Get your Pi set up

This looks like a lot, but it doesn't take long

Install needed packages

• sudo apt-get install git
• sudo apt-get install libncurses5-dev libncursesw5-dev (for running the core test/demo executables)
• sudo apt-get install geany (optional code editor for tinkering)
• sudo apt-get install doxygen (optional, for nice library documentation. Warning: requires just under a GB of storage)
• sudo apt-get install arduino (optional if you want to run the arduino i/f core)
• sudo apt-get install openjdk-7-jdk (optional for working on the experimental Logic Analyser project)

Download and install the bcm2835 library

Download the bcm2835 library from http://www.open.com.au/mikem/bcm2835/bcm2835-1.17.tar.gz

• gunzip bcm2835-1.17.tar.gz
• tar -xvf bcm2835-1.17.tar
• cd bcm2835-1.17
• ./configure
• make
• sudo make check
• sudo make install

Get the Guzunty Pi example code and cores

Make a folder for your Guzunty projects and change to it.

• mkdir Guzunty
• cd Guzunty
• git clone https://github.com/Guzunty/Pi.git

Make and install the Guzunty loader

• cd Pi/src/gz_load
• make
• sudo chmod a+x gz_load
• sudo cp gz_load /usr/bin

Make and install the Guzunty library (gzlib)

• cd ../gzlib/src
• make
• sudo make install

Enable SPI (optional, but needed for almost all cores)

Edit (as root) /etc/modprobe.d/raspi-blacklist.conf Insert # in front of the line: blacklist spi-bcm2708 Save and reboot

• sync
• sync
• sudo shutdown -r now