Noob 101

Jump to bottom Edit New page

Bee91303 edited this page Mar 26, 2018 · 10 revisions

Reading List

What this page is for:

This is an attempt to create a guided list to take new users through the steps to get up and running based on the most common combination of setups. I read things out of order and missed some information. I got help in the forum, a resource I highly suggest using. I regret taking people's time for information I should have been able to locate on my own. So I came up with the reading list.

Work in progress ...

What needs to be added to the workflow below - how to prepare the SVG files ( MakerCam ) https://github.com/MaslowCNC/GroundControl/wiki/MakerCAM ( checked that tabs are included now )

check the SVG repository for linkage version of the Final Sled
Software users guide https://github.com/MaslowCNC/GroundControl/wiki/Ground-Control-Users-Guide
add how & where to mount electronics

Reading list -

Standard kit , Standard router

https://github.com/MaslowCNC/Mechanics/wiki/Safety-First

http://www.maslowcnc.com/faq/

http://www.maslowcnc.com/assemblyguide/

Standard kit , Standard router, Z axis Kit

https://github.com/MaslowCNC/Mechanics/wiki/Safety-First

http://www.maslowcnc.com/faq/

Read this before the assembly guide, it is suggested to add the Z Axis to the temporary sled

https://github.com/MaslowCNC/Mechanics/wiki/How-To-Assemble-The-Z-Axis

https://github.com/MaslowCNC/Mechanics/wiki/Z-Axis

http://www.maslowcnc.com/assemblyguide/

Standard kit , Standard router, Z axis Kit, Triangulation Linkage Kit

https://github.com/MaslowCNC/Mechanics/wiki/Safety-First

http://www.maslowcnc.com/faq/

Read this before the assembly guide, it is suggested to add the Z Axis to the temporary sled

https://github.com/MaslowCNC/Mechanics/wiki/How-To-Assemble-The-Z-Axis

https://github.com/MaslowCNC/Mechanics/wiki/Z-Axis

http://www.maslowcnc.com/assemblyguide/

note: As of 3/15/2018 kits default to including a Ring Kit, information -

https://forums.maslowcnc.com/t/triangulation-linkage-kits-explained/2736

https://github.com/MaslowCNC/Mechanics/wiki/Assembly-Instructions-for-Triangulation-Linkage-Kit

===

Minimal resources needed to cut the Final Design parts:

Maslow kit

Router

Router Bit

Computer

2 sheets of 3/4 Plywood (US) aka 23/32

non US : 18mm ply

1 2x4 10’

non US : 35mm x 90mm 3048mm

cut to -

2 x 39-3/8" & 2x18”

2 x - non US :1000.125, 457.2 millimeters