5.15.6 #85
Closed
5.15.6 #85
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit c749301 upstream. For devices that explicitly asked for MODE SENSE(10) use, make sure that scsi_mode_sense() is called with a buffer of at least 8 bytes so that the sense header fits. Link: https://lore.kernel.org/r/20210820070255.682775-4-damien.lemoal@wdc.com Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9054fc6 upstream. Printk modifier %pfw is used to print the full path of the device name. This is obtained device by device until a device no longer has a parent. On ACPI getting the parent fwnode is done by calling acpi_get_parent() which tries to down() a semaphore. But local IRQs are now disabled in vprintk_store() before the mutex is acquired. This is obviously a problem. Luckily struct device, embedded in struct acpi_device, has a parent field already. Use that field to get the parent instead of relying on acpi_get_parent(). Fixes: 3bd32d6 ("lib/vsprintf: Add %pfw conversion specifier for printing fwnode names") Cc: 5.5+ <stable@vger.kernel.org> # 5.5+ Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 935dff3 upstream. Check cpc_desc against NULL in cppc_get_perf(), so it doesn't crash down the road if cpc_desc is NULL. Fixes: 0654cf0 ("ACPI: CPPC: Introduce cppc_get_nominal_perf()") Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa5721a upstream. At least some PL2303GC have a bcdDevice of 0x105 instead of 0x100 as the datasheet claims. Add it to the list of known release numbers for the HXN (G) type. Note the chip type could only be determined indirectly based on its package being of QFP type, which appears to only be available for PL2303GC. Fixes: 894758d ("USB: serial: pl2303: tighten type HXN (G) detection") Cc: stable@vger.kernel.org # 5.13 Reported-by: Anton Lundin <glance@acc.umu.se> Link: https://lore.kernel.org/r/20211123071613.GZ108031@montezuma.acc.umu.se Link: https://lore.kernel.org/r/20211123091017.30708-1-johan@kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e353f3e upstream. Add the following Telit LE910S1 composition: 0x9200: tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20211119140319.10448-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88459e3 upstream. Update the USB serial option driver support for the Fibocom FM101-GL Cat.6 LTE modules as there are actually several different variants. - VID:PID 2cb7:01a2, FM101-GL are laptop M.2 cards (with MBIM interfaces for /Linux/Chrome OS) - VID:PID 2cb7:01a4, FM101-GL for laptop debug M.2 cards(with adb interface for /Linux/Chrome OS) 0x01a2: mbim, tty, tty, diag, gnss 0x01a4: mbim, diag, tty, adb, gnss, gnss Here are the outputs of lsusb -v and usb-devices: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 86 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a2 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) Bus 002 Device 084: ID 2cb7:01a2 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a2 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x015d bNumInterfaces 6 bConfigurationValue 1 iConfiguration 4 MBIM_DUN_DUN_DIAG_NMEA bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 85 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=01a4 Rev= 5.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom FM101-GL Module S: SerialNumber=673326ce C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=896mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=(none) I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=(none) Bus 002 Device 085: ID 2cb7:01a4 Fibocom Wireless Inc. Fibocom FM101-GL Module Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.20 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 9 idVendor 0x2cb7 idProduct 0x01a4 bcdDevice 5.04 iManufacturer 1 Fibocom Wireless Inc. iProduct 2 Fibocom FM101-GL Module iSerial 3 673326ce bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0180 bNumInterfaces 7 bConfigurationValue 1 iConfiguration 4 MBIM_DIAG_DUN_ADB_GNSS_GNSS bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 896mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 14 bFunctionProtocol 0 iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 14 bInterfaceProtocol 0 iInterface 5 Fibocom FM101-GL LTE Modem CDC Header: bcdCDC 1.10 CDC Union: bMasterInterface 0 bSlaveInterface 1 CDC MBIM: bcdMBIMVersion 1.00 wMaxControlMessage 4096 bNumberFilters 32 bMaxFilterSize 128 wMaxSegmentSize 2048 bmNetworkCapabilities 0x20 8-byte ntb input size CDC MBIM Extended: bcdMBIMExtendedVersion 1.00 bMaxOutstandingCommandMessages 64 wMTU 1500 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 9 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 1 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 2 iInterface 6 MBIM Data Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8e EP 14 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 6 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x0f EP 15 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 8 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 64 iInterface 0 ** UNRECOGNIZED: 05 24 00 10 01 ** UNRECOGNIZED: 05 24 01 00 00 ** UNRECOGNIZED: 04 24 02 02 ** UNRECOGNIZED: 05 24 06 00 00 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 9 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0400 1x 1024 bytes bInterval 0 bMaxBurst 0 Signed-off-by: Mingjie Zhang <superzmj@fibocom.com> Link: https://lore.kernel.org/r/20211123133757.37475-1-superzmj@fibocom.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ad4a0b upstream. Added updating of request frame number for elapsed frames, otherwise frame number will remain as previous use of request. This will allow function driver to correctly track frames in case of Missed ISOC occurs. Added setting request actual length to 0 for elapsed frames. In Slave mode when pushing data to RxFIFO by dwords, request actual length incrementing accordingly. But before whole packet will be pushed into RxFIFO and send to host can occurs Missed ISOC and data will not send to host. So, in this case request actual length should be reset to 0. Fixes: 91bb163 ("usb: dwc2: gadget: Fix ISOC flow for BDMA and Slave") Cc: stable <stable@vger.kernel.org> Reviewed-by: John Keeping <john@metanate.com> Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Link: https://lore.kernel.org/r/c356baade6e9716d312d43df08d53ae557cb8037.1636011277.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 310780e upstream. A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this). drivers/usb/dwc2/hcd_queue.c:1744:25: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it delay = ktime_set(0, DWC2_RETRY_WAIT_DELAY); ^ drivers/usb/dwc2/hcd_queue.c:62:34: note: expanded from macro 'DWC2_RETRY_WAIT_DELAY' #define DWC2_RETRY_WAIT_DELAY (1 * 1E6L) ^ 1 error generated. This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'. There is no visible reason for a floating point value in this driver, as the value is only used as a parameter to a function that expects an integer type. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error. Link: ClangBuiltLinux#1497 Link: llvm/llvm-project@a8083d4 Fixes: 6ed30a7 ("usb: dwc2: host: use hrtimer for NAK retries") Cc: stable <stable@vger.kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: John Keeping <john@metanate.com> Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211105145802.2520658-1-nathan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47ce459 upstream. in case of a PCI dwc3 controller, leave the default DMA mask. Calling of a 64 bit DMA mask breaks the driver on cherrytrail based tablets like Cyberbook T116. Fixes: 45d3944 ("usb: dwc3: support 64 bit DMA in platform driver") Cc: stable <stable@vger.kernel.org> Reported-by: Hans De Goede <hdegoede@redhat.com> Tested-by: Fabio Aiuto <fabioaiuto83@gmail.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com> Link: https://lore.kernel.org/r/20211113142959.27191-1-fabioaiuto83@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 250fdab upstream. During our predesign phase for DWC_usb32, the GHWPARAMS9 register offset was 0xc680. We revised our final design, and the GHWPARAMS9 offset is now moved to 0xc6e8 on release. Fixes: 1671038 ("usb: dwc3: Capture new capability register GHWPARAMS9") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1541737108266a97208ff827805be1f32852590c.1635202893.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d74dc3e upstream. The End Transfer command from a stream endpoint will generate a NoStream event, and we should ignore it. Currently we set the flag DWC3_EP_IGNORE_NEXT_NOSTREAM to track this prior to sending the command, and it will be cleared on the next stream event. However, a stream event may be generated before the End Transfer command completion and prematurely clear the flag. Fix this by setting the flag on End Transfer completion instead. Fixes: 140ca4c ("usb: dwc3: gadget: Handle stream transfers") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/cee1253af4c3600edb878d11c9c08b040817ae23.1635203975.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63c4c32 upstream. The programming guide noted that the driver needs to verify if the link state is in U0 before executing the Start Transfer command. If it's not in U0, the driver needs to perform remote wakeup. This is not accurate. If the link state is in U1/U2, then the controller will not respond to link recovery request from DCTL.ULSTCHNGREQ. The Start Transfer command will trigger a link recovery if it is in U1/U2. A clarification will be added to the programming guide for all controller versions. The current implementation shouldn't cause any functional issue. It may occasionally report an invalid time out warning from failed link recovery request. The driver will still go ahead with the Start Transfer command if the remote wakeup fails. The new change only initiates remote wakeup where it is needed, which is when the link state is in L1/L2/U3. Fixes: c36d8e9 ("usb: dwc3: gadget: put link to U0 before Start Transfer") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/05b4a5fbfbd0863fc9b1d7af934a366219e3d0b4.1635204761.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2628844 upstream. In the endpoint interrupt functions dwc3_gadget_endpoint_transfer_in_progress() and dwc3_gadget_endpoint_trbs_complete() will dereference the endpoint descriptor. But it could be cleared in __dwc3_gadget_ep_disable() when accessory disconnected. So we need to check whether it is null or not before dereferencing it. Fixes: f09ddcf ("usb: dwc3: gadget: Prevent EP queuing while stopping transfers") Cc: stable <stable@vger.kernel.org> Reviewed-by: Jack Pham <quic_jackp@quicinc.com> Signed-off-by: Albert Wang <albertccwang@google.com> Link: https://lore.kernel.org/r/20211109092642.3507692-1-albertccwang@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a049a30 upstream. The smsc95xx driver is dropping phy speed settings and causing a stack trace at device unbind: [ 536.379147] smsc95xx 2-1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.2-1, smsc95xx USB 2.0 Ethernet [ 536.425029] ------------[ cut here ]------------ [ 536.429650] WARNING: CPU: 0 PID: 439 at fs/kernfs/dir.c:1535 kernfs_remove_by_name_ns+0xb8/0xc0 [ 536.438416] kernfs: can not remove 'attached_dev', no directory [ 536.444363] Modules linked in: xts dm_crypt dm_mod atmel_mxt_ts smsc95xx usbnet [ 536.451748] CPU: 0 PID: 439 Comm: sh Tainted: G W 5.15.0 #1 [ 536.458636] Hardware name: Freescale i.MX53 (Device Tree Support) [ 536.464735] Backtrace: [ 536.467190] [<80b1c904>] (dump_backtrace) from [<80b1cb48>] (show_stack+0x20/0x24) [ 536.474787] r7:000005ff r6:8035b294 r5:600f0013 r4:80d8af78 [ 536.480449] [<80b1cb28>] (show_stack) from [<80b1f764>] (dump_stack_lvl+0x48/0x54) [ 536.488035] [<80b1f71c>] (dump_stack_lvl) from [<80b1f788>] (dump_stack+0x18/0x1c) [ 536.495620] r5:00000009 r4:80d9b820 [ 536.499198] [<80b1f770>] (dump_stack) from [<80124fac>] (__warn+0xfc/0x114) [ 536.506187] [<80124eb0>] (__warn) from [<80b1d21c>] (warn_slowpath_fmt+0xa8/0xdc) [ 536.513688] r7:000005ff r6:80d9b820 r5:80d9b8e0 r4:83744000 [ 536.519349] [<80b1d178>] (warn_slowpath_fmt) from [<8035b294>] (kernfs_remove_by_name_ns+0xb8/0xc0) [ 536.528416] r9:00000001 r8:00000000 r7:824926dc r6:00000000 r5:80df6c2c r4:00000000 [ 536.536162] [<8035b1dc>] (kernfs_remove_by_name_ns) from [<80b1f56c>] (sysfs_remove_link+0x4c/0x50) [ 536.545225] r6:7f00f02c r5:80df6c2c r4:83306400 [ 536.549845] [<80b1f520>] (sysfs_remove_link) from [<806f9c8c>] (phy_detach+0xfc/0x11c) [ 536.557780] r5:82492000 r4:83306400 [ 536.561359] [<806f9b90>] (phy_detach) from [<806f9cf8>] (phy_disconnect+0x4c/0x58) [ 536.568943] r7:824926dc r6:7f00f02c r5:82492580 r4:83306400 [ 536.574604] [<806f9cac>] (phy_disconnect) from [<7f00a310>] (smsc95xx_disconnect_phy+0x30/0x38 [smsc95xx]) [ 536.584290] r5:82492580 r4:82492580 [ 536.587868] [<7f00a2e0>] (smsc95xx_disconnect_phy [smsc95xx]) from [<7f001570>] (usbnet_stop+0x70/0x1a0 [usbnet]) [ 536.598161] r5:82492580 r4:82492000 [ 536.601740] [<7f001500>] (usbnet_stop [usbnet]) from [<808baa70>] (__dev_close_many+0xb4/0x12c) [ 536.610466] r8:83744000 r7:00000000 r6:83744000 r5:83745b74 r4:82492000 [ 536.617170] [<808ba9bc>] (__dev_close_many) from [<808bab78>] (dev_close_many+0x90/0x120) [ 536.625365] r7:00000001 r6:83745b74 r5:83745b8c r4:82492000 [ 536.631026] [<808baae8>] (dev_close_many) from [<808bf408>] (unregister_netdevice_many+0x15c/0x704) [ 536.640094] r9:00000001 r8:81130b98 r7:83745b74 r6:83745bc4 r5:83745b8c r4:82492000 [ 536.647840] [<808bf2ac>] (unregister_netdevice_many) from [<808bfa50>] (unregister_netdevice_queue+0xa0/0xe8) [ 536.657775] r10:8112bcc0 r9:83306c00 r8:83306c80 r7:8291e420 r6:83744000 r5:00000000 [ 536.665608] r4:82492000 [ 536.668143] [<808bf9b0>] (unregister_netdevice_queue) from [<808bfac0>] (unregister_netdev+0x28/0x30) [ 536.677381] r6:7f01003c r5:82492000 r4:82492000 [ 536.682000] [<808bfa98>] (unregister_netdev) from [<7f000b40>] (usbnet_disconnect+0x64/0xdc [usbnet]) [ 536.691241] r5:82492000 r4:82492580 [ 536.694819] [<7f000adc>] (usbnet_disconnect [usbnet]) from [<8076b958>] (usb_unbind_interface+0x80/0x248) [ 536.704406] r5:7f01003c r4:83306c80 [ 536.707984] [<8076b8d8>] (usb_unbind_interface) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc) [ 536.718005] r10:8112bcc0 r9:80dff1dc r8:83306c80 r7:83744000 r6:7f01003c r5:00000000 [ 536.725838] r4:8291e420 [ 536.728373] [<80617498>] (device_release_driver_internal) from [<80617684>] (device_release_driver+0x20/0x24) [ 536.738302] r7:83744000 r6:810d4f4c r5:8291e420 r4:8176ae30 [ 536.743963] [<80617664>] (device_release_driver) from [<806156cc>] (bus_remove_device+0xf0/0x148) [ 536.752858] [<806155dc>] (bus_remove_device) from [<80610018>] (device_del+0x198/0x41c) [ 536.760880] r7:83744000 r6:8116e2e4 r5:8291e464 r4:8291e420 [ 536.766542] [<8060fe80>] (device_del) from [<80768fe8>] (usb_disable_device+0xcc/0x1e0) [ 536.774576] r10:8112bcc0 r9:80dff1dc r8:00000001 r7:8112bc48 r6:8291e400 r5:00000001 [ 536.782410] r4:83306c00 [ 536.784945] [<80768f1c>] (usb_disable_device) from [<80769c30>] (usb_set_configuration+0x514/0x8dc) [ 536.794011] r10:00000000 r9:00000000 r8:832c3600 r7:00000004 r6:810d5688 r5:00000000 [ 536.801844] r4:83306c00 [ 536.804379] [<8076971c>] (usb_set_configuration) from [<80775fac>] (usb_generic_driver_disconnect+0x34/0x38) [ 536.814236] r10:832c3610 r9:83745ef8 r8:832c3600 r7:00000004 r6:810d5688 r5:83306c00 [ 536.822069] r4:83306c00 [ 536.824605] [<80775f78>] (usb_generic_driver_disconnect) from [<8076b850>] (usb_unbind_device+0x30/0x70) [ 536.834100] r5:83306c00 r4:810d5688 [ 536.837678] [<8076b820>] (usb_unbind_device) from [<8061765c>] (device_release_driver_internal+0x1c4/0x1cc) [ 536.847432] r5:822fb480 r4:83306c80 [ 536.851009] [<80617498>] (device_release_driver_internal) from [<806176a8>] (device_driver_detach+0x20/0x24) [ 536.860853] r7:00000004 r6:810d4f4c r5:810d5688 r4:83306c80 [ 536.866515] [<80617688>] (device_driver_detach) from [<80614d98>] (unbind_store+0x70/0xe4) [ 536.874793] [<80614d28>] (unbind_store) from [<80614118>] (drv_attr_store+0x30/0x3c) [ 536.882554] r7:00000000 r6:00000000 r5:83739200 r4:80614d28 [ 536.888217] [<806140e8>] (drv_attr_store) from [<8035cb68>] (sysfs_kf_write+0x48/0x54) [ 536.896154] r5:83739200 r4:806140e8 [ 536.899732] [<8035cb20>] (sysfs_kf_write) from [<8035be84>] (kernfs_fop_write_iter+0x11c/0x1d4) [ 536.908446] r5:83739200 r4:00000004 [ 536.912024] [<8035bd68>] (kernfs_fop_write_iter) from [<802b87fc>] (vfs_write+0x258/0x3e4) [ 536.920317] r10:00000000 r9:83745f58 r8:83744000 r7:00000000 r6:00000004 r5:00000000 [ 536.928151] r4:82adacc0 [ 536.930687] [<802b85a4>] (vfs_write) from [<802b8b0c>] (ksys_write+0x74/0xf4) [ 536.937842] r10:00000004 r9:007767a0 r8:83744000 r7:00000000 r6:00000000 r5:82adacc0 [ 536.945676] r4:82adacc0 [ 536.948213] [<802b8a98>] (ksys_write) from [<802b8ba4>] (sys_write+0x18/0x1c) [ 536.955367] r10:00000004 r9:83744000 r8:80100244 r7:00000004 r6:76f47b58 r5:76fc0350 [ 536.963200] r4:00000004 [ 536.965735] [<802b8b8c>] (sys_write) from [<80100060>] (ret_fast_syscall+0x0/0x48) [ 536.973320] Exception stack(0x83745fa8 to 0x83745ff0) [ 536.978383] 5fa0: 00000004 76fc0350 00000001 007767a0 00000004 00000000 [ 536.986569] 5fc0: 00000004 76fc0350 76f47b58 00000004 76f47c7c 76f48114 00000000 7e87991c [ 536.994753] 5fe0: 00000498 7e879908 76e6dce8 76eca2e8 [ 536.999922] ---[ end trace 9b835d809816b435 ]--- The driver should not be connecting and disconnecting the PHY when the device is opened and closed, it should be stopping and starting the PHY. The phy should be connected as part of binding and disconnected during unbinding. As this results in the PHY not being reset during open, link speed, etc. settings set prior to the link coming up are now not being lost. It is necessary for phy_stop() to only be called when the phydev still exists (resolving the above stack trace). When unbinding, ".unbind" will be called prior to ".stop", with phy_disconnect() already having called phy_stop() before the phydev becomes inaccessible. Signed-off-by: Martyn Welch <martyn.welch@collabora.com> Cc: Steve Glendinning <steve.glendinning@shawell.net> Cc: UNGLinuxDriver@microchip.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: stable@kernel.org # v5.15 Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c74312 upstream. When we try to add an IPv6 nexthop and IPv6 is not enabled (!CONFIG_IPV6) we'll hit a NULL pointer dereference[1] in the error path of nh_create_ipv6() due to calling ipv6_stub->fib6_nh_release. The bug has been present since the beginning of IPv6 nexthop gateway support. Commit 1aefd3d ("ipv6: Add fib6_nh_init and release to stubs") tells us that only fib6_nh_init has a dummy stub because fib6_nh_release should not be called if fib6_nh_init returns an error, but the commit below added a call to ipv6_stub->fib6_nh_release in its error path. To fix it return the dummy stub's -EAFNOSUPPORT error directly without calling ipv6_stub->fib6_nh_release in nh_create_ipv6()'s error path. [1] Output is a bit truncated, but it clearly shows the error. BUG: kernel NULL pointer dereference, address: 000000000000000000 #PF: supervisor instruction fetch in kernel modede #PF: error_code(0x0010) - not-present pagege PGD 0 P4D 0 Oops: 0010 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 638 Comm: ip Kdump: loaded Not tainted 5.16.0-rc1+ torvalds#446 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffff888109f5b8f0 EFLAGS: 00010286^Ac RAX: 0000000000000000 RBX: ffff888109f5ba28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8881008a2860 RBP: ffff888109f5b9d8 R08: 0000000000000000 R09: 0000000000000000 R10: ffff888109f5b978 R11: ffff888109f5b948 R12: 00000000ffffff9f R13: ffff8881008a2a80 R14: ffff8881008a2860 R15: ffff8881008a2840 FS: 00007f98de70f100(0000) GS:ffff88822bf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 0000000100efc000 CR4: 00000000000006e0 Call Trace: <TASK> nh_create_ipv6+0xed/0x10c rtm_new_nexthop+0x6d7/0x13f3 ? check_preemption_disabled+0x3d/0xf2 ? lock_is_held_type+0xbe/0xfd rtnetlink_rcv_msg+0x23f/0x26a ? check_preemption_disabled+0x3d/0xf2 ? rtnl_calcit.isra.0+0x147/0x147 netlink_rcv_skb+0x61/0xb2 netlink_unicast+0x100/0x187 netlink_sendmsg+0x37f/0x3a0 ? netlink_unicast+0x187/0x187 sock_sendmsg_nosec+0x67/0x9b ____sys_sendmsg+0x19d/0x1f9 ? copy_msghdr_from_user+0x4c/0x5e ? rcu_read_lock_any_held+0x2a/0x78 ___sys_sendmsg+0x6c/0x8c ? asm_sysvec_apic_timer_interrupt+0x12/0x20 ? lockdep_hardirqs_on+0xd9/0x102 ? sockfd_lookup_light+0x69/0x99 __sys_sendmsg+0x50/0x6e do_syscall_64+0xcb/0xf2 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f98dea28914 Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 48 8d 05 e9 5d 0c 00 8b 00 85 c0 75 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 41 89 d4 55 48 89 f5 53 RSP: 002b:00007fff859f5e68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e2e RAX: ffffffffffffffda RBX: 00000000619cb810 RCX: 00007f98dea28914 RDX: 0000000000000000 RSI: 00007fff859f5ed0 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000008 R10: fffffffffffffce6 R11: 0000000000000246 R12: 0000000000000001 R13: 000055c0097ae520 R14: 000055c0097957fd R15: 00007fff859f63a0 </TASK> Modules linked in: bridge stp llc bonding virtio_net Cc: stable@vger.kernel.org Fixes: 53010f9 ("nexthop: Add support for IPv6 gateways") Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…n probe commit d4d2e53 upstream. If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0) fails with something other than -ENODEV then it leads to an error pointer dereference. For those errors we should just jump directly to the error handling. Fixes: 8253a34 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle") Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117074923.GF5237@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3624688 upstream. The code that enables either BC_LVL or COMP_CHNG interrupt in tcpm_set_cc wrongly assumes that the interrupt is unmasked by writing 1 to the apropriate bit in the mask register. In fact, interrupts are enabled when the mask is 0, so the tcpm_set_cc enables interrupt for COMP_CHNG when it expects BC_LVL interrupt to be enabled. This causes inability of the driver to recognize cable unplug events in host mode (unplug is recognized only via a COMP_CHNG interrupt). In device mode this bug was masked by simultaneous triggering of the VBUS change interrupt, because of loss of VBUS when the port peer is providing power. Fixes: 48242e3 ("usb: typec: fusb302: Revert "Resolve fixed power role contract setup"") Cc: stable <stable@vger.kernel.org> Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ondrej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/20211108102833.2793803-1-megous@megous.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f2246 upstream. Older device-trees don't specify padctrl interrupt and xhci-tegra driver now fails to probe with -EINVAL using those device-trees. Check interrupt presence and keep runtime PM disabled if it's missing to fix the trouble. Fixes: 971ee24 ("usb: xhci: tegra: Enable ELPG for runtime/system PM") Cc: <stable@vger.kernel.org> # 5.14+ Reported-by: Nicolas Chauvet <kwizart@gmail.com> Tested-by: Nicolas Chauvet <kwizart@gmail.com> # T124 TK1 Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big Tested-by: Thierry Reding <treding@nvidia.com> # Tegra CI Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20211107224455.10359-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ae6dc2 upstream. xHC hardware can only have one slot in default state with address 0 waiting for a unique address at a time, otherwise "undefined behavior may occur" according to xhci spec 5.4.3.4 The address0_mutex exists to prevent this across both xhci roothubs. If hub_port_init() fails, it may unlock the mutex and exit with a xhci slot in default state. If the other xhci roothub calls hub_port_init() at this point we end up with two slots in default state. Make sure the address0_mutex protects the slot default state across hub_port_init() retries, until slot is addressed or disabled. Note, one known minor case is not fixed by this patch. If device needs to be reset during resume, but fails all hub_port_init() retries in usb_reset_and_verify_device(), then it's possible the slot is still left in default state when address0_mutex is unlocked. Cc: <stable@vger.kernel.org> Fixes: 638139e ("usb: hub: allow to process more usb hub events in parallel") Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211115221630.871204-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6cca13d upstream. Fix the circular lock dependency and unbalanced unlock of addess0_mutex introduced when fixing an address0_mutex enumeration retry race in commit ae6dc22d2d1 ("usb: hub: Fix usb enumeration issue due to address0 race") Make sure locking order between port_dev->status_lock and address0_mutex is correct, and that address0_mutex is not unlocked in hub_port_connect "done:" codepath which may be reached without locking address0_mutex Fixes: 6ae6dc2 ("usb: hub: Fix usb enumeration issue due to address0 race") Cc: <stable@vger.kernel.org> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20211123101656.1113518-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c21a80c upstream. This is a partial revert of commit 29bc22a ("binder: use euid from cred instead of using task"). Setting sender_euid using proc->cred caused some Android system test regressions that need further investigation. It is a partial reversion because subsequent patches rely on proc->cred. Fixes: 29bc22a ("binder: use euid from cred instead of using task") Cc: stable@vger.kernel.org # 4.4+ Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Todd Kjos <tkjos@google.com> Change-Id: I9b1769a3510fed250bb21859ef8beebabe034c66 Link: https://lore.kernel.org/r/20211112180720.2858135-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76c4718 upstream. The master and next_conj of rcs_ops are used for iterating the resource list entries, and currently those are supposed to return the current value. The problem is that next_conf may go over the last entry before the loop abort condition is evaluated, and it may return the "current" value that is beyond the array size. It was caught recently as a GPF, for example. Those return values are, however, never actually evaluated, hence basically we don't have to consider the current value as the return at all. By dropping those return values, the potential out-of-range access above is also fixed automatically. This patch changes the return type of master and next_conj callbacks to void and drop the superfluous code accordingly. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214985 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211118215729.26257-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 174a7fb upstream. This applies a SND_PCI_QUIRK(...) to the ASRock NUC Box 1100 series. This fixes the issue of the headphone jack not being detected unless warm rebooted from a certain other OS. When booting a certain other OS some coeff settings are changed that enable the audio jack. These settings are preserved on a warm reboot and can be easily dumped. The relevant indexes and values where gathered by naively diff-ing and reading a working and a non-working coeff dump. Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211112110704.1022501-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05ec716 upstream. HP ProBook 435 G7 (SSID 103c:8735) needs the similar quirk as another HP ProBook for enabling the mute and the mic-mute LEDs. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215021 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211118071636.14738-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13cbaa4 upstream. When the reply for a non-blocking transmit arrives, the sequence field for that reply was never filled in, so userspace would have no way of associating the reply to the original transmit. Copy the sequence field to ensure that this is now possible. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 0dbaceb ([media] cec: move the CEC framework out of staging and to media) Cc: <stable@vger.kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98400ad upstream. This reverts commit 279917e. With the CONFIG_HARDENED_USERCOPY option enabled, this patch triggers kernel bugs at runtime: usercopy: Kernel memory overwrite attempt detected to kernel text (offset 2084839, size 6)! kernel BUG at mm/usercopy.c:99! Backtrace: IAOQ[0]: usercopy_abort+0xc4/0xe8 [<00000000406ed1c8>] __check_object_size+0x174/0x238 [<00000000407086d4>] copy_strings.isra.0+0x3e8/0x708 [<0000000040709a20>] do_execveat_common.isra.0+0x1bc/0x328 [<000000004070b760>] compat_sys_execve+0x7c/0xb8 [<0000000040303eb8>] syscall_exit+0x0/0x14 The problem is, that we have an init section of at least 2MB size which starts at _stext and is freed after bootup. If then later some kernel data is (temporarily) stored in this free memory, check_kernel_text_object() will trigger a bug since the data appears to be inside the kernel text (>=_stext) area: if (overlaps(ptr, len, _stext, _etext)) usercopy_abort("kernel text"); Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@kernel.org # 5.4+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fb0413 upstream. The HID descriptor of many of Wacom's touch input devices include a "Confidence" usage that signals if a particular touch collection contains useful data. The driver does not look at this flag, however, which causes even invalid contacts to be reported to userspace. A lucky combination of kernel event filtering and device behavior (specifically: contact ID 0 == invalid, contact ID >0 == valid; and order all data so that all valid contacts are reported before any invalid contacts) spare most devices from any visibly-bad behavior. The DTH-2452 is one example of an unlucky device that misbehaves. It uses ID 0 for both the first valid contact and all invalid contacts. Because we report both the valid and invalid contacts, the kernel reports that contact 0 first goes down (valid) and then goes up (invalid) in every report. This causes ~100 clicks per second simply by touching the screen. This patch inroduces new `confidence` flag in our `hid_data` structure. The value is initially set to `true` at the start of a report and can be set to `false` if an invalid touch usage is seen. Link: linuxwacom/input-wacom#270 Fixes: f8b6a74 ("HID: wacom: generic: Support multiple tools per report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Joshua Dickens <joshua.dickens@wacom.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7865dd2 upstream. Commit b4a1ed0 ("fbdev: make FB_BACKLIGHT a tristate") forgot to update fbtft breaking its backlight support when FB_BACKLIGHT is a module. Since FB_TFT selects FB_BACKLIGHT there's no need for this conditional so just remove it and we're good. Fixes: b4a1ed0 ("fbdev: make FB_BACKLIGHT a tristate") Cc: <stable@vger.kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20211105204358.2991-1-noralf@tronnes.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffcf7ae upstream. snd_ctl_remove() has to be called with card->controls_rwsem held (when called after the card instantiation). This patch adds the missing rwsem calls around it. Fixes: 510e340 ("staging: greybus: audio: Add helper APIs for dynamic audio modules") Cc: stable <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211116072027.18466-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b535917 upstream. The free_rtllib() function frees the "dev" pointer so there is use after free on the next line. Re-arrange things to avoid that. Fixes: 6689817 ("staging: rtl8192e: Fix unload/reload problem") Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117072016.GA5237@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 244ee39 upstream. Apply the same check we do for dGPUs for APUs as well. Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53af98c upstream. Renoir and newer gfx9 APUs have new TSC register that is not part of the gfxoff tile, so it can be read without needing to disable gfx off. Acked-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211129181718.913038547@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…flags BugLink: [Replace -fcf-protection=none patch with new version] The gcc -fcf-protection=branch option is not compatible with -mindirect-branch=thunk-extern. The latter is used when CONFIG_RETPOLINE is selected, and this will fail to build with a gcc which has -fcf-protection=branch enabled by default. Adding -fcf-protection=none when building with retpoline support to prevents such build failures. Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
BugLink: http://bugs.launchpad.net/bugs/1585311 Signed-off-by: Andy Whitcroft <apw@canonical.com> Acked-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Brad Figg <brad.figg@canonical.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com>
The pin fixup is required to detect headset microphones on the oryp5. Fixes: 80690a2 ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509") Signed-off-by: Tim Crawford <tcrawford@system76.com>
…02112010437 Signed-off-by: Jeremy Soller <jeremy@system76.com>
This was referenced Dec 3, 2021
13r0ck
previously requested changes
Dec 6, 2021
|
Just to note, |
This is also happening in 5.15.5 and is not a regression in this PR. (I'm seeing it happen on the second suspend/resume on both 5.15.5 and 5.15.6.) |
|
Obsolete, see #100 |
jackpot51
pushed a commit
that referenced
this pull request
May 11, 2022
…sted [ Upstream commit 05d8af4 ] The current EOI handler for LEVEL triggered interrupts calls clk_enable(), register IO, clk_disable(). The clock manipulation requires locking which happens with IRQs disabled in clk_enable_lock(). Instead of turning the clock on and off all the time, enable the clock in case LEVEL interrupt is requested and keep the clock enabled until all LEVEL interrupts are freed. The LEVEL interrupts are an exception on this platform and seldom used, so this does not affect the common case. This simplifies the LEVEL interrupt handling considerably and also fixes the following splat found when using preempt-rt: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/locking/rtmutex.c:2040 __rt_mutex_trylock+0x37/0x62 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.109-rt65-stable-standard-00068-g6a5afc4b1217 #85 Hardware name: STM32 (Device Tree Support) [<c010a45d>] (unwind_backtrace) from [<c010766f>] (show_stack+0xb/0xc) [<c010766f>] (show_stack) from [<c06353ab>] (dump_stack+0x6f/0x84) [<c06353ab>] (dump_stack) from [<c01145e3>] (__warn+0x7f/0xa4) [<c01145e3>] (__warn) from [<c063386f>] (warn_slowpath_fmt+0x3b/0x74) [<c063386f>] (warn_slowpath_fmt) from [<c063b43d>] (__rt_mutex_trylock+0x37/0x62) [<c063b43d>] (__rt_mutex_trylock) from [<c063c053>] (rt_spin_trylock+0x7/0x16) [<c063c053>] (rt_spin_trylock) from [<c036a2f3>] (clk_enable_lock+0xb/0x80) [<c036a2f3>] (clk_enable_lock) from [<c036ba69>] (clk_core_enable_lock+0x9/0x18) [<c036ba69>] (clk_core_enable_lock) from [<c034e9f3>] (stm32_gpio_get+0x11/0x24) [<c034e9f3>] (stm32_gpio_get) from [<c034ef43>] (stm32_gpio_irq_trigger+0x1f/0x48) [<c034ef43>] (stm32_gpio_irq_trigger) from [<c014aa53>] (handle_fasteoi_irq+0x71/0xa8) [<c014aa53>] (handle_fasteoi_irq) from [<c0147111>] (generic_handle_irq+0x19/0x22) [<c0147111>] (generic_handle_irq) from [<c014752d>] (__handle_domain_irq+0x55/0x64) [<c014752d>] (__handle_domain_irq) from [<c0346f13>] (gic_handle_irq+0x53/0x64) [<c0346f13>] (gic_handle_irq) from [<c0100ba5>] (__irq_svc+0x65/0xc0) Exception stack(0xc0e01f18 to 0xc0e01f60) 1f00: 0000300c 00000000 1f20: 0000300c c010ff01 00000000 00000000 c0e00000 c0e07714 00000001 c0e01f78 1f40: c0e07758 00000000 ef7cd0ff c0e01f68 c010554b c0105542 40000033 ffffffff [<c0100ba5>] (__irq_svc) from [<c0105542>] (arch_cpu_idle+0xc/0x1e) [<c0105542>] (arch_cpu_idle) from [<c063be95>] (default_idle_call+0x21/0x3c) [<c063be95>] (default_idle_call) from [<c01324f7>] (do_idle+0xe3/0x1e4) [<c01324f7>] (do_idle) from [<c01327b3>] (cpu_startup_entry+0x13/0x14) [<c01327b3>] (cpu_startup_entry) from [<c0a00c13>] (start_kernel+0x397/0x3d4) [<c0a00c13>] (start_kernel) from [<00000000>] (0x0) ---[ end trace 0000000000000002 ]--- Power consumption measured on STM32MP157C DHCOM SoM is not increased or is below noise threshold. Fixes: 47beed5 ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@foss.st.com> Cc: Fabien Dessenne <fabien.dessenne@foss.st.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marc Zyngier <maz@kernel.org> Cc: linux-stm32@st-md-mailman.stormreply.com Cc: linux-arm-kernel@lists.infradead.org To: linux-gpio@vger.kernel.org Reviewed-by: Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20220421140827.214088-1-marex@denx.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mmstick
pushed a commit
that referenced
this pull request
Dec 11, 2023
commit 745f17a upstream. We got a WARNING in ext4_add_complete_io: ================================================================== WARNING: at fs/ext4/page-io.c:231 ext4_put_io_end_defer+0x182/0x250 CPU: 10 PID: 77 Comm: ksoftirqd/10 Tainted: 6.3.0-rc2 #85 RIP: 0010:ext4_put_io_end_defer+0x182/0x250 [ext4] [...] Call Trace: <TASK> ext4_end_bio+0xa8/0x240 [ext4] bio_endio+0x195/0x310 blk_update_request+0x184/0x770 scsi_end_request+0x2f/0x240 scsi_io_completion+0x75/0x450 scsi_finish_command+0xef/0x160 scsi_complete+0xa3/0x180 blk_complete_reqs+0x60/0x80 blk_done_softirq+0x25/0x40 __do_softirq+0x119/0x4c8 run_ksoftirqd+0x42/0x70 smpboot_thread_fn+0x136/0x3c0 kthread+0x140/0x1a0 ret_from_fork+0x2c/0x50 ================================================================== Above issue may happen as follows: cpu1 cpu2 ----------------------------|---------------------------- mount -o dioread_lock ext4_writepages ext4_do_writepages *if (ext4_should_dioread_nolock(inode))* // rsv_blocks is not assigned here mount -o remount,dioread_nolock ext4_journal_start_with_reserve __ext4_journal_start __ext4_journal_start_sb jbd2__journal_start *if (rsv_blocks)* // h_rsv_handle is not initialized here mpage_map_and_submit_extent mpage_map_one_extent dioread_nolock = ext4_should_dioread_nolock(inode) if (dioread_nolock && (map->m_flags & EXT4_MAP_UNWRITTEN)) mpd->io_submit.io_end->handle = handle->h_rsv_handle ext4_set_io_unwritten_flag io_end->flag |= EXT4_IO_END_UNWRITTEN // now io_end->handle is NULL but has EXT4_IO_END_UNWRITTEN flag scsi_finish_command scsi_io_completion scsi_io_completion_action scsi_end_request blk_update_request req_bio_endio bio_endio bio->bi_end_io > ext4_end_bio ext4_put_io_end_defer ext4_add_complete_io // trigger WARN_ON(!io_end->handle && sbi->s_journal); The immediate cause of this problem is that ext4_should_dioread_nolock() function returns inconsistent values in the ext4_do_writepages() and mpage_map_one_extent(). There are four conditions in this function that can be changed at mount time to cause this problem. These four conditions can be divided into two categories: (1) journal_data and EXT4_EXTENTS_FL, which can be changed by ioctl (2) DELALLOC and DIOREAD_NOLOCK, which can be changed by remount The two in the first category have been fixed by commit c8585c6 ("ext4: fix races between changing inode journal mode and ext4_writepages") and commit cb85f4d ("ext4: fix race between writepages and enabling EXT4_EXTENTS_FL") respectively. Two cases in the other category have not yet been fixed, and the above issue is caused by this situation. We refer to the fix for the first category, when applying options during remount, we grab s_writepages_rwsem to avoid racing with writepages ops to trigger this problem. Fixes: 6b523df ("ext4: use transaction reservation for extent conversion in ext4_end_io") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230524072538.2883391-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmstick
pushed a commit
that referenced
this pull request
Jul 6, 2024
[ Upstream commit 8ecf3c1 ] Recent additions in BPF like cpu v4 instructions, test_bpf module exhibits the following failures: test_bpf: #82 ALU_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #83 ALU_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #84 ALU64_MOVSX | BPF_B jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #85 ALU64_MOVSX | BPF_H jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #86 ALU64_MOVSX | BPF_W jited:1 ret 2 != 1 (0x2 != 0x1)FAIL (1 times) test_bpf: #165 ALU_SDIV_X: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #166 ALU_SDIV_K: -6 / 2 = -3 jited:1 ret 2147483645 != -3 (0x7ffffffd != 0xfffffffd)FAIL (1 times) test_bpf: #169 ALU_SMOD_X: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #170 ALU_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #172 ALU64_SMOD_K: -7 % 2 = -1 jited:1 ret 1 != -1 (0x1 != 0xffffffff)FAIL (1 times) test_bpf: #313 BSWAP 16: 0x0123456789abcdef -> 0xefcd eBPF filter opcode 00d7 (@2) unsupported jited:0 301 PASS test_bpf: #314 BSWAP 32: 0x0123456789abcdef -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 555 PASS test_bpf: #315 BSWAP 64: 0x0123456789abcdef -> 0x67452301 eBPF filter opcode 00d7 (@2) unsupported jited:0 268 PASS test_bpf: #316 BSWAP 64: 0x0123456789abcdef >> 32 -> 0xefcdab89 eBPF filter opcode 00d7 (@2) unsupported jited:0 269 PASS test_bpf: #317 BSWAP 16: 0xfedcba9876543210 -> 0x1032 eBPF filter opcode 00d7 (@2) unsupported jited:0 460 PASS test_bpf: #318 BSWAP 32: 0xfedcba9876543210 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 320 PASS test_bpf: #319 BSWAP 64: 0xfedcba9876543210 -> 0x98badcfe eBPF filter opcode 00d7 (@2) unsupported jited:0 222 PASS test_bpf: #320 BSWAP 64: 0xfedcba9876543210 >> 32 -> 0x10325476 eBPF filter opcode 00d7 (@2) unsupported jited:0 273 PASS test_bpf: torvalds#344 BPF_LDX_MEMSX | BPF_B eBPF filter opcode 0091 (@5) unsupported jited:0 432 PASS test_bpf: torvalds#345 BPF_LDX_MEMSX | BPF_H eBPF filter opcode 0089 (@5) unsupported jited:0 381 PASS test_bpf: torvalds#346 BPF_LDX_MEMSX | BPF_W eBPF filter opcode 0081 (@5) unsupported jited:0 505 PASS test_bpf: torvalds#490 JMP32_JA: Unconditional jump: if (true) return 1 eBPF filter opcode 0006 (@1) unsupported jited:0 261 PASS test_bpf: Summary: 1040 PASSED, 10 FAILED, [924/1038 JIT'ed] Fix them by adding missing processing. Fixes: daabb2b ("bpf/tests: add tests for cpuv4 instructions") Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/91de862dda99d170697eb79ffb478678af7e0b27.1709652689.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.6