Skip to content

UP Squared 7100

AAEONAEU-SW edited this page Aug 26, 2024 · 3 revisions

Introduction

This page is for UP Squared 7100 based products

Compatibility List:

  • UP Squared 7100 Board

Hardware Specifications

  • Intel® Processor N97 / Intel® Processor N100 (formerly Alder Lake N)
  • Intel® UHD Graphics Gen 12
  • Up to 16GB LPDDR5
  • Up to 128GB eMMC
  • 40Pin Header

Full Specifications are available on up-board.org website.

Pinout

This board includes a standard 40pin header as most of our UP series platforms.

More information can be found here: 40Pin Header

Extra Features

To check a summary of the I/O features for this board this is a I/O Matrix Overview

Hardware Setup

To get started with the UP Squared 7100, you will need the following:

  • Monitor
  • HDMI cable (or another video cable with a HDMI adapter)
  • USB keyboard and mouse (use a USB hub should you need to connect more than 2 USB devices)
  • PSU: 12V6A PSU (power cord sold separately)

Also, if you need to install/reinstall the operating system, please prepare the following:

  • USB flash drive at least 8GB

Software Setup Guides

Operating System

The following setup procedures are for the UP Squared 7100 based products, which do not come with operating system preinstalled.

You may also follow these procedures when you need to reinstall the operating system.

Install Intel Edge Software Hub package

Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:

Back to Spec-Matrix-Overview-Atom Page

Clone this wiki locally