware#16745)

* Fix BTT SKR 1.4 extra endstop pins (MarlinFirmware#16738)

* Option for Trigorilla 1.4 with add-on endstops board (MarlinFirmware#16737)

* Consistent M112 with Emergency Parser (MarlinFirmware#16747)

* Improve mfadd helper script

- Use the original branch name if none is supplied
- Set the remote tracking to the source
- Accept User/Branch or User:Branch syntax

* Clean up i2c encoder, sanitize serial

* Misc cleanup, whitespace

* Encapsulate probe as singleton class (MarlinFirmware#16751)

* G34 automatic point assignment (MarlinFirmware#16473)

* Fix Temperature::over_autostart_threshold (MarlinFirmware#16749)

* Update Russian language (MarlinFirmware#16750)

* Fix CURRENT_STEP_DOWN compile error

* Drop obsolete SD special char handling

See MarlinFirmware#14035

* Probe singleton patch

Followup to MarlinFirmware#16751

* Fix RGB / Neopixel white color bug

See MarlinFirmware#16752

* Suppress a compile warning

* More 8-extruder fixups

* Add EXP labels to SKR pins

* Fix LPC build with USE_WATCHDOG off

* Minor string storage optimization

* Apply REPEAT, RREPEAT, and loop macros (MarlinFirmware#16757)

* Revert breaking change to _FAN_PWM macro

* Add Z_AFTER_HOMING to raise Z more in G28 (MarlinFirmware#16755)

* Corner Leveling: Add inset for each side (MarlinFirmware#16759)

* (c) 2020

* Tweak mfqp script

* Use a different Configurations branch for CI

* Fix LCD Z Move character LCD display line (MarlinFirmware#16772)

* Fix warning for ESP32 (MarlinFirmware#16771)

* [cron] Bump distribution date

* Force T0 in UBL G29 on all multi-hotend setups (MarlinFirmware#16774)

* Keep secure credentials in a separate config file (MarlinFirmware#16773)

* STM32duino - Use SDIO for onboard SD (MarlinFirmware#16756)

* Fix E stepper stays on bug

Fixes MarlinFirmware#16753

* Fix Arduino IDE compile for DUE

Fixes MarlinFirmware#16767

* Fix CALIBRATION_GCODE pin handling

* Upgrade an ifdef

* More updates for 8 extruders, REPEAT

* [cron] Bump distribution date (2020-02-05)

* Add MKS Base 1.6 board (MarlinFirmware#16783)

* Direct download link for configs

* [cron] Bump distribution date (2020-02-06)

* Split up MKS_RUMBA32 into two variants (MarlinFirmware#16781)

* G26: Allow to set retraction for UBL mesh test (MarlinFirmware#16511)

* Remove extraneous Serial init (MarlinFirmware#16794)

* Fix probe with multi-endstops (MarlinFirmware#16793)

* [cron] Bump distribution date (2020-02-07)

* [cron] Bump distribution date (2020-02-08)

* Clean up Makefle indentation

* Add .editorconfig file

* Tweak ABL logging, document probing

* [cron] Bump distribution date (2020-02-09)

* Coolstep for TMC2130, 2209, 5130, 5160 (MarlinFirmware#16790)

* Better probe fail handling (MarlinFirmware#16811)

* Adafruit Grand Central M4 fixes (MarlinFirmware#16812)

* Minor HAL cleanup

* Move MSG_MARLIN

* Show print time with PRINTER_EVENT_LEDS

* Tweak parser warning

* Bump config version to 020004 (MarlinFirmware#16816)

* Add PID, probe offsets to ExtUI (MarlinFirmware#16792)

* [cron] Bump distribution date (2020-02-10)

* Tweak LPC1768 upload py script

* Add mftest -b (auto-build) and -u (upload)

- Implement the equivalent of auto-build for the shell environment by using the MOTHERBOARD setting to look up the env: entries.

* Revert change to AXIS_DRIVER_TYPE_X2

- Revisit this to figure out why it breaks

* Revert "Coolstep for TMC2130, 2209, 5130, 5160"

Reverting MarlinFirmware#16790 as not ready for primetime.

* Add a caution to drivers.h

* Update MKS BASE and v1.6 pins (MarlinFirmware#16806)

* Add g-code quoted strings, improve stream code (MarlinFirmware#16818)

* Fix out-of-order M0 after SD printing

Fixes MarlinFirmware#14774

Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>

* Fix out-of-order M0 after SD printing

Fixes MarlinFirmware#14774

Co-Authored-By: tol2cj <tol2cj@users.noreply.github.com>

* Enable hotend / bed PID separately in ExtUI (MarlinFirmware#16827)

* Fix MKS Robin Nano platformio.ini entry (MarlinFirmware#16826)

* Unify step pulse timing of ISR / babystep (MarlinFirmware#16813)

* [cron] Bump distribution date (2020-02-11)

* Update SAMD51 EEPROM repo link (MarlinFirmware#16832)

* Undo driver type auto-assignment for now

Good general concept but needs more time to develop and group with a stepper suite.

* No Z sensorless req'd if homing with probe

Fixes MarlinFirmware#16674

* Recommend Z Safe Homing

Co-Authored-By: Vertabreaker <opyrus@hotmail.com>

* Use prior babystep delay method (MarlinFirmware#16833)

* Function-style critical section macros

* Fix up tests

* Simplify old safe homing sanity check

* Prevent pin glitches on out commutation (MarlinFirmware#16835)

Better for switching from pulled input to output and also set real output (with no input enabled).

* [cron] Bump distribution date (2020-02-12)

* Define MarlinSerial instances for DGUS (MarlinFirmware#16841)

* No limit needed on this raise

Remove an extraneous limit from MarlinFirmware#16811.

* [cron] Bump distribution date (2020-02-13)

* [cron] Bump distribution date (2020-02-14)

* Fix G-code line parsing (MarlinFirmware#16840)

* Ping the job timer in M140 (MarlinFirmware#16849)

* Remove unused queue.stopped_N (MarlinFirmware#16850)

* Don't assert safe homing for delta/scara

* Fix ESP32 warning, specify supported version

* Add ESPAsyncTCP to lib_ignore (MarlinFirmware#16844)

* Add RAMPS 1.4.4 to AGCM4 (MarlinFirmware#16606)

* Clean up host actions code (MarlinFirmware#16856)

* Optimize "Dismiss" string

* Clean up stepper and babystep (MarlinFirmware#16857)

* Fysetc S6 pins / LCD updates (MarlinFirmware#16830)

* [cron] Bump distribution date (2020-02-15)

* Fix mftest -b and -u. Add --help.

* Fix a BORG compile warning

* Fix byte-to-percent display

Fixes MarlinFirmware#16866

* Conceal float rounding errors on display

Fix MarlinFirmware#16866

* [cron] Bump distribution date (2020-02-16)

* Double ADC read frequency (MarlinFirmware#16864)

* EXPERIMENTAL integrated BABYSTEPPING (MarlinFirmware#16829)

* Show '*' for zero 'stst' flag

* Require TMCStepper 0.6.2

* Defer updated ADC

* Move SAMD51 Temperature timer to RTC (MarlinFirmware#16868)

* Fix unknown command on empty lines (MarlinFirmware#16867)

* Fix mftest -b -u line match

* Update French language (MarlinFirmware#16877)

* Put ESP32 I2S stepper task and Marlin on the same core (MarlinFirmware#16874)

* Fix babystep include, typos in stepper.cpp

Fix MarlinFirmware#16881

* [cron] Bump distribution date (2020-02-17)

* [cron] Bump distribution date (2020-02-18)

* [cron] Bump distribution date (2020-02-19)

* [cron] Bump distribution date (2020-02-20)

* Serial redirect for Move Command when stopping (MarlinFirmware#16906)

* [cron] Bump distribution date (2020-02-21)

* Single envs for specific boards

* Inline manage_inactivity, tweak autoreport_paused

* Function for CONFIG_ECHO_HEADING

* Show end prompt with Print Event LEDs

* Add a note on EEPROM todo

* Tweak process_line_done for speed

* More EEPROM cleanup

* Followup to autoreport patch (MarlinFirmware#16914)

See a1f026f

* Disable spreadcycle in tmc_enable_stallguard<2209> (MarlinFirmware#16890)

* Fix EEPROM errors with EXTRUDERS == 0 (MarlinFirmware#16898)

* Add PICA shields support (MarlinFirmware#16891)

* Tweak pins spacing, comments

* Version 2.0.4 Release

* [cron] Bump distribution date (2020-02-22)

* Use moves_free in ok_to_send

* Hotfix for Babystepping

* CoreXY Babystepping hotfix

* Use moves_free in ok_to_send

* [cron] Bump distribution date (2020-02-22)

* Hotfix for Babystepping

* [ESP32] Allow user to define pins for hardware Serial1 and Serial2 (MarlinFirmware#16918)

* CoreXY Babystepping hotfix

* Version 2.0.4.1 Release

* [cron] Bump distribution date (2020-02-23)

* Finish Custom User Menu sanity-check (MarlinFirmware#16917)

* Followup to babystep hotfix

* Fix M0/M1 broken wait loop (MarlinFirmware#16921)

* Define ANET_FULL_GRAPHICS_LCD pins for SKR 1.4 (MarlinFirmware#16928)

* Version 2.0.4.2 Release

* Suppress "packed member" warning

* Suppress "packed member" warning

* Commit last SD line before fileHasFinished

* Allow LCD_PIXEL_WIDTH/HEIGHT override

* Allow USE_GCODE_SUBCODES for debugging

* Sync Italian language (MarlinFirmware#16935)

* Reduce default TMC baudrate to 57600 with Software Serial (MarlinFirmware#16930)

* [cron] Bump distribution date (2020-02-24)

* Fix AXIS_HAS_SW_SERIAL

* Simplified E_AXIS_HAS macro

* "Init. Media" => "Attach Media"

* Fix Babystepping loop (again)

* BS_TOTAL_AXIS => BS_TOTAL_IND

* Allow Z_SAFE_HOMING_POINT outside bed (MarlinFirmware#16945)

* Restore tabs in Makefile (MarlinFirmware#16944)

* Fix card_eof error

* Version 2.0.4.3 Release

* Allow Z_SAFE_HOMING_POINT outside bed (MarlinFirmware#16945)

* Restore tabs in Makefile (MarlinFirmware#16944)

* Fix card_eof error

* [cron] Bump distribution date (2020-02-25)

* Update POWER_LOSS_PIN comment (MarlinFirmware#16957)

* Update Italian language (MarlinFirmware#16947)

* Fix LCD cutter/bed icons overlapping (MarlinFirmware#16956)

* Fix SKR 1.4 Turbo SD_DETECT_PIN (MarlinFirmware#16955)

* Fix the wait loop in M0 / M1

* [cron] Bump distribution date (2020-02-26)

* Ensure proper SD print completion (MarlinFirmware#16967)

* HAS_SDCARD_CONNECTION is more obsolete

* Fix GTR10 overlapping defines (MarlinFirmware#16976)

* Toolchange improvements (MarlinFirmware#16979)

* Language: "failsafe" => "Defaults"

* Use a STR_ prefix for non-translated strings

* Set LCD status for EEPROM errors (MarlinFirmware#16977)

* More serial strings

* Add LPC1768 Serial ports for pinsDebug (MarlinFirmware#16980)

* Correct SKR expansion port pins (MarlinFirmware#16974)

* String optimize followup

* Fix Trinamic pulse rate auto-assignment (MarlinFirmware#16966)

* Allow weird probe values in G33

* Serial strings in macros

* Sanity check for LPC serial pin conflict (MarlinFirmware#16981)

* Allow servo features in combination (MarlinFirmware#16960)

* Add TRAVEL_EXTRA_XYJERK option

See MarlinFirmware#16949

Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>

* Quick-homing sensorless back-off (MarlinFirmware#16872)

* Prevent park_point compile error

* More extra travel jerk changes

Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>

* Fix unified status bed temp display

* Allow print recovery after parking

* Case-insensitive g-code option (MarlinFirmware#16932)

* Define DIAG pins for MKS SGen-L

* Handle print completed LED event in M0

* [cron] Bump distribution date (2020-02-27)

* Fix planner.cpp compile (MarlinFirmware#16996)

* Update Slovak language (MarlinFirmware#17002)

* Version 2.0.4.4 Release

Co-authored-by: Scott Lahteine <github@thinkyhead.com>
Co-authored-by: Acenotass <44540957+Acenotass@users.noreply.github.com>
Co-authored-by: rebel1 <453277+rebel1@users.noreply.github.com>
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
Co-authored-by: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
Co-authored-by: ellensp <ellensp@hotmail.com>
Co-authored-by: felixstorm <felix.storm@glueckkanja.com>
Co-authored-by: Bob Kuhn <bob.kuhn@att.net>
Co-authored-by: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com>
Co-authored-by: Tanguy Pruvot <tpruvot@users.noreply.github.com>
Co-authored-by: Robby Candra <robbycandra.mail@gmail.com>
Co-authored-by: Robert Stein <robert.stein@requisis.com>
Co-authored-by: Fabio Santos <fabiosan@live.com>
Co-authored-by: Giuliano Zaro <3684609+GMagician@users.noreply.github.com>
Co-authored-by: Daniel Mazurkiewicz <daniel@latanie.info>
Co-authored-by: tol2cj <tol2cj@users.noreply.github.com>
Co-authored-by: proferabg <proferabg@users.noreply.github.com>
Co-authored-by: darksiah <siatam@gmail.com>
Co-authored-by: Vertabreaker <opyrus@hotmail.com>
Co-authored-by: Gaston Dombiak <gdombiak@gmail.com>
Co-authored-by: vivian-ng <vivian@maplerain.com>
Co-authored-by: George Fu <nailao_5918@163.com>
Co-authored-by: Karl Andersson <karl@iaccess.se>
Co-authored-by: Jamie <vector76@users.noreply.github.com>
Co-authored-by: ZMiguel Alves <zmiguel@users.noreply.github.com>
Co-authored-by: Marcio T <mlt4356-github@yahoo.com>
Co-authored-by: josedpedroso <josedpedroso@users.noreply.github.com>
Co-authored-by: Makoto Schoppert <makotosan@gmail.com>
Co-authored-by: Roman Moravčík <roman.moravcik@gmail.com>
@a1b0hph0b1a
Copy link

I'm stuck using 2.0.8.2 stable as I can't get the newest stable build to work on my board (yes, 2.0.9.2 bugfix does work, I just prefer to use a stable build as I leave my printers unattended). This is why I have been encountering this error in October 2021.

Another simple fix to this is to put an M77 as last line of End G-code in slicer or Octoprint.

Just thought I'd mention this if someone was still having issues with it.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
Development

Successfully merging this pull request may close these issues.

3 participants