Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Operation not supported(-95) #27

Closed
IvanSelin opened this issue Mar 25, 2013 · 5 comments
Closed

Operation not supported(-95) #27

IvanSelin opened this issue Mar 25, 2013 · 5 comments

Comments

@IvanSelin
Copy link

Hello,
I am experiencing some problems with adding a mesh interface on a device D-Link DWA-160 H/W rev. A2, Carl9170 driver from compat.wireless.3.6
Any help will be appreciated
Log:

sudo iw dev wlan1 interface add mesh0 type mp mesh_id mymesh

As a result I have this:
command failed: Operation not supported (-95)

My system:
uname -a
Linux ubuntu 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

lsusb
Bus 001 Device 002: ID 07d1:3a09 D-Link System DWA-160 802.11abgn Xtreme N Dual Band Adapter(rev.A2) [Atheros AR9170+AR9104]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode](rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)

iw dev
phy#0
Interface wlan1
ifindex 3
type managed

iw list
Wiphy phy0
Band 1:
Capabilities: 0x184e
HT20/HT40
SM Power Save disabled
RX HT40 SGI
No RX STBC
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15, 32
Frequencies:
* 2412 MHz [1](20.0 dBm)
* 2417 MHz [2](20.0 dBm)
* 2422 MHz [3](20.0 dBm)
* 2427 MHz [4](20.0 dBm)
* 2432 MHz [5](20.0 dBm)
* 2437 MHz [6](20.0 dBm)
* 2442 MHz [7](20.0 dBm)
* 2447 MHz [8](20.0 dBm)
* 2452 MHz [9](20.0 dBm)
* 2457 MHz [10](20.0 dBm)
* 2462 MHz [11](20.0 dBm)
* 2467 MHz [12](20.0 dBm)
* 2472 MHz [13](20.0 dBm)
* 2484 MHz 14
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Band 2:
Capabilities: 0x184e
HT20/HT40
SM Power Save disabled
RX HT40 SGI
No RX STBC
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15, 32
Frequencies:
* 4920 MHz -16
* 4940 MHz -12
* 4960 MHz -8
* 4980 MHz -4
* 5040 MHz 8
* 5060 MHz 12
* 5080 MHz 16
* 5180 MHz 36
* 5200 MHz 40
* 5220 MHz 44
* 5240 MHz 48
* 5260 MHz 52
* 5280 MHz 56
* 5300 MHz 60
* 5320 MHz 64
* 5500 MHz 100
* 5520 MHz 104
* 5540 MHz 108
* 5560 MHz 112
* 5580 MHz 116
* 5600 MHz 120
* 5620 MHz 124
* 5640 MHz 128
* 5660 MHz 132
* 5680 MHz 136
* 5700 MHz 140
* 5745 MHz [149](30.0 dBm)
* 5765 MHz [153](30.0 dBm)
* 5785 MHz [157](30.0 dBm)
* 5805 MHz [161](30.0 dBm)
* 5825 MHz [165](30.0 dBm)
* 5170 MHz 34
* 5190 MHz 38
* 5210 MHz 42
* 5230 MHz 46
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Coverage class: 0 (up to 0m)
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* monitor
* P2P-client
* P2P-GO
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ managed, AP, P2P-client, P2P-GO } <= 2,
total <= 2, #channels <= 1
Supported commands:
* new_interface
* set_interface
* new_key
* new_beacon
* new_station
* new_mpath
* set_mesh_params
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* remain_on_channel
* set_tx_bitrate_mask
* action
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* Unknown command (84)
* Unknown command (87)
* Unknown command (85)
* testmode
* connect
* disconnect
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
Device supports RSN-IBSS.
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.

lsmod
Module Size Used by
arc4 12529 2
carl9170 81942 0
mac80211 549354 1 carl9170
ath 23827 1 carl9170
cfg80211 211363 3 carl9170,mac80211,ath
rfcomm 42651 0
bnep 18140 2
bluetooth 204950 10 rfcomm,bnep
compat 14949 6 carl9170,mac80211,cfg80211,rfcomm,bnep,bluetooth
binfmt_misc 17500 1
coretemp 13400 0
ppdev 17073 0
ext2 72880 1
psmouse 95552 0
snd_hda_codec_via 46478 1
microcode 22803 0
snd_hda_intel 33491 3
snd_hda_codec 134212 2 snd_hda_codec_via,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
lpc_ich 17061 0
snd_pcm 96580 2 snd_hda_intel,snd_hda_codec
snd_timer 29425 1 snd_pcm
snd 78734 12 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 15047 1 snd
i915 520519 3
parport_pc 32688 1
snd_page_alloc 18484 2 snd_hda_intel,snd_pcm
serio_raw 13215 0
asus_atk0110 17646 0
drm_kms_helper 46784 1 i915
drm 275528 4 i915,drm_kms_helper
i2c_algo_bit 13413 1 i915
video 19335 1 i915
mac_hid 13205 0
lp 17759 0
parport 46345 3 ppdev,parport_pc,lp
floppy 69452 1
atl1e 33208 0

Best regards,

Ivan Selin
@jcard0na
Copy link
Contributor

Hi Ivan,

iw seems to indicate mesh mode is not enabled. Maybe not compiled in
your kernel?

On Mon, Mar 25, 2013 at 8:23 AM, IvanSelin notifications@github.com wrote:

Supported interface modes:

  • IBSS
  • managed
  • AP
  • AP/VLAN
  • monitor
  • P2P-client
  • P2P-GO

Cheers,

Javier

Javier Cardona
cozybit Inc.
http://www.cozybit.com

@IvanSelin
Copy link
Author

Hello there
Still can't get this thing work
Hmm, mesh was enabled in kernel config.
Anyway, I've tried to install distro11s instead of using compat wireless to reduce the chance of getting any errors. But as a result I still have the same error (-95)
Best regards,
Ivan

@twpedersen
Copy link
Contributor

Hi Ivan,

I don't belive carl9170 received mesh support until 3.7 or so. Can you
please try the latest compat-drivers here:
http://drvbp1.linux-foundation.org/~mcgrof/rel-html/compat-drivers/?

On Mon, Mar 25, 2013 at 8:23 AM, IvanSelin notifications@github.com wrote:

Hello,
I am experiencing some problems with adding a mesh interface on a device
D-Link DWA-160 H/W rev. A2, Carl9170 driver from compat.wireless.3.6
Any help will be appreciated
Log:

sudo iw dev wlan1 interface add mesh0 type mp mesh_id mymesh

As a result I have this:
command failed: Operation not supported (-95)

My system:
uname -a
Linux ubuntu 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012
x86_64 x86_64 x86_64 GNU/Linux

lsusb
Bus 001 Device 002: ID 07d1:3a09 D-Link System DWA-160 802.11abgn Xtreme N
Dual Band Adapter(rev.A2) [Atheros AR9170+AR9104]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express
Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition
Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1
(rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2
(rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #1 #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #2 #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #3 #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI
Controller #4 #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller IDE
mode http://rev%2001
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 Ethernet controller: Atheros Communications Inc.
AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)

iw dev
phy#0
Interface wlan1
ifindex 3
type managed

iw list
Wiphy phy0
Band 1:
Capabilities: 0x184e
HT20/HT40
SM Power Save disabled
RX HT40 SGI
No RX STBC
Max AMSDU length: 7935 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 8 usec (0x06)
HT TX/RX MCS rate indexes supported: 0-15, 32
Frequencies:

  • 2412 MHz 1 http://20.0%20dBm
  • 2417 MHz 2 http://20.0%20dBm
  • 2422 MHz 3 http://20.0%20dBm
  • 2427 MHz 4 http://20.0%20dBm
  • 2432 MHz 5 http://20.0%20dBm
  • 2437 MHz 6 http://20.0%20dBm
  • 2442 MHz 7 http://20.0%20dBm
  • 2447 MHz 8 http://20.0%20dBm
  • 2452 MHz 9 http://20.0%20dBm
  • 2457 MHz 10 http://20.0%20dBm
  • 2462 MHz 11 http://20.0%20dBm
  • 2467 MHz 12 http://20.0%20dBm
  • 2472 MHz 13 http://20.0%20dBm
  • 2484 MHz 14 http://disabled
    Bitrates (non-HT):
  • 1.0 Mbps
  • 2.0 Mbps (short preamble supported)
  • 5.5 Mbps (short preamble supported)
  • 11.0 Mbps (short preamble supported)
  • 6.0 Mbps
  • 9.0 Mbps
  • 12.0 Mbps
  • 18.0 Mbps
  • 24.0 Mbps
  • 36.0 Mbps
  • 48.0 Mbps
  • 54.0 Mbps
    Band 2:
    Capabilities: 0x184e
    HT20/HT40
    SM Power Save disabled
    RX HT40 SGI
    No RX STBC
    Max AMSDU length: 7935 bytes
    DSSS/CCK HT40
    Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
    Minimum RX AMPDU time spacing: 8 usec (0x06)
    HT TX/RX MCS rate indexes supported: 0-15, 32
    Frequencies:
  • 4920 MHz -16 http://disabled
  • 4940 MHz -12 http://disabled
  • 4960 MHz -8 http://disabled
  • 4980 MHz -4 http://disabled
  • 5040 MHz 8 http://disabled
  • 5060 MHz 12 http://disabled
  • 5080 MHz 16 http://disabled
  • 5180 MHz 36 http://disabled
  • 5200 MHz 40 http://disabled
  • 5220 MHz 44 http://disabled
  • 5240 MHz 48 http://disabled
  • 5260 MHz 52 http://disabled
  • 5280 MHz 56 http://disabled
  • 5300 MHz 60 http://disabled
  • 5320 MHz 64 http://disabled
  • 5500 MHz 100 http://disabled
  • 5520 MHz 104 http://disabled
  • 5540 MHz 108 http://disabled
  • 5560 MHz 112 http://disabled
  • 5580 MHz 116 http://disabled
  • 5600 MHz 120 http://disabled
  • 5620 MHz 124 http://disabled
  • 5640 MHz 128 http://disabled
  • 5660 MHz 132 http://disabled
  • 5680 MHz 136 http://disabled
  • 5700 MHz 140 http://disabled
  • 5745 MHz 149 http://30.0%20dBm
  • 5765 MHz 153 http://30.0%20dBm
  • 5785 MHz 157 http://30.0%20dBm
  • 5805 MHz 161 http://30.0%20dBm
  • 5825 MHz 165 http://30.0%20dBm
  • 5170 MHz 34 http://disabled
  • 5190 MHz 38 http://disabled
  • 5210 MHz 42 http://disabled
  • 5230 MHz 46 http://disabled
    Bitrates (non-HT):
  • 6.0 Mbps
  • 9.0 Mbps
  • 12.0 Mbps
  • 18.0 Mbps
  • 24.0 Mbps
  • 36.0 Mbps
  • 48.0 Mbps
  • 54.0 Mbps
    max # scan SSIDs: 4
    max scan IEs length: 2257 bytes
    Coverage class: 0 (up to 0m)
    Supported Ciphers:
  • WEP40 (00-0f-ac:1)
  • WEP104 (00-0f-ac:5)
  • TKIP (00-0f-ac:2)
  • CCMP (00-0f-ac:4)
    Available Antennas: TX 0 RX 0
    Supported interface modes:
  • IBSS
  • managed
  • AP
  • AP/VLAN
  • monitor
  • P2P-client
  • P2P-GO
    software interface modes (can always be added):
  • AP/VLAN
  • monitor
    valid interface combinations:
  • #{ managed, AP, P2P-client, P2P-GO } <= 2,
    total <= 2, #channels <= 1
    Supported commands:
  • new_interface
  • set_interface
  • new_key
  • new_beacon
  • new_station
  • new_mpath
  • set_mesh_params
  • set_bss
  • authenticate
  • associate
  • deauthenticate
  • disassociate
  • join_ibss
  • join_mesh
  • remain_on_channel
  • set_tx_bitrate_mask
  • action
  • frame_wait_cancel
  • set_wiphy_netns
  • set_channel
  • set_wds_peer
  • Unknown command (84)
  • Unknown command (87)
  • Unknown command (85)
  • testmode
  • connect
  • disconnect
    Supported TX frame types:
  • IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0
    0xd0 0xe0 0xf0
  • managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0
    0xc0 0xd0 0xe0 0xf0
  • AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0
    0xd0 0xe0 0xf0
  • AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0
    0xc0 0xd0 0xe0 0xf0
  • mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0
    0xc0 0xd0 0xe0 0xf0
  • P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0
    0xc0 0xd0 0xe0 0xf0
  • P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0
    0xd0 0xe0 0xf0
    Supported RX frame types:
  • IBSS: 0xb0 0xc0 0xd0
  • managed: 0x40 0xd0
  • AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  • AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
  • mesh point: 0xb0 0xc0 0xd0
  • P2P-client: 0x40 0xd0
  • P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
    Device supports RSN-IBSS.
    HT Capability overrides:
  • MCS: ff ff ff ff ff ff ff ff ff ff
  • maximum A-MSDU length
  • supported channel width
  • short GI for 40 MHz
  • max A-MPDU length exponent
  • min MPDU start spacing
    Device supports TX status socket option.
    Device supports HT-IBSS.

lsmod
Module Size Used by
arc4 12529 2
carl9170 81942 0
mac80211 549354 1 carl9170
ath 23827 1 carl9170
cfg80211 211363 3 carl9170,mac80211,ath
rfcomm 42651 0
bnep 18140 2
bluetooth 204950 10 rfcomm,bnep
compat 14949 6 carl9170,mac80211,cfg80211,rfcomm,bnep,bluetooth
binfmt_misc 17500 1
coretemp 13400 0
ppdev 17073 0
ext2 72880 1
psmouse 95552 0
snd_hda_codec_via 46478 1
microcode 22803 0
snd_hda_intel 33491 3
snd_hda_codec 134212 2 snd_hda_codec_via,snd_hda_intel
snd_hwdep 13602 1 snd_hda_codec
lpc_ich 17061 0
snd_pcm 96580 2 snd_hda_intel,snd_hda_codec
snd_timer 29425 1 snd_pcm
snd 78734 12
snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 15047 1 snd
i915 520519 3
parport_pc 32688 1
snd_page_alloc 18484 2 snd_hda_intel,snd_pcm
serio_raw 13215 0
asus_atk0110 17646 0
drm_kms_helper 46784 1 i915
drm 275528 4 i915,drm_kms_helper
i2c_algo_bit 13413 1 i915
video 19335 1 i915
mac_hid 13205 0
lp 17759 0
parport 46345 3 ppdev,parport_pc,lp
floppy 69452 1
atl1e 33208 0

Best regards,

Ivan Selin

�
Reply to this email directly or view it on GitHubhttps://github.com//issues/27
.

@IvanSelin
Copy link
Author

Hello twpedersen,

With compat drivers 3.8 mesh interface was created successfully. Thanks for help
Bu the way, is there some kind of a table, where is listed all new functionality in drivers and driver version, where it appeared first? It could reduce number of people with a problem like mine.

Best regards,
Ivan

twpedersen pushed a commit that referenced this issue May 22, 2013
@JoePerches @torvalds
checkpatch: fix stringification macro defect
e942e2c 
Fix checkpatch misreporting defect with stringification macros

ERROR: Macros with complex values should be enclosed in parenthesis
  #27: FILE: arch/arm/include/asm/kgdb.h:41:
  +#define ___to_string(X) #X

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Vincent Stehlé <v-stehle@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
silverjam pushed a commit that referenced this issue Nov 19, 2013
@suryasaimadhu
x86: Improve the printout of the SMP bootup CPU table
646e29a 
As the new x86 CPU bootup printout format code maintainer, I am
taking immediate action to improve and clean (and thus indulge
my OCD) the reporting of the cores when coming up online.

Fix padding to a right-hand alignment, cleanup code and bind
reporting width to the max number of supported CPUs on the
system, like this:

 [    0.074509] smpboot: Booting Node   0, Processors:      #1  #2  #3  #4  #5  #6  #7 OK
 [    0.644008] smpboot: Booting Node   1, Processors:  #8  #9 #10 #11 #12 #13 #14 #15 OK
 [    1.245006] smpboot: Booting Node   2, Processors: #16 #17 #18 #19 #20 #21 #22 #23 OK
 [    1.864005] smpboot: Booting Node   3, Processors: #24 #25 #26 #27 #28 #29 #30 #31 OK
 [    2.489005] smpboot: Booting Node   4, Processors: #32 #33 #34 #35 #36 #37 #38 #39 OK
 [    3.093005] smpboot: Booting Node   5, Processors: #40 #41 #42 #43 #44 #45 #46 #47 OK
 [    3.698005] smpboot: Booting Node   6, Processors: #48 #49 #50 #51 #52 #53 #54 #55 OK
 [    4.304005] smpboot: Booting Node   7, Processors: #56 #57 #58 #59 #60 #61 #62 #63 OK
 [    4.961413] Brought up 64 CPUs

and this:

 [    0.072367] smpboot: Booting Node   0, Processors:    #1 #2 #3 #4 #5 #6 #7 OK
 [    0.686329] Brought up 8 CPUs

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Libin <huawei.libin@huawei.com>
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Link: http://lkml.kernel.org/r/20130927143554.GF4422@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
silverjam pushed a commit that referenced this issue Nov 19, 2013
@bp3tk0v
x86/boot: Further compress CPUs bootup message
a17bce4 
Turn it into (for example):

[    0.073380] x86: Booting SMP configuration:
[    0.074005] .... node   #0, CPUs:          #1   #2   #3   #4   #5   #6   #7
[    0.603005] .... node   #1, CPUs:     #8   #9  #10  #11  #12  #13  #14  #15
[    1.200005] .... node   #2, CPUs:    #16  #17  #18  #19  #20  #21  #22  #23
[    1.796005] .... node   #3, CPUs:    #24  #25  #26  #27  #28  #29  #30  #31
[    2.393005] .... node   #4, CPUs:    #32  #33  #34  #35  #36  #37  #38  #39
[    2.996005] .... node   #5, CPUs:    #40  #41  #42  #43  #44  #45  #46  #47
[    3.600005] .... node   #6, CPUs:    #48  #49  #50  #51  #52  #53  #54  #55
[    4.202005] .... node   #7, CPUs:    #56  #57  #58  #59  #60  #61  #62  #63
[    4.811005] .... node   #8, CPUs:    #64  #65  #66  #67  #68  #69  #70  #71
[    5.421006] .... node   #9, CPUs:    #72  #73  #74  #75  #76  #77  #78  #79
[    6.032005] .... node  #10, CPUs:    #80  #81  #82  #83  #84  #85  #86  #87
[    6.648006] .... node  #11, CPUs:    #88  #89  #90  #91  #92  #93  #94  #95
[    7.262005] .... node  #12, CPUs:    #96  #97  #98  #99 #100 #101 #102 #103
[    7.865005] .... node  #13, CPUs:   #104 #105 #106 #107 #108 #109 #110 #111
[    8.466005] .... node  #14, CPUs:   #112 #113 #114 #115 #116 #117 #118 #119
[    9.073006] .... node  #15, CPUs:   #120 #121 #122 #123 #124 #125 #126 #127
[    9.679901] x86: Booted up 16 nodes, 128 CPUs

and drop useless elements.

Change num_digits() to hpa's division-avoiding, cell-phone-typed
version which he went at great lengths and pains to submit on a
Saturday evening.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: huawei.libin@huawei.com
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
@creasyw
Copy link

creasyw commented Jun 11, 2021

Hi @twpedersen!! 👋

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
4 participants
@twpedersen @jcard0na @creasyw @IvanSelin