Skip to content

UP Squared Pro 7000

AAEONAEU-SW edited this page Feb 7, 2024 · 12 revisions

Introduction

This page is for UP Squared Pro 7000 based products

Compatibility List:

  • UP Squared Pro 7000 Edge
  • UP Squared Pro 7000 Board

Hardware Specifications

  • Intel® Core™ i3-N305 / Intel Atom® x7425E / Intel® Processor N97 / Intel® Processor N50 (formerly Alder Lake N)
  • Intel® UHD Graphics Gen 12
  • Up to 16GB LPDDR5
  • Up to 64GB eMMC
  • 40Pin Header
  • MIPI-CSI via 61Pin FPC connector

Full Specifications are available on up-board.org website.

Pinout

This board includes a standard 40pin header as most of our UP series platforms.

More information can be found here: 40Pin Header

Extra Features

To check a summary of the I/O features for this board this is a I/O Matrix Overview

MIPI CSI-2

In order to facilitate the evaluation and use of the MIPI CSI-2 interface available onboard we provide a Camera Kit, which is available from our shop and a Tutorial (from our Downloads section) to help with the hardware and software setup.

Hardware Setup

To get started with the UP Squared Pro 7000, you will need the following:

Also, if you need to install/reinstall the operating system, please prepare the following:

  • USB flash drive at least 8GB

Software Setup Guides

Operating System

The following setup procedures are for the UP Squared Pro 7000 based products, which do not come with operating system preinstalled.

You may also follow these procedures when you need to reinstall the operating system.

Install Intel Edge Software Hub package

Software packages from the Intel Edge Software Hub are compatible and validated with our platform. Here are direct links to install the following software packages:

Back to Spec-Matrix-Overview-Atom Page

Clone this wiki locally