19 Oct 08:08

6d5227b

Tasmota v10.0.0 Norman

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v9.1.0 Imogen the internal GPIO function representation has changed in such a way that fallback is only possible to the latest GPIO configuration before installing v9.1.0.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Initial installation

Easy initial installation of Tasmota can be performed using the Tasmota WebInstaller.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-10.0.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.7.4.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32c3.bin = The Tasmota version with most drivers including additional sensors and KNX for ESP32-C3 and 4M+ flash.
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-lvgl.bin = The LVGL version adds Light and Versatile Graphics Library (LVGL) display support for 4M+ flash.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware for 8M+ flash.
tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware for 8M+ flash.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota32/release-10.0.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v10.0.0 Norman

Added

Release of Tasmota WebInstaller
Command SetOption2 1 to enable display of global temperature/humidity/pressure info to JSON sensor message
Command SetOption127 1 to force Wi-Fi in no-sleep mode even if Sleep 0 is not enabled
Command SetOption128 0|1 web referer check disabling HTTP API commands if set to 0. Default set to 1 for backward compatibility #12828
Command SetOption129 1 to enable split total energy results #13030
Command SetOption130 1 adding heap size (and ESP32 fragmentation) to logging timestamp for debugging
Command SetSensor1..127 0|1 to globally disable individual sensor driver
Command Subscribe2 ... to subscribe to a MQTT topic without appended "/#" #12858
Command WebGetConfig <url> if #define USE_WEBGETCONFIG is enabled to restore/init configuration from external webserver #13034
Command WebQuery <url> GET|POST|PUT|PATCH [<headers>] <body> to extent HTTP requests #13209
Commands EnergyTotal<phase>, EnergyToday<phase> and EnergyYesterday<phase> to (re)set energy values
Commands EnergyUsage and EnergyExport to (re)set energy usage and export values
Optional IP filter to command TCPStart #12806
Neopool commands NPPHRes, NPCLRes and NPIonRes #12813
Support for second DNS server
Support for influxdb using #define USE_INFLUXDB and several Ifx commands
Support for AM2320 Temperature and Humidity Sensor by Lars Wessels #12485
Support for Technoline WS2300-15 Anemometer #12573
Support for Telaire T6700 Series CO2 sensor by Alexander Savchenko #12618
Support for CAN bus and Freedom Won Battery Management System by Marius Bezuidenhout #12651
Support for IEM3155 Wattmeter #12940
Support for Hydreon RG-15 Solid State Rain sensor #12974
Support for IKEA VINDRIKTNING particle concentration sensor #12976
Support for Sensirion SCD40/SCD41 CO2 sensor #13139
Support for BL0939 energy monitor as used in ESP32 based Sonoff Dual R3 V2 Pow #13195
Support for BL0942 energy monitor #13259
Support for HM330X SeedStudio Grove Particule sensor #13250
Initial support for Tasmota Mesh (TasMesh) providing node/broker communication using ESP-NOW #11939
Initial support for Wi-Fi extender #12784
Rule event support as JSON payload #12496
MQTT minimum password length restriction in GUI #12553
ESP32 Berry partition manager #12465
ESP32 Berry class webclient for HTTP/HTTPS requests
ESP32 Berry support for I2S audio mp3 playback
ESP32 Berry support for vararg
ESP32 Berry support for Curve 25519 EC crypto
ESP32 Berry support for ESP32/ESP32S2 DAC gpio
ESP32 Berry support for Serial
ESP32 Berry print stack trace when exception, more detailed with line numbers if #define USE_BERRY_DEBUG
ESP32 support for (Yeelight) Mi Desk Pro using bi...

Assets 105

17 Jun 08:38

github-actions

v9.5.0

cbc74ab

Tasmota v9.5.0 Michael

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs, AWS IoT and Azure IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers for 1M+ flash. RECOMMENDED RELEASE BINARY
tasmota-AF.bin to tasmota-VN.bin = The Tasmota version in different languages for 1M+ flash.
tasmota-lite.bin = The Lite version without most drivers and sensors for 1M+ flash.
tasmota-knx.bin = The Knx version without some features but adds KNX support for 1M+ flash.
tasmota-sensors.bin = The Sensors version adds more useful sensors for 1M+ flash.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 1M+ flash.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support for 1M+ flash.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version for 2M+ flash.
tasmota-zigbee.bin = The dedicated cc25xx Zigbee Bridge version for 4M+ flash.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter for 1M+ flash. This version should NOT be used for initial installation.

Above binaries are also available as gzipped version allowing faster uploads.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota/release-9.5.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.6.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash. RECOMMENDED RELEASE BINARY
tasmota32_8M.bin = The Tasmota version with most drivers including additional sensors and KNX for 8M+ flash.
tasmota32_16M.bin = The Tasmota version with most drivers including additional sensors and KNX for 16M+ flash.
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
tasmota32-AF.bin to tasmota32-VN.bin = The Tasmota version in different languages for 4M+ flash.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features for 4M+ flash.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support for 4M+ flash.
tasmota32-webcam.bin = The Webcam version adds webcam support for 4M+ flash.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support for 4M+ flash.
tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware for 8M+ flash.
tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware for 8M+ flash.

Latest released binaries can be downloaded from

Historical binaries can be downloaded from

http://ota.tasmota.com/tasmota32/release-9.5.0

The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

Additional information

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.5.0 Michael (Rossi)

Added

Command Status0 providing all status information on a single line
Command TuyaSend5 for hex string #12211
Command MqttWifiTimeout 100..20000 to control MQTT Wi-Fi connection timeout default set to 200 mS #12222
Commands Color2 and Dimmer4 to allow retaining brightness ratio between white and color channels when setting dimmer for linked lights #12072
Extend command Wifi with Wi-Fi Mode Control #12292
Defines USER_RULE1, USER_RULE2 and USER_RULE3 to store rules at compile time
Define USER_BACKLOG to store commands at compile time to be executed at firmware load or when executing command reset
Support for optional Template JSON fieldpair "CMND":"<any template related command>|<any template related command>|..." #11788
ESP32 pulldown buttons Button_d and Button_id and switches Switch_d #10814
Support for MQTT using Azure IoT Hub by Kevin Saye #11906
Make Telegram command TmState persistent #11965
Zigbee binary supporting cc25xx hardware on ESP8266 4M flash hardware #11872
Zigbee firmware for Tube's Zigbee coordinator based on EFR32 and ESP32
Zigbee firmware 6.7.9 for Sonoff ZBBridge
LVGL support for 3 buttons as rotary encoder #12035
LVGL support for touchscreen #12039
LVGL support for PSRAM #12062
LVGL support for TrueType fonts via FreeType library #12087
LVGL support for PNG images #12148
Allow Home Assistant discovery of MCP2300xx output as relay #12037
Preliminary support for Esp32C3 - RiscV based
Support for voltage and current monitoring when using Shelly dimmer 2 hardware #11988
Support for Azure Device Provisioning Service for IoT Hub #12056
Show new IP after the Wi-Fi Initial Config #12091
Update Sugar Valley Neopool driver #12171
Acer projector support #12190
I2S and Interrupt GPIO types #12192
Update OpenTherm driver #12195
Support for BM8563 RTC chip (I2C) found in M5Stack Core2 and M5StickC #12199

Changed

IRremoteESP8266 library from v2.7.16 to v2.7.18
NeoPixelBus library from v2.6.1.4 to v2.6.3 stage
Shelly Dimmer 1 and 2 stm32 firmware from v51.5 to v51.6
Allow longer MQTT response messages by removing fixed memory buffer with size 1040 to heap allocated buffer
Command Timers layout of JSON message changed to single line
Command Gpio layout of JSON message changed to single line
Command Modules layout of JSON message changed to single line
ESP32 increase log buffer from 4k to 6k to support longer messages
Move Settings from DRAM to heap
Refactor platformio configurations by Jason2866
WifiManager save Wi-Fi configuration from settings, do it only once #12242
Improving SI7021 reading reliability by adjusting timers #12256
Re...

Assets 105

23 Apr 10:10

arendst

v9.4.0

61adb53

Tasmota v9.4.0 Leslie

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

Above binaries are also available as gzipped version allowing faster uploads.

The binaries can be downloaded from either https://github.com/arendst/Tasmota/tree/release-firmware or http://ota.tasmota.com/tasmota/release. The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.6.

tasmota32.bin = The Tasmota version with most drivers including additional sensors and KNX. RECOMMENDED RELEASE BINARY
tasmota32solo1.bin = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32.
tasmota32-BG.bin to tasmota32-TW.bin = The Tasmota version in different languages.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota32-webcam.bin = The Webcam version adds webcam support.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support.
tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware.
tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware.

The binaries can be downloaded from either https://github.com/arendst/Tasmota/tree/release-firmware or http://ota.tasmota.com/tasmota32/release. The latter links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.4.0 Leslie

Added

Command Sensor80 1 <0..7> to control MFRC522 RFID antenna gain from 18dB (0) to 48dB (7) #11073
Command SerialBuffer 256..520 to change hardware serial receive buffer size from default (256) to max local buffer size (520) #11448
Command SetOption126 1 to enable DS18x20 arithmetic mean over teleperiod for JSON temperature based on #11472
Command Backlog0 to allow execution of following commands without delay
Command TuyaTempSetRes 0..3 to control Tuya Temperature Set Resolution #11781
Command Wifi 0/1 for ESP8266 to turn wifi Off and On. When wifi is Off it is always returned On after a restart except for a wake-up from deepsleep #11839
Commands MqttKeepAlive 1..100 to set Mqtt Keep Alive timer (default 30) and MqttTimeout 1..100 to set Mqtt Socket Timeout (default 4) #5341
Commands DisplayType to select sub-modules where implemented and DisplayInvert to select inverted display where implemented
Support for SML VBUS #11125
Support for NEC and OPTOMA LCD/DLP Projector serial power control by Jan BubÃƒÂk #11145
Support for XPT2046 touch screen digitizer on ILI9341 display by nonix #11159
Support for zigbee lumi.sensor_wleak #11200
Support for dummy energy monitor using user values set by commands VoltageSet, CurrentSet, PowerSet and FrequencySet. Enable by selecting any GPIO as Option A2 #10640
Support for CSE7761 energy monitor as used in ESP32 based Sonoff Dual R3 Pow #10793
Support for Frequency monitoring and zero-cross detection on CSE7761 (Sonoff Dual R3)
Support for TM1638 seven segment display by Ajith Vasudevan #11031
Support for MAX7219 seven segment display by Ajith Vasudevan #11387
Support for MPU6886 on primary or secondary I2C bus
Support for multiple CCS811 sensors with baseline control (USE_CCS811_V2) by clanganke #10858
Allow MCP230xx pinmode from output to input #11104
Berry improvements #11163
Extent compile time SetOptions support #11204
Tasmota discovery as alternative to Home Assistant discovery using define USE_TASMOTA_DISCOVERY
Optional GUI file editor enabled with define GUI_EDIT_FILE by barbudor #11668
Initial support for universal display driver UDisplay by Gerhard Mutz. Enable by selecting any GPIO as Option A3 #11665
ESP32 Extent BLE #11212
ESP32 support for WS2812 hardware driver via RMT or I2S
ESP32 support for secondary I2C controller
ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
ESP32 support for LVGL 7.11 with Berry binding by Stephan Hadinger #11789

Breaking Changed

ESP32 partition layout changed to accomodate more file space on most and more code space on core2 and odroid-go #11746

Changed

TasmotaSerial library from v3.2.0 to v3.3.0
PubSubClient library from EspEasy v2.7.12 to Tasmota v2.8.12
IRremoteESP8266 library from v2.7.15 to v2.7.16
ESP32 core library from v1.0.5-rc6 to v1.0.6
TuyaMcu dimmer timeout #11121
Rename epaper 42 commands #11222
DeepSleep announcement topic #11223
Limit number of relay/button columns in GUI to 8 #11546
ADC range result from int to float using command FreqRes for decimal resolution selection #11545
Removed overtemp detection on external energy monitoring devices #11628
Redesigned initial GUI wifi configuration by Adrian Scillato [#11693](http...

Assets 2

23 Feb 15:13

arendst

v9.3.1

3f7071c

Tasmota v9.3.1 Kenneth

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

Above binaries are also available as gzipped version allowing faster uploads.

The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release. The links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.5-rc6.

tasmota32.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota32-BG.bin to tasmota32-TW.bin = The Tasmota version in different languages.
tasmota32-lite.bin = The Lite version without most drivers and sensors.
tasmota32-knx.bin = The Knx version without some features but adds KNX support.
tasmota32-sensors.bin = The Sensors version adds more useful sensors.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota32-webcam.bin = The Webcam version adds webcam support.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support.
tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware.
tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware.

The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota32/release. The links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota32/release/tasmota32.bin

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.3.1 Kenneth

Added

Animate PWM dimmer brightness LEDs during transitions and with variable brightness #11076
Commands StateRetain and InfoRetain #11084

Changed

Remove the need to start filenames with a slash (/) in Ufs commands
Removed command VirtualCT as synonym for SetOption106 #11049

Fixed

Web request accepts wrong password #11039
Ili1942 driver #11046
ESP32 Mi32 driver #11048
Shutter driver #11055
TM1637 driver now needs TM1637 CLK and TM1637 DIO to enable #11057
Sml driver #11082
Ezo drivers #11083

Changelog v9.3.0 Kenneth

Added

Command CTRange to specify the visible CT range the bulb is capable of #10311
Command L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100> to control Sonoff L1 Music Sync mode sensitivity and speed #10722
Command RuleTimer0 to access all RuleTimers at once #10352
Command Speed2 to control a once off fade #10741
Command VirtualCT to simulate or fine tune CT bulbs with 3,4,5 channels #10311
Command SetOption40 0..250 to disable button functionality if activated for over 0.1 second re-introduced
Command SetOption43 1..255 to control Rotary step #10407
Command SetOption118 1 to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default #10353
Command SetOption119 1 to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic #10355
Zigbee command SetOption120 1 or ZbEndpointTopic 1 to add the zigbee endpoint as suffix in topic when using SetOption89 1
Zigbee command ZbScan to do an energy scan on each radio channel
Commands ChannelRemap, MultiPWM, AlexaCTRange, PowerOnFade, PWMCT, WhiteBlend and VirtualCT as synonyms for SetOption37, 68, 82, 91, 92, 105 and 106
Commands ZbNameKey, ZbDeviceTopic, ZbNoPrefix, ZbEndpointSuffix, ZbNoAutoBind and ZbNameTopic as synonyms for SetOption83, 89, 100, 101, 110 and 112
Commands ZbNoAutoBind, ZbReceivedTopic and ZbOmitDevice as synonyms for SetOption116, 118 and 119
Commands BuzzerActive and BuzzerPwm as synonyms for SetOption67 and 111
Filesystem commands Ufs, UfsType, UfsSize, UfsFree, UfsDelete, UfsRename and UfsRun
Support for filesystem autoexec.bat to execute sequential commands like backlog
Milliseconds to console output #10152
Gpio Option_a1 enabling PWM2 high impedance if powered off as used by Wyze bulbs #10196
Rotary No Pullup GPIO selection Rotary A/B_n #10407
BSSID and Signal Strength Indicator to GUI wifi scan result #10253
Support for P9813 RGB Led MOSFET controller #10104
Support for GPIO option selection
Support for FTC532 8-button touch controller by Peter Franck #10222
Support for BS814A-2 8-button touch buttons by Peter Franck #10447
Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck #10481
Support for TOF10120 time of flight sensor by Cyril Pawelko #10190
Support for Afrikaans language translations by Christiaan Heerze
Support for Frysk language translations by Christiaan Heerze
Support for IR inverted leds using #define IR_SEND_INVERTED true #10301
Support for disabling 38kHz IR modulation using #define IR_SEND_USE_MODULATION false [#10301](#103...

Assets 106

19 Feb 11:25

arendst

v9.3.0

96d4e60

Tasmota v9.3.0 Kenneth

RELEASE NOTES

Migration Information

This version removes support for direct migration from versions before v8.1.0 (Doris)

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

ESP8266 or ESP8285 based

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

Above binaries are also available as gzipped version allowing faster uploads.

ESP32 based

The following binary downloads have been compiled with ESP32/Arduino library core version 1.0.5-rc6.

tasmota32.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota32-BG.bin to tasmota32-TW.bin = The Tasmota version in different languages.
tasmota32-lite.bin = The Lite version without most drivers and sensors.
tasmota32-knx.bin = The Knx version without some features but adds KNX support.
tasmota32-sensors.bin = The Sensors version adds more useful sensors.
tasmota32-ir.bin = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota32-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota32-webcam.bin = The Webcam version adds webcam support.
tasmota32-bluetooth.bin = The Bluetooth version adds BLE support.
tasmota32-odroidgo.bin = The Odroid-Go version is specifically tailored to Odroid_go hardware.
tasmota32-core2.bin = The Core2 version is specifically tailored to M5Stack Core2 hardware.

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.3.0 Kenneth

Added

Command CTRange to specify the visible CT range the bulb is capable of #10311
Command L1MusicSync <0|Off>|<1|On>|<2|Toggle>, 1..10, 1..100> to control Sonoff L1 Music Sync mode sensitivity and speed #10722
Command RuleTimer0 to access all RuleTimers at once #10352
Command Speed2 to control a once off fade #10741
Command VirtualCT to simulate or fine tune CT bulbs with 3,4,5 channels #10311
Command SetOption40 0..250 to disable button functionality if activated for over 0.1 second re-introduced
Command SetOption43 1..255 to control Rotary step #10407
Command SetOption118 1 to move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default #10353
Command SetOption119 1 to remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic #10355
Zigbee command SetOption120 1 or ZbEndpointTopic 1 to add the zigbee endpoint as suffix in topic when using SetOption89 1
Zigbee command ZbScan to do an energy scan on each radio channel
Commands ChannelRemap, MultiPWM, AlexaCTRange, PowerOnFade, PWMCT, WhiteBlend and VirtualCT as synonyms for SetOption37, 68, 82, 91, 92, 105 and 106
Commands ZbNameKey, ZbDeviceTopic, ZbNoPrefix, ZbEndpointSuffix, ZbNoAutoBind and ZbNameTopic as synonyms for SetOption83, 89, 100, 101, 110 and 112
Commands ZbNoAutoBind, ZbReceivedTopic and ZbOmitDevice as synonyms for SetOption116, 118 and 119
Commands BuzzerActive and BuzzerPwm as synonyms for SetOption67 and 111
Filesystem commands Ufs, UfsType, UfsSize, UfsFree, UfsDelete, UfsRename and UfsRun
Support for filesystem autoexec.bat to execute sequential commands like backlog
Milliseconds to console output #10152
Gpio Option_a1 enabling PWM2 high impedance if powered off as used by Wyze bulbs #10196
Rotary No Pullup GPIO selection Rotary A/B_n #10407
BSSID and Signal Strength Indicator to GUI wifi scan result #10253
Support for P9813 RGB Led MOSFET controller #10104
Support for GPIO option selection
Support for FTC532 8-button touch controller by Peter Franck #10222
Support for BS814A-2 8-button touch buttons by Peter Franck #10447
Support for up to 4 I2C SEESAW_SOIL Capacitance & Temperature sensors by Peter Franck #10481
Support for TOF10120 time of flight sensor by Cyril Pawelko #10190
Support for Afrikaans language translations by Christiaan Heerze
Support for Frysk language translations by Christiaan Heerze
Support for IR inverted leds using #define IR_SEND_INVERTED true #10301
Support for disabling 38kHz IR modulation using #define IR_SEND_USE_MODULATION false #10301
Support for SPI display driver for ST7789 TFT by Gerhard Mutz #9037
Support for TM1637 seven segment display by Ajith Vasudevan #10889
Support for time proportioned (#define USE_TIMEPROP) and optional PID (#define USE_PID) relay control #10412
Support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther #3647
Support for SM2135 current selection using GPIO SM2135 DAT index #10634
Support for Sugar Valley NeoPool Controller by Norbert Richter #10637
Support for Device Groups Device Map #10898
Support for Eastron SDM72D-M three phase 100A Modbus energy meter #10862
Support for ESP32 Module 3 Odroid Go 16MB binary tasmota32-odroidgo.bin [#8...

Assets 106

21 Dec 16:06

arendst

v9.2.0

0489d3f

Tasmota v9.2.0 Julie

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1 (http://ota.tasmota.com/tasmota/release-6.7.1/)
Migrate to Tasmota 7.2.0 (http://ota.tasmota.com/tasmota/release-7.2.0/)

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.5.1 (http://ota.tasmota.com/tasmota/release-8.5.1/)

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1 (http://ota.tasmota.com/tasmota/release-9.1.0/)

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.9 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.9.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

The attached binaries can also be downloaded from http://ota.tasmota.com/tasmota/release for ESP8266 or http://ota.tasmota.com/tasmota32/release for ESP32. The links can be used for OTA upgrades too like OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.2.0 Julie

Added

Command SetOption115 1 to enable ESP32 MiBle
Command SetOption116 1 to disable auto-query of zigbee light devices (avoids network storms with large groups)
Command SetOption117 1 for light fading to be fixed duration instead of fixed slew rate #10109
Command RfProtocol to control RcSwitch receive protocols by BBBits #10063
Commands TuyaRGB, TuyaEnum and TuyaEnumList #9769
Zigbee command ZbInfo and prepare support for EEPROM
Zigbee command ZbLeave to unpair a device
Zigbee support for Mi Door and Contact #9759
Zigbee alarm persistence #9785
Zigbee persistence of device/sensor data in EEPROM (only ZBBridge)
Zigbee better support for Tuya Protocol #10074
Zigbee visual map of network
TyuaMcu update 2/3 by Federico Leoni #10004
Support for additional EZO sensors by Christopher Tremblay
Support for AS608 optical and R503 capacitive fingerprint sensor
Support for Shelly Dimmer 1 and 2 by James Turton #9854
Support for common anode sevenseg displays by adding #define USE_DISPLAY_SEVENSEG_COMMON_ANODE by Ken Sanislo #9963
Support for multiple WeMo devices by Magic73 #9208
Support for SPI connected MFRC522 13.56MHz rfid card reader #9916
Support ESP32 SPIFFS for internal use
KNX read reply for Power (#9236, #9891)
Fallback NTP server from x.pool.ntp.org if no ntpservers are configured
Optional CCloader support for CC25xx Zigbee or CC26xx BLE by Christian Baars #9970
Letsencrypt R3 in addition to X3 CA #10086

Breaking Changed

KNX DPT9 (16-bit float) to DPT14 (32-bit float) by Adrian Scillato #9811 #9888

Changed

Core library from v2.7.4.5 to v2.7.4.9
IRremoteESP8266 library from v2.7.12 to v2.7.13
Shelly Dimmer 1 and 2 stm32 firmware from v51.4 to v51.5
mDNS has been disabled from all pre-compiled binaries to allow new features
Sonoff L1 color up scaling and color margin detection #9545
MQTT Wifi connection timeout from 5000 to 200 mSec #9886
Force bigger Thunk Stack if 4K RSA even without EC ciphers #10075

Fixed

Command gpio using non-indexed functions regression from v9.1.0 #9962
NTP fallback server functionality #9739
Telegram group chatid not supported #9831
KNX buttons, switches and sensors detection regression from v9.1.0 #9811
KNX ESP32 UDP mulicastpackage #9811
GUI MqttUser and MqttPassword updates when TLS is compiled in #9825
ESP32 TasmotaClient firmware upgrade #9218
Reset to defaults after 6 hours of DeepSleep #9993
Backlog timing wraparound #9995
First LED in addressable string does not fade when using scheme #10088
Improved Opentherm error handling #10055
Shutter motordelay stop issue #10033
Shutter fix overflow on runtime over 100 seconds #9800
ESP32 CC2530 heap corruption #10121
ESP32 Analog input div10 rule trigger #10149

Fixed Backported

Shutter stop issue #10170
Scripter script_sub_command #10181
Scripter JSON variable above 32 chars #10193
Shelly Dimmer power on state #10182
Wemo emulation for single devices #10194
ESP32 LoadStoreError when using #define USER_TEMPLATE #9506
Compile error when #ifdef USE_IR_RECEIVE is disabled regression from 9.1.0.2

Removed

Version compatibility check
PN532 define USE_PN532_CAUSE_EVENTS replaced by generic rule trigger on pn532#uid=

Assets 98

07 Nov 13:55

arendst

v9.1.0

e035bdb

Tasmota v9.1.0 Imogen

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.7.1
Migrate to Tasmota 7.2.0

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.1
Migrate to Tasmota 8.5.1

--- Major change in internal GPIO function representation ---

Migrate to Tasmota 9.1

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.5 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.5.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

List of embedded modules.

Complete list of available feature and sensors.

Changelog v9.1.0 Imogen

Added

Command DimmerStep 1..50 to change default dimmer up and down step of 10% by James Turton (#9733)
Command Gpios 255 to show all possible GPIO configurations
Command NoDelay for immediate backlog command execution by Erik Montnemery (#9544)
Command ShutterChange to increment change position (#9594)
Command SwitchMode 15 sending only MQTT message on switch change (#9593)
Command SetOption113 1 to set dimmer low on rotary dial after power off
Command SetOption114 1 to detach Switches from Relays and enable MQTT action state for all the SwitchModes
Command SwitchText to change JSON switch names by barbudor (#9691)
Zigbee command ZbData for better support of device specific data
Zigbee command ZbOccupancy to configure the time-out for PIR
Optional support for Mitsubishi Electric HVAC by David Gwynne (#9237)
Optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
SDM630 three phase ImportActive Energy display when #define SDM630_IMPORT is enabled by Janusz Kostorz (#9124)
Optional support for inverted NeoPixelBus data line by enabling #define USE_WS2812_INVERTED (#8988)
Support for PWM dimmer color/trigger on tap, SO88 led, DGR WITH_LOCAL flag, multi-press and ledmask by Paul Diem (#9474, #9584)
Support for stateful ACs using StateMode in tasmota-ir.bin by Arik Yavilevich (#9472)
Support for analog buttons indexed within standard button range
Support for Vietnamese language translations by TÃ¢m.NT
Support for timers in case of no-sunset permanent day by cybermaus (#9543)
Support for EZO sensors by Christopher Tremblay
Support for fixed output Hi or Lo GPIO selection
Support for Hass discovery of TuyaMcu and Sonoff Ifan by Federico Leoni (#9727)
TLS in binary tasmota-zbbridge (#9620)
Zigbee reduce battery drain (#9642)
ESP32 support for Wireless-Tag WT32-ETH01 (#9496)
ESP32 MI32 Beacon support, RSSI at TELEPERIOD, refactoring by Christian Baars (#9609)
HM10 Beacon support and refactoring by Christian Baars (#9702)
Initial support for iBeacons (Sensor52) on ESP32 using internal BLE by rvbglas (#9732)

Breaking Changed

Redesigned ESP8266 GPIO internal representation in line with ESP32 changing Template layout too
TLS fingerprint #define MQTT_FINGERPRINT from string to hexnumbers (#9570)
Command Status output for disabled status types now returns {"Command":"Error"}
MAX31865 driver to support up to 6 thermocouples selected by MX31865 CS instead of SSPI CS (#9103)
When SetOption73 1 JSON result from {"ACTION":"SINGLE"} to {"Button1":{"Action":"SINGLE"}}

Changed

Command Gpio17 replaces command Adc
Command Gpios replaces command Adcs
New IR Raw compact format (#9444)
A4988 optional microstep pin selection
Pulsetime to allow use for all relays with 8 interleaved so Pulsetime1 is valid for Relay1, Relay9, Relay17 etc. (#9279)
Management of serial baudrate (#9554)
Rotary driver adjusted accordingly if Mi Desk Lamp module is selected (#9399)
Tasmota Arduino Core v2.7.4.5 allowing webpassword over 47 characters (#9687)
Webserver code optimizations (#9580, #9590)
PlatformIO library structure redesigned for compilation speed by Jason2866
Zigbee flash storage refactor adding commands ZbProbe, ZbStatus2 and ZbRestore (#9641)
Default otaurl in my_user_config.h to http://ota.tasmota.com/tasmota/release/tasmota.bin.gz
IRremoteESP8266 library from v2.7.10 to v2.7.11
NeoPixelBus library from v2.5.0.09 to v2.6.0

Fixed

Light wakeup Exception 0 (divide by zero) when WakeupDuration is not initialised (#9466)
Exception 28 due to device group buffer overflow (#9459)
Arilux RF remote detection regression from v8.3.0
Ledlink blink when no network connected regression from v8.3.1.4 (#9292)
TuyaMcu energy display regression from v8.5.0.1 (#9547)
Thermostat sensor status corruption regression from v8.5.0.1 (#9449)
Telegram message decoding error regression from v8.5.0.1
Rule handling of Var or Mem using text regression from v8.5.0.1 (#9540)
Rule handling of JSON null regression from v8.5.0.1 (#9685)
Rule Break not working as expected when ONCE is enabled (#9245)
Rule expressions using mems corrupts character pool (#9301)
Shutter timing problem due to buffer overflow in calibration matrix (#9458)
Correct Energy period display shortly after midnight by gominoa (#9536)
Tuyamcu dimmers MQTT topic (#9606)
Scripter memory alignment (#9608)
Zigbee battery percentage (#9607)
HassAnyKey anomaly (#9601)

Removed

Support for direct upgrade from Tasmota versions before v7.0
Support for downgrade to versions before 9.0 keeping current GPIO configuration
Auto config update for all Friendlynames and Switchtopic from Tasmota versions before v8.0
Auto output selection of decimal or hexadecimal data based on user input. Now only based on SetOption17

Assets 98

02 Oct 10:04

arendst

v8.5.1

e076b50

Tasmota v8.5.1 Hannah

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.x
Migrate to Tasmota 7.x

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.1
Migrate to Tasmota 8.x

While fallback or downgrading is common practice it was never supported due to Settings additions or changes in newer releases. Starting with release v8.1.0 Doris the Settings are re-allocated in such a way that fallback is only allowed and possible to release v7.2.0 Constance. Once at v7.2.0 you're on your own when downgrading even further.

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.1 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.1.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

List of embedded modules.

Complete list of available feature and sensors.

Changelog

Version 8.5.1 Hannah

Fix energy total counters (#9263, #9266)
Fix crash in ZbRestore
Fix reset BMP sensors when executing command SaveData and define USE_DEEPSLEEP enabled (#9300)
Fix status 0 message when using define USE_MQTT_TLS due to small log buffer (#9305)
Fix status 13 exception 9 when more than one shutter is configured
Fix status 13 json message
Fix Shelly 2.5 higher temperature regression from 8.2.0.1 (#7991)
Change replace ArduinoJson with JSMN for JSON parsing
Change WakeUp uses 256 steps instead of 100 (#9241)
Add command SetOption110 1 to disable Zigbee auto-config when pairing new devices
Add command SetOption111 1 to enable frequency output for buzzer GPIO (#8994)
Add command SetOption112 1 to enable friendly name in zigbee topic (use with SetOption89)
Add #define USE_MQTT_AWS_IOT_LIGHT for password based AWS IoT authentication
Add #define MQTT_LWT_OFFLINE and #define MQTT_LWT_ONLINE to user_config.h (#9395)
Add new shutter modes (#9244)
Add Zigbee auto-config when pairing
Add support for MLX90640 IR array temperature sensor by Christian Baars
Add support for VL53L1X time of flight sensor by Johann Obermeier

Assets 95

14 Sep 09:07

arendst

v8.5.0

ed50401

Tasmota v8.5.0 Hannah

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.x
Migrate to Tasmota 7.x

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.1
Migrate to Tasmota 8.x

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.4.1 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.4.1.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

List of embedded modules.

Complete list of available feature and sensors.

Changelog

Version 8.5.0 Hannah

Remove support for direct upgrade from versions before 6.6.0.11 to versions after 8.4.0.1
Change references from http://thehackbox.org/tasmota/ to http://ota.tasmota.com/tasmota/
Change triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS)
Change White blend mode to using command SetOption 105 instead of RGBWWTable
Fix ESP32 PWM range
Fix display power control (#9114)
Fix energy total counters (#9263, #9266)
Add command SetOption102 0/1 to set Baud rate for Teleinfo communication (0 = 1200 or 1 = 9600)
Add command SetOption103 0/1 to set TLS mode when TLS is selected
Add command SetOption104 1 to disable all MQTT retained messages
Add command SetOption106 1 to create a virtual White ColorTemp for RGBW lights
Add command SetOption107 0/1 to select virtual White as (0) Warm or (1) Cold
Add command SetOption108 0/1 to enable Teleinfo telemetry into Tasmota Energy MQTT (0) or Teleinfo only (1)
Add command SetOption109 1 to force gen1 Alexa mode, for Echo Dot 2nd gen devices only
Add command Restart 2 to halt system. Needs hardware reset or power cycle to restart (#9046)
Add command PowerDelta1 to PowerDelta3 to trigger on up to three phases (#9134)
Add Zigbee options to ZbSend Config and ReadCondig
Add Zigbee better support for IKEA Motion Sensor
Add Zigbee web gui widget for Battery and Temp/Humidity/Pressure sensors
Add Zigbee web ui for power metering plugs
Add better configuration corruption recovery (#9046)
Add virtual CT for 4 channels lights, emulating a 5th channel
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
Add ESP32 Analog input support for GPIO32 to GPIO39
Add experimental support for ESP32 TTGO Watch and I2S Audio by Gerhard Mutz

Assets 95

29 Jul 14:27

arendst

v8.4.0

b59a8a7

Tasmota v8.4.0 George

RELEASE NOTES

Migration Information

See migration path for instructions how to migrate to a major version. Pay attention to the following version breaks due to dynamic settings updates:

Migrate to Sonoff-Tasmota 3.9.x
Migrate to Sonoff-Tasmota 4.x
Migrate to Sonoff-Tasmota 5.14
Migrate to Sonoff-Tasmota 6.x
Migrate to Tasmota 7.x

--- Major change in parameter storage layout ---

Migrate to Tasmota 8.1
Migrate to Tasmota 8.x

Supported Core versions

This release will be supported from ESP8266/Arduino library Core version 2.7.2.1 due to reported security and stability issues on previous Core version. This will also support gzipped binaries.

Support of Core versions before 2.7.1 has been removed.

Support of TLS

To save resources when TLS is enabled mDNS needs to be disabled. In addition to TLS using fingerprints now also user supplied CA certs and AWS IoT is supported. Read full documentation

Initial configuration tools

For initial configuration this release supports Webserver based WifiManager or Serial based command interface only. Support for WPS and SmartConfig has been removed.

Provided Binary Downloads

The following binary downloads have been compiled with ESP8266/Arduino library core version 2.7.2.1.

tasmota.bin = The Tasmota version with most drivers. RECOMMENDED RELEASE BINARY
tasmota-BG.bin to tasmota-TW.bin = The Tasmota version in different languages.
tasmota-lite.bin = The Lite version without most drivers and sensors.
tasmota-knx.bin = The Knx version without some features but adds KNX support.
tasmota-sensors.bin = The Sensors version adds more useful sensors.
tasmota-ir = The InfraRed Receiver and transmitter version allowing all available protocols provided by library IRremoteESP8266 but without most other features.
tasmota-display.bin = The Display version without Energy Monitoring but adds display support.
tasmota-zbbridge.bin = The dedicated Sonoff Zigbee Bridge version.
tasmota-minimal.bin = The Minimal version allows intermediate OTA uploads to support larger versions and does NOT change any persistent parameter. This version should NOT be used for initial installation.

List of embedded modules.

Complete list of available feature and sensors.

Changelog

Version 8.4.0 George

Remove Arduino ESP8266 Core support for versions before 2.7.1
Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
Change IRRemoteESP8266 library from v2.7.6 to v2.7.8.10, fixing Samsung and Pioneer protocols (#8938)
Change Adafruit_SGP30 library from v1.0.3 to v1.2.0 (#8519)
Change Energy JSON Total field from "Total":[33.736,11.717,16.978] to "Total":33.736,"TotalTariff":[11.717,16.978]
Change Energy JSON ExportActive field from "ExportActive":[33.736,11.717,16.978] to "ExportActive":33.736,"ExportTariff":[11.717,16.978]
Change ESP32 USER GPIO template representation decreasing template message size
Change define USE_TASMOTA_SLAVE into USE_TASMOTA_CLIENT
Change commands SlaveSend and SlaveReset into ClientSend and ClientReset
Change all timer references from Arm to Enable in GUI, Timer command and JSON message
Change Domoticz commands prefix from Domoticz to Dz
Change Zigbee randomizing of parameters at first run or after Reset
Fix escape of non-JSON received serial data (#8329)
Fix exception or watchdog on rule re-entry (#8757)
Add command Rule0 to change global rule parameters
Add command Time 4 to display timestamp using milliseconds (#8537)
Add command SetOption94 0/1 to select MAX31855 or MAX6675 thermocouple support (#8616)
Add command SetOption97 0/1 to switch between Tuya serial speeds 9600 bps (0) or 115200 bps (1)
Add command SetOption98 0/1 to provide rotary rule triggers (1) instead of controlling light (0)
Add command SetOption99 0/1 to enable zero cross detection on PWM dimmer
Add command SetOption100 0/1 to remove Zigbee ZbReceived value from {"ZbReceived":{xxx:yyy}} JSON message
Add command SetOption101 0/1 to add the Zigbee source endpoint as suffix to attributes, ex Power3 instead of Power if sent from endpoint 3
Add command DzSend<type> <index>,<value1(;value2)|state> to send values or state to Domoticz
Add command Module2 to configure fallback module on fast reboot (#8464)
Add command (S)SerialSend6 <comma seperated values> (#8937)
Add commands LedPwmOn 0..255, LedPwmOff 0..255 and LedPwmMode1 0/1 to control led brightness by George (#8491)
Add ESP32 ethernet commands EthType 0/1, EthAddress 0..31 and EthClockMode 0..3
Add more functionality to command Switchmode 11 and 12 (#8450)
Add rule trigger System#Init to allow early rule execution without wifi and mqtt initialized yet
Add support for unique MQTTClient (and inherited fallback topic) by full Mac address using mqttclient DVES_%12X (#8300)
Add wildcard pattern ? for JSON matching in rules
Add Three Phase Export Active Energy to SDM630 driver
Add Zigbee options to ZbSend to write and report attributes
Add Zigbee auto-responder for common attributes
Add CpuFrequency to status 2
Add FlashFrequency to status 4
Add compile time interlock parameters (#8759)
Add compile time user template (#8766)
Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432)
Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432)
Add support for up to two BH1750 sensors controlled by commands BH1750Resolution and BH1750MTime (#8139)
Add support for up to eight MCP9808 temperature sensors by device111 (#8594)
Add support for BL0940 energy monitor as used in Blitzwolf BW-SHP10 (#8175)
Add support for Telegram bot (#8619)
Add support for HP303B Temperature and Pressure sensor by Robert Jaakke (#8638)
Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers, need a adaptater. See dedicated full blog about French teleinformation stuff
Add support for ESP32 ethernet adding commands Wifi 0/1 and Ethernet 0/1 both default ON
Add support for single wire LMT01 temperature Sensor by justifiably (#8713)
Add support for rotary encoder as light dimmer and optional color temperature if button1 still pressed (#8670)
Add support for switches/relays using an AC detection circuitry e.g. MOES MS-104B or BlitzWolf SS5 (#8606)
Add support for Schneider Electric iEM3000 series Modbus energy meter by Marius Bezuidenhout
Add support for Sonoff Zigbee Bridge as module 75 (#8583)

Assets 118

Releases: arendst/Tasmota

Tasmota v10.0.0 Norman

RELEASE NOTES

Migration Information

Supported Core versions

Support of TLS

Initial configuration tools

Initial installation

Provided Binary Downloads

ESP8266 or ESP8285 based

ESP32 based

Additional information

Changelog v10.0.0 Norman

Added

Tasmota v9.5.0 Michael

RELEASE NOTES

Migration Information

Supported Core versions

Support of TLS

Initial configuration tools

Provided Binary Downloads

ESP8266 or ESP8285 based

ESP32 based

Additional information

Changelog v9.5.0 Michael (Rossi)

Added

Changed

Tasmota v9.4.0 Leslie

RELEASE NOTES

Migration Information

Supported Core versions

Support of TLS

Initial configuration tools

Provided Binary Downloads

ESP8266 or ESP8285 based

ESP32 based

Changelog v9.4.0 Leslie

Added

Breaking Changed

Changed

Tasmota v9.3.1 Kenneth

RELEASE NOTES

Migration Information

Supported Core versions

Support of TLS

Initial configuration tools

Provided Binary Downloads

ESP8266 or ESP8285 based

ESP32 based

Changelog v9.3.1 Kenneth

Added

Changed

Fixed

Changelog v9.3.0 Kenneth

Added

Tasmota v9.3.0 Kenneth

RELEASE NOTES

Migration Information

Supported Core versions

Support of TLS

Initial configuration tools

Provided Binary Downloads

ESP8266 or ESP8285 based

ESP32 based

Changelog v9.3.0 Kenneth

Added

Tasmota v9.2.0 Julie

RELEASE NOTES

Migration Information

Supported Core versions

Support of TLS

Initial configuration tools

Provided Binary Downloads

Changelog v9.2.0 Julie

Added

Breaking Changed

Changed

Fixed

Fixed Backported

Removed