Why is the sound driver a loadable module? #37

keylevel · 2012-06-14T07:58:42Z

Given that the onboard sound system can't be changed, wouldn't it make sense for the sound driver to be built-in module? It seems as if this would make sound easier to use for less experienced users.

One thing I have noticed if it is configured as built-in, it currently loads after the ALSA system and therefore isn't ready soon enough at boot time.

huceke · 2012-06-14T08:04:05Z

It makes sense. Not all aplications use alsa to output sound. For example XBMC uses OpenMAX.

keylevel · 2012-06-14T12:10:37Z

Ah, good point.

However, I still think loading of the driver should take place before the ALSA layer if they are configured as built-in.

asb · 2012-06-14T13:01:20Z

keylevel, could you explain what problems you're having? On the latest wheezy test image http://www.raspberrypi.org/phpBB3/viewtopic.php?f=50&t=8071 snd-bcm2835 is loaded by default, and seems to work as expected.

keylevel · 2012-06-15T21:35:26Z

I'm building my own disto using Yocto. It seems to work ok when I build the kernel with the driver as a builtin, even though it's not ready when the ALSA layer loads.

Running one program that continuously hotplugs and replugs a cpu concurrently with another program that continuously writes to the scaling_setspeed node eventually deadlocks with: ============================================= [ INFO: possible recursive locking detected ] 3.4.0 #37 Tainted: G W --------------------------------------------- filemonkey/122 is trying to acquire lock: (s_active#13){++++.+}, at: [<c01a3d28>] sysfs_remove_dir+0x9c/0xb4 but task is already holding lock: (s_active#13){++++.+}, at: [<c01a22f0>] sysfs_write_file+0xe8/0x140 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(s_active#13); lock(s_active#13); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by filemonkey/122: #0: (&buffer->mutex){+.+.+.}, at: [<c01a2230>] sysfs_write_file+0x28/0x140 #1: (s_active#13){++++.+}, at: [<c01a22f0>] sysfs_write_file+0xe8/0x140 stack backtrace: [<c0014fcc>] (unwind_backtrace+0x0/0x120) from [<c00ca600>] (validate_chain+0x6f8/0x1054) [<c00ca600>] (validate_chain+0x6f8/0x1054) from [<c00cb778>] (__lock_acquire+0x81c/0x8d8) [<c00cb778>] (__lock_acquire+0x81c/0x8d8) from [<c00cb9c0>] (lock_acquire+0x18c/0x1e8) [<c00cb9c0>] (lock_acquire+0x18c/0x1e8) from [<c01a3ba8>] (sysfs_addrm_finish+0xd0/0x180) [<c01a3ba8>] (sysfs_addrm_finish+0xd0/0x180) from [<c01a3d28>] (sysfs_remove_dir+0x9c/0xb4) [<c01a3d28>] (sysfs_remove_dir+0x9c/0xb4) from [<c02d0e5c>] (kobject_del+0x10/0x38) [<c02d0e5c>] (kobject_del+0x10/0x38) from [<c02d0f74>] (kobject_release+0xf0/0x194) [<c02d0f74>] (kobject_release+0xf0/0x194) from [<c0565a98>] (cpufreq_cpu_put+0xc/0x24) [<c0565a98>] (cpufreq_cpu_put+0xc/0x24) from [<c05683f0>] (store+0x6c/0x74) [<c05683f0>] (store+0x6c/0x74) from [<c01a2314>] (sysfs_write_file+0x10c/0x140) [<c01a2314>] (sysfs_write_file+0x10c/0x140) from [<c014af44>] (vfs_write+0xb0/0x128) [<c014af44>] (vfs_write+0xb0/0x128) from [<c014b06c>] (sys_write+0x3c/0x68) [<c014b06c>] (sys_write+0x3c/0x68) from [<c000e0e0>] (ret_fast_syscall+0x0/0x3c) This is because store() in cpufreq.c indirectly calls kobject_get() via cpufreq_cpu_get() and is the last one to call kobject_put() via cpufreq_cpu_put(). Sysfs code should not call kobject_get() or kobject_put() directly (see the comment around sysfs_schedule_callback() for more information). Fix this deadlock by introducing two new functions: struct cpufreq_policy *cpufreq_cpu_get_sysfs(unsigned int cpu) void cpufreq_cpu_put_sysfs(struct cpufreq_policy *data) which do the same thing as cpufreq_cpu_{get,put}() but don't call kobject functions. To easily trigger this deadlock you can insert an msleep() with a reasonably large value right after the fail label at the bottom of the store() function in cpufreq.c and then write scaling_setspeed in one task and offline the cpu in another. The first task will hang and be detected by the hung task detector. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

…ET pending data [ Upstream commit 8822b64 ] We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Dave Jones <davej@redhat.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] <IRQ> [<ffffffff8172ff85>] dump_stack+0x55/0x76 [ 638.937878] [<ffffffff81730030>] spin_dump+0x8a/0x8f [ 638.939861] [<ffffffff81730056>] spin_bug+0x21/0x26 [ 638.941836] [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80 [ 638.945747] [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0 [ 638.953388] [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140 [ 638.955248] [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90 [ 638.957116] [<ffffffff8104fddd>] __do_softirq+0xfd/0x330 [ 638.958987] [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.960861] [<ffffffff8174a5cc>] call_softirq+0x1c/0x30 [ 638.962724] [<ffffffff81004c7d>] do_softirq+0x8d/0xc0 [ 638.964565] [<ffffffff8105024e>] irq_exit+0x10e/0x150 [ 638.966390] [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80 [ 638.970079] <EOI> [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.971899] [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80 [ 638.978988] [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [<ffffffff811b5a1d>] bio_endio+0x1d/0x40 [ 638.982463] [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [<ffffffff81306b9f>] blk_update_request+0x7f/0x350 [ 638.985967] [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90 [ 638.987710] [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30 [ 638.991149] [<ffffffff81308746>] blk_peek_request+0x106/0x250 [ 638.992861] [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [<ffffffff813040a7>] __blk_run_queue+0x37/0x50 [ 638.997900] [<ffffffff813045af>] blk_run_queue+0x2f/0x50 [ 638.999553] [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40 [ 639.002798] [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200 [ 639.004391] [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0 [ 639.005996] [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [<ffffffff81072f6b>] kthread+0xdb/0xe0 [ 639.009205] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0 [ 639.012437] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac30 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Cc: <stable@vger.kernel.org> (3.5+) Signed-off-by: Bian Yu <bianyu@kedacom.com> Reviewed-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de>

commit 905b029 upstream. When operate harddisk and hit errors, md_set_badblocks is called after scsi_restart_operations which already disabled the irq. but md_set_badblocks will call write_sequnlock_irq and enable irq. so softirq can preempt the current thread and that may cause a deadlock. I think this situation should use write_sequnlock_irqsave/irqrestore instead. I met the situation and the call trace is below: [ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010 [ 638.921923] lock: 0xffff8800d4d51fc8, .magic: dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0 [ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37 [ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013 [ 638.927816] ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007 [ 638.929829] ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8 [ 638.931848] ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8 [ 638.933884] Call Trace: [ 638.935867] <IRQ> [<ffffffff8172ff85>] dump_stack+0x55/0x76 [ 638.937878] [<ffffffff81730030>] spin_dump+0x8a/0x8f [ 638.939861] [<ffffffff81730056>] spin_bug+0x21/0x26 [ 638.941836] [<ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0 [ 638.943801] [<ffffffff8173f036>] _raw_spin_lock+0x66/0x80 [ 638.945747] [<ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0 [ 638.947672] [<ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50 [ 638.949595] [<ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0 [ 638.951504] [<ffffffff8149ec47>] scsi_finish_command+0x37/0xe0 [ 638.953388] [<ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140 [ 638.955248] [<ffffffff8130e32b>] blk_done_softirq+0x7b/0x90 [ 638.957116] [<ffffffff8104fddd>] __do_softirq+0xfd/0x330 [ 638.958987] [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.960861] [<ffffffff8174a5cc>] call_softirq+0x1c/0x30 [ 638.962724] [<ffffffff81004c7d>] do_softirq+0x8d/0xc0 [ 638.964565] [<ffffffff8105024e>] irq_exit+0x10e/0x150 [ 638.966390] [<ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60 [ 638.968223] [<ffffffff817499af>] apic_timer_interrupt+0x6f/0x80 [ 638.970079] <EOI> [<ffffffff810b964f>] ? __lock_release+0x6f/0x100 [ 638.971899] [<ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50 [ 638.973691] [<ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50 [ 638.975475] [<ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0 [ 638.977243] [<ffffffff81566e07>] rdev_set_badblocks+0x27/0x80 [ 638.978988] [<ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456] [ 638.980723] [<ffffffff811b5a1d>] bio_endio+0x1d/0x40 [ 638.982463] [<ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0 [ 638.984214] [<ffffffff81306b9f>] blk_update_request+0x7f/0x350 [ 638.985967] [<ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90 [ 638.987710] [<ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50 [ 638.989439] [<ffffffff8130862f>] __blk_end_request_all+0x1f/0x30 [ 638.991149] [<ffffffff81308746>] blk_peek_request+0x106/0x250 [ 638.992861] [<ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130 [ 638.994561] [<ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0 [ 638.996251] [<ffffffff813040a7>] __blk_run_queue+0x37/0x50 [ 638.997900] [<ffffffff813045af>] blk_run_queue+0x2f/0x50 [ 638.999553] [<ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0 [ 639.001185] [<ffffffff814a7721>] scsi_run_host_queues+0x21/0x40 [ 639.002798] [<ffffffff814a2e87>] scsi_restart_operations+0x177/0x200 [ 639.004391] [<ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0 [ 639.005996] [<ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0 [ 639.007600] [<ffffffff81072f6b>] kthread+0xdb/0xe0 [ 639.009205] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 [ 639.010821] [<ffffffff81748cac>] ret_from_fork+0x7c/0xb0 [ 639.012437] [<ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170 This bug was introduce in commit 2e8ac30 (the first time rdev_set_badblock was call from interrupt context), so this patch is appropriate for 3.5 and subsequent kernels. Signed-off-by: Bian Yu <bianyu@kedacom.com> Reviewed-by: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since crossbar is s/w configurable, the initial settings of the crossbar cannot be assumed to be sane. This implies that: a) On initialization all un-reserved crossbars must be initialized to a known 'safe' value. b) When unmapping the interrupt, the safe value must be written to ensure that the crossbar mapping matches with interrupt controller usage. So provide a safe value in the dt data to map if '0' is not safe for the platform and use it during init and unmap While at this, fix the below checkpatch warning. Fixes checkpatch warning: WARNING: Unnecessary space before function pointer arguments #37: FILE: drivers/irqchip/irq-crossbar.c:37: + void (*write) (int, int); Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Link: https://lkml.kernel.org/r/1403766634-18543-5-git-send-email-r.sricharan@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>

commit ecf5fc6 upstream. Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 raspberrypi#1 schedule at ffffffff815ab76e raspberrypi#2 schedule_timeout at ffffffff815ae5e5 raspberrypi#3 io_schedule_timeout at ffffffff815aad6a raspberrypi#4 bit_wait_io at ffffffff815abfc6 raspberrypi#5 __wait_on_bit at ffffffff815abda5 raspberrypi#6 wait_on_page_bit at ffffffff8111fd4f raspberrypi#7 shrink_page_list at ffffffff81135445 raspberrypi#8 shrink_inactive_list at ffffffff81135845 raspberrypi#9 shrink_lruvec at ffffffff81135ead raspberrypi#10 shrink_zone at ffffffff811360c3 raspberrypi#11 shrink_zones at ffffffff81136eff raspberrypi#12 do_try_to_free_pages at ffffffff8113712f raspberrypi#13 try_to_free_mem_cgroup_pages at ffffffff811372be raspberrypi#14 try_charge at ffffffff81189423 raspberrypi#15 mem_cgroup_try_charge at ffffffff8118c6f5 raspberrypi#16 __add_to_page_cache_locked at ffffffff8112137d raspberrypi#17 add_to_page_cache_lru at ffffffff81121618 raspberrypi#18 pagecache_get_page at ffffffff8112170b raspberrypi#19 grow_dev_page at ffffffff811c8297 raspberrypi#20 __getblk_slow at ffffffff811c91d6 raspberrypi#21 __getblk_gfp at ffffffff811c92c1 raspberrypi#22 ext4_ext_grow_indepth at ffffffff8124565c raspberrypi#23 ext4_ext_create_new_leaf at ffffffff81246ca8 raspberrypi#24 ext4_ext_insert_extent at ffffffff81246f09 raspberrypi#25 ext4_ext_map_blocks at ffffffff8124a848 raspberrypi#26 ext4_map_blocks at ffffffff8121a5b7 raspberrypi#27 mpage_map_one_extent at ffffffff8121b1fa raspberrypi#28 mpage_map_and_submit_extent at ffffffff8121f07b raspberrypi#29 ext4_writepages at ffffffff8121f6d5 raspberrypi#30 do_writepages at ffffffff8112c490 raspberrypi#31 __filemap_fdatawrite_range at ffffffff81120199 raspberrypi#32 filemap_flush at ffffffff8112041c raspberrypi#33 ext4_alloc_da_blocks at ffffffff81219da1 raspberrypi#34 ext4_rename at ffffffff81229b91 raspberrypi#35 ext4_rename2 at ffffffff81229e32 raspberrypi#36 vfs_rename at ffffffff811a08a5 raspberrypi#37 SYSC_renameat2 at ffffffff811a3ffc raspberrypi#38 sys_renameat2 at ffffffff811a408e raspberrypi#39 sys_rename at ffffffff8119e51e raspberrypi#40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Nikolay has reported a hang when a memcg reclaim got stuck with the following backtrace: PID: 18308 TASK: ffff883d7c9b0a30 CPU: 1 COMMAND: "rsync" #0 __schedule at ffffffff815ab152 #1 schedule at ffffffff815ab76e #2 schedule_timeout at ffffffff815ae5e5 #3 io_schedule_timeout at ffffffff815aad6a #4 bit_wait_io at ffffffff815abfc6 #5 __wait_on_bit at ffffffff815abda5 #6 wait_on_page_bit at ffffffff8111fd4f #7 shrink_page_list at ffffffff81135445 #8 shrink_inactive_list at ffffffff81135845 #9 shrink_lruvec at ffffffff81135ead #10 shrink_zone at ffffffff811360c3 #11 shrink_zones at ffffffff81136eff #12 do_try_to_free_pages at ffffffff8113712f #13 try_to_free_mem_cgroup_pages at ffffffff811372be #14 try_charge at ffffffff81189423 #15 mem_cgroup_try_charge at ffffffff8118c6f5 #16 __add_to_page_cache_locked at ffffffff8112137d #17 add_to_page_cache_lru at ffffffff81121618 #18 pagecache_get_page at ffffffff8112170b #19 grow_dev_page at ffffffff811c8297 #20 __getblk_slow at ffffffff811c91d6 #21 __getblk_gfp at ffffffff811c92c1 #22 ext4_ext_grow_indepth at ffffffff8124565c #23 ext4_ext_create_new_leaf at ffffffff81246ca8 #24 ext4_ext_insert_extent at ffffffff81246f09 #25 ext4_ext_map_blocks at ffffffff8124a848 #26 ext4_map_blocks at ffffffff8121a5b7 #27 mpage_map_one_extent at ffffffff8121b1fa #28 mpage_map_and_submit_extent at ffffffff8121f07b #29 ext4_writepages at ffffffff8121f6d5 #30 do_writepages at ffffffff8112c490 #31 __filemap_fdatawrite_range at ffffffff81120199 #32 filemap_flush at ffffffff8112041c #33 ext4_alloc_da_blocks at ffffffff81219da1 #34 ext4_rename at ffffffff81229b91 #35 ext4_rename2 at ffffffff81229e32 #36 vfs_rename at ffffffff811a08a5 #37 SYSC_renameat2 at ffffffff811a3ffc #38 sys_renameat2 at ffffffff811a408e #39 sys_rename at ffffffff8119e51e #40 system_call_fastpath at ffffffff815afa89 Dave Chinner has properly pointed out that this is a deadlock in the reclaim code because ext4 doesn't submit pages which are marked by PG_writeback right away. The heuristic was introduced by commit e62e384 ("memcg: prevent OOM with too many dirty pages") and it was applied only when may_enter_fs was specified. The code has been changed by c3b94f4 ("memcg: further prevent OOM with too many dirty pages") which has removed the __GFP_FS restriction with a reasoning that we do not get into the fs code. But this is not sufficient apparently because the fs doesn't necessarily submit pages marked PG_writeback for IO right away. ext4_bio_write_page calls io_submit_add_bh but that doesn't necessarily submit the bio. Instead it tries to map more pages into the bio and mpage_map_one_extent might trigger memcg charge which might end up waiting on a page which is marked PG_writeback but hasn't been submitted yet so we would end up waiting for something that never finishes. Fix this issue by replacing __GFP_IO by may_enter_fs check (for case 2) before we go to wait on the writeback. The page fault path, which is the only path that triggers memcg oom killer since 3.12, shouldn't require GFP_NOFS and so we shouldn't reintroduce the premature OOM killer issue which was originally addressed by the heuristic. As per David Chinner the xfs is doing similar thing since 2.6.15 already so ext4 is not the only affected filesystem. Moreover he notes: : For example: IO completion might require unwritten extent conversion : which executes filesystem transactions and GFP_NOFS allocations. The : writeback flag on the pages can not be cleared until unwritten : extent conversion completes. Hence memory reclaim cannot wait on : page writeback to complete in GFP_NOFS context because it is not : safe to do so, memcg reclaim or otherwise. Cc: stable@vger.kernel.org # 3.9+ [tytso@mit.edu: corrected the control flow] Fixes: c3b94f4 ("memcg: further prevent OOM with too many dirty pages") Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fixes the following lockdep splat: [ 1.244527] ============================================= [ 1.245193] [ INFO: possible recursive locking detected ] [ 1.245193] 4.2.0-rc1+ #37 Not tainted [ 1.245193] --------------------------------------------- [ 1.245193] cp/742 is trying to acquire lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [ 1.245193] but task is already holding lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] other info that might help us debug this: [ 1.245193] Possible unsafe locking scenario: [ 1.245193] [ 1.245193] CPU0 [ 1.245193] ---- [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] [ 1.245193] *** DEADLOCK *** [ 1.245193] [ 1.245193] May be due to missing lock nesting notation [ 1.245193] [ 1.245193] 2 locks held by cp/742: [ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50 [ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] stack backtrace: [ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37 [ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014 [ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5 [ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68 [ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500 [ 1.245193] Call Trace: [ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65 [ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510 [ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0 [ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80 [ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0 [ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280 [ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0 [ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280 [ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0 [ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200 [ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20 [ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f While the lockdep splat is a false positive, becuase path_openat holds i_mutex of the parent directory and ubifs_init_security() tries to acquire i_mutex of a new inode, it reveals that taking i_mutex in ubifs_init_security() is in vain because it is only being called in the inode allocation path and therefore nobody else can see the inode yet. Cc: stable@vger.kernel.org # 3.20- Reported-and-tested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-and-tested-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: dedekind1@gmail.com

commit cf6f54e upstream. Fixes the following lockdep splat: [ 1.244527] ============================================= [ 1.245193] [ INFO: possible recursive locking detected ] [ 1.245193] 4.2.0-rc1+ #37 Not tainted [ 1.245193] --------------------------------------------- [ 1.245193] cp/742 is trying to acquire lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [ 1.245193] but task is already holding lock: [ 1.245193] (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] other info that might help us debug this: [ 1.245193] Possible unsafe locking scenario: [ 1.245193] [ 1.245193] CPU0 [ 1.245193] ---- [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] lock(&sb->s_type->i_mutex_key#9); [ 1.245193] [ 1.245193] *** DEADLOCK *** [ 1.245193] [ 1.245193] May be due to missing lock nesting notation [ 1.245193] [ 1.245193] 2 locks held by cp/742: [ 1.245193] #0: (sb_writers#5){.+.+.+}, at: [<ffffffff811ad37f>] mnt_want_write+0x1f/0x50 [ 1.245193] #1: (&sb->s_type->i_mutex_key#9){+.+.+.}, at: [<ffffffff81198e7f>] path_openat+0x3af/0x1280 [ 1.245193] [ 1.245193] stack backtrace: [ 1.245193] CPU: 2 PID: 742 Comm: cp Not tainted 4.2.0-rc1+ #37 [ 1.245193] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140816_022509-build35 04/01/2014 [ 1.245193] ffffffff8252d530 ffff88007b023a38 ffffffff814f6f49 ffffffff810b56c5 [ 1.245193] ffff88007c30cc80 ffff88007b023af8 ffffffff810a150d ffff88007b023a68 [ 1.245193] 000000008101302a ffff880000000000 00000008f447e23f ffffffff8252d500 [ 1.245193] Call Trace: [ 1.245193] [<ffffffff814f6f49>] dump_stack+0x4c/0x65 [ 1.245193] [<ffffffff810b56c5>] ? console_unlock+0x1c5/0x510 [ 1.245193] [<ffffffff810a150d>] __lock_acquire+0x1a6d/0x1ea0 [ 1.245193] [<ffffffff8109fa78>] ? __lock_is_held+0x58/0x80 [ 1.245193] [<ffffffff810a1a93>] lock_acquire+0xd3/0x270 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff814fc83b>] mutex_lock_nested+0x6b/0x3a0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ? ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff812b3f69>] ubifs_init_security+0x29/0xb0 [ 1.245193] [<ffffffff8128e286>] ubifs_create+0xa6/0x1f0 [ 1.245193] [<ffffffff81198e7f>] ? path_openat+0x3af/0x1280 [ 1.245193] [<ffffffff81195d15>] vfs_create+0x95/0xc0 [ 1.245193] [<ffffffff8119929c>] path_openat+0x7cc/0x1280 [ 1.245193] [<ffffffff8109ffe3>] ? __lock_acquire+0x543/0x1ea0 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff81088c00>] ? calc_global_load_tick+0x60/0x90 [ 1.245193] [<ffffffff81088f20>] ? sched_clock_cpu+0x90/0xc0 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff8119ac55>] do_filp_open+0x75/0xd0 [ 1.245193] [<ffffffff814ffd86>] ? _raw_spin_unlock+0x26/0x40 [ 1.245193] [<ffffffff811a9cef>] ? __alloc_fd+0xaf/0x180 [ 1.245193] [<ffffffff81189bd9>] do_sys_open+0x129/0x200 [ 1.245193] [<ffffffff81189cc9>] SyS_open+0x19/0x20 [ 1.245193] [<ffffffff81500717>] entry_SYSCALL_64_fastpath+0x12/0x6f While the lockdep splat is a false positive, becuase path_openat holds i_mutex of the parent directory and ubifs_init_security() tries to acquire i_mutex of a new inode, it reveals that taking i_mutex in ubifs_init_security() is in vain because it is only being called in the inode allocation path and therefore nobody else can see the inode yet. Reported-and-tested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-and-tested-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: dedekind1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In case the fsl,adck-max-frequency property is not present in the device tree, a division by zero error results during the probe call on kernel boot (see below). This patch fixes it and also restores device tree compatibility in case kernels are booting with old device trees without this property specified. [ 1.063229] Division by zero in kernel. [ 1.067152] CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc5-00212-gcc88cef #37 [ 1.074650] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 1.081135] Backtrace: [ 1.083694] [<800134a4>] (dump_backtrace) from [<8001369c>] (show_stack+0x18/0x1c) [ 1.091340] r7:00000008 r6:8e0ae210 r5:00000000 r4:8e299800 [ 1.097146] [<80013684>] (show_stack) from [<80297b1c>] (dump_stack+0x24/0x28) [ 1.104483] [<80297af8>] (dump_stack) from [<80013608>] (__div0+0x1c/0x20) [ 1.111421] [<800135ec>] (__div0) from [<802968b4>] (Ldiv0+0x8/0x10) [ 1.117865] [<80424350>] (vf610_adc_probe) from [<803153b4>] (platform_drv_probe+0x4c/0xac) [ 1.126311] r10:00000000 r9:8076a5ec r8:00000000 r7:fffffdfb r6:807cc67c r5:8e0ae210 [ 1.134319] r4:807f6c54 [ 1.136915] [<80315368>] (platform_drv_probe) from [<803138bc>] (driver_probe_device+0x20c/0x2f8) [ 1.145882] r7:807cc67c r6:00000000 r5:8e0ae210 r4:807f6c54 [ 1.151657] [<803136b0>] (driver_probe_device) from [<80313a3c>] (__driver_attach+0x94/0x98) [ 1.160190] r9:8076a5ec r8:00000098 r7:00000000 r6:8e0ae244 r5:807cc67c r4:8e0ae210 [ 1.168112] [<803139a8>] (__driver_attach) from [<80311cb8>] (bus_for_each_dev+0x70/0xa4) [ 1.176383] r7:00000000 r6:803139a8 r5:807cc67c r4:00000000 [ 1.182159] [<80311c48>] (bus_for_each_dev) from [<80313318>] (driver_attach+0x24/0x28) [ 1.190260] r6:807bb568 r5:8e2a5b00 r4:807cc67c [ 1.194996] [<803132f4>] (driver_attach) from [<80312f50>] (bus_add_driver+0x1a4/0x21c) [ 1.203113] [<80312dac>] (bus_add_driver) from [<803142a8>] (driver_register+0x80/0x100) [ 1.211275] r7:8e2a7dc0 r6:807a8160 r5:80789e14 r4:807cc67c [ 1.217075] [<80314228>] (driver_register) from [<803152f8>] (__platform_driver_register+0x5c/0x64) [ 1.226216] r5:80789e14 r4:807a8160 [ 1.229877] [<8031529c>] (__platform_driver_register) from [<80789e30>] (vf610_adc_driver_init+0x1c/0x20) [ 1.239556] [<80789e14>] (vf610_adc_driver_init) from [<800095f8>] (do_one_initcall+0x94/0x1dc) [ 1.248365] [<80009564>] (do_one_initcall) from [<8076ae34>] (kernel_init_freeable+0x13c/0x1e0) [ 1.257155] r10:80794830 r9:8076a5ec r8:00000098 r7:807d5780 r6:807d5780 r5:00000006 [ 1.265153] r4:807a0ee8 [ 1.267753] [<8076acf8>] (kernel_init_freeable) from [<80590ef0>] (kernel_init+0x18/0xf0) [ 1.276021] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80590ed8 [ 1.284015] r4:807d5780 [ 1.286615] [<80590ed8>] (kernel_init) from [<8000f878>] (ret_from_fork+0x14/0x3c) [ 1.294278] r5:80590ed8 r4:00000000 Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Fugang Duan <B38611@freescale.com> Acked-by: Stefan Agner <stefan@agner.ch> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>

commit 3b65428 upstream. Even though hid_hw_* checks that passed in data_len is less than HID_MAX_BUFFER_SIZE it is not enough, as i2c-hid does not necessarily allocate buffers of HID_MAX_BUFFER_SIZE but rather checks all device reports and select largest size. In-kernel users normally just send as much data as report needs, so there is no problem, but hidraw users can do whatever they please: BUG: KASAN: slab-out-of-bounds in memcpy+0x34/0x54 at addr ffffffc07135ea80 Write of size 4101 by task syz-executor/8747 CPU: 2 PID: 8747 Comm: syz-executor Tainted: G BU 3.18.0 #37 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc00020ebcc>] dump_backtrace+0x0/0x258 arch/arm64/kernel/traps.c:83 [<ffffffc00020ee40>] show_stack+0x1c/0x2c arch/arm64/kernel/traps.c:172 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc001958114>] dump_stack+0x90/0x140 lib/dump_stack.c:50 [< inline >] print_error_description mm/kasan/report.c:97 [< inline >] kasan_report_error mm/kasan/report.c:278 [<ffffffc0004597dc>] kasan_report+0x268/0x530 mm/kasan/report.c:305 [<ffffffc0004592e8>] __asan_storeN+0x20/0x150 mm/kasan/kasan.c:718 [<ffffffc0004594e0>] memcpy+0x30/0x54 mm/kasan/kasan.c:299 [<ffffffc001306354>] __i2c_hid_command+0x2b0/0x7b4 drivers/hid/i2c-hid/i2c-hid.c:178 [< inline >] i2c_hid_set_or_send_report drivers/hid/i2c-hid/i2c-hid.c:321 [<ffffffc0013079a0>] i2c_hid_output_raw_report.isra.2+0x3d4/0x4b8 drivers/hid/i2c-hid/i2c-hid.c:589 [<ffffffc001307ad8>] i2c_hid_output_report+0x54/0x68 drivers/hid/i2c-hid/i2c-hid.c:602 [< inline >] hid_hw_output_report include/linux/hid.h:1039 [<ffffffc0012cc7a0>] hidraw_send_report+0x400/0x414 drivers/hid/hidraw.c:154 [<ffffffc0012cc7f4>] hidraw_write+0x40/0x64 drivers/hid/hidraw.c:177 [<ffffffc0004681dc>] vfs_write+0x1d4/0x3cc fs/read_write.c:534 [< inline >] SYSC_pwrite64 fs/read_write.c:627 [<ffffffc000468984>] SyS_pwrite64+0xec/0x144 fs/read_write.c:614 Object at ffffffc07135ea80, in cache kmalloc-512 Object allocated with size 268 bytes. Let's check data length against the buffer size before attempting to copy data over. Reported-by: Alexander Potapenko <glider@google.com> Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48 [ 40.569219] #1: (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14) [ 40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4) [ 40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994) [ 40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238) [ 40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110) [ 40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114) [ 40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c) [ 40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

commit d246dcb upstream. [ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a raspberrypi#37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48 [ 40.569219] raspberrypi#1: (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a raspberrypi#37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14) [ 40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4) [ 40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994) [ 40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238) [ 40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110) [ 40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114) [ 40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c) [ 40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d246dcb upstream. [ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48 [ 40.569219] #1: (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14) [ 40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4) [ 40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994) [ 40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238) [ 40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110) [ 40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114) [ 40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c) [ 40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 2518ac5 ("staging: wilc1000: Replace kthread with workqueue for host interface") adds an unconditional destroy_workqueue() on the wilc's "hif_workqueue" soon after its creation thereby rendering it unusable. It then further attempts to queue work onto this non-existing hif_worqueue and results in: Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = de478000 [00000010] *pgd=3eec0831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM Modules linked in: wilc1000_sdio(C) wilc1000(C) CPU: 0 PID: 825 Comm: ifconfig Tainted: G C 4.8.0-rc8+ #37 Hardware name: Atmel SAMA5 task: df56f800 task.stack: deeb0000 PC is at __queue_work+0x90/0x284 LR is at __queue_work+0x58/0x284 pc : [<c0126bb0>] lr : [<c0126b78>] psr: 600f0093 sp : deeb1aa0 ip : def22d78 fp : deea6000 r10: 00000000 r9 : c0a08150 r8 : c0a2f058 r7 : 00000001 r6 : dee9b600 r5 : def22d74 r4 : 00000000 r3 : 00000000 r2 : def22d74 r1 : 07ffffff r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none ... [<c0127060>] (__queue_work) from [<c0127298>] (queue_work_on+0x34/0x40) [<c0127298>] (queue_work_on) from [<bf0076b4>] (wilc_enqueue_cmd+0x54/0x64 [wilc1000]) [<bf0076b4>] (wilc_enqueue_cmd [wilc1000]) from [<bf0082b4>] (wilc_set_wfi_drv_handler+0x48/0x70 [wilc1000]) [<bf0082b4>] (wilc_set_wfi_drv_handler [wilc1000]) from [<bf00509c>] (wilc_mac_open+0x214/0x250 [wilc1000]) [<bf00509c>] (wilc_mac_open [wilc1000]) from [<c04fde98>] (__dev_open+0xb8/0x11c) [<c04fde98>] (__dev_open) from [<c04fe128>] (__dev_change_flags+0x94/0x158) [<c04fe128>] (__dev_change_flags) from [<c04fe204>] (dev_change_flags+0x18/0x48) [<c04fe204>] (dev_change_flags) from [<c0557d5c>] (devinet_ioctl+0x6b4/0x788) [<c0557d5c>] (devinet_ioctl) from [<c04e40a0>] (sock_ioctl+0x154/0x2cc) [<c04e40a0>] (sock_ioctl) from [<c01b16e0>] (do_vfs_ioctl+0x9c/0x878) [<c01b16e0>] (do_vfs_ioctl) from [<c01b1ef0>] (SyS_ioctl+0x34/0x5c) [<c01b1ef0>] (SyS_ioctl) from [<c0107520>] (ret_fast_syscall+0x0/0x3c) Code: e5932004 e1520006 01a04003 0affffff (e5943010) ---[ end trace b612328adaa6bf20 ]--- This fix removes the unnecessary call to destroy_workqueue() while opening the device to avoid the above kernel panic. The deinit routine already does a good job of terminating the workqueue when no longer needed. Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Fixes: 2518ac5 ("staging: wilc1000: Replace kthread with workqueue for host interface") Cc: stable@vger.kernel.org # 4.8+ Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Vince Waver reported the following bug: WARNING: CPU: 0 PID: 21338 at arch/x86/mm/fault.c:435 vmalloc_fault+0x58/0x1f0 CPU: 0 PID: 21338 Comm: perf_fuzzer Not tainted 4.8.0+ #37 Hardware name: Hewlett-Packard HP Compaq Pro 6305 SFF/1850, BIOS K06 v02.57 08/16/2013 Call Trace: <NMI> ? dump_stack+0x46/0x59 ? __warn+0xd5/0xee ? vmalloc_fault+0x58/0x1f0 ? __do_page_fault+0x6d/0x48e ? perf_log_throttle+0xa4/0xf4 ? trace_page_fault+0x22/0x30 ? __unwind_start+0x28/0x42 ? perf_callchain_kernel+0x75/0xac ? get_perf_callchain+0x13a/0x1f0 ? perf_callchain+0x6a/0x6c ? perf_prepare_sample+0x71/0x2eb ? perf_event_output_forward+0x1a/0x54 ? __default_send_IPI_shortcut+0x10/0x2d ? __perf_event_overflow+0xfb/0x167 ? x86_pmu_handle_irq+0x113/0x150 ? native_read_msr+0x6/0x34 ? perf_event_nmi_handler+0x22/0x39 ? perf_ibs_nmi_handler+0x4a/0x51 ? perf_event_nmi_handler+0x22/0x39 ? nmi_handle+0x4d/0xf0 ? perf_ibs_handle_irq+0x3d1/0x3d1 ? default_do_nmi+0x3c/0xd5 ? do_nmi+0x92/0x102 ? end_repeat_nmi+0x1a/0x1e ? entry_SYSCALL_64_after_swapgs+0x12/0x4a ? entry_SYSCALL_64_after_swapgs+0x12/0x4a ? entry_SYSCALL_64_after_swapgs+0x12/0x4a <EOE> ^A4---[ end trace 632723104d47d31a ]--- BUG: stack guard page was hit at ffffc90008500000 (stack is ffffc900084fc000..ffffc900084fffff) kernel stack overflow (page fault): 0000 [#1] SMP ... The NMI hit in the entry code right after setting up the stack pointer from 'cpu_current_top_of_stack', so the kernel stack was empty. The 'guess' version of __unwind_start() attempted to dereference the "top of stack" pointer, which is not actually *on* the stack. Add a check in the guess unwinder to deal with an empty stack. (The frame pointer unwinder already has such a check.) Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 7c7900f ("x86/unwind: Add new unwind interface and implementations") Link: http://lkml.kernel.org/r/20161024133127.e5evgeebdbohnmpb@treble Signed-off-by: Ingo Molnar <mingo@kernel.org>

commit 1d4f1d5 upstream. Commit 2518ac5 ("staging: wilc1000: Replace kthread with workqueue for host interface") adds an unconditional destroy_workqueue() on the wilc's "hif_workqueue" soon after its creation thereby rendering it unusable. It then further attempts to queue work onto this non-existing hif_worqueue and results in: Unable to handle kernel NULL pointer dereference at virtual address 00000010 pgd = de478000 [00000010] *pgd=3eec0831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM Modules linked in: wilc1000_sdio(C) wilc1000(C) CPU: 0 PID: 825 Comm: ifconfig Tainted: G C 4.8.0-rc8+ #37 Hardware name: Atmel SAMA5 task: df56f800 task.stack: deeb0000 PC is at __queue_work+0x90/0x284 LR is at __queue_work+0x58/0x284 pc : [<c0126bb0>] lr : [<c0126b78>] psr: 600f0093 sp : deeb1aa0 ip : def22d78 fp : deea6000 r10: 00000000 r9 : c0a08150 r8 : c0a2f058 r7 : 00000001 r6 : dee9b600 r5 : def22d74 r4 : 00000000 r3 : 00000000 r2 : def22d74 r1 : 07ffffff r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none ... [<c0127060>] (__queue_work) from [<c0127298>] (queue_work_on+0x34/0x40) [<c0127298>] (queue_work_on) from [<bf0076b4>] (wilc_enqueue_cmd+0x54/0x64 [wilc1000]) [<bf0076b4>] (wilc_enqueue_cmd [wilc1000]) from [<bf0082b4>] (wilc_set_wfi_drv_handler+0x48/0x70 [wilc1000]) [<bf0082b4>] (wilc_set_wfi_drv_handler [wilc1000]) from [<bf00509c>] (wilc_mac_open+0x214/0x250 [wilc1000]) [<bf00509c>] (wilc_mac_open [wilc1000]) from [<c04fde98>] (__dev_open+0xb8/0x11c) [<c04fde98>] (__dev_open) from [<c04fe128>] (__dev_change_flags+0x94/0x158) [<c04fe128>] (__dev_change_flags) from [<c04fe204>] (dev_change_flags+0x18/0x48) [<c04fe204>] (dev_change_flags) from [<c0557d5c>] (devinet_ioctl+0x6b4/0x788) [<c0557d5c>] (devinet_ioctl) from [<c04e40a0>] (sock_ioctl+0x154/0x2cc) [<c04e40a0>] (sock_ioctl) from [<c01b16e0>] (do_vfs_ioctl+0x9c/0x878) [<c01b16e0>] (do_vfs_ioctl) from [<c01b1ef0>] (SyS_ioctl+0x34/0x5c) [<c01b1ef0>] (SyS_ioctl) from [<c0107520>] (ret_fast_syscall+0x0/0x3c) Code: e5932004 e1520006 01a04003 0affffff (e5943010) ---[ end trace b612328adaa6bf20 ]--- This fix removes the unnecessary call to destroy_workqueue() while opening the device to avoid the above kernel panic. The deinit routine already does a good job of terminating the workqueue when no longer needed. Reported-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Fixes: 2518ac5 ("staging: wilc1000: Replace kthread with workqueue for host interface") Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit af50e4b ] syzbot caught an infinite recursion in nsh_gso_segment(). Problem here is that we need to make sure the NSH header is of reasonable length. BUG: MAX_LOCK_DEPTH too low! turning off the locking correctness validator. depth: 48 max: 48! 48 locks held by syz-executor0/10189: #0: (ptrval) (rcu_read_lock_bh){....}, at: __dev_queue_xmit+0x30f/0x34c0 net/core/dev.c:3517 #1: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #1: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #2: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #2: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #3: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #3: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #4: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #4: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #5: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #5: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #6: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #6: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #7: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #7: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #8: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #8: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #9: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #9: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #10: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #10: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #11: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #11: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #12: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #12: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #13: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #13: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #14: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #14: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #15: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #15: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #16: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #16: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #17: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #17: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #18: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #18: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #19: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #19: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #20: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #20: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #21: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #21: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #22: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #22: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #23: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #23: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #24: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #24: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #25: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #25: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #26: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #26: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #27: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #27: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #28: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #28: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #29: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #29: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #30: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #30: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #31: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #31: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 dccp_close: ABORT with 65423 bytes unread #32: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #32: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #33: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #33: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #34: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #34: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #35: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #35: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #36: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #36: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #37: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #37: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #38: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #38: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #39: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #39: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #40: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #40: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #41: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #41: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #42: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #42: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #43: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #43: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #44: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #44: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #45: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #45: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #46: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #46: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 #47: (ptrval) (rcu_read_lock){....}, at: __skb_pull include/linux/skbuff.h:2080 [inline] #47: (ptrval) (rcu_read_lock){....}, at: skb_mac_gso_segment+0x221/0x720 net/core/dev.c:2787 INFO: lockdep is turned off. CPU: 1 PID: 10189 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #26 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 __lock_acquire+0x1788/0x5140 kernel/locking/lockdep.c:3449 lock_acquire+0x1dc/0x520 kernel/locking/lockdep.c:3920 rcu_lock_acquire include/linux/rcupdate.h:246 [inline] rcu_read_lock include/linux/rcupdate.h:632 [inline] skb_mac_gso_segment+0x25b/0x720 net/core/dev.c:2789 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 nsh_gso_segment+0x405/0xb60 net/nsh/nsh.c:107 skb_mac_gso_segment+0x3ad/0x720 net/core/dev.c:2792 __skb_gso_segment+0x3bb/0x870 net/core/dev.c:2865 skb_gso_segment include/linux/netdevice.h:4025 [inline] validate_xmit_skb+0x54d/0xd90 net/core/dev.c:3118 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3168 sch_direct_xmit+0x354/0x11e0 net/sched/sch_generic.c:312 qdisc_restart net/sched/sch_generic.c:399 [inline] __qdisc_run+0x741/0x1af0 net/sched/sch_generic.c:410 __dev_xmit_skb net/core/dev.c:3243 [inline] __dev_queue_xmit+0x28ea/0x34c0 net/core/dev.c:3551 dev_queue_xmit+0x17/0x20 net/core/dev.c:3616 packet_snd net/packet/af_packet.c:2951 [inline] packet_sendmsg+0x40f8/0x6070 net/packet/af_packet.c:2976 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:639 __sys_sendto+0x3d7/0x670 net/socket.c:1789 __do_sys_sendto net/socket.c:1801 [inline] __se_sys_sendto net/socket.c:1797 [inline] __x64_sys_sendto+0xe1/0x1a0 net/socket.c:1797 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: c411ed8 ("nsh: add GSO support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Benc <jbenc@redhat.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

[ Upstream commit adba75b ] We get the following warning: [ 47.926140] 32-bit node address hash set to 2010a0a [ 47.927202] [ 47.927433] ================================ [ 47.928050] WARNING: inconsistent lock state [ 47.928661] 4.19.0+ #37 Tainted: G E [ 47.929346] -------------------------------- [ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0 [ 47.930116] {SOFTIRQ-ON-W} state was registered at: [ 47.930116] _raw_spin_lock+0x29/0x60 [ 47.930116] rht_deferred_worker+0x556/0x810 [ 47.930116] process_one_work+0x1f5/0x540 [ 47.930116] worker_thread+0x64/0x3e0 [ 47.930116] kthread+0x112/0x150 [ 47.930116] ret_from_fork+0x3a/0x50 [ 47.930116] irq event stamp: 14044 [ 47.930116] hardirqs last enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0 [ 47.938117] softirqs last enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60 [ 47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0 [ 47.938117] [ 47.938117] other info that might help us debug this: [ 47.938117] Possible unsafe locking scenario: [ 47.938117] [ 47.938117] CPU0 [ 47.938117] ---- [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] <Interrupt> [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] *** DEADLOCK *** [ 47.938117] [ 47.938117] 2 locks held by swapper/3/0: [ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280 [ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc] [ 47.938117] [ 47.938117] stack backtrace: [ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37 [ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 47.938117] Call Trace: [ 47.938117] <IRQ> [ 47.938117] dump_stack+0x5e/0x8b [ 47.938117] print_usage_bug+0x1ed/0x1ff [ 47.938117] mark_lock+0x5b5/0x630 [ 47.938117] __lock_acquire+0x4c0/0x18f0 [ 47.938117] ? lock_acquire+0xa6/0x180 [ 47.938117] lock_acquire+0xa6/0x180 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] _raw_spin_lock+0x29/0x60 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] rhashtable_walk_enter+0x36/0xb0 [ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc] [ 47.938117] ? mark_held_locks+0x6f/0x90 [ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0 [ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc] [ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc] [ 47.938117] ? call_timer_fn+0x5/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] call_timer_fn+0xa1/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] run_timer_softirq+0x1f2/0x4d0 [ 47.938117] __do_softirq+0xfc/0x413 [ 47.938117] irq_exit+0xb5/0xc0 [ 47.938117] smp_apic_timer_interrupt+0xac/0x210 [ 47.938117] apic_timer_interrupt+0xf/0x20 [ 47.938117] </IRQ> [ 47.938117] RIP: 0010:default_idle+0x1c/0x140 [ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b [ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001 [ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200 [ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 [ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200 [ 47.938117] ? default_idle+0x1a/0x140 [ 47.938117] do_idle+0x1bc/0x280 [ 47.938117] cpu_startup_entry+0x19/0x20 [ 47.938117] start_secondary+0x187/0x1c0 [ 47.938117] secondary_startup_64+0xa4/0xb0 The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is calling the function rhashtable_walk_enter() within a timer interrupt. We fix this by executing tipc_net_finalize() in work queue context. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We get the following warning: [ 47.926140] 32-bit node address hash set to 2010a0a [ 47.927202] [ 47.927433] ================================ [ 47.928050] WARNING: inconsistent lock state [ 47.928661] 4.19.0+ #37 Tainted: G E [ 47.929346] -------------------------------- [ 47.929954] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 47.930116] swapper/3/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 47.930116] 00000000af8bc31e (&(&ht->lock)->rlock){+.?.}, at: rhashtable_walk_enter+0x36/0xb0 [ 47.930116] {SOFTIRQ-ON-W} state was registered at: [ 47.930116] _raw_spin_lock+0x29/0x60 [ 47.930116] rht_deferred_worker+0x556/0x810 [ 47.930116] process_one_work+0x1f5/0x540 [ 47.930116] worker_thread+0x64/0x3e0 [ 47.930116] kthread+0x112/0x150 [ 47.930116] ret_from_fork+0x3a/0x50 [ 47.930116] irq event stamp: 14044 [ 47.930116] hardirqs last enabled at (14044): [<ffffffff9a07fbba>] __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] hardirqs last disabled at (14043): [<ffffffff9a07fb81>] __local_bh_enable_ip+0x41/0xf0 [ 47.938117] softirqs last enabled at (14028): [<ffffffff9a0803ee>] irq_enter+0x5e/0x60 [ 47.938117] softirqs last disabled at (14029): [<ffffffff9a0804a5>] irq_exit+0xb5/0xc0 [ 47.938117] [ 47.938117] other info that might help us debug this: [ 47.938117] Possible unsafe locking scenario: [ 47.938117] [ 47.938117] CPU0 [ 47.938117] ---- [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] <Interrupt> [ 47.938117] lock(&(&ht->lock)->rlock); [ 47.938117] [ 47.938117] *** DEADLOCK *** [ 47.938117] [ 47.938117] 2 locks held by swapper/3/0: [ 47.938117] #0: 0000000062c64f90 ((&d->timer)){+.-.}, at: call_timer_fn+0x5/0x280 [ 47.938117] #1: 00000000ee39619c (&(&d->lock)->rlock){+.-.}, at: tipc_disc_timeout+0xc8/0x540 [tipc] [ 47.938117] [ 47.938117] stack backtrace: [ 47.938117] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E 4.19.0+ #37 [ 47.938117] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 47.938117] Call Trace: [ 47.938117] <IRQ> [ 47.938117] dump_stack+0x5e/0x8b [ 47.938117] print_usage_bug+0x1ed/0x1ff [ 47.938117] mark_lock+0x5b5/0x630 [ 47.938117] __lock_acquire+0x4c0/0x18f0 [ 47.938117] ? lock_acquire+0xa6/0x180 [ 47.938117] lock_acquire+0xa6/0x180 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] _raw_spin_lock+0x29/0x60 [ 47.938117] ? rhashtable_walk_enter+0x36/0xb0 [ 47.938117] rhashtable_walk_enter+0x36/0xb0 [ 47.938117] tipc_sk_reinit+0xb0/0x410 [tipc] [ 47.938117] ? mark_held_locks+0x6f/0x90 [ 47.938117] ? __local_bh_enable_ip+0x7a/0xf0 [ 47.938117] ? lockdep_hardirqs_on+0x20/0x1a0 [ 47.938117] tipc_net_finalize+0xbf/0x180 [tipc] [ 47.938117] tipc_disc_timeout+0x509/0x540 [tipc] [ 47.938117] ? call_timer_fn+0x5/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] call_timer_fn+0xa1/0x280 [ 47.938117] ? tipc_disc_msg_xmit.isra.19+0xa0/0xa0 [tipc] [ 47.938117] run_timer_softirq+0x1f2/0x4d0 [ 47.938117] __do_softirq+0xfc/0x413 [ 47.938117] irq_exit+0xb5/0xc0 [ 47.938117] smp_apic_timer_interrupt+0xac/0x210 [ 47.938117] apic_timer_interrupt+0xf/0x20 [ 47.938117] </IRQ> [ 47.938117] RIP: 0010:default_idle+0x1c/0x140 [ 47.938117] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 41 54 55 53 65 8b 2d d8 2b 74 65 0f 1f 44 00 00 e8 c6 2c 8b ff fb f4 <65> 8b 2d c5 2b 74 65 0f 1f 44 00 00 5b 5d 41 5c c3 65 8b 05 b4 2b [ 47.938117] RSP: 0018:ffffaf6ac0207ec8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 47.938117] RAX: ffff8f5b3735e200 RBX: 0000000000000003 RCX: 0000000000000001 [ 47.938117] RDX: 0000000000000001 RSI: 0000000000000001 RDI: ffff8f5b3735e200 [ 47.938117] RBP: 0000000000000003 R08: 0000000000000001 R09: 0000000000000000 [ 47.938117] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 47.938117] R13: 0000000000000000 R14: ffff8f5b3735e200 R15: ffff8f5b3735e200 [ 47.938117] ? default_idle+0x1a/0x140 [ 47.938117] do_idle+0x1bc/0x280 [ 47.938117] cpu_startup_entry+0x19/0x20 [ 47.938117] start_secondary+0x187/0x1c0 [ 47.938117] secondary_startup_64+0xa4/0xb0 The reason seems to be that tipc_net_finalize()->tipc_sk_reinit() is calling the function rhashtable_walk_enter() within a timer interrupt. We fix this by executing tipc_net_finalize() in work queue context. Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…utdown [ Upstream commit 316ae95 ] lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can still occur which in turn tries to access dma apis if lpuart_dma_tx_use flag is true. At this point since dma is torn down, these dma apis can abort. Set lpuart_dma_tx_use and the corresponding rx flag lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not accessed after they are relinquished. Otherwise, when try to kill btattach, kernel may panic. This patch may fix this issue. root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200 ^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 90.189806] Modules linked in: moal(O) mlan(O) [ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37 [ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT) [ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60 [ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c [ 90.225237] sp : ffff800013f0bac0 [ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800 [ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00 [ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000 [ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000 [ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040 [ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090 [ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804 [ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480 [ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800 [ 90.299876] Call trace: [ 90.302321] fsl_edma3_disable_request+0x8/0x60 [ 90.306851] lpuart_flush_buffer+0x40/0x160 [ 90.311037] uart_flush_buffer+0x88/0x120 [ 90.315050] tty_driver_flush_buffer+0x20/0x30 [ 90.319496] hci_uart_flush+0x44/0x90 [ 90.323162] +0x34/0x12c [ 90.327253] tty_ldisc_close+0x38/0x70 [ 90.331005] tty_ldisc_release+0xa8/0x190 [ 90.335018] tty_release_struct+0x24/0x8c [ 90.339022] tty_release+0x3ec/0x4c0 [ 90.342593] __fput+0x70/0x234 [ 90.345652] ____fput+0x14/0x20 [ 90.348790] task_work_run+0x84/0x17c [ 90.352455] do_exit+0x310/0x96c [ 90.355688] do_group_exit+0x3c/0xa0 [ 90.359259] __arm64_sys_exit_group+0x1c/0x20 [ 90.363609] invoke_syscall+0x48/0x114 [ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc [ 90.372068] do_el0_svc+0x2c/0x94 [ 90.375379] el0_svc+0x28/0x80 [ 90.378438] el0t_64_sync_handler+0xa8/0x130 [ 90.382711] el0t_64_sync+0x1a0/0x1a4 [ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041) [ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]--- [ 90.397073] note: btattach[503] exited with preempt_count 1 [ 90.402636] Fixing recursive fault but reboot is needed! Fixes: 6250cc3 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx") Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Thara Gopinath <tgopinath@microsoft.com> Signed-off-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220920111703.1532-1-sherry.sun@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4d42ecd ] indx_read is called when we have some NTFS directory operations that need more information from the index buffers. This adds a sanity check to make sure the returned index buffer length is legit, or we may have some out-of-bound memory accesses. [ 560.897595] BUG: KASAN: slab-out-of-bounds in hdr_find_e.isra.0+0x10c/0x320 [ 560.898321] Read of size 2 at addr ffff888009497238 by task exp/245 [ 560.898760] [ 560.899129] CPU: 0 PID: 245 Comm: exp Not tainted 6.0.0-rc6 #37 [ 560.899505] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 560.900170] Call Trace: [ 560.900407] <TASK> [ 560.900732] dump_stack_lvl+0x49/0x63 [ 560.901108] print_report.cold+0xf5/0x689 [ 560.901395] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.901716] kasan_report+0xa7/0x130 [ 560.901950] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.902208] __asan_load2+0x68/0x90 [ 560.902427] hdr_find_e.isra.0+0x10c/0x320 [ 560.902846] ? cmp_uints+0xe0/0xe0 [ 560.903363] ? cmp_sdh+0x90/0x90 [ 560.903883] ? ntfs_bread_run+0x190/0x190 [ 560.904196] ? rwsem_down_read_slowpath+0x750/0x750 [ 560.904969] ? ntfs_fix_post_read+0xe0/0x130 [ 560.905259] ? __kasan_check_write+0x14/0x20 [ 560.905599] ? up_read+0x1a/0x90 [ 560.905853] ? indx_read+0x22c/0x380 [ 560.906096] indx_find+0x2ef/0x470 [ 560.906352] ? indx_find_buffer+0x2d0/0x2d0 [ 560.906692] ? __kasan_kmalloc+0x88/0xb0 [ 560.906977] dir_search_u+0x196/0x2f0 [ 560.907220] ? ntfs_nls_to_utf16+0x450/0x450 [ 560.907464] ? __kasan_check_write+0x14/0x20 [ 560.907747] ? mutex_lock+0x8f/0xe0 [ 560.907970] ? __mutex_lock_slowpath+0x20/0x20 [ 560.908214] ? kmem_cache_alloc+0x143/0x4b0 [ 560.908459] ntfs_lookup+0xe0/0x100 [ 560.908788] __lookup_slow+0x116/0x220 [ 560.909050] ? lookup_fast+0x1b0/0x1b0 [ 560.909309] ? lookup_fast+0x13f/0x1b0 [ 560.909601] walk_component+0x187/0x230 [ 560.909944] link_path_walk.part.0+0x3f0/0x660 [ 560.910285] ? handle_lookup_down+0x90/0x90 [ 560.910618] ? path_init+0x642/0x6e0 [ 560.911084] ? percpu_counter_add_batch+0x6e/0xf0 [ 560.912559] ? __alloc_file+0x114/0x170 [ 560.913008] path_openat+0x19c/0x1d10 [ 560.913419] ? getname_flags+0x73/0x2b0 [ 560.913815] ? kasan_save_stack+0x3a/0x50 [ 560.914125] ? kasan_save_stack+0x26/0x50 [ 560.914542] ? __kasan_slab_alloc+0x6d/0x90 [ 560.914924] ? kmem_cache_alloc+0x143/0x4b0 [ 560.915339] ? getname_flags+0x73/0x2b0 [ 560.915647] ? getname+0x12/0x20 [ 560.916114] ? __x64_sys_open+0x4c/0x60 [ 560.916460] ? path_lookupat.isra.0+0x230/0x230 [ 560.916867] ? __isolate_free_page+0x2e0/0x2e0 [ 560.917194] do_filp_open+0x15c/0x1f0 [ 560.917448] ? may_open_dev+0x60/0x60 [ 560.917696] ? expand_files+0xa4/0x3a0 [ 560.917923] ? __kasan_check_write+0x14/0x20 [ 560.918185] ? _raw_spin_lock+0x88/0xdb [ 560.918409] ? _raw_spin_lock_irqsave+0x100/0x100 [ 560.918783] ? _find_next_bit+0x4a/0x130 [ 560.919026] ? _raw_spin_unlock+0x19/0x40 [ 560.919276] ? alloc_fd+0x14b/0x2d0 [ 560.919635] do_sys_openat2+0x32a/0x4b0 [ 560.920035] ? file_open_root+0x230/0x230 [ 560.920336] ? __rcu_read_unlock+0x5b/0x280 [ 560.920813] do_sys_open+0x99/0xf0 [ 560.921208] ? filp_open+0x60/0x60 [ 560.921482] ? exit_to_user_mode_prepare+0x49/0x180 [ 560.921867] __x64_sys_open+0x4c/0x60 [ 560.922128] do_syscall_64+0x3b/0x90 [ 560.922369] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.923030] RIP: 0033:0x7f7dff2e4469 [ 560.923681] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 560.924451] RSP: 002b:00007ffd41a210b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000002 [ 560.925168] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7dff2e4469 [ 560.925655] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00007ffd41a211f0 [ 560.926085] RBP: 00007ffd41a252a0 R08: 00007f7dff60fba0 R09: 00007ffd41a25388 [ 560.926405] R10: 0000000000400b80 R11: 0000000000000206 R12: 00000000004004e0 [ 560.926867] R13: 00007ffd41a25380 R14: 0000000000000000 R15: 0000000000000000 [ 560.927241] </TASK> [ 560.927491] [ 560.927755] Allocated by task 245: [ 560.928409] kasan_save_stack+0x26/0x50 [ 560.929271] __kasan_kmalloc+0x88/0xb0 [ 560.929778] __kmalloc+0x192/0x320 [ 560.930023] indx_read+0x249/0x380 [ 560.930224] indx_find+0x2a2/0x470 [ 560.930695] dir_search_u+0x196/0x2f0 [ 560.930892] ntfs_lookup+0xe0/0x100 [ 560.931115] __lookup_slow+0x116/0x220 [ 560.931323] walk_component+0x187/0x230 [ 560.931570] link_path_walk.part.0+0x3f0/0x660 [ 560.931791] path_openat+0x19c/0x1d10 [ 560.932008] do_filp_open+0x15c/0x1f0 [ 560.932226] do_sys_openat2+0x32a/0x4b0 [ 560.932413] do_sys_open+0x99/0xf0 [ 560.932709] __x64_sys_open+0x4c/0x60 [ 560.933417] do_syscall_64+0x3b/0x90 [ 560.933776] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.934235] [ 560.934486] The buggy address belongs to the object at ffff888009497000 [ 560.934486] which belongs to the cache kmalloc-512 of size 512 [ 560.935239] The buggy address is located 56 bytes to the right of [ 560.935239] 512-byte region [ffff888009497000, ffff888009497200) [ 560.936153] [ 560.937326] The buggy address belongs to the physical page: [ 560.938228] page:0000000062a3dfae refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9496 [ 560.939616] head:0000000062a3dfae order:1 compound_mapcount:0 compound_pincount:0 [ 560.940219] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 560.942702] raw: 000fffffc0010200 ffffea0000164f80 dead000000000005 ffff888001041c80 [ 560.943932] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000 [ 560.944568] page dumped because: kasan: bad access detected [ 560.945735] [ 560.946112] Memory state around the buggy address: [ 560.946870] ffff888009497100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 560.947242] ffff888009497180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 560.947611] >ffff888009497200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 560.947915] ^ [ 560.948249] ffff888009497280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 560.948687] ffff888009497300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 54e4570 ] Though we already have some sanity checks while enumerating attributes, resident attribute names aren't included. This patch checks the resident attribute names are in the valid ranges. [ 259.209031] BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0x1e1/0x850 [ 259.210770] Write of size 426 at addr ffff88800632f2b2 by task exp/255 [ 259.211551] [ 259.212035] CPU: 0 PID: 255 Comm: exp Not tainted 6.0.0-rc6 #37 [ 259.212955] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 259.214387] Call Trace: [ 259.214640] <TASK> [ 259.214895] dump_stack_lvl+0x49/0x63 [ 259.215284] print_report.cold+0xf5/0x689 [ 259.215565] ? kasan_poison+0x3c/0x50 [ 259.215778] ? kasan_unpoison+0x28/0x60 [ 259.215991] ? ni_create_attr_list+0x1e1/0x850 [ 259.216270] kasan_report+0xa7/0x130 [ 259.216481] ? ni_create_attr_list+0x1e1/0x850 [ 259.216719] kasan_check_range+0x15a/0x1d0 [ 259.216939] memcpy+0x3c/0x70 [ 259.217136] ni_create_attr_list+0x1e1/0x850 [ 259.217945] ? __rcu_read_unlock+0x5b/0x280 [ 259.218384] ? ni_remove_attr+0x2e0/0x2e0 [ 259.218712] ? kernel_text_address+0xcf/0xe0 [ 259.219064] ? __kernel_text_address+0x12/0x40 [ 259.219434] ? arch_stack_walk+0x9e/0xf0 [ 259.219668] ? __this_cpu_preempt_check+0x13/0x20 [ 259.219904] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 259.220140] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 259.220561] ni_ins_attr_ext+0x52c/0x5c0 [ 259.220984] ? ni_create_attr_list+0x850/0x850 [ 259.221532] ? run_deallocate+0x120/0x120 [ 259.221972] ? vfs_setxattr+0x128/0x300 [ 259.222688] ? setxattr+0x126/0x140 [ 259.222921] ? path_setxattr+0x164/0x180 [ 259.223431] ? __x64_sys_setxattr+0x6d/0x80 [ 259.223828] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.224417] ? mi_find_attr+0x3c/0xf0 [ 259.224772] ni_insert_attr+0x1ba/0x420 [ 259.225216] ? ni_ins_attr_ext+0x5c0/0x5c0 [ 259.225504] ? ntfs_read_ea+0x119/0x450 [ 259.225775] ni_insert_resident+0xc0/0x1c0 [ 259.226316] ? ni_insert_nonresident+0x400/0x400 [ 259.227001] ? __kasan_kmalloc+0x88/0xb0 [ 259.227468] ? __kmalloc+0x192/0x320 [ 259.227773] ntfs_set_ea+0x6bf/0xb30 [ 259.228216] ? ftrace_graph_ret_addr+0x2a/0xb0 [ 259.228494] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.228838] ? ntfs_read_ea+0x450/0x450 [ 259.229098] ? is_bpf_text_address+0x24/0x40 [ 259.229418] ? kernel_text_address+0xcf/0xe0 [ 259.229681] ? __kernel_text_address+0x12/0x40 [ 259.229948] ? unwind_get_return_address+0x3a/0x60 [ 259.230271] ? write_profile+0x270/0x270 [ 259.230537] ? arch_stack_walk+0x9e/0xf0 [ 259.230836] ntfs_setxattr+0x114/0x5c0 [ 259.231099] ? ntfs_set_acl_ex+0x2e0/0x2e0 [ 259.231529] ? evm_protected_xattr_common+0x6d/0x100 [ 259.231817] ? posix_xattr_acl+0x13/0x80 [ 259.232073] ? evm_protect_xattr+0x1f7/0x440 [ 259.232351] __vfs_setxattr+0xda/0x120 [ 259.232635] ? xattr_resolve_name+0x180/0x180 [ 259.232912] __vfs_setxattr_noperm+0x93/0x300 [ 259.233219] __vfs_setxattr_locked+0x141/0x160 [ 259.233492] ? kasan_poison+0x3c/0x50 [ 259.233744] vfs_setxattr+0x128/0x300 [ 259.234002] ? __vfs_setxattr_locked+0x160/0x160 [ 259.234837] do_setxattr+0xb8/0x170 [ 259.235567] ? vmemdup_user+0x53/0x90 [ 259.236212] setxattr+0x126/0x140 [ 259.236491] ? do_setxattr+0x170/0x170 [ 259.236791] ? debug_smp_processor_id+0x17/0x20 [ 259.237232] ? kasan_quarantine_put+0x57/0x180 [ 259.237605] ? putname+0x80/0xa0 [ 259.237870] ? __kasan_slab_free+0x11c/0x1b0 [ 259.238234] ? putname+0x80/0xa0 [ 259.238500] ? preempt_count_sub+0x18/0xc0 [ 259.238775] ? __mnt_want_write+0xaa/0x100 [ 259.238990] ? mnt_want_write+0x8b/0x150 [ 259.239290] path_setxattr+0x164/0x180 [ 259.239605] ? setxattr+0x140/0x140 [ 259.239849] ? debug_smp_processor_id+0x17/0x20 [ 259.240174] ? fpregs_assert_state_consistent+0x67/0x80 [ 259.240411] __x64_sys_setxattr+0x6d/0x80 [ 259.240715] do_syscall_64+0x3b/0x90 [ 259.240934] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.241697] RIP: 0033:0x7fc6b26e4469 [ 259.242647] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 259.244512] RSP: 002b:00007ffc3c7841f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000bc [ 259.245086] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc6b26e4469 [ 259.246025] RDX: 00007ffc3c784380 RSI: 00007ffc3c7842e0 RDI: 00007ffc3c784238 [ 259.246961] RBP: 00007ffc3c788410 R08: 0000000000000001 R09: 00007ffc3c7884f8 [ 259.247775] R10: 000000000000007f R11: 0000000000000217 R12: 00000000004004e0 [ 259.248534] R13: 00007ffc3c7884f0 R14: 0000000000000000 R15: 0000000000000000 [ 259.249368] </TASK> [ 259.249644] [ 259.249888] Allocated by task 255: [ 259.250283] kasan_save_stack+0x26/0x50 [ 259.250957] __kasan_kmalloc+0x88/0xb0 [ 259.251826] __kmalloc+0x192/0x320 [ 259.252745] ni_create_attr_list+0x11e/0x850 [ 259.253298] ni_ins_attr_ext+0x52c/0x5c0 [ 259.253685] ni_insert_attr+0x1ba/0x420 [ 259.253974] ni_insert_resident+0xc0/0x1c0 [ 259.254311] ntfs_set_ea+0x6bf/0xb30 [ 259.254629] ntfs_setxattr+0x114/0x5c0 [ 259.254859] __vfs_setxattr+0xda/0x120 [ 259.255155] __vfs_setxattr_noperm+0x93/0x300 [ 259.255445] __vfs_setxattr_locked+0x141/0x160 [ 259.255862] vfs_setxattr+0x128/0x300 [ 259.256251] do_setxattr+0xb8/0x170 [ 259.256522] setxattr+0x126/0x140 [ 259.256911] path_setxattr+0x164/0x180 [ 259.257308] __x64_sys_setxattr+0x6d/0x80 [ 259.257637] do_syscall_64+0x3b/0x90 [ 259.257970] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.258550] [ 259.258772] The buggy address belongs to the object at ffff88800632f000 [ 259.258772] which belongs to the cache kmalloc-1k of size 1024 [ 259.260190] The buggy address is located 690 bytes inside of [ 259.260190] 1024-byte region [ffff88800632f000, ffff88800632f400) [ 259.261412] [ 259.261743] The buggy address belongs to the physical page: [ 259.262354] page:0000000081e8cac9 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x632c [ 259.263722] head:0000000081e8cac9 order:2 compound_mapcount:0 compound_pincount:0 [ 259.264284] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 259.265312] raw: 000fffffc0010200 ffffea0000060d00 dead000000000004 ffff888001041dc0 [ 259.265772] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000 [ 259.266305] page dumped because: kasan: bad access detected [ 259.266588] [ 259.266728] Memory state around the buggy address: [ 259.267225] ffff88800632f300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 259.267841] ffff88800632f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 259.269111] >ffff88800632f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 259.269626] ^ [ 259.270162] ffff88800632f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 259.270810] ffff88800632f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4d42ecd ] indx_read is called when we have some NTFS directory operations that need more information from the index buffers. This adds a sanity check to make sure the returned index buffer length is legit, or we may have some out-of-bound memory accesses. [ 560.897595] BUG: KASAN: slab-out-of-bounds in hdr_find_e.isra.0+0x10c/0x320 [ 560.898321] Read of size 2 at addr ffff888009497238 by task exp/245 [ 560.898760] [ 560.899129] CPU: 0 PID: 245 Comm: exp Not tainted 6.0.0-rc6 #37 [ 560.899505] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 560.900170] Call Trace: [ 560.900407] <TASK> [ 560.900732] dump_stack_lvl+0x49/0x63 [ 560.901108] print_report.cold+0xf5/0x689 [ 560.901395] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.901716] kasan_report+0xa7/0x130 [ 560.901950] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.902208] __asan_load2+0x68/0x90 [ 560.902427] hdr_find_e.isra.0+0x10c/0x320 [ 560.902846] ? cmp_uints+0xe0/0xe0 [ 560.903363] ? cmp_sdh+0x90/0x90 [ 560.903883] ? ntfs_bread_run+0x190/0x190 [ 560.904196] ? rwsem_down_read_slowpath+0x750/0x750 [ 560.904969] ? ntfs_fix_post_read+0xe0/0x130 [ 560.905259] ? __kasan_check_write+0x14/0x20 [ 560.905599] ? up_read+0x1a/0x90 [ 560.905853] ? indx_read+0x22c/0x380 [ 560.906096] indx_find+0x2ef/0x470 [ 560.906352] ? indx_find_buffer+0x2d0/0x2d0 [ 560.906692] ? __kasan_kmalloc+0x88/0xb0 [ 560.906977] dir_search_u+0x196/0x2f0 [ 560.907220] ? ntfs_nls_to_utf16+0x450/0x450 [ 560.907464] ? __kasan_check_write+0x14/0x20 [ 560.907747] ? mutex_lock+0x8f/0xe0 [ 560.907970] ? __mutex_lock_slowpath+0x20/0x20 [ 560.908214] ? kmem_cache_alloc+0x143/0x4b0 [ 560.908459] ntfs_lookup+0xe0/0x100 [ 560.908788] __lookup_slow+0x116/0x220 [ 560.909050] ? lookup_fast+0x1b0/0x1b0 [ 560.909309] ? lookup_fast+0x13f/0x1b0 [ 560.909601] walk_component+0x187/0x230 [ 560.909944] link_path_walk.part.0+0x3f0/0x660 [ 560.910285] ? handle_lookup_down+0x90/0x90 [ 560.910618] ? path_init+0x642/0x6e0 [ 560.911084] ? percpu_counter_add_batch+0x6e/0xf0 [ 560.912559] ? __alloc_file+0x114/0x170 [ 560.913008] path_openat+0x19c/0x1d10 [ 560.913419] ? getname_flags+0x73/0x2b0 [ 560.913815] ? kasan_save_stack+0x3a/0x50 [ 560.914125] ? kasan_save_stack+0x26/0x50 [ 560.914542] ? __kasan_slab_alloc+0x6d/0x90 [ 560.914924] ? kmem_cache_alloc+0x143/0x4b0 [ 560.915339] ? getname_flags+0x73/0x2b0 [ 560.915647] ? getname+0x12/0x20 [ 560.916114] ? __x64_sys_open+0x4c/0x60 [ 560.916460] ? path_lookupat.isra.0+0x230/0x230 [ 560.916867] ? __isolate_free_page+0x2e0/0x2e0 [ 560.917194] do_filp_open+0x15c/0x1f0 [ 560.917448] ? may_open_dev+0x60/0x60 [ 560.917696] ? expand_files+0xa4/0x3a0 [ 560.917923] ? __kasan_check_write+0x14/0x20 [ 560.918185] ? _raw_spin_lock+0x88/0xdb [ 560.918409] ? _raw_spin_lock_irqsave+0x100/0x100 [ 560.918783] ? _find_next_bit+0x4a/0x130 [ 560.919026] ? _raw_spin_unlock+0x19/0x40 [ 560.919276] ? alloc_fd+0x14b/0x2d0 [ 560.919635] do_sys_openat2+0x32a/0x4b0 [ 560.920035] ? file_open_root+0x230/0x230 [ 560.920336] ? __rcu_read_unlock+0x5b/0x280 [ 560.920813] do_sys_open+0x99/0xf0 [ 560.921208] ? filp_open+0x60/0x60 [ 560.921482] ? exit_to_user_mode_prepare+0x49/0x180 [ 560.921867] __x64_sys_open+0x4c/0x60 [ 560.922128] do_syscall_64+0x3b/0x90 [ 560.922369] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.923030] RIP: 0033:0x7f7dff2e4469 [ 560.923681] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 560.924451] RSP: 002b:00007ffd41a210b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000002 [ 560.925168] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7dff2e4469 [ 560.925655] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00007ffd41a211f0 [ 560.926085] RBP: 00007ffd41a252a0 R08: 00007f7dff60fba0 R09: 00007ffd41a25388 [ 560.926405] R10: 0000000000400b80 R11: 0000000000000206 R12: 00000000004004e0 [ 560.926867] R13: 00007ffd41a25380 R14: 0000000000000000 R15: 0000000000000000 [ 560.927241] </TASK> [ 560.927491] [ 560.927755] Allocated by task 245: [ 560.928409] kasan_save_stack+0x26/0x50 [ 560.929271] __kasan_kmalloc+0x88/0xb0 [ 560.929778] __kmalloc+0x192/0x320 [ 560.930023] indx_read+0x249/0x380 [ 560.930224] indx_find+0x2a2/0x470 [ 560.930695] dir_search_u+0x196/0x2f0 [ 560.930892] ntfs_lookup+0xe0/0x100 [ 560.931115] __lookup_slow+0x116/0x220 [ 560.931323] walk_component+0x187/0x230 [ 560.931570] link_path_walk.part.0+0x3f0/0x660 [ 560.931791] path_openat+0x19c/0x1d10 [ 560.932008] do_filp_open+0x15c/0x1f0 [ 560.932226] do_sys_openat2+0x32a/0x4b0 [ 560.932413] do_sys_open+0x99/0xf0 [ 560.932709] __x64_sys_open+0x4c/0x60 [ 560.933417] do_syscall_64+0x3b/0x90 [ 560.933776] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.934235] [ 560.934486] The buggy address belongs to the object at ffff888009497000 [ 560.934486] which belongs to the cache kmalloc-512 of size 512 [ 560.935239] The buggy address is located 56 bytes to the right of [ 560.935239] 512-byte region [ffff888009497000, ffff888009497200) [ 560.936153] [ 560.937326] The buggy address belongs to the physical page: [ 560.938228] page:0000000062a3dfae refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9496 [ 560.939616] head:0000000062a3dfae order:1 compound_mapcount:0 compound_pincount:0 [ 560.940219] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 560.942702] raw: 000fffffc0010200 ffffea0000164f80 dead000000000005 ffff888001041c80 [ 560.943932] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000 [ 560.944568] page dumped because: kasan: bad access detected [ 560.945735] [ 560.946112] Memory state around the buggy address: [ 560.946870] ffff888009497100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 560.947242] ffff888009497180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 560.947611] >ffff888009497200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 560.947915] ^ [ 560.948249] ffff888009497280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 560.948687] ffff888009497300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 54e4570 ] Though we already have some sanity checks while enumerating attributes, resident attribute names aren't included. This patch checks the resident attribute names are in the valid ranges. [ 259.209031] BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0x1e1/0x850 [ 259.210770] Write of size 426 at addr ffff88800632f2b2 by task exp/255 [ 259.211551] [ 259.212035] CPU: 0 PID: 255 Comm: exp Not tainted 6.0.0-rc6 #37 [ 259.212955] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 259.214387] Call Trace: [ 259.214640] <TASK> [ 259.214895] dump_stack_lvl+0x49/0x63 [ 259.215284] print_report.cold+0xf5/0x689 [ 259.215565] ? kasan_poison+0x3c/0x50 [ 259.215778] ? kasan_unpoison+0x28/0x60 [ 259.215991] ? ni_create_attr_list+0x1e1/0x850 [ 259.216270] kasan_report+0xa7/0x130 [ 259.216481] ? ni_create_attr_list+0x1e1/0x850 [ 259.216719] kasan_check_range+0x15a/0x1d0 [ 259.216939] memcpy+0x3c/0x70 [ 259.217136] ni_create_attr_list+0x1e1/0x850 [ 259.217945] ? __rcu_read_unlock+0x5b/0x280 [ 259.218384] ? ni_remove_attr+0x2e0/0x2e0 [ 259.218712] ? kernel_text_address+0xcf/0xe0 [ 259.219064] ? __kernel_text_address+0x12/0x40 [ 259.219434] ? arch_stack_walk+0x9e/0xf0 [ 259.219668] ? __this_cpu_preempt_check+0x13/0x20 [ 259.219904] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 259.220140] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 259.220561] ni_ins_attr_ext+0x52c/0x5c0 [ 259.220984] ? ni_create_attr_list+0x850/0x850 [ 259.221532] ? run_deallocate+0x120/0x120 [ 259.221972] ? vfs_setxattr+0x128/0x300 [ 259.222688] ? setxattr+0x126/0x140 [ 259.222921] ? path_setxattr+0x164/0x180 [ 259.223431] ? __x64_sys_setxattr+0x6d/0x80 [ 259.223828] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.224417] ? mi_find_attr+0x3c/0xf0 [ 259.224772] ni_insert_attr+0x1ba/0x420 [ 259.225216] ? ni_ins_attr_ext+0x5c0/0x5c0 [ 259.225504] ? ntfs_read_ea+0x119/0x450 [ 259.225775] ni_insert_resident+0xc0/0x1c0 [ 259.226316] ? ni_insert_nonresident+0x400/0x400 [ 259.227001] ? __kasan_kmalloc+0x88/0xb0 [ 259.227468] ? __kmalloc+0x192/0x320 [ 259.227773] ntfs_set_ea+0x6bf/0xb30 [ 259.228216] ? ftrace_graph_ret_addr+0x2a/0xb0 [ 259.228494] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.228838] ? ntfs_read_ea+0x450/0x450 [ 259.229098] ? is_bpf_text_address+0x24/0x40 [ 259.229418] ? kernel_text_address+0xcf/0xe0 [ 259.229681] ? __kernel_text_address+0x12/0x40 [ 259.229948] ? unwind_get_return_address+0x3a/0x60 [ 259.230271] ? write_profile+0x270/0x270 [ 259.230537] ? arch_stack_walk+0x9e/0xf0 [ 259.230836] ntfs_setxattr+0x114/0x5c0 [ 259.231099] ? ntfs_set_acl_ex+0x2e0/0x2e0 [ 259.231529] ? evm_protected_xattr_common+0x6d/0x100 [ 259.231817] ? posix_xattr_acl+0x13/0x80 [ 259.232073] ? evm_protect_xattr+0x1f7/0x440 [ 259.232351] __vfs_setxattr+0xda/0x120 [ 259.232635] ? xattr_resolve_name+0x180/0x180 [ 259.232912] __vfs_setxattr_noperm+0x93/0x300 [ 259.233219] __vfs_setxattr_locked+0x141/0x160 [ 259.233492] ? kasan_poison+0x3c/0x50 [ 259.233744] vfs_setxattr+0x128/0x300 [ 259.234002] ? __vfs_setxattr_locked+0x160/0x160 [ 259.234837] do_setxattr+0xb8/0x170 [ 259.235567] ? vmemdup_user+0x53/0x90 [ 259.236212] setxattr+0x126/0x140 [ 259.236491] ? do_setxattr+0x170/0x170 [ 259.236791] ? debug_smp_processor_id+0x17/0x20 [ 259.237232] ? kasan_quarantine_put+0x57/0x180 [ 259.237605] ? putname+0x80/0xa0 [ 259.237870] ? __kasan_slab_free+0x11c/0x1b0 [ 259.238234] ? putname+0x80/0xa0 [ 259.238500] ? preempt_count_sub+0x18/0xc0 [ 259.238775] ? __mnt_want_write+0xaa/0x100 [ 259.238990] ? mnt_want_write+0x8b/0x150 [ 259.239290] path_setxattr+0x164/0x180 [ 259.239605] ? setxattr+0x140/0x140 [ 259.239849] ? debug_smp_processor_id+0x17/0x20 [ 259.240174] ? fpregs_assert_state_consistent+0x67/0x80 [ 259.240411] __x64_sys_setxattr+0x6d/0x80 [ 259.240715] do_syscall_64+0x3b/0x90 [ 259.240934] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.241697] RIP: 0033:0x7fc6b26e4469 [ 259.242647] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 259.244512] RSP: 002b:00007ffc3c7841f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000bc [ 259.245086] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc6b26e4469 [ 259.246025] RDX: 00007ffc3c784380 RSI: 00007ffc3c7842e0 RDI: 00007ffc3c784238 [ 259.246961] RBP: 00007ffc3c788410 R08: 0000000000000001 R09: 00007ffc3c7884f8 [ 259.247775] R10: 000000000000007f R11: 0000000000000217 R12: 00000000004004e0 [ 259.248534] R13: 00007ffc3c7884f0 R14: 0000000000000000 R15: 0000000000000000 [ 259.249368] </TASK> [ 259.249644] [ 259.249888] Allocated by task 255: [ 259.250283] kasan_save_stack+0x26/0x50 [ 259.250957] __kasan_kmalloc+0x88/0xb0 [ 259.251826] __kmalloc+0x192/0x320 [ 259.252745] ni_create_attr_list+0x11e/0x850 [ 259.253298] ni_ins_attr_ext+0x52c/0x5c0 [ 259.253685] ni_insert_attr+0x1ba/0x420 [ 259.253974] ni_insert_resident+0xc0/0x1c0 [ 259.254311] ntfs_set_ea+0x6bf/0xb30 [ 259.254629] ntfs_setxattr+0x114/0x5c0 [ 259.254859] __vfs_setxattr+0xda/0x120 [ 259.255155] __vfs_setxattr_noperm+0x93/0x300 [ 259.255445] __vfs_setxattr_locked+0x141/0x160 [ 259.255862] vfs_setxattr+0x128/0x300 [ 259.256251] do_setxattr+0xb8/0x170 [ 259.256522] setxattr+0x126/0x140 [ 259.256911] path_setxattr+0x164/0x180 [ 259.257308] __x64_sys_setxattr+0x6d/0x80 [ 259.257637] do_syscall_64+0x3b/0x90 [ 259.257970] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.258550] [ 259.258772] The buggy address belongs to the object at ffff88800632f000 [ 259.258772] which belongs to the cache kmalloc-1k of size 1024 [ 259.260190] The buggy address is located 690 bytes inside of [ 259.260190] 1024-byte region [ffff88800632f000, ffff88800632f400) [ 259.261412] [ 259.261743] The buggy address belongs to the physical page: [ 259.262354] page:0000000081e8cac9 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x632c [ 259.263722] head:0000000081e8cac9 order:2 compound_mapcount:0 compound_pincount:0 [ 259.264284] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 259.265312] raw: 000fffffc0010200 ffffea0000060d00 dead000000000004 ffff888001041dc0 [ 259.265772] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000 [ 259.266305] page dumped because: kasan: bad access detected [ 259.266588] [ 259.266728] Memory state around the buggy address: [ 259.267225] ffff88800632f300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 259.267841] ffff88800632f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 259.269111] >ffff88800632f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 259.269626] ^ [ 259.270162] ffff88800632f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 259.270810] ffff88800632f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4d42ecd ] indx_read is called when we have some NTFS directory operations that need more information from the index buffers. This adds a sanity check to make sure the returned index buffer length is legit, or we may have some out-of-bound memory accesses. [ 560.897595] BUG: KASAN: slab-out-of-bounds in hdr_find_e.isra.0+0x10c/0x320 [ 560.898321] Read of size 2 at addr ffff888009497238 by task exp/245 [ 560.898760] [ 560.899129] CPU: 0 PID: 245 Comm: exp Not tainted 6.0.0-rc6 #37 [ 560.899505] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 560.900170] Call Trace: [ 560.900407] <TASK> [ 560.900732] dump_stack_lvl+0x49/0x63 [ 560.901108] print_report.cold+0xf5/0x689 [ 560.901395] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.901716] kasan_report+0xa7/0x130 [ 560.901950] ? hdr_find_e.isra.0+0x10c/0x320 [ 560.902208] __asan_load2+0x68/0x90 [ 560.902427] hdr_find_e.isra.0+0x10c/0x320 [ 560.902846] ? cmp_uints+0xe0/0xe0 [ 560.903363] ? cmp_sdh+0x90/0x90 [ 560.903883] ? ntfs_bread_run+0x190/0x190 [ 560.904196] ? rwsem_down_read_slowpath+0x750/0x750 [ 560.904969] ? ntfs_fix_post_read+0xe0/0x130 [ 560.905259] ? __kasan_check_write+0x14/0x20 [ 560.905599] ? up_read+0x1a/0x90 [ 560.905853] ? indx_read+0x22c/0x380 [ 560.906096] indx_find+0x2ef/0x470 [ 560.906352] ? indx_find_buffer+0x2d0/0x2d0 [ 560.906692] ? __kasan_kmalloc+0x88/0xb0 [ 560.906977] dir_search_u+0x196/0x2f0 [ 560.907220] ? ntfs_nls_to_utf16+0x450/0x450 [ 560.907464] ? __kasan_check_write+0x14/0x20 [ 560.907747] ? mutex_lock+0x8f/0xe0 [ 560.907970] ? __mutex_lock_slowpath+0x20/0x20 [ 560.908214] ? kmem_cache_alloc+0x143/0x4b0 [ 560.908459] ntfs_lookup+0xe0/0x100 [ 560.908788] __lookup_slow+0x116/0x220 [ 560.909050] ? lookup_fast+0x1b0/0x1b0 [ 560.909309] ? lookup_fast+0x13f/0x1b0 [ 560.909601] walk_component+0x187/0x230 [ 560.909944] link_path_walk.part.0+0x3f0/0x660 [ 560.910285] ? handle_lookup_down+0x90/0x90 [ 560.910618] ? path_init+0x642/0x6e0 [ 560.911084] ? percpu_counter_add_batch+0x6e/0xf0 [ 560.912559] ? __alloc_file+0x114/0x170 [ 560.913008] path_openat+0x19c/0x1d10 [ 560.913419] ? getname_flags+0x73/0x2b0 [ 560.913815] ? kasan_save_stack+0x3a/0x50 [ 560.914125] ? kasan_save_stack+0x26/0x50 [ 560.914542] ? __kasan_slab_alloc+0x6d/0x90 [ 560.914924] ? kmem_cache_alloc+0x143/0x4b0 [ 560.915339] ? getname_flags+0x73/0x2b0 [ 560.915647] ? getname+0x12/0x20 [ 560.916114] ? __x64_sys_open+0x4c/0x60 [ 560.916460] ? path_lookupat.isra.0+0x230/0x230 [ 560.916867] ? __isolate_free_page+0x2e0/0x2e0 [ 560.917194] do_filp_open+0x15c/0x1f0 [ 560.917448] ? may_open_dev+0x60/0x60 [ 560.917696] ? expand_files+0xa4/0x3a0 [ 560.917923] ? __kasan_check_write+0x14/0x20 [ 560.918185] ? _raw_spin_lock+0x88/0xdb [ 560.918409] ? _raw_spin_lock_irqsave+0x100/0x100 [ 560.918783] ? _find_next_bit+0x4a/0x130 [ 560.919026] ? _raw_spin_unlock+0x19/0x40 [ 560.919276] ? alloc_fd+0x14b/0x2d0 [ 560.919635] do_sys_openat2+0x32a/0x4b0 [ 560.920035] ? file_open_root+0x230/0x230 [ 560.920336] ? __rcu_read_unlock+0x5b/0x280 [ 560.920813] do_sys_open+0x99/0xf0 [ 560.921208] ? filp_open+0x60/0x60 [ 560.921482] ? exit_to_user_mode_prepare+0x49/0x180 [ 560.921867] __x64_sys_open+0x4c/0x60 [ 560.922128] do_syscall_64+0x3b/0x90 [ 560.922369] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.923030] RIP: 0033:0x7f7dff2e4469 [ 560.923681] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 560.924451] RSP: 002b:00007ffd41a210b8 EFLAGS: 00000206 ORIG_RAX: 0000000000000002 [ 560.925168] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7dff2e4469 [ 560.925655] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 00007ffd41a211f0 [ 560.926085] RBP: 00007ffd41a252a0 R08: 00007f7dff60fba0 R09: 00007ffd41a25388 [ 560.926405] R10: 0000000000400b80 R11: 0000000000000206 R12: 00000000004004e0 [ 560.926867] R13: 00007ffd41a25380 R14: 0000000000000000 R15: 0000000000000000 [ 560.927241] </TASK> [ 560.927491] [ 560.927755] Allocated by task 245: [ 560.928409] kasan_save_stack+0x26/0x50 [ 560.929271] __kasan_kmalloc+0x88/0xb0 [ 560.929778] __kmalloc+0x192/0x320 [ 560.930023] indx_read+0x249/0x380 [ 560.930224] indx_find+0x2a2/0x470 [ 560.930695] dir_search_u+0x196/0x2f0 [ 560.930892] ntfs_lookup+0xe0/0x100 [ 560.931115] __lookup_slow+0x116/0x220 [ 560.931323] walk_component+0x187/0x230 [ 560.931570] link_path_walk.part.0+0x3f0/0x660 [ 560.931791] path_openat+0x19c/0x1d10 [ 560.932008] do_filp_open+0x15c/0x1f0 [ 560.932226] do_sys_openat2+0x32a/0x4b0 [ 560.932413] do_sys_open+0x99/0xf0 [ 560.932709] __x64_sys_open+0x4c/0x60 [ 560.933417] do_syscall_64+0x3b/0x90 [ 560.933776] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 560.934235] [ 560.934486] The buggy address belongs to the object at ffff888009497000 [ 560.934486] which belongs to the cache kmalloc-512 of size 512 [ 560.935239] The buggy address is located 56 bytes to the right of [ 560.935239] 512-byte region [ffff888009497000, ffff888009497200) [ 560.936153] [ 560.937326] The buggy address belongs to the physical page: [ 560.938228] page:0000000062a3dfae refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9496 [ 560.939616] head:0000000062a3dfae order:1 compound_mapcount:0 compound_pincount:0 [ 560.940219] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 560.942702] raw: 000fffffc0010200 ffffea0000164f80 dead000000000005 ffff888001041c80 [ 560.943932] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000 [ 560.944568] page dumped because: kasan: bad access detected [ 560.945735] [ 560.946112] Memory state around the buggy address: [ 560.946870] ffff888009497100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 560.947242] ffff888009497180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 560.947611] >ffff888009497200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 560.947915] ^ [ 560.948249] ffff888009497280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 560.948687] ffff888009497300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 54e4570 ] Though we already have some sanity checks while enumerating attributes, resident attribute names aren't included. This patch checks the resident attribute names are in the valid ranges. [ 259.209031] BUG: KASAN: slab-out-of-bounds in ni_create_attr_list+0x1e1/0x850 [ 259.210770] Write of size 426 at addr ffff88800632f2b2 by task exp/255 [ 259.211551] [ 259.212035] CPU: 0 PID: 255 Comm: exp Not tainted 6.0.0-rc6 #37 [ 259.212955] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 259.214387] Call Trace: [ 259.214640] <TASK> [ 259.214895] dump_stack_lvl+0x49/0x63 [ 259.215284] print_report.cold+0xf5/0x689 [ 259.215565] ? kasan_poison+0x3c/0x50 [ 259.215778] ? kasan_unpoison+0x28/0x60 [ 259.215991] ? ni_create_attr_list+0x1e1/0x850 [ 259.216270] kasan_report+0xa7/0x130 [ 259.216481] ? ni_create_attr_list+0x1e1/0x850 [ 259.216719] kasan_check_range+0x15a/0x1d0 [ 259.216939] memcpy+0x3c/0x70 [ 259.217136] ni_create_attr_list+0x1e1/0x850 [ 259.217945] ? __rcu_read_unlock+0x5b/0x280 [ 259.218384] ? ni_remove_attr+0x2e0/0x2e0 [ 259.218712] ? kernel_text_address+0xcf/0xe0 [ 259.219064] ? __kernel_text_address+0x12/0x40 [ 259.219434] ? arch_stack_walk+0x9e/0xf0 [ 259.219668] ? __this_cpu_preempt_check+0x13/0x20 [ 259.219904] ? sysvec_apic_timer_interrupt+0x57/0xc0 [ 259.220140] ? asm_sysvec_apic_timer_interrupt+0x1b/0x20 [ 259.220561] ni_ins_attr_ext+0x52c/0x5c0 [ 259.220984] ? ni_create_attr_list+0x850/0x850 [ 259.221532] ? run_deallocate+0x120/0x120 [ 259.221972] ? vfs_setxattr+0x128/0x300 [ 259.222688] ? setxattr+0x126/0x140 [ 259.222921] ? path_setxattr+0x164/0x180 [ 259.223431] ? __x64_sys_setxattr+0x6d/0x80 [ 259.223828] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.224417] ? mi_find_attr+0x3c/0xf0 [ 259.224772] ni_insert_attr+0x1ba/0x420 [ 259.225216] ? ni_ins_attr_ext+0x5c0/0x5c0 [ 259.225504] ? ntfs_read_ea+0x119/0x450 [ 259.225775] ni_insert_resident+0xc0/0x1c0 [ 259.226316] ? ni_insert_nonresident+0x400/0x400 [ 259.227001] ? __kasan_kmalloc+0x88/0xb0 [ 259.227468] ? __kmalloc+0x192/0x320 [ 259.227773] ntfs_set_ea+0x6bf/0xb30 [ 259.228216] ? ftrace_graph_ret_addr+0x2a/0xb0 [ 259.228494] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.228838] ? ntfs_read_ea+0x450/0x450 [ 259.229098] ? is_bpf_text_address+0x24/0x40 [ 259.229418] ? kernel_text_address+0xcf/0xe0 [ 259.229681] ? __kernel_text_address+0x12/0x40 [ 259.229948] ? unwind_get_return_address+0x3a/0x60 [ 259.230271] ? write_profile+0x270/0x270 [ 259.230537] ? arch_stack_walk+0x9e/0xf0 [ 259.230836] ntfs_setxattr+0x114/0x5c0 [ 259.231099] ? ntfs_set_acl_ex+0x2e0/0x2e0 [ 259.231529] ? evm_protected_xattr_common+0x6d/0x100 [ 259.231817] ? posix_xattr_acl+0x13/0x80 [ 259.232073] ? evm_protect_xattr+0x1f7/0x440 [ 259.232351] __vfs_setxattr+0xda/0x120 [ 259.232635] ? xattr_resolve_name+0x180/0x180 [ 259.232912] __vfs_setxattr_noperm+0x93/0x300 [ 259.233219] __vfs_setxattr_locked+0x141/0x160 [ 259.233492] ? kasan_poison+0x3c/0x50 [ 259.233744] vfs_setxattr+0x128/0x300 [ 259.234002] ? __vfs_setxattr_locked+0x160/0x160 [ 259.234837] do_setxattr+0xb8/0x170 [ 259.235567] ? vmemdup_user+0x53/0x90 [ 259.236212] setxattr+0x126/0x140 [ 259.236491] ? do_setxattr+0x170/0x170 [ 259.236791] ? debug_smp_processor_id+0x17/0x20 [ 259.237232] ? kasan_quarantine_put+0x57/0x180 [ 259.237605] ? putname+0x80/0xa0 [ 259.237870] ? __kasan_slab_free+0x11c/0x1b0 [ 259.238234] ? putname+0x80/0xa0 [ 259.238500] ? preempt_count_sub+0x18/0xc0 [ 259.238775] ? __mnt_want_write+0xaa/0x100 [ 259.238990] ? mnt_want_write+0x8b/0x150 [ 259.239290] path_setxattr+0x164/0x180 [ 259.239605] ? setxattr+0x140/0x140 [ 259.239849] ? debug_smp_processor_id+0x17/0x20 [ 259.240174] ? fpregs_assert_state_consistent+0x67/0x80 [ 259.240411] __x64_sys_setxattr+0x6d/0x80 [ 259.240715] do_syscall_64+0x3b/0x90 [ 259.240934] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.241697] RIP: 0033:0x7fc6b26e4469 [ 259.242647] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 088 [ 259.244512] RSP: 002b:00007ffc3c7841f8 EFLAGS: 00000217 ORIG_RAX: 00000000000000bc [ 259.245086] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc6b26e4469 [ 259.246025] RDX: 00007ffc3c784380 RSI: 00007ffc3c7842e0 RDI: 00007ffc3c784238 [ 259.246961] RBP: 00007ffc3c788410 R08: 0000000000000001 R09: 00007ffc3c7884f8 [ 259.247775] R10: 000000000000007f R11: 0000000000000217 R12: 00000000004004e0 [ 259.248534] R13: 00007ffc3c7884f0 R14: 0000000000000000 R15: 0000000000000000 [ 259.249368] </TASK> [ 259.249644] [ 259.249888] Allocated by task 255: [ 259.250283] kasan_save_stack+0x26/0x50 [ 259.250957] __kasan_kmalloc+0x88/0xb0 [ 259.251826] __kmalloc+0x192/0x320 [ 259.252745] ni_create_attr_list+0x11e/0x850 [ 259.253298] ni_ins_attr_ext+0x52c/0x5c0 [ 259.253685] ni_insert_attr+0x1ba/0x420 [ 259.253974] ni_insert_resident+0xc0/0x1c0 [ 259.254311] ntfs_set_ea+0x6bf/0xb30 [ 259.254629] ntfs_setxattr+0x114/0x5c0 [ 259.254859] __vfs_setxattr+0xda/0x120 [ 259.255155] __vfs_setxattr_noperm+0x93/0x300 [ 259.255445] __vfs_setxattr_locked+0x141/0x160 [ 259.255862] vfs_setxattr+0x128/0x300 [ 259.256251] do_setxattr+0xb8/0x170 [ 259.256522] setxattr+0x126/0x140 [ 259.256911] path_setxattr+0x164/0x180 [ 259.257308] __x64_sys_setxattr+0x6d/0x80 [ 259.257637] do_syscall_64+0x3b/0x90 [ 259.257970] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 259.258550] [ 259.258772] The buggy address belongs to the object at ffff88800632f000 [ 259.258772] which belongs to the cache kmalloc-1k of size 1024 [ 259.260190] The buggy address is located 690 bytes inside of [ 259.260190] 1024-byte region [ffff88800632f000, ffff88800632f400) [ 259.261412] [ 259.261743] The buggy address belongs to the physical page: [ 259.262354] page:0000000081e8cac9 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x632c [ 259.263722] head:0000000081e8cac9 order:2 compound_mapcount:0 compound_pincount:0 [ 259.264284] flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) [ 259.265312] raw: 000fffffc0010200 ffffea0000060d00 dead000000000004 ffff888001041dc0 [ 259.265772] raw: 0000000000000000 0000000080080008 00000001ffffffff 0000000000000000 [ 259.266305] page dumped because: kasan: bad access detected [ 259.266588] [ 259.266728] Memory state around the buggy address: [ 259.267225] ffff88800632f300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 259.267841] ffff88800632f380: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 259.269111] >ffff88800632f400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 259.269626] ^ [ 259.270162] ffff88800632f480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 259.270810] ffff88800632f500: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Signed-off-by: Edward Lo <edward.lo@ambergroup.io> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2f1a6be upstream. The quota assign ioctl can currently run in parallel with a quota disable ioctl call. The assign ioctl uses the quota root, while the disable ioctl frees that root, and therefore we can have a use-after-free triggered in the assign ioctl, leading to a trace like the following when KASAN is enabled: [672.723][T736] BUG: KASAN: slab-use-after-free in btrfs_search_slot+0x2962/0x2db0 [672.723][T736] Read of size 8 at addr ffff888022ec0208 by task btrfs_search_sl/27736 [672.724][T736] [672.725][T736] CPU: 1 PID: 27736 Comm: btrfs_search_sl Not tainted 6.3.0-rc3 #37 [672.723][T736] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [672.727][T736] Call Trace: [672.728][T736] <TASK> [672.728][T736] dump_stack_lvl+0xd9/0x150 [672.725][T736] print_report+0xc1/0x5e0 [672.720][T736] ? __virt_addr_valid+0x61/0x2e0 [672.727][T736] ? __phys_addr+0xc9/0x150 [672.725][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.722][T736] kasan_report+0xc0/0xf0 [672.729][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.724][T736] btrfs_search_slot+0x2962/0x2db0 [672.723][T736] ? fs_reclaim_acquire+0xba/0x160 [672.722][T736] ? split_leaf+0x13d0/0x13d0 [672.726][T736] ? rcu_is_watching+0x12/0xb0 [672.723][T736] ? kmem_cache_alloc+0x338/0x3c0 [672.722][T736] update_qgroup_status_item+0xf7/0x320 [672.724][T736] ? add_qgroup_rb+0x3d0/0x3d0 [672.739][T736] ? do_raw_spin_lock+0x12d/0x2b0 [672.730][T736] ? spin_bug+0x1d0/0x1d0 [672.737][T736] btrfs_run_qgroups+0x5de/0x840 [672.730][T736] ? btrfs_qgroup_rescan_worker+0xa70/0xa70 [672.738][T736] ? __del_qgroup_relation+0x4ba/0xe00 [672.738][T736] btrfs_ioctl+0x3d58/0x5d80 [672.735][T736] ? tomoyo_path_number_perm+0x16a/0x550 [672.737][T736] ? tomoyo_execute_permission+0x4a0/0x4a0 [672.731][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.737][T736] ? __sanitizer_cov_trace_switch+0x54/0x90 [672.734][T736] ? do_vfs_ioctl+0x132/0x1660 [672.730][T736] ? vfs_fileattr_set+0xc40/0xc40 [672.730][T736] ? _raw_spin_unlock_irq+0x2e/0x50 [672.732][T736] ? sigprocmask+0xf2/0x340 [672.737][T736] ? __fget_files+0x26a/0x480 [672.732][T736] ? bpf_lsm_file_ioctl+0x9/0x10 [672.738][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.736][T736] __x64_sys_ioctl+0x198/0x210 [672.736][T736] do_syscall_64+0x39/0xb0 [672.731][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.739][T736] RIP: 0033:0x4556ad [672.742][T736] </TASK> [672.743][T736] [672.748][T736] Allocated by task 27677: [672.743][T736] kasan_save_stack+0x22/0x40 [672.741][T736] kasan_set_track+0x25/0x30 [672.741][T736] __kasan_kmalloc+0xa4/0xb0 [672.749][T736] btrfs_alloc_root+0x48/0x90 [672.746][T736] btrfs_create_tree+0x146/0xa20 [672.744][T736] btrfs_quota_enable+0x461/0x1d20 [672.743][T736] btrfs_ioctl+0x4a1c/0x5d80 [672.747][T736] __x64_sys_ioctl+0x198/0x210 [672.749][T736] do_syscall_64+0x39/0xb0 [672.744][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.756][T736] [672.757][T736] Freed by task 27677: [672.759][T736] kasan_save_stack+0x22/0x40 [672.759][T736] kasan_set_track+0x25/0x30 [672.756][T736] kasan_save_free_info+0x2e/0x50 [672.751][T736] ____kasan_slab_free+0x162/0x1c0 [672.758][T736] slab_free_freelist_hook+0x89/0x1c0 [672.752][T736] __kmem_cache_free+0xaf/0x2e0 [672.752][T736] btrfs_put_root+0x1ff/0x2b0 [672.759][T736] btrfs_quota_disable+0x80a/0xbc0 [672.752][T736] btrfs_ioctl+0x3e5f/0x5d80 [672.756][T736] __x64_sys_ioctl+0x198/0x210 [672.753][T736] do_syscall_64+0x39/0xb0 [672.765][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.769][T736] [672.768][T736] The buggy address belongs to the object at ffff888022ec0000 [672.768][T736] which belongs to the cache kmalloc-4k of size 4096 [672.769][T736] The buggy address is located 520 bytes inside of [672.769][T736] freed 4096-byte region [ffff888022ec0000, ffff888022ec1000) [672.760][T736] [672.764][T736] The buggy address belongs to the physical page: [672.761][T736] page:ffffea00008bb000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x22ec0 [672.766][T736] head:ffffea00008bb000 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [672.779][T736] flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) [672.770][T736] raw: 00fff00000010200 ffff888012842140 ffffea000054ba00 dead000000000002 [672.770][T736] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 [672.771][T736] page dumped because: kasan: bad access detected [672.778][T736] page_owner tracks the page as allocated [672.777][T736] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd2040(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 88 [672.779][T736] get_page_from_freelist+0x119c/0x2d50 [672.779][T736] __alloc_pages+0x1cb/0x4a0 [672.776][T736] alloc_pages+0x1aa/0x270 [672.773][T736] allocate_slab+0x260/0x390 [672.771][T736] ___slab_alloc+0xa9a/0x13e0 [672.778][T736] __slab_alloc.constprop.0+0x56/0xb0 [672.771][T736] __kmem_cache_alloc_node+0x136/0x320 [672.789][T736] __kmalloc+0x4e/0x1a0 [672.783][T736] tomoyo_realpath_from_path+0xc3/0x600 [672.781][T736] tomoyo_path_perm+0x22f/0x420 [672.782][T736] tomoyo_path_unlink+0x92/0xd0 [672.780][T736] security_path_unlink+0xdb/0x150 [672.788][T736] do_unlinkat+0x377/0x680 [672.788][T736] __x64_sys_unlink+0xca/0x110 [672.789][T736] do_syscall_64+0x39/0xb0 [672.783][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.784][T736] page last free stack trace: [672.787][T736] free_pcp_prepare+0x4e5/0x920 [672.787][T736] free_unref_page+0x1d/0x4e0 [672.784][T736] __unfreeze_partials+0x17c/0x1a0 [672.797][T736] qlist_free_all+0x6a/0x180 [672.796][T736] kasan_quarantine_reduce+0x189/0x1d0 [672.797][T736] __kasan_slab_alloc+0x64/0x90 [672.793][T736] kmem_cache_alloc+0x17c/0x3c0 [672.799][T736] getname_flags.part.0+0x50/0x4e0 [672.799][T736] getname_flags+0x9e/0xe0 [672.792][T736] vfs_fstatat+0x77/0xb0 [672.791][T736] __do_sys_newlstat+0x84/0x100 [672.798][T736] do_syscall_64+0x39/0xb0 [672.796][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.790][T736] [672.791][T736] Memory state around the buggy address: [672.799][T736] ffff888022ec0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.805][T736] ffff888022ec0180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.802][T736] >ffff888022ec0200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ^ [672.809][T736] ffff888022ec0280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ffff888022ec0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fix this by having the qgroup assign ioctl take the qgroup ioctl mutex before calling btrfs_run_qgroups(), which is what all qgroup ioctls should call. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAFcO6XN3VD8ogmHwqRk4kbiwtpUSNySu2VAxN8waEPciCHJvMA@mail.gmail.com/ CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2f1a6be upstream. The quota assign ioctl can currently run in parallel with a quota disable ioctl call. The assign ioctl uses the quota root, while the disable ioctl frees that root, and therefore we can have a use-after-free triggered in the assign ioctl, leading to a trace like the following when KASAN is enabled: [672.723][T736] BUG: KASAN: slab-use-after-free in btrfs_search_slot+0x2962/0x2db0 [672.723][T736] Read of size 8 at addr ffff888022ec0208 by task btrfs_search_sl/27736 [672.724][T736] [672.725][T736] CPU: 1 PID: 27736 Comm: btrfs_search_sl Not tainted 6.3.0-rc3 raspberrypi#37 [672.723][T736] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [672.727][T736] Call Trace: [672.728][T736] <TASK> [672.728][T736] dump_stack_lvl+0xd9/0x150 [672.725][T736] print_report+0xc1/0x5e0 [672.720][T736] ? __virt_addr_valid+0x61/0x2e0 [672.727][T736] ? __phys_addr+0xc9/0x150 [672.725][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.722][T736] kasan_report+0xc0/0xf0 [672.729][T736] ? btrfs_search_slot+0x2962/0x2db0 [672.724][T736] btrfs_search_slot+0x2962/0x2db0 [672.723][T736] ? fs_reclaim_acquire+0xba/0x160 [672.722][T736] ? split_leaf+0x13d0/0x13d0 [672.726][T736] ? rcu_is_watching+0x12/0xb0 [672.723][T736] ? kmem_cache_alloc+0x338/0x3c0 [672.722][T736] update_qgroup_status_item+0xf7/0x320 [672.724][T736] ? add_qgroup_rb+0x3d0/0x3d0 [672.739][T736] ? do_raw_spin_lock+0x12d/0x2b0 [672.730][T736] ? spin_bug+0x1d0/0x1d0 [672.737][T736] btrfs_run_qgroups+0x5de/0x840 [672.730][T736] ? btrfs_qgroup_rescan_worker+0xa70/0xa70 [672.738][T736] ? __del_qgroup_relation+0x4ba/0xe00 [672.738][T736] btrfs_ioctl+0x3d58/0x5d80 [672.735][T736] ? tomoyo_path_number_perm+0x16a/0x550 [672.737][T736] ? tomoyo_execute_permission+0x4a0/0x4a0 [672.731][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.737][T736] ? __sanitizer_cov_trace_switch+0x54/0x90 [672.734][T736] ? do_vfs_ioctl+0x132/0x1660 [672.730][T736] ? vfs_fileattr_set+0xc40/0xc40 [672.730][T736] ? _raw_spin_unlock_irq+0x2e/0x50 [672.732][T736] ? sigprocmask+0xf2/0x340 [672.737][T736] ? __fget_files+0x26a/0x480 [672.732][T736] ? bpf_lsm_file_ioctl+0x9/0x10 [672.738][T736] ? btrfs_ioctl_get_supported_features+0x50/0x50 [672.736][T736] __x64_sys_ioctl+0x198/0x210 [672.736][T736] do_syscall_64+0x39/0xb0 [672.731][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.739][T736] RIP: 0033:0x4556ad [672.742][T736] </TASK> [672.743][T736] [672.748][T736] Allocated by task 27677: [672.743][T736] kasan_save_stack+0x22/0x40 [672.741][T736] kasan_set_track+0x25/0x30 [672.741][T736] __kasan_kmalloc+0xa4/0xb0 [672.749][T736] btrfs_alloc_root+0x48/0x90 [672.746][T736] btrfs_create_tree+0x146/0xa20 [672.744][T736] btrfs_quota_enable+0x461/0x1d20 [672.743][T736] btrfs_ioctl+0x4a1c/0x5d80 [672.747][T736] __x64_sys_ioctl+0x198/0x210 [672.749][T736] do_syscall_64+0x39/0xb0 [672.744][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.756][T736] [672.757][T736] Freed by task 27677: [672.759][T736] kasan_save_stack+0x22/0x40 [672.759][T736] kasan_set_track+0x25/0x30 [672.756][T736] kasan_save_free_info+0x2e/0x50 [672.751][T736] ____kasan_slab_free+0x162/0x1c0 [672.758][T736] slab_free_freelist_hook+0x89/0x1c0 [672.752][T736] __kmem_cache_free+0xaf/0x2e0 [672.752][T736] btrfs_put_root+0x1ff/0x2b0 [672.759][T736] btrfs_quota_disable+0x80a/0xbc0 [672.752][T736] btrfs_ioctl+0x3e5f/0x5d80 [672.756][T736] __x64_sys_ioctl+0x198/0x210 [672.753][T736] do_syscall_64+0x39/0xb0 [672.765][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.769][T736] [672.768][T736] The buggy address belongs to the object at ffff888022ec0000 [672.768][T736] which belongs to the cache kmalloc-4k of size 4096 [672.769][T736] The buggy address is located 520 bytes inside of [672.769][T736] freed 4096-byte region [ffff888022ec0000, ffff888022ec1000) [672.760][T736] [672.764][T736] The buggy address belongs to the physical page: [672.761][T736] page:ffffea00008bb000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x22ec0 [672.766][T736] head:ffffea00008bb000 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [672.779][T736] flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) [672.770][T736] raw: 00fff00000010200 ffff888012842140 ffffea000054ba00 dead000000000002 [672.770][T736] raw: 0000000000000000 0000000000040004 00000001ffffffff 0000000000000000 [672.771][T736] page dumped because: kasan: bad access detected [672.778][T736] page_owner tracks the page as allocated [672.777][T736] page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd2040(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 88 [672.779][T736] get_page_from_freelist+0x119c/0x2d50 [672.779][T736] __alloc_pages+0x1cb/0x4a0 [672.776][T736] alloc_pages+0x1aa/0x270 [672.773][T736] allocate_slab+0x260/0x390 [672.771][T736] ___slab_alloc+0xa9a/0x13e0 [672.778][T736] __slab_alloc.constprop.0+0x56/0xb0 [672.771][T736] __kmem_cache_alloc_node+0x136/0x320 [672.789][T736] __kmalloc+0x4e/0x1a0 [672.783][T736] tomoyo_realpath_from_path+0xc3/0x600 [672.781][T736] tomoyo_path_perm+0x22f/0x420 [672.782][T736] tomoyo_path_unlink+0x92/0xd0 [672.780][T736] security_path_unlink+0xdb/0x150 [672.788][T736] do_unlinkat+0x377/0x680 [672.788][T736] __x64_sys_unlink+0xca/0x110 [672.789][T736] do_syscall_64+0x39/0xb0 [672.783][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.784][T736] page last free stack trace: [672.787][T736] free_pcp_prepare+0x4e5/0x920 [672.787][T736] free_unref_page+0x1d/0x4e0 [672.784][T736] __unfreeze_partials+0x17c/0x1a0 [672.797][T736] qlist_free_all+0x6a/0x180 [672.796][T736] kasan_quarantine_reduce+0x189/0x1d0 [672.797][T736] __kasan_slab_alloc+0x64/0x90 [672.793][T736] kmem_cache_alloc+0x17c/0x3c0 [672.799][T736] getname_flags.part.0+0x50/0x4e0 [672.799][T736] getname_flags+0x9e/0xe0 [672.792][T736] vfs_fstatat+0x77/0xb0 [672.791][T736] __do_sys_newlstat+0x84/0x100 [672.798][T736] do_syscall_64+0x39/0xb0 [672.796][T736] entry_SYSCALL_64_after_hwframe+0x63/0xcd [672.790][T736] [672.791][T736] Memory state around the buggy address: [672.799][T736] ffff888022ec0100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.805][T736] ffff888022ec0180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.802][T736] >ffff888022ec0200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ^ [672.809][T736] ffff888022ec0280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [672.809][T736] ffff888022ec0300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fix this by having the qgroup assign ioctl take the qgroup ioctl mutex before calling btrfs_run_qgroups(), which is what all qgroup ioctls should call. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Link: https://lore.kernel.org/linux-btrfs/CAFcO6XN3VD8ogmHwqRk4kbiwtpUSNySu2VAxN8waEPciCHJvMA@mail.gmail.com/ CC: stable@vger.kernel.org # 5.10+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We encountered a kernel call trace issue which was related to ndo_xdp_xmit callback on our i.MX8MP platform. The reproduce steps show as follows. 1. The FEC port (eth0) connects to a PC port, and the PC uses pktgen_sample03_burst_single_flow.sh to generate packets and send these packets to the FEC port. Notice that the script must be executed before step 2. 2. Run the "./xdp_redirect eth0 eth1" command on i.MX8MP, the eth1 interface is the dwmac. Then there will be a call trace issue soon. Please see the log for more details. The root cause is that the NETDEV_XDP_ACT_NDO_XMIT feature is enabled by default, so when the step 2 command is exexcuted and packets have already been sent to eth0, the stmmac_xdp_xmit() starts running before the stmmac_xdp_set_prog() finishes. To resolve this issue, we disable the NETDEV_XDP_ACT_NDO_XMIT feature by default and turn on/off this feature when the bpf program is installed/uninstalled which just like the other ethernet drivers. Call Trace log: [ 306.311271] ------------[ cut here ]------------ [ 306.315910] WARNING: CPU: 0 PID: 15 at lib/timerqueue.c:55 timerqueue_del+0x68/0x70 [ 306.323590] Modules linked in: [ 306.326654] CPU: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 6.4.0-rc1+ #37 [ 306.333277] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 306.338591] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 306.345561] pc : timerqueue_del+0x68/0x70 [ 306.349577] lr : __remove_hrtimer+0x5c/0xa0 [ 306.353777] sp : ffff80000b7c3920 [ 306.357094] x29: ffff80000b7c3920 x28: 0000000000000000 x27: 0000000000000001 [ 306.364244] x26: ffff80000a763a40 x25: ffff0000d0285a00 x24: 0000000000000001 [ 306.371390] x23: 0000000000000001 x22: ffff000179389a40 x21: 0000000000000000 [ 306.378537] x20: ffff000179389aa0 x19: ffff0000d2951308 x18: 0000000000001000 [ 306.385686] x17: f1d3000000000000 x16: 00000000c39c1000 x15: 55e99bbe00001a00 [ 306.392835] x14: 09000900120aa8c0 x13: e49af1d300000000 x12: 000000000000c39c [ 306.399987] x11: 100055e99bbe0000 x10: ffff8000090b1048 x9 : ffff8000081603fc [ 306.407133] x8 : 000000000000003c x7 : 000000000000003c x6 : 0000000000000001 [ 306.414284] x5 : ffff0000d2950980 x4 : 0000000000000000 x3 : 0000000000000000 [ 306.421432] x2 : 0000000000000001 x1 : ffff0000d2951308 x0 : ffff0000d2951308 [ 306.428585] Call trace: [ 306.431035] timerqueue_del+0x68/0x70 [ 306.434706] __remove_hrtimer+0x5c/0xa0 [ 306.438549] hrtimer_start_range_ns+0x2bc/0x370 [ 306.443089] stmmac_xdp_xmit+0x174/0x1b0 [ 306.447021] bq_xmit_all+0x194/0x4b0 [ 306.450612] __dev_flush+0x4c/0x98 [ 306.454024] xdp_do_flush+0x18/0x38 [ 306.457522] fec_enet_rx_napi+0x6c8/0xc68 [ 306.461539] __napi_poll+0x40/0x220 [ 306.465038] net_rx_action+0xf8/0x240 [ 306.468707] __do_softirq+0x128/0x3a8 [ 306.472378] run_ksoftirqd+0x40/0x58 [ 306.475961] smpboot_thread_fn+0x1c4/0x288 [ 306.480068] kthread+0x124/0x138 [ 306.483305] ret_from_fork+0x10/0x20 [ 306.486889] ---[ end trace 0000000000000000 ]--- Fixes: 66c0e13 ("drivers: net: turn on XDP features") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230524125714.357337-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit ffb3322 ] We encountered a kernel call trace issue which was related to ndo_xdp_xmit callback on our i.MX8MP platform. The reproduce steps show as follows. 1. The FEC port (eth0) connects to a PC port, and the PC uses pktgen_sample03_burst_single_flow.sh to generate packets and send these packets to the FEC port. Notice that the script must be executed before step 2. 2. Run the "./xdp_redirect eth0 eth1" command on i.MX8MP, the eth1 interface is the dwmac. Then there will be a call trace issue soon. Please see the log for more details. The root cause is that the NETDEV_XDP_ACT_NDO_XMIT feature is enabled by default, so when the step 2 command is exexcuted and packets have already been sent to eth0, the stmmac_xdp_xmit() starts running before the stmmac_xdp_set_prog() finishes. To resolve this issue, we disable the NETDEV_XDP_ACT_NDO_XMIT feature by default and turn on/off this feature when the bpf program is installed/uninstalled which just like the other ethernet drivers. Call Trace log: [ 306.311271] ------------[ cut here ]------------ [ 306.315910] WARNING: CPU: 0 PID: 15 at lib/timerqueue.c:55 timerqueue_del+0x68/0x70 [ 306.323590] Modules linked in: [ 306.326654] CPU: 0 PID: 15 Comm: ksoftirqd/0 Not tainted 6.4.0-rc1+ #37 [ 306.333277] Hardware name: NXP i.MX8MPlus EVK board (DT) [ 306.338591] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 306.345561] pc : timerqueue_del+0x68/0x70 [ 306.349577] lr : __remove_hrtimer+0x5c/0xa0 [ 306.353777] sp : ffff80000b7c3920 [ 306.357094] x29: ffff80000b7c3920 x28: 0000000000000000 x27: 0000000000000001 [ 306.364244] x26: ffff80000a763a40 x25: ffff0000d0285a00 x24: 0000000000000001 [ 306.371390] x23: 0000000000000001 x22: ffff000179389a40 x21: 0000000000000000 [ 306.378537] x20: ffff000179389aa0 x19: ffff0000d2951308 x18: 0000000000001000 [ 306.385686] x17: f1d3000000000000 x16: 00000000c39c1000 x15: 55e99bbe00001a00 [ 306.392835] x14: 09000900120aa8c0 x13: e49af1d300000000 x12: 000000000000c39c [ 306.399987] x11: 100055e99bbe0000 x10: ffff8000090b1048 x9 : ffff8000081603fc [ 306.407133] x8 : 000000000000003c x7 : 000000000000003c x6 : 0000000000000001 [ 306.414284] x5 : ffff0000d2950980 x4 : 0000000000000000 x3 : 0000000000000000 [ 306.421432] x2 : 0000000000000001 x1 : ffff0000d2951308 x0 : ffff0000d2951308 [ 306.428585] Call trace: [ 306.431035] timerqueue_del+0x68/0x70 [ 306.434706] __remove_hrtimer+0x5c/0xa0 [ 306.438549] hrtimer_start_range_ns+0x2bc/0x370 [ 306.443089] stmmac_xdp_xmit+0x174/0x1b0 [ 306.447021] bq_xmit_all+0x194/0x4b0 [ 306.450612] __dev_flush+0x4c/0x98 [ 306.454024] xdp_do_flush+0x18/0x38 [ 306.457522] fec_enet_rx_napi+0x6c8/0xc68 [ 306.461539] __napi_poll+0x40/0x220 [ 306.465038] net_rx_action+0xf8/0x240 [ 306.468707] __do_softirq+0x128/0x3a8 [ 306.472378] run_ksoftirqd+0x40/0x58 [ 306.475961] smpboot_thread_fn+0x1c4/0x288 [ 306.480068] kthread+0x124/0x138 [ 306.483305] ret_from_fork+0x10/0x20 [ 306.486889] ---[ end trace 0000000000000000 ]--- Fixes: 66c0e13 ("drivers: net: turn on XDP features") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230524125714.357337-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Despite commit 0ad529d ("mptcp: fix possible divide by zero in recvmsg()"), the mptcp protocol is still prone to a race between disconnect() (or shutdown) and accept. The root cause is that the mentioned commit checks the msk-level flag, but mptcp_stream_accept() does acquire the msk-level lock, as it can rely directly on the first subflow lock. As reported by Christoph than can lead to a race where an msk socket is accepted after that mptcp_subflow_queue_clean() releases the listener socket lock and just before it takes destructive actions leading to the following splat: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330 Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89 RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300 RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020 R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880 FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_accept+0x1ae/0x260 net/socket.c:1872 __sys_accept4+0x9b/0x110 net/socket.c:1913 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x20/0x30 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Address the issue by temporary removing the pending request socket from the accept queue, so that racing accept() can't touch them. After depleting the msk - the ssk still exists, as plain TCP sockets, re-insert them into the accept queue, so that later inet_csk_listen_stop() will complete the tcp socket disposal. Fixes: 2a6a870 ("mptcp: stops worker on unaccepted sockets at listener close") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: multipath-tcp/mptcp_net-next#423 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>

commit 511b90e upstream. Despite commit 0ad529d ("mptcp: fix possible divide by zero in recvmsg()"), the mptcp protocol is still prone to a race between disconnect() (or shutdown) and accept. The root cause is that the mentioned commit checks the msk-level flag, but mptcp_stream_accept() does acquire the msk-level lock, as it can rely directly on the first subflow lock. As reported by Christoph than can lead to a race where an msk socket is accepted after that mptcp_subflow_queue_clean() releases the listener socket lock and just before it takes destructive actions leading to the following splat: BUG: kernel NULL pointer dereference, address: 0000000000000012 PGD 5a4ca067 P4D 5a4ca067 PUD 37d4c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 2 PID: 10955 Comm: syz-executor.5 Not tainted 6.5.0-rc1-gdc7b257ee5dd #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:mptcp_stream_accept+0x1ee/0x2f0 include/net/inet_sock.h:330 Code: 0a 09 00 48 8b 1b 4c 39 e3 74 07 e8 bc 7c 7f fe eb a1 e8 b5 7c 7f fe 4c 8b 6c 24 08 eb 05 e8 a9 7c 7f fe 49 8b 85 d8 09 00 00 <0f> b6 40 12 88 44 24 07 0f b6 6c 24 07 bf 07 00 00 00 89 ee e8 89 RSP: 0018:ffffc90000d07dc0 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff888037e8d020 RCX: ffff88803b093300 RDX: 0000000000000000 RSI: ffffffff833822c5 RDI: ffffffff8333896a RBP: 0000607f82031520 R08: ffff88803b093300 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000003e83 R12: ffff888037e8d020 R13: ffff888037e8c680 R14: ffff888009af7900 R15: ffff888009af6880 FS: 00007fc26d708640(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000012 CR3: 0000000066bc5001 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_accept+0x1ae/0x260 net/socket.c:1872 __sys_accept4+0x9b/0x110 net/socket.c:1913 __do_sys_accept4 net/socket.c:1954 [inline] __se_sys_accept4 net/socket.c:1951 [inline] __x64_sys_accept4+0x20/0x30 net/socket.c:1951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Address the issue by temporary removing the pending request socket from the accept queue, so that racing accept() can't touch them. After depleting the msk - the ssk still exists, as plain TCP sockets, re-insert them into the accept queue, so that later inet_csk_listen_stop() will complete the tcp socket disposal. Fixes: 2a6a870 ("mptcp: stops worker on unaccepted sockets at listener close") Cc: stable@vger.kernel.org Reported-by: Christoph Paasch <cpaasch@apple.com> Closes: multipath-tcp/mptcp_net-next#423 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-4-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 12f3519 upstream. This change fixes the following kernel NULL pointer dereference which is reproduced by blktests srp/007 occasionally. BUG: kernel NULL pointer dereference, address: 0000000000000170 PGD 0 P4D 0 Oops: 0002 [raspberrypi#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1H Kdump: loaded Not tainted 6.0.0-rc1+ raspberrypi#37 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qemu.org 04/01/2014 Workqueue: 0x0 (kblockd) RIP: 0010:srp_recv_done+0x176/0x500 [ib_srp] Code: 00 4d 85 ff 0f 84 52 02 00 00 48 c7 82 80 02 00 00 00 00 00 00 4c 89 df 4c 89 14 24 e8 53 d3 4a f6 4c 8b 14 24 41 0f b6 42 13 <41> 89 87 70 01 00 00 41 0f b6 52 12 f6 c2 02 74 44 41 8b 42 1c b9 RSP: 0018:ffffaef7c0003e28 EFLAGS: 00000282 RAX: 0000000000000000 RBX: ffff9bc9486dea60 RCX: 0000000000000000 RDX: 0000000000000102 RSI: ffffffffb76bbd0e RDI: 00000000ffffffff RBP: ffff9bc980099a00 R08: 0000000000000001 R09: 0000000000000001 R10: ffff9bca53ef0000 R11: ffff9bc980099a10 R12: ffff9bc956e14000 R13: ffff9bc9836b9cb0 R14: ffff9bc9557b4480 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9bc97ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000170 CR3: 0000000007e04000 CR4: 00000000000006f0 Call Trace: <IRQ> __ib_process_cq+0xb7/0x280 [ib_core] ib_poll_handler+0x2b/0x130 [ib_core] irq_poll_softirq+0x93/0x150 __do_softirq+0xee/0x4b8 irq_exit_rcu+0xf7/0x130 sysvec_apic_timer_interrupt+0x8e/0xc0 </IRQ> Fixes: ad215aa ("RDMA/srp: Make struct scsi_cmnd and struct srp_request adjacent") Link: https://lore.kernel.org/r/20220831081626.18712-1-yangx.jy@fujitsu.com Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com> Acked-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scx: Rename scx_atropos to scx_rusty

The mlxbf_gige driver encounters a NULL pointer exception in mlxbf_gige_open() when kdump is enabled. The sequence to reproduce the exception is as follows: a) enable kdump b) trigger kdump via "echo c > /proc/sysrq-trigger" c) kdump kernel executes d) kdump kernel loads mlxbf_gige module e) the mlxbf_gige module runs its open() as the the "oob_net0" interface is brought up f) mlxbf_gige module will experience an exception during its open(), something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] SMP CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : __napi_poll+0x40/0x230 sp : ffff800008003e00 x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8 x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000 x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000 x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0 x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398 x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2 x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238 Call trace: 0x0 net_rx_action+0x178/0x360 __do_softirq+0x15c/0x428 __irq_exit_rcu+0xac/0xec irq_exit+0x18/0x2c handle_domain_irq+0x6c/0xa0 gic_handle_irq+0xec/0x1b0 call_on_irq_stack+0x20/0x2c do_interrupt_handler+0x5c/0x70 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x7c/0x80 __setup_irq+0x4c0/0x950 request_threaded_irq+0xf4/0x1bc mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige] mlxbf_gige_open+0x5c/0x170 [mlxbf_gige] __dev_open+0x100/0x220 __dev_change_flags+0x16c/0x1f0 dev_change_flags+0x2c/0x70 do_setlink+0x220/0xa40 __rtnl_newlink+0x56c/0x8a0 rtnl_newlink+0x58/0x84 rtnetlink_rcv_msg+0x138/0x3c4 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x2ec/0x360 netlink_sendmsg+0x278/0x490 __sock_sendmsg+0x5c/0x6c ____sys_sendmsg+0x290/0x2d4 ___sys_sendmsg+0x84/0xd0 __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x54/0x184 do_el0_svc+0x30/0xac el0_svc+0x48/0x160 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Code: bad PC value ---[ end trace 7d1c3f3bf9d81885 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x2870a7a00000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x0,000005c1,a3332a5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The exception happens because there is a pending RX interrupt before the call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires immediately after this request_irq() completes. The RX IRQ handler runs "napi_schedule()" before NAPI is fully initialized via "netif_napi_add()" and "napi_enable()", both which happen later in the open() logic. The logic in mlxbf_gige_open() must fully initialize NAPI before any calls to request_irq() execute. Fixes: f92e186 ("Add Mellanox BlueField Gigabit Ethernet driver") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Link: https://lore.kernel.org/r/20240325183627.7641-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit f7442a6 ] The mlxbf_gige driver encounters a NULL pointer exception in mlxbf_gige_open() when kdump is enabled. The sequence to reproduce the exception is as follows: a) enable kdump b) trigger kdump via "echo c > /proc/sysrq-trigger" c) kdump kernel executes d) kdump kernel loads mlxbf_gige module e) the mlxbf_gige module runs its open() as the the "oob_net0" interface is brought up f) mlxbf_gige module will experience an exception during its open(), something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000000e29a4000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] SMP CPU: 0 PID: 812 Comm: NetworkManager Tainted: G OE 5.15.0-1035-bluefield #37-Ubuntu Hardware name: https://www.mellanox.com BlueField-3 SmartNIC Main Card/BlueField-3 SmartNIC Main Card, BIOS 4.6.0.13024 Jan 19 2024 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : __napi_poll+0x40/0x230 sp : ffff800008003e00 x29: ffff800008003e00 x28: 0000000000000000 x27: 00000000ffffffff x26: ffff000066027238 x25: ffff00007cedec00 x24: ffff800008003ec8 x23: 000000000000012c x22: ffff800008003eb7 x21: 0000000000000000 x20: 0000000000000001 x19: ffff000066027238 x18: 0000000000000000 x17: ffff578fcb450000 x16: ffffa870b083c7c0 x15: 0000aaab010441d0 x14: 0000000000000001 x13: 00726f7272655f65 x12: 6769675f6662786c x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa870b0842398 x8 : 0000000000000004 x7 : fe5a48b9069706ea x6 : 17fdb11fc84ae0d2 x5 : d94a82549d594f35 x4 : 0000000000000000 x3 : 0000000000400100 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000066027238 Call trace: 0x0 net_rx_action+0x178/0x360 __do_softirq+0x15c/0x428 __irq_exit_rcu+0xac/0xec irq_exit+0x18/0x2c handle_domain_irq+0x6c/0xa0 gic_handle_irq+0xec/0x1b0 call_on_irq_stack+0x20/0x2c do_interrupt_handler+0x5c/0x70 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x7c/0x80 __setup_irq+0x4c0/0x950 request_threaded_irq+0xf4/0x1bc mlxbf_gige_request_irqs+0x68/0x110 [mlxbf_gige] mlxbf_gige_open+0x5c/0x170 [mlxbf_gige] __dev_open+0x100/0x220 __dev_change_flags+0x16c/0x1f0 dev_change_flags+0x2c/0x70 do_setlink+0x220/0xa40 __rtnl_newlink+0x56c/0x8a0 rtnl_newlink+0x58/0x84 rtnetlink_rcv_msg+0x138/0x3c4 netlink_rcv_skb+0x64/0x130 rtnetlink_rcv+0x20/0x30 netlink_unicast+0x2ec/0x360 netlink_sendmsg+0x278/0x490 __sock_sendmsg+0x5c/0x6c ____sys_sendmsg+0x290/0x2d4 ___sys_sendmsg+0x84/0xd0 __sys_sendmsg+0x70/0xd0 __arm64_sys_sendmsg+0x2c/0x40 invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x54/0x184 do_el0_svc+0x30/0xac el0_svc+0x48/0x160 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Code: bad PC value ---[ end trace 7d1c3f3bf9d81885 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt Kernel Offset: 0x2870a7a00000 from 0xffff800008000000 PHYS_OFFSET: 0x80000000 CPU features: 0x0,000005c1,a3332a5a Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]--- The exception happens because there is a pending RX interrupt before the call to request_irq(RX IRQ) executes. Then, the RX IRQ handler fires immediately after this request_irq() completes. The RX IRQ handler runs "napi_schedule()" before NAPI is fully initialized via "netif_napi_add()" and "napi_enable()", both which happen later in the open() logic. The logic in mlxbf_gige_open() must fully initialize NAPI before any calls to request_irq() execute. Fixes: f92e186 ("Add Mellanox BlueField Gigabit Ethernet driver") Signed-off-by: David Thompson <davthompson@nvidia.com> Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Link: https://lore.kernel.org/r/20240325183627.7641-1-davthompson@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>

[ Upstream commit 1ff05e7 ] While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

__kernel_map_pages() is a debug function which clears the valid bit in page table entry for deallocated pages to detect illegal memory accesses to freed pages. This function set/clear the valid bit using __set_memory(). __set_memory() acquires init_mm's semaphore, and this operation may sleep. This is problematic, because __kernel_map_pages() can be called in atomic context, and thus is illegal to sleep. An example warning that this causes: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd preempt_count: 2, expected: 0 CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 raspberrypi#37 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800060dc>] dump_backtrace+0x1c/0x24 [<ffffffff8091ef6e>] show_stack+0x2c/0x38 [<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72 [<ffffffff8092bb24>] dump_stack+0x14/0x1c [<ffffffff8003b7ac>] __might_resched+0x104/0x10e [<ffffffff8003b7f4>] __might_sleep+0x3e/0x62 [<ffffffff8093276a>] down_write+0x20/0x72 [<ffffffff8000cf00>] __set_memory+0x82/0x2fa [<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4 [<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a [<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba [<ffffffff80011904>] copy_process+0x72c/0x17ec [<ffffffff80012ab4>] kernel_clone+0x60/0x2fe [<ffffffff80012f62>] kernel_thread+0x82/0xa0 [<ffffffff8003552c>] kthreadd+0x14a/0x1be [<ffffffff809357de>] ret_from_fork+0xe/0x1c Rewrite this function with apply_to_existing_page_range(). It is fine to not have any locking, because __kernel_map_pages() works with pages being allocated/deallocated and those pages are not changed by anyone else in the meantime. Fixes: 5fde3db ("riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support") Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/1289ecba9606a19917bc12b6c27da8aa23e1e5ae.1715750938.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

commit fb1cf08 upstream. __kernel_map_pages() is a debug function which clears the valid bit in page table entry for deallocated pages to detect illegal memory accesses to freed pages. This function set/clear the valid bit using __set_memory(). __set_memory() acquires init_mm's semaphore, and this operation may sleep. This is problematic, because __kernel_map_pages() can be called in atomic context, and thus is illegal to sleep. An example warning that this causes: BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1578 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2, name: kthreadd preempt_count: 2, expected: 0 CPU: 0 PID: 2 Comm: kthreadd Not tainted 6.9.0-g1d4c6d784ef6 #37 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff800060dc>] dump_backtrace+0x1c/0x24 [<ffffffff8091ef6e>] show_stack+0x2c/0x38 [<ffffffff8092baf8>] dump_stack_lvl+0x5a/0x72 [<ffffffff8092bb24>] dump_stack+0x14/0x1c [<ffffffff8003b7ac>] __might_resched+0x104/0x10e [<ffffffff8003b7f4>] __might_sleep+0x3e/0x62 [<ffffffff8093276a>] down_write+0x20/0x72 [<ffffffff8000cf00>] __set_memory+0x82/0x2fa [<ffffffff8000d324>] __kernel_map_pages+0x5a/0xd4 [<ffffffff80196cca>] __alloc_pages_bulk+0x3b2/0x43a [<ffffffff8018ee82>] __vmalloc_node_range+0x196/0x6ba [<ffffffff80011904>] copy_process+0x72c/0x17ec [<ffffffff80012ab4>] kernel_clone+0x60/0x2fe [<ffffffff80012f62>] kernel_thread+0x82/0xa0 [<ffffffff8003552c>] kthreadd+0x14a/0x1be [<ffffffff809357de>] ret_from_fork+0xe/0x1c Rewrite this function with apply_to_existing_page_range(). It is fine to not have any locking, because __kernel_map_pages() works with pages being allocated/deallocated and those pages are not changed by anyone else in the meantime. Fixes: 5fde3db ("riscv: add ARCH_SUPPORTS_DEBUG_PAGEALLOC support") Signed-off-by: Nam Cao <namcao@linutronix.de> Cc: stable@vger.kernel.org Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com> Link: https://lore.kernel.org/r/1289ecba9606a19917bc12b6c27da8aa23e1e5ae.1715750938.git.namcao@linutronix.de Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 1ff05e7 ] While validating node ids in map_benchmark_ioctl(), node_possible() may be provided with invalid argument outside of [0,MAX_NUMNODES-1] range leading to: BUG: KASAN: wild-memory-access in map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) Read of size 8 at addr 1fffffff8ccb6398 by task dma_map_benchma/971 CPU: 7 PID: 971 Comm: dma_map_benchma Not tainted 6.9.0-rc6 #37 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) kasan_report (mm/kasan/report.c:603) kasan_check_range (mm/kasan/generic.c:189) variable_test_bit (arch/x86/include/asm/bitops.h:227) [inline] arch_test_bit (arch/x86/include/asm/bitops.h:239) [inline] _test_bit at (include/asm-generic/bitops/instrumented-non-atomic.h:142) [inline] node_state (include/linux/nodemask.h:423) [inline] map_benchmark_ioctl (kernel/dma/map_benchmark.c:214) full_proxy_unlocked_ioctl (fs/debugfs/file.c:333) __x64_sys_ioctl (fs/ioctl.c:890) do_syscall_64 (arch/x86/entry/common.c:83) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Compare node ids with sane bounds first. NUMA_NO_NODE is considered a special valid case meaning that benchmarking kthreads won't be bound to a cpuset of a given node. Found by Linux Verification Center (linuxtesting.org). Fixes: 65789da ("dma-mapping: add benchmark support for streaming DMA APIs") Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

keylevel closed this as completed Jun 15, 2012

0lxb pushed a commit to 0lxb/rpi_linux that referenced this issue Jan 30, 2024

Merge pull request raspberrypi#37 from sched-ext/atropos_to_userlb

f2ee8d0

scx: Rename scx_atropos to scx_rusty

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Why is the sound driver a loadable module? #37

Why is the sound driver a loadable module? #37

keylevel commented Jun 14, 2012

huceke commented Jun 14, 2012

keylevel commented Jun 14, 2012

asb commented Jun 14, 2012

keylevel commented Jun 15, 2012

Why is the sound driver a loadable module? #37

Why is the sound driver a loadable module? #37

Comments

keylevel commented Jun 14, 2012

huceke commented Jun 14, 2012

keylevel commented Jun 14, 2012

asb commented Jun 14, 2012

keylevel commented Jun 15, 2012