Node Supported Devices
This page describes the list of devices and protocols SolarNode is known to have support for.
|
|
|
|
|
|
|
|
- Advantech ADAM 411x — collect data from any analogue or digital sensor supported by the ADAM 4117/4118 input module
- BACnet — collect data from BACnet/IP devices
- CAN Bus — collect data from CAN Bus devices (such as vehicles)
- DNP3 Server (Outstation) — publish data collected by other plugins and controls as a DNP3 Outstation, for DNP3 clients to connect to and control
- GPIO — read and write digital general-purpose I/O lines
- Modbus — collect data from any Modbus compatible device, over RS-485 (RTU) or TCP/IP
- Modbus Server — publish data collected by other plugins and controls as a Modbus TCP Server, for Modbus clients to connect to and control
- M-Bus — collect data from any M-Bus compatible device, both wired or wireless (via M-Bus wireless transceiver)
- Numato USB GPIO — read and write analog and digital general-purpose I/O lines
- Loxone Miniserver — collect data from devices connected to a Loxone miniserver
- OS statistics — collect operating statistics like CPU/RAM/disk utilization
- Owl CM160 wireless amp meter, via RFXCOM's RFXtrx433 USB transceiver
- Carrel-Electrade watt meters
- Cent-a-meter wireless amp meter, via RFXCOM's RFXtrx433 USB transceiver
- Deson Electric / Eastron Group SDM 120/220/630 series Wh meters
- eGauge energy meters
- Electro Industries/GaugeTech Shark 100 series energy meter
- Elkor WattsOn energy meter
- Hsiang Cheng EM 5610/5630 series Wh meters
- Schneider Electric iEM3255 series, ION6200 series, PM3200 series, PM5100 series energy meters
- Tesla Powerwall battery
- SunSpec Modbus compatible energy meters
- Advanced Energy 250TX series and 500NX series inverters
- CanadianSolar 50KTL-CT series inverters
- Enasolar inverter range
- Morningstar TS-45 charge controller
- Outback MX60 charge controller
- SMA inverter range
- SMA WebBox — collect data from SMA inverters and sensor devices connected to a WebBox
- Solectria PVI-3800 series inverters
- Solectria PVI-14-36TL series inverters
- SunSpec Modbus compatible inverters
- Xantrex inverter range, via freeware GT-View application
- AMS TSL2591 light sensor
- GSS CozIR CO2, temperature, and humidity sensor
- SMA Sunny Sensorbox — via an SMA WebBox
- WeatherFlow Tempest weather station
- New Zealand Wholesale Information Trading System
- New Zealand Metservice
- OpenWeatherMap
- Solcast
- Weather Channel
- WeatherFlow Tempest weather station
- Yr
- Automation Direct ClickPLC
- BACnet — set arbitrary object properties on BACnet/IP devices
- DNP3 Server (Outstation) — publish data collected by other plugins and controls as a DNP3 Outstation, for DNP3 clients to connect to and control
- GPIO — read and write digital general-purpose I/O lines
- LATA switch — toggle switches on/off
- LC Tech Relay — toggle a relay open/closed
- Loxone Miniserver — set Loxone control values
- Modbus control — set arbitrary Modbus register string/number values
- Modbus Server — publish data collected by other plugins and controls as a Modbus TCP Server, for Modbus clients to connect to and control
- Modbus switch — toggle a Modbus coil type register on/off
- Motion camera detection — detect motion from a video camera as image snapshots, and take snapshots on demand
- Numato USB GPIO — read and write analog and digital general-purpose I/O lines
- SMA Power Control Module — control the maximum power output of SMA inverters
- Stabiliti 30C Power Control System — collect metering data and perform on-demand load management (such as load shedding)
- GPSd — collect GPS telemetry data