-
Notifications
You must be signed in to change notification settings - Fork 51
NI FGEN Calibration Functions
Palash Khare edited this page Jun 10, 2021
·
3 revisions
- niFgen_SelfCal
- niFgen_GetSelfCalSupported
- niFgen_GetSelfCalLastDateAndTime
- niFgen_GetExtCalLastDateAndTime
- niFgen_GetSelfCalLastTemp
- niFgen_GetExtCalLastTemp
- niFgen_GetExtCalRecommendedInterval
- niFgen_ChangeExtCalPassword
- niFgen_SetCalUserDefinedInfo
- niFgen_GetCalUserDefinedInfo
- niFgen_GetCalUserDefinedInfoMaxSize
- niFgen_ReadCurrentTemperature
- niFgen_RestoreLastExtCalConstants
ViStatus niFgen_SelfCal (ViSession vi);
Performs a full internal self-calibration on the device. If the calibration is successful, new calibration data and constants are stored in the onboard EEPROM.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitWithOptions functions and identifies a particular instrument session. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetSelfCalSupported (ViSession vi, ViBoolean* selfCalSupported);
Returns whether the device supports self–calibration.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitWithOptions function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| selfCalSupported | ViBoolean* |
Returns whether the device supports self-calibration. Defined Values |
| VI_TRUE | Self–calibration is supported. |
|---|---|
| VI_FALSE | Self–calibration is not supported. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetSelfCalLastDateAndTime (ViSession vi, ViInt32* year, ViInt32* month, ViInt32* day, ViInt32* hour, ViInt32* minute);
Returns the date and time of the last successful self-calibration.
All values are returned as separate parameters. Each parameter is returned as an integer, including the year, month, day, hour, minute, and second. For example, if the device is calibrated in September 2013, this function returns 9 for the month parameter and 2013 for the year parameter.
The time returned is 24-hour (military) local time. For example, if the device was calibrated at 2:30 PM, this function returns 14 for the hours parameter and 30 for the minutes parameter.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| year | ViInt32* | Specifies the year of the last successful calibration. |
| month | ViInt32* | Specifies the month of the last successful calibration. |
| day | ViInt32* | Specifies the day of the last successful calibration. |
| hour | ViInt32* | Specifies the hour of the last successful calibration. |
| minute | ViInt32* | Specifies the minute of the last successful calibration. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetExtCalLastDateAndTime (ViSession vi, ViInt32* year, ViInt32* month, ViInt32* day, ViInt32* hour, ViInt32* minute);
Returns the date and time of the last successful external calibration. The time returned is 24-hour (military) local time; for example, if the device was calibrated at 2:30 PM, this function returns 14 for the hour parameter and 30 for the minute parameter.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| year | ViInt32* | Specifies the year of the last successful calibration. |
| month | ViInt32* | Specifies the month of the last successful calibration. |
| day | ViInt32* | Specifies the day of the last successful calibration. |
| hour | ViInt32* | Specifies the hour of the last successful calibration. |
| minute | ViInt32* | Specifies the minute of the last successful calibration. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetSelfCalLastTemp (ViSession vi, ViReal64* temperature);
Returns the temperature at the last successful self-calibration. The temperature is returned in degrees Celsius.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| temperature | ViReal64* | Specifies the temperature at the last successful calibration in degrees Celsius. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetExtCalLastTemp (ViSession vi, ViReal64* temperature);
Returns the temperature at the last successful external calibration. The temperature is returned in degrees Celsius.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| temperature | ViReal64* | Specifies the temperature at the last successful calibration in degrees Celsius. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetExtCalRecommendedInterval (ViSession vi, ViInt32* months);
Returns the recommended interval between external calibrations in months.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| months | ViInt32* | Specifies the recommended interval between external calibrations in months. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_ChangeExtCalPassword (ViSession vi, ViConstString oldPassword, ViConstString newPassword);
Changes the password that is required to initialize an external calibration session. The password may be up to four characters long.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| oldPassword | ViConstString | Specifies the old (current) external calibration password. |
| newPassword | ViConstString | Specifies the new (desired) external calibration password. The password may be up to four characters long. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_SetCalUserDefinedInfo (ViSession vi, ViConstString info);
Stores user-defined information in the onboard EEPROM. Call the niFgen_GetCalUserDefinedInfoMaxSize function to determine the maximum number of characters that can be stored.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| info | ViConstString | Specifies the information string that should be stored in the EEPROM. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetCalUserDefinedInfo (ViSession vi, ViString info);
Retrieves user-defined information from the onboard EEPROM. Call the niFgen_GetCalUserDefinedInfoMaxSize function to determine the number of characters that can be retrieved. The buffer you provide should be the size of the maximum number of characters stored plus one termination character.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| info | ViString | Specifies a string into which the user information is copied. This parameter must point to a character buffer large enough to hold the information string. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_GetCalUserDefinedInfoMaxSize (ViSession vi, ViInt32* infoSize);
Returns the maximum number of characters, excluding the termination character, of user-defined information that can be stored in the onboard EEPROM.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| infoSize | ViInt32* | Specifies the maximum number of characters of user defined info that can be stored in the onboard EEPROM. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_ReadCurrentTemperature (ViSession vi, ViReal64* temperature);
Reads the current onboard temperature of the device. The temperature is returned in degrees Celsius.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_init or the niFgen_InitExtCal function and identifies a particular instrument session. |
| Output | ||
| Name | Type | Description |
| Temperature | ViReal64* | Returns the current temperature read from onboard temperature sensors, in degrees Celsius. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
ViStatus niFgen_RestoreLastExtCalConstants (ViSession vi);
Overwrites the current calibration constants with those from the last successful external calibration. This action effectively undoes any self-calibrations performed since the last time an external calibration was performed. This function should be used if a self-calibration produced invalid calibration constants.
| Input | ||
|---|---|---|
| Name | Type | Description |
| vi | ViSession | Identifies your instrument session. vi is obtained from the niFgen_InitExtCal function and identifies a particular instrument session. |
| Name | Type | Description |
|---|---|---|
| status | ViStatus | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. You can examine the status code from each call to an NI-FGEN function to determine if an error occurred. To obtain a text description of the status code, call the niFgen_error_message function. To obtain additional information about the error condition, call the niFgen_GetError function. To clear the error information from NI-FGEN, call the niFgen_ClearError function. The general meaning of the status code is as follows: |
| Value | Meaning |
|---|---|
| 0 | Success |
| Positive Values | Warnings |
| Negative Values | Errors |
Creating and Setting Up a gRPC Server
Session Utilities API Reference
gRPC API Differences From C API
Sharing Driver Sessions Between Clients
C API Docs
NI-DAQmx
- gRPC API Differences From C API
- Task Configuration And Control
- Channel Configuration And Creation
- Timing
- Triggering
- Read Functions
- Write Functions
- Export Hardware Signals
- Scale Configuration
- Internal Buffer Configuration
- Advanced Functions
- System Configuration
- Error Handling
- Buffer Attributes
- Calibration Info Attributes
- Channel Attributes
- Device Attributes
- Export Signal Attributes
- Persisted Channel Attributes
- Persisted Scale Attributes
- Persisted Task Attributes
- Physical Channel Attributes
- Read Attributes
- Scale Attributes
- System Attributes
- Task Attributes
- Timing Attributes
- Trigger Attributes
- Watchdog Attributes
- Write Attributes
NI-DCPOWER
- Setup Functions
- Configure Functions
- Measurement Functions
- Control Functions
- Trigger And Event
- Attribute Functions
- Query Functions
- Calibration Functions
- Utility Functions
- Supported Device
- Source Attributes
- Transient Attributes
- Voltage Attributes
- Current Attributes
- Pulse Voltage Attributes
- Pulse Current Attributes
- Cutoff Attributes
- Measurement Attributes
- Trigger Attributes Functions
- Event Attributes
- Advanced Attributes
- Inherent Ivi Attributes
- Supported Device Attributes
NI-DIGITAL PATTERN DRIVER
- Init And Close Functions
- Session Locking Functions
- Utility Functions
- Error Handling Functions
- Calibration Functions
- Attributes Functions
- Pin Map Functions
- Low Level Functions
- Low Level Action Functions
- Pin Control Functions
- Static IO Functions
- Clock Generator Functions
- Levels And Timing Functions
- TDR Functions
- PPMU Configuration Functions
- DC Voltage Functions
- DC Current Functions
- PPMU Action Functions
- Pattern Configuration Functions
- Pattern Action Functions
- History Ram Functions
- Source Memory Functions
- Capture Memory Functions
- Triggers And Events Functions
- Conditional Jump Trigger Functions
- Sequencer Flag Functions
- Sequencer Register Functions
- Match Fail Combination Functions
- Pattern Results Functions
- Sort Results Functions
- Frequency Measurement Functions
- IVI Inherent Attributes
- Specific Driver Information Attributes, Read Only
- Driver Setup Information Attributes
- Device Attributes
- Pin Control Attributes
- Level Configuration Attributes
- Trigger Configuration Attributes
- PPMU Attributes
- Patterns Attributes
- Pattern Opcode Event Attributes
- Timing Offset Attributes
- Keep Alive Attributes
- Frequency Measurement Attributes
- Clock Generator Attributes
- History RAM
- Synchronization Attributes
- TDR Endpoint Termination Attributes
NI-FGEN
- Setup Functions
- Configuration Functions
- Standard Output Functions
- Arbitrary Waveform Output Functions
- Arbitrary Sequence Output Functions
- Incremental Waveform Write Functions
- Configure Clock Functions
- Trigger And Syncronizations Functions
- 5404 Routing Functions
- Script Output Functions
- Configure Onboard Signal Processing Functions
- Configure Peer To Peer Functions
- Attribute Functions
- Waveform Control Functions
- Error Functions
- Output Attributes
- Arbitrary Waveform Attributes
- Data Transfer Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Attributes
- Standard Function Attributes
- Clock Attributes
- Event Attributes
- Triggering Attributes
- Instrument Specific Attributes
- Inherent IVI Attributes
- 5401 5411 5431
NI-RFmx Bluetooth
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Packet Attributes
- Auto Detect Signal Attributes
- Modacc Attributes
- ACP Attributes
- Twenty dB Attributes
- Frequency Range Attributes
- TXP Attributes
- Advanced Attributes
NI-RFmx NR
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attributes Functions
- Fetch Results Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Signal Detection Attributes
- Component Carrier Attributes
- List Attributes
- Modacc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- TXP Attributes
- Pvt Attributes
- Advanced Attributes
NI-RFmx LTE
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Ch Configuration Functions
- NB IoT Configuration Functions
- ModAcc Configuration Functions
- ACP Configuration Functions
- CHP Configuration Functions
- OBW Configuration Functions
- SEM Configuration Functions
- PVT Configuration Functions
- SlotPhase Configuration Functions
- SlotPower Configuration Functions
- Set And Get Attribute Functions
- ModAcc Fetch Functions
- ACP Fetch Functions
- CHP Fetch Functions
- OBW Fetch Functions
- SEM Fetch Functions
- PVT Fetch Functions
- SlotPhase Fetch Functions
- SlotPower Fetch Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- Component Carrier Attributes
- ModAcc Attributes
- ACP Attributes
- CHP Attributes
- OBW Attributes
- SEM Attributes
- PVT Attributes
- SlotPhase Attributes
- SlotPower Attributes
- Advanced Attributes
NI-RFmx SpecAn
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Read Functions
- Fetch Functions
- Utility Functions
- Marker Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- ACP Attributes
- Cdf Attributes
- CHP Attributes
- Fcnt Attributes
- Harm Attributes
- OBW Attributes
- SEM Attributes
- Spectrum Attributes
- Spur Attributes
- TXP Attributes
- AMPM Attributes
- Dpd Attributes
- IQ Attributes
- IM Attributes
- NF Attributes
- Phasenoise Attributes
- PAVT Attributes
- Advanced Attributes
NI-RFmx WLAN
- gRPC API Differences From C API
- General Functions
- Configuration Functions
- Set And Get Attribute Functions
- Fetch DSSS ModAcc Functions
- Fetch OFDM ModAcc Functions
- Fetch SEM Functions
- Fetch TXP Functions
- Fetch PowerRamp Functions
- Utility Functions
- Build String Functions
- Advanced Functions
- General Attributes
- Trigger Attributes
- OFDM Attributes
- Auto Detect Signal Attributes
- DSSS ModAcc Attributes
- OFDM ModAcc Attributes
- SEM Attributes
- TXP Attributes
- PowerRamp Attributes
- Advanced Attributes
NI-RFSA
- General Functions
- Configuration Functions
- Acquisition Functions
- Utility Functions
- Calibration Functions
- General Attributes
- Vertical Attributes
- Signal Path Attributes
- Acquisition Attributes
- Acquisition Attributes
- Triggers Attributes
- Events Attributes
- Device Characteristics Attributes
- Peer To Peer Streaming Attributes
- Configuration List Attributes
- Inherent IVI Properties Attributes
- De-embedding Attributes
- Self Calibration Attributes
- Factory Calibration Attributes
- External Alignment Attributes
- Device Specific Attributes
NI-RFSG
- General Functions
- Generation Configuration
- Utility Functions
- Calibration Functions
- Arb Attributes
- Clock Attributes
- Configuration List Attributes
- De-embedding Attributes
- Device Characteristics Attributes
- Device Specific Attributes
- Events Attributes
- External Calibration Attributes
- Inherent IVI Attributes Attributes
- IQ Impairment Attributes
- Load Configurations Attributes
- Modulation Attributes
- Obsolete Attributes
- Peer To Peer Attributes
- RF Attributes
- Self Calibration Attributes
- Triggers Attributes
NI-SCOPE
- Setup Functions
- Configure Functions
- Attribute Functions
- Acquisition Functions
- Measurement Functions
- Calibrate Functions
- Utility Funcitons
- Error Handling Functions
- IVI Compliance Or Obsolete Functions
- Vertical Attributes
- Horizontal Attributes
- Trigger Attributes
- Clocking Attributes
- Synchronization Attributes
- Acquisition Attributes
- Waveform Measurements Attributes
- Onboard Signal Processing Attributes
- Peer To Peer Streaming Attributes
- Device Attributes
- IVI Or Obsolete Attributes
- Instrument Capabilities Attributes
- If Digitizer Attributes
NI-XNET
- gRPC API differences from C APIs
- General Functions
- Cluster Properties
- Database Properties
- Device Properties
- ECU Properties
- Frame Properties
- Interface Properties
- LIN Schedule Entry Properties
- LIN Schedule Properties
- PDU Properties
- Session Ethernet Properties
- Session Frame Properties
- Session Interface Properties
- Session Properties
- Session SAE J1939 Properties
- Signal Properties
- Subframe Properties
- System Properties
- IP-Stack Functions
- Socket Options
- Socket Functions