Uni Edition. Receiver
UAT Receiver makes reception and decoding of certain UAT signals, then transmits serial data frames over UART @ 2 Mbps.
This data rate and format of the frames were choosen to be compatible with Stratux UATRadio, Low Power v3.
The Stratux UATRadio, Low Power v3 data format can de decoded by:
- SoftRF Standalone Edition
- SoftRF Raspberry Edition
- Stratux itself.
For this particular use case, there are no options to choose from:
| Radio | UAT | Air V6 | OGNTP | P3I | FANET+ |
|---|---|---|---|---|---|
| Receive |
|
||||
| Transmit |
| Data | Stratux | NMEA | GDL90 | Dump1090 |
|---|---|---|---|---|
| Input | ||||
| Output |
|
Use of batteries is not required if you supply Ground and 3.3 Volts Power wires to SensorTag from an external source, such as:
- USB-Serial adapter
- SoftRF Standalone unit
- Raspberry Pi
