)

Fix the After first bootup(onie-install), the FEATURE table is not present in CONFIG_DB. 
Fix is done by calling config reload.

…M_API_PY3 (#6344)

Remove the build time dependency on SONIC_PLATFORM_API_PY2 and SONIC_PLATFORM_API_PY3 from xcvrd make rule

- Why I did it - Reboot cause prints "Non-Hardware (N/A)" instead of showing the software reboot cause.
The issue is mishandling of hardware reboot cause in determine-reboot-cause script.

- How I did it
Fixed the handling for Non Hardware reboot cause. Ignore if Non-Hardware is present in the hardware_reboot_cause output. Added some code refactoring for simplicity.

- How to verify it - With fix, the hardware reboot cause is ignored (if it is non hw):

**- Why I did it**
I'm updating the jinja2 template to support getting SNMP information from the redis configdb. 
I'm using the format approved here: 
sonic-net/SONiC#718

This will pave the way for us to decrement using the snmp.yml in the future.  
Right now we will still be using both the snmp.yml and configdb to get variable information in order to create the snmpd.conf via the sonic-cfggen tool. 

**- How I did it**
I first updated the SNMP Schema in PR #718 to get that approved as a standardized format. 
Then I verified I could add snmp configs to the configdb using this standard schema.  Once the configs were added to the configdb then I updated the snmpd.conf.j2 file to support the updates via the configdb while still using the variables in the snmp.yml file in parallel.  This way we will have backward compatibility until we can fully migrate to the configdb only. 

By updating the snmpd.conf.j2 template and running the sonic-cfggen tool the snmpd.conf gets generated with using the values in both the configdb and snmp.yml file. 

Co-authored-by: trvanduy <trvanduy@microsoft.com>

…6351)

Enable the notify mode of rsyslogd imfile module used for supervisord
logs in docker container. 

Setup the mode="inotify" when loading imfile, made sure we are are getting 
supervisord logs in host immediately.

Signed-off-by: Abhishek Dosi <abdosi@microsoft.com>

To incldue following changes:

- [ci]: add build for arm64 and armhf (#757)
- Use template hgetall, because we will tune the return types of library functions (#759)
- [syncd] Fix bulk multi attrs for same key db update (#761)

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

- Dynamically change EEPROM driver based on media type.
- Otherwise, EEPROM INFO and DOM INFO might not be fetched properly and will result in erroneous output.

…ebian (#6114)

Sonic devices advertise meaningful system description along with Debian package information.

before the fix:

-------------
admin@sonic:~$ show lldp neighbors
-------------------------------------------------------------------------------
LLDP neighbors:
-------------------------------------------------------------------------------
Interface: Ethernet0, via: LLDP, RID: 3, Time: 0 day, 16:36:30
SysName: sonic
SysDescr: Debian GNU/Linux 9 (stretch) Linux 4.9.0-11-2-amd64 #1 SMP Debian 4.9.189-3+deb9u2 (2019-11-11) x86_64
-------------------------------------------------------------------------------

After the fix:

root@sonic:~# show lldp neighbors Ethernet16
-------------------------------------------------------------------------------
LLDP neighbors:
-------------------------------------------------------------------------------
Interface:    Ethernet16, via: LLDP, RID: 10, Time: 0 day, 00:01:00
    SysName:      sonic
    SysDescr:     SONiC Software Version: SONiC.sonic_upstream_1.0_daily_201130_1501_62-dirty-20201130.203529 - HwSku: Accton-AS7816-64X - Distribution: Debian 10.6 - Kernel: 4.19.0-9-2-amd64
-------------------------------------------------------------------------------

Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>

)

src/sonic-platform-common 9935fca...8664efc (2):

Make sonic_sfp Python2 and Python3 compatible (#157)
[sffbase.py] Fix to make Python 3-compatible (#156)

src/sonic-platform-daemons e6c786b...81318f7 (1):

[psud] Fix issue where PSU Fan info is not updated in State DB (#137)

Fixes #6341

…6364)

* [platform][Nokia]: Add buffers and qos files for config qos reload

   - providing required files

* [platform][armhf]: remove hardcoded disable for Telemetry on armhf

Co-authored-by: Carl Keene <keene@nokia.com>

Updated imfile configuration for supervisord logs for stretch and buster.

…xpected queue causing _brcm_sai_switch_assert () after warm reboot (#6374)

Starting from build (master) 176 the warm reboot on BRCM Platform started to experience syncd crash. Upon further debug by Ying it was determined that the crash was related to the following new change:
[Dynamic buffer calc] Support dynamic buffer calculation (#1338)

Ying also debugged further and found The crash was caused by buffer pool profile setting operation SAI_BUFFER_PROFILE_ATTR_SHARED_DYNAMIC_TH

A case has filed with BRCM while a potential fix was tried by Ying that seems to have addressed this issue and we are making this change available in master branch so that it will allow further feature validation/testing especially in the warm reboot area.
Once an official fix is provided by BRCM, we will then remove this in house fix and apply the official fix.

- How to verify it
Just perform warm reboot with any master code 175 or above you should see this issue or issue the following cmd will also cause the crash: "mmuconfig -p egress_lossy_profile -a 0"

Pass universal_newlines=True parameter to subprocess.Popen(); no longer use .encode('utf-8') on resulting stdout.
This was missed in #5886

Note: I would prefer to use text=True instead of universal_newlines=True, as the former is an alias only available in Python 3 and is more understandable than the latter. However, Even though the setup.py file for this package only specifies Python 3, the LGTM tool finds other Python 2 code in the repo and validates the code as Python 2 code and alerts that text=True is an invalid parameter. Will stick with universal_newlines=True for now. Once all Python code in the repo has been converted to Python 3, I will change all universal_newlines=True to text=True.

Signed-off-by: Danny Allen <daall@microsoft.com>

- Make PDDF code compliant with both Python 2 and Python 3
- Align code with PEP8 standards using autopep8
- Build and install both Python 2 and Python 3 PDDF packages

…ade (#6285)

In scenario where upgrade gets config from minigraph, it could miss tacacs credentials as they are not in minigraph. Hence restore explicitly upon load-minigraph, if present.

- Why I did it
Upon boot, when config migration is required, the switch could load config from minigraph. The config-load from minigraph would wipe off TACACS key and disable login via TACACS, which would disable all remote user access. This change, would re-configure the TACACS if there is a saved copy available.

- How I did it
When config is loaded from minigraph, look for a TACACS credentials back up (tacacs.json) under /etc/sonic/old_config. If present, load the credentials into running config, before config-save is called.

- How to verify it
Remove /etc/sonic/config_db.json and do an image update. Upon reboot, w/o this change, you would not be able ssh in as remote user. You may login as admin and check out, "show tacacs" & "show aaa" to verify that tacacs-key is missing and login is not enabled for tacacs.
With this change applied, remove /etc/sonic/config_db.json, but save tacacs & aaa credentials as tacacs.json in /etc/sonic/. Upon reboot, you should see remote user access possible.

[skip ci]

**- Why I did it**
This PR aims to monitor the running status of each container. Currently the auto-restart feature was enabled. If a critical process exited unexpected, the container will be restarted. If the container was restarted 3 times during 20 minutes, then it will not run anymore unless we cleared the flag using the command `sudo systemctl reset-failed <container_name>` manually. 

**- How I did it**
We will employ Monit to monitor a script. This script will generate the expected running container list and compare it with the current running containers. If there are containers which were expected to run but were not running, then an alerting message will be written into syslog.

**- How to verify it**
I tested this feature on a lab device `str-a7050-acs-3` which has single ASIC and `str2-n3164-acs-3` which has a Multi-ASIC. First I manually stopped a container by running the command `sudo systemctl stop <container_name>`, then I checked whether there was an alerting message in the syslog.

Signed-off-by: Yong Zhao <yozhao@microsoft.com>

* Use 20 and 30 route-map entries instead of 2 and 3 for TSA

* Added support for dynamic "Allow list" default action.

Co-authored-by: Pavel Shirshov <pavel.contrib@gmail.com>

Includes sonic-swss-common commits:
```
71dc350 2021-01-07 | Lower the log level for outdated key for SubscriberStateTable notification (#441) [Qi Luo]
7e40582 2021-01-08 | Add boost dependencies (#442) [Ze Gan]
30a8ddf 2021-01-05 | Change DBConnector::hgetall return type from map to unordered_map (#440) [Qi Luo]
021108d 2021-01-02 | MCLAG Enhancements per HLD sonic-net/SONiC#596 (#405) [Praveen-Brcm]
54996fc 2021-01-02 | Implement ConfigDBConnector and ConfigDBPipeConnector in C++ (#437) [Qi Luo]
8286525 2020-12-27 | Simply refactor DBConnector hgetall() [Qi Luo]
6d1d33b 2020-12-27 | Fix RedisTransactioner: handle empty deque [Qi Luo]
624e0b8 2020-12-26 | Move complex class constructor as explicit, and fix several mistaken copy constructor usage [Qi Luo]
3b983f9 2020-12-30 | [ci]: add timeout to 180 minutes for arm build (#439) [lguohan]
f2e4210 2020-12-29 | Add utility for string and redis (#434) [Ze Gan]
7a885fd 2020-12-29 | [build]: add build check for arm64 and armhf (#436) [lguohan]
47bccc4 2020-12-24 | Add missed vector header to rediscommand.h (#435) [Ze Gan]
```

Bumps [lxml](https://github.com/lxml/lxml) from 4.6.1 to 4.6.2.
- [Release notes](https://github.com/lxml/lxml/releases)
- [Changelog](https://github.com/lxml/lxml/blob/master/CHANGES.txt)
- [Commits](lxml/lxml@lxml-4.6.1...lxml-4.6.2)

Signed-off-by: dependabot[bot] <support@github.com>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>

…try on ARM64 (#6386)

* Enable telemetry for ARM64 by default

* [Centec]Upgrade Centec syncd docker to buster; libjemalloc2 have been installed in docker-base-buster, remove libjemalloc1 from docker-syncd-centec's Dockerfile.j2

Co-authored-by: Gu Xianghong <xgu@centecnetworks.com>

 - Cleanup and Refactor of library internals, logic mostly unchanged.
 - Enhance debugability with `arista dump` and `arista diag` commands.
 - Fix power supply detection issue.

The HLD about MACsec feature is at :

https://github.com/Azure/SONiC/blob/master/doc/macsec/MACsec_hld.md

- How to verify it
This PR doesn't set MACsec container automatically start, You should manually start the container by docker run docker-macsec
wpa_supplicant binary can be found at MACsec container.
This PR depends on the PR, WPA_SUPPLICANT, and The MACsec container will be set as automatically start by later PR.

Signed-off-by: zegan <zegan@microsoft.com>

- (HEAD, github/master) [storyteller] adding a grep wrapper with predefined scenarios (#1349)
- Adding global-timeout, individual command timeout, log files collection (#1249)
- Add FW dump with new SAI implementation (#1338)
- [unit test][pfcwd] Fix tests that require sudo access (#1340)

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

To make the peer switch hostname easily accessible from config DB. Add peer_switch field to DEVICE_METADATA table

Signed-off-by: Lawrence Lee <lawlee@microsoft.com>

Need to add the follow redirection option -L when downloading the package with redirection.

Signed-off-by: Guohan Lu <lguohan@gmail.com>

Fix #119

when parallel build is enable, multiple dpkg-buildpackage
instances are running at the same time. /var/lib/dpkg is shared
by all instances and the /var/lib/dpkg/updates could be corrupted
and cause the build failure.

the fix is to use overlay fs to mount separate /var/lib/dpkg
for each dpkg-buildpackage instance so that they are not affecting
each other.

Signed-off-by: Guohan Lu <lguohan@gmail.com>

…6418)

Server IPv4 loopbacks do not always arrive with /32 prefix, which is a requirement for the MUX_CABLE table in config DB

Signed-off-by: Lawrence Lee <lawlee@microsoft.com>

…debian control dependency (#6420)

Remove executable bit from the service files

… before assignment” error (#6419)

In rare case can see that xcvrd failed due to "UnboundLocalError: local variable 'label_port' referenced before assignment"

Init "label_port" as None at the beginning of the function, to avoid the case that "label_port" not assigned.

…-saiserver-centec and platform-modules (#6423)

Centec syncd have beend upgraded to buster, docker-syncd-centec-rpc do not need generate stretch based docker.

Co-authored-by: Xianghong Gu <xgu@centecnetworks.com>

…ixes (#6416)

fix platform driver breakage due to python3 upgrade and fix load minigraph errors with config load_minigraph -y

**- How I did it**
added python3-smbus to the pmon docker template since the previous was python2 specific 
fixed additional "ord" python2 specific code 
fixed the jinja templates used by qos reload - the template logic required data to be parsed 

**- How to verify it**
run "show platform XXX" commands and verify output
run "sudo config load_minigraph -y" and verify configuration 
run "show interfaces XXX" and verify output 

Co-authored-by: Carl Keene <keene@nokia.com>

…support (#6417)

- Improve random number generation during early Sonic initialization by providing SW updates to Linux entropy value.
- Improve handling of platform In-Band management port

This commit provides the following updates to the Nokia ixs7215 platform

1. The Marvell Armada-38x SOC requires SW assistance to improve the system
   entropy value available early on in the Sonic boot sequence.
2. The Nokia ixs7215 platform does not have a dedicated Out-Of-Band (OOB) mgmt
   port and thus requires additional logic to optionally support configuring
   front panel port 48 as an In-Band mgmt port. This commit provides additional
   logic to manage and maintain the operation of this In-Band mgmt port.

* Fix py3 version changed even version control enabled issue

* Add some comments and simplify the script

* Add the comment to explain how to get the not hooked command

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

Fixed swi-tools code to work with `python3`
Updated the version of swi-tools downloaded by the `sonic-slave-buster/Dockerfile.j2`
Other Dockerfiles still use the `python2` version, though swi-tools is not used within the stretch builder.

…ndle (#6435)

Found test_sfp.py failed due to use a method without importing it.

…ction error fix (#6436)

To include Kernel GP fault seen in *syncd processes:
sonic-net/sonic-swss-common#444

Signed-off-by: Guohan Lu <lguohan@gmail.com>

1. Fixes the missing DPKG file for gbsyncd-vs package
2. Fixes the softlink issue on the Platform-common and ztp package
3. Fixes the PYTHNON_DEBS list is missing for DBG dockers.

Update sonic-linux-kernel pointer to pick up new commits:

- Backport patches to increase critical threshold for ASIC and validate transceiver temperature a7c1af7  sonic-net/sonic-linux-kernel@548e8e0
- [ci]: Set up CI with Azure Pipelines   548e8e0 sonic-net/sonic-linux-kernel@a7c1af7

Signed-off-by: Kebo Liu <kebol@nvidia.com>

…6432)

The only Python code in the SwSS package, restore_neighbors.py, was recently converted to Python 3 and most dependencies were updated as part of #6207. However, the SwSS makefile still listed the Python 2 version of the swsscommon package as a dependency. This caused Python 2-related packages to be installed in containers unnecessarily.

Includes below sonic-snmpagent commits
```
dfde06e 2021-01-13 | Revert "[rfc1213] Interface MIB add l3 vlan interfaces & aggregate rif counters (#169)" (#191) [Stepan Blyshchak]
45edd7e 2021-01-04 | [snmpagent] Fix hardcoded qsfp lane count by reading sensor status from DB (#184) [Junchao-Mellanox]
3b72a6f 2021-01-02 | Fix: handle empty LOC_CHASSIS_TABLE (#190) [Qi Luo]
4aad821 2020-12-29 | [sysName]: Implement sysName OID (#185) [SuvarnaMeenakshi]
8efb4bb 2020-12-29 | [rfc1213] fix counter value type (#189) [Stepan Blyshchak]
025483a 2020-12-23 | [RouteUpdater]: Fix multi_asic mock function implementation and multi_asic variable name (#186) [SuvarnaMeenakshi]
381ae47 2020-12-10 | [mibs] b'VLAN_TABLE:' -> 'VLAN_TABLE' (#181) [Stepan Blyshchak]
e54036c 2020-12-09 | [rfc1213] Interface MIB add l3 vlan interfaces & aggregate rif counters (#169) [Stepan Blyshchak]
fd1eae7 2020-11-24 | Set swsscommon logging level (#178) [Qi Luo]
706d504 2020-11-23 | Improve MockRedis _encode(): so it will work on all types of value (#179) [Qi Luo]
64c93a1 2020-11-16 | [RFC4292][Namespace]: Fix implementation of RouteUpdater for multi-asic platform (#176) [SuvarnaMeenakshi]
b8f19ee 2020-11-12 | [sonic-snmpagent] SONiC physical entity mib extension (#168) [Junchao-Mellanox]
6b94ec3 2020-11-05 | Replace swsssdk.SonicV2Connector with swsscommon.SonicV2Connector (SWIG wrapper of C++ implementation) in production code (#162) [Qi Luo]
```

Signed-off-by: Stepan Blyshchak <stepanb@nvidia.com>
Co-authored-by: Qi Luo <qiluo-msft@users.noreply.github.com>

**- Why I did it**

Prior to SONiC using Debian Buster, we needed to build Python 3.5 or newer from source for installation in the SNMP container, becuase it wasn't available from the Debian repository for Jessie or Stretch. Now that all containers are based on Buster, we simply install Python 3.7 from the Debian repository in the host as well as all containers. We are no longer building Python 3 from source, so the Makefile is unused and we no longer need to install build dependencies in the slave containers.

**- How I did it**

- Remove Python 3 makefile
- No longer install Python 3 build dependencies in the slave containers.

…ge (#6442)

**- Why I did it**

To enable running Pytest unit tests before building the Python 3 sonic-platform-common package

**- How I did it**

- Add Python 3 sonic-config-engine package as a dependency of Python 3 sonic-platform-common package (needed for both runtime and unit tests)
- No longer disable unit tests when building Python 3 sonic-platform-common package

**- Why I did it**
Earlier today we found a bug in the SONiC TSA implementation.
TSC shows incorrect output (see below) in case we have a route-map which contains TSA route-map as a prefix.
```
admin@str-s6100-acs-1:~$ TSC
Traffic Shift Check:
System Mode: Not consistent
```
The reason is that TSC implementation has too loose regexps in TSA utilities, which match wrong route-map entries:
For example, current TSC matches following
```
route-map TO_BGP_PEER_V4 permit 200
route-map TO_BGP_PEER_V6 permit 200
```
But it should match only
```
route-map TO_BGP_PEER_V4 permit 20
route-map TO_BGP_PEER_V4 deny 30
route-map TO_BGP_PEER_V6 permit 20
route-map TO_BGP_PEER_V6 deny 30
```

**- How I did it**
I fixed it by using egrep with `^` and `$` regexp markers which match begin and end of the line.

**- How to verify it**
1. Add follwing entry to FRR config:
```
str-s6100-acs-1# 
str-s6100-acs-1# conf t
str-s6100-acs-1(config)# route-map TO_BGP_PEER_V4 permit 200 
str-s6100-acs-1(config-route-map)# end
```
2. Use the TSC command and check output. It should show normal.
```
admin@str-s6100-acs-1:~$ TSC
Traffic Shift Check:
System Mode: Normal```

…k (CVL) (#5714)

- Why I did it
Management framework (CVL) needs to call lyd_check_mandatory_tree() for validation and hence exported lyd_check_mandatory_tree() as an API.

- How I did it
Added "API" keyword before lyd_check_mandatory_tree() definition.

- How to verify it
There is no functionality code change here and no specific steps to verify it. Management framework (CVL) should be able to call this function and no patching and compilation error should be seen.

- Description for the changelog
Added "API" keyword before export lyd_check_mandatory_tree() function definition.

…6454)

* [warm boot finalizer] only wait for enabled components to reconcile

Define the component with its associated service. Only wait for components that have associated service enabled to reconcile during warm reboot.

Signed-off-by: Ying Xie <ying.xie@microsoft.com>

)

In order to build up device hierachy, PSU and module thermals are no longer child of chassis. PSU thermal belongs to PSU objects and SFP thermals belong to SFP object now. Need align this change in platform.json. Move thermal objects to correct parent device

“time" module was missed to be imported and will cause an error when the branch hit.

Signed-off-by: Kebo Liu <kebol@nvidia.com>

Some non-production minigraphs will have an empty ClusterName tag

Signed-off-by: Lawrence Lee <lawlee@microsoft.com>

#6168)

It's been reported that accton fan monitor process keeps consuming memory after few days.
The amount of memory occupied increases in linear and never leased.

Signed-off-by: roy_lee <roy_lee@edge-core.com>

…6089)

**- Why I did it**
- The thermalctld daemon on the Pmon docker requires support from the thermal manager API.

**- How I did it**
- Removed the old function for detecting a faulty fan.
- Removed the old function for detecting excess temperature.
- Implement thermal_manager APIs based on ThermalManagerBase
- Implement thermal_conditions APIs based on ThermalPolicyConditionBase
- Implement thermal_actions APIs based on ThermalPolicyActionBase
- Implement thermal_info APIs based on ThermalPolicyInfoBase
- Add thermal_policy.json

…ent service (#6465)

**- Why I did it**

On the Mellanox platform, reboot cause is fetched from some certain sysfs which is created by the hw-management service. So determine-reboot-cause service shall start after hw-management, otherwise it could fail due to the related sysfs is not available yet.

**- How I did it**

Add a patch to the hw-management service to make sure determine-reboot-cause service should start after it.

Signed-off-by: Kebo Liu <kebol@nvidia.com>

When building the sonic-slave-buster docker container, the node.js package is
installed to meet the requirements of the Azure DevOPs pipleline
build. Recently this install of node.js has been failing.

This commit fixes that build break by upgrading the
sonic-slave-buster build to install version 14.x of node.js which is the
current LTS version for buster.

…cks (#6457)

Avoid sonic-cfggen crashing when a server does not have a configured loopback address in the minigraph

Signed-off-by: Lawrence Lee <lawlee@microsoft.com>

…ms speeds requirements (#6279)

[DPB][MLNX][YANG] fixed range of max speed

- Why I did it
All Mellanox platforms require DPB modes with a specific set of speeds example

- How I did it
Extended regex pattern inside YANG model.
Supported platforms: SN2010, SN2100, SN2410, SN2700, SN3420, SN3700, SN3700C, SN3800, SN4600C, SN4410, SN4700

- How to verify it
Manually tested DPB CLI on all platform with all modes

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

[DPB] added capability files for SN2700 platform

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN2700

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

NOTE: breakout to 4 is currently not available as of missing functionality in DPB implementation.

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN3800

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN2010

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN2100

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN2410

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

NOTE: breakout to 4 is currently not available as of missing functionality in DPB implementation.

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN3700

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN4410

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

- Why I did it
platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

- How I did it
Created capability files according to platform specification SN4600C

- How to verify it
Full qualification requires bugs fixes reported under sonic-buildimage

NOTE: breakout to 4 is currently not available as of missing functionality in DPB implementation.

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

dump netstat info on error

Signed-off-by: Guohan Lu <lguohan@gmail.com>

use dpkg-buildpackage build with fakeroot

Signed-off-by: Guohan Lu <lguohan@gmail.com>

Signed-off-by: Guohan Lu <lguohan@gmail.com>

Fix #5026

There is a race condition between zebra server accepts connections and bgpd tries to connect. Bgpd has a chance to try to connect before zebra is ready. In this scenario, bgpd will try again after 10 seconds and operate as normal within these 10 seconds. As a consequence, whatever bgpd tries to sent to zebra will be missing in the 10 seconds. To avoid such a scenario, bgpd should start after zebra is ready to accept connections.

Signed-off-by: Guohan Lu <lguohan@gmail.com>

platform.json and hwsku.json files are required for a feature called Dynamic Port Breakout

Signed-off-by: Vadym Hlushko <vadymh@nvidia.com>

* 3b330db4a 2021-01-18 | [build]: Fix build error when compiling for armhf (32-bit) (#30) (HEAD, origin/master, origin/HEAD, master) [dflynn-Nokia]
* 56aaa225b 2021-01-16 | [ci]: add pipeline for armhf and arm64 (#29) [lguohan]
* 90da6141c 2021-01-12 | [ci]: propagate the correct error code the next step (#27) [lguohan]

Signed-off-by: Guohan Lu <lguohan@gmail.com>

[ci]: download artifacts from master branch (#768)
Do not create fabric port if mapping is not available (#769)
[syncd] Comparison logic log also current attr value on set operation (#763)
Add fabric port test to vslib (#737)
[ci]: use sonicbld pool (#766)
[tests] Remove exit command blocking all tests to run (#765)
[vslib]: adapt macsec sai 1.7.1 (#755)
Add support for SAI_SWITCH_ATTR_AVAILABLE_IPMC_ENTRY needed by CRM (#756)

Signed-off-by: Danny Allen <daall@microsoft.com>

- [route_check.py] - update includes checks on subscriptions (sonic-net/sonic-utilities#1344)
- Validations checks while adding a member to PortChannel and removing a member from a Portchannel (sonic-net/sonic-utilities#1328)
- [show] Add subcommand to show midplane status for modular chassis (sonic-net/sonic-utilities#1267)
- [pytest][qos][config] Added pytests for "config qos reload" commands" (sonic-net/sonic-utilities#1346)
- Drop explict 3 seconds pause between two object updates/deletes. (sonic-net/sonic-utilities#1359)
- [show]fix for show muxcable status by replacing "hostname" to "peer_switch" for deriving tor ipv4_address (sonic-net/sonic-utilities#1360)
- [PFCWD] Fix 'start' pfcwd command (sonic-net/sonic-utilities#1345)

Signed-off-by: Shlomi Bitton <shlomibi@nvidia.com>

**- Why I did it**
swsssdk will be deprecated. Migrate sonic-config-engine to use libswsscommon library instead

**- How to verify it**
Unit test

…th prefix to fpmsyncd. (#4806)

Currently FRR is send Prefix with VNI information to FPMSYNCD. This PR allows FRR to send RMAC with EVPN Type5 prefix to fpmsyncd. This is a temp fix. This patch will be removed once neighorch is ready to handle the Prefix and ARP (containing RMAC) separately.

* support reproduceable build for git clone

Signed-off-by: shilongliu <shilongliu@microsoft.com>

* fix

Co-authored-by: shilongliu <shilongliu@microsoft.com>

Changes in this update:
37695c8 [show]: Use TCP Connection For Muxcable Commands (#1371)
8119ba2 Validations checks while creating and deleting a Portchannel (#1326)
3df267e [config] Fix Breakout mode option and BREAKOUT_CFG table check method (#1270)
9bd709b [show] Fix show arp in case with FDB entries, linked to default VLAN (#1357)
bc2d27e [generate_dump]: fix syntax error

signed-of-by: Tamer Ahmed <tamer.ahmed@microsoft.com>

Including below commits:

36f7332 2021-01-14 | modified ERR log to NOTICE log for FDB notification failure after VLAN delete (#1595) [madhanmellanox]
c21c883 2021-01-12 | [ci]: download artifacts from master branch build (#1597) [lguohan]
a1d03a4 2021-01-12 | [fgnhgorch] Match mode changes for Fine Grained ECMP (#1565) [anish-n]
1b65f3d 2021-01-12 | [ci]: use sonicbld pool (#1594) [lguohan]
48ae866 2021-01-12 | [pfcwd] Update PFC storm detection logic for Mellanox platforms (#1586) [Volodymyr Samotiy]
850001f 2021-01-12 | [FPMSYNCD] Evpn/Vxlan related changes to support FRR7.5(#1585) [KISHORE KUNAL]
64ca9bb 2021-01-12 | [ci]: only copy artifacts when build is successful (#1590) [lguohan]
17d0dae 2021-01-11 | [Fdborch] Fix for arm compilation (#1592) [Prince Sunny]
693a02c 2021-01-08 | [gearbox] Add support for "hwinfo" field (#1547) [Baptiste Covolato]
7e3b2c6 2021-01-09 | [Evpn Warmreboot] Added Dependancy check logic in VrfMgr (#1466) [nkelapur]
a960e2e 2021-01-09 | [Orchagent]: FdbOrch changes for EVPN VXLAN (#1275) [Pankaj Jain]
097cfda 2021-01-08 | [swss test] update setup guide for swss tests (#1582) [Ying Xie]
b42253a 2021-01-05 | Fix for armhf build (#1580) [Qi Luo]
d8c1465 2021-01-05 | [dvs] Update/disable DVS tests with new FRR 7.5 behavior (#1579) [Danny Allen]
f6c7422 2021-01-05 | ASIC internal temperature sensors support (#1517) [Santhosh Kumar T]
0aa9ef2 2021-01-01 | Simply by auto iterator type, because we will tune the return types of library functions (#1577) [Qi Luo]
773238b 2020-12-31 | [build]: Fix format string for size_t (#1576) [Qi Luo]
7ba4e43 2020-12-30 | [fgnhgorch] add warm reboot support for fgnhg (#1538) [weixchen1215]
4cf6617 2020-12-30 | [ci]: add build for arm64 and armhf (#1572) [lguohan]
6ebc0ed 2020-12-29 | [ci]: add azure-pipeline for amd64 (#1571) [lguohan]
e32b9d0 2020-12-29 | [FDBSYNCD] Added pytest for fdbsyncd (#1560) [KISHORE KUNAL]
a43f6be 2020-12-30 | [crm] Add support for snat, dnat and ipmc crm resources (#1511) [Prabhu Sreenivasan]
7fc3888 2020-12-29 | PY Test script for EVPN L3 VxLAN (#1330) [Tapash Das]
6eb36d9 2020-12-27 | vlanmgr changes related to EVPN VxLan warmboot (#1460) [anilkpan]

Signed-off-by: Guohan Lu <lguohan@gmail.com>

Update in this change:
640a218 [packaging]: Add Support For Libboost v1.71.0 (#449)

signed-off-by: Tamer Ahmed <tamer.ahmed@microsoft.com>

)

- Why I did it
Initially, we used Monit to monitor critical processes in each container. If one of critical processes was not running
or crashed due to some reasons, then Monit will write an alerting message into syslog periodically. If we add a new process
in a container, the corresponding Monti configuration file will also need to update. It is a little hard for maintenance.

Currently we employed event listener of Supervisod to do this monitoring. Since processes in each container are managed by
Supervisord, we can only focus on the logic of monitoring.

- How I did it
We borrowed the event listener of Supervisord to monitor critical processes in containers. The event listener will take
following steps if it was notified one of critical processes exited unexpectedly:

The event listener will first check whether the auto-restart mechanism was enabled for this container or not. If auto-restart mechanism was enabled, event listener will kill the Supervisord process, which should cause the container to exit and subsequently get restarted.

If auto-restart mechanism was not enabled for this contianer, the event listener will enter a loop which will first sleep 1 minute and then check whether the process is running. If yes, the event listener exits. If no, an alerting message will be written into syslog.

- How to verify it
First, we need checked whether the auto-restart mechanism of a container was enabled or not by running the command show feature status. If enabled, one critical process should be selected and killed manually, then we need check whether the container will be restarted or not.

Second, we can disable the auto-restart mechanism if it was enabled at step 1 by running the commnad sudo config feature autorestart <container_name> disabled. Then one critical process should be selected and killed. After that, we will see the alerting message which will appear in the syslog every 1 minute.

- Which release branch to backport (provide reason below if selected)

 201811
 201911
[x ] 202006

Meet the requirement for the MUX_CABLE table that IPv6 loopbacks have a /128 prefix

Note that this change only affects the MUX_CABLE table, all other tables continue to use the loopback address provided in minigraph.

Signed-off-by: Lawrence Lee <lawlee@microsoft.com>

**- Why I did it**

Ledd is the last daemon that is not enabled to run in python3.
Even though there is a plan to deprecate this daemon and to replace it by something else it's one simple step toward python2 deprecation.

**- How I did it**

Changed the `command=` line for `ledd` in the `supervisord` configuration of `pmon`.
Copied what was done for other daemons.

**- How to verify it**

Booting a product that has a `led_control.py` should now show the ledd running in python3.
I ran `python3 -m pylint` on all `led_control.py` plugin which means that most of them should be python3 compliant.
There is however still a risk that some might not work.

To make BBR configured for peer-group if it's name starts with (prefixed) with the string define in constants.yml instead of exact string match.

Signed-off-by: Arvindsrinivasan Lakshmi Narasimhan arlakshm@microsoft.com

- Why I did it
This PR has the changes to support having different swss.rec and sairedis.rec for each asic.
The logrotate script is updated as well

- How I did it

Update the orchagent.sh script to use the logfile name options in these PRs(sonic-net/sonic-swss#1546 and sonic-net/sonic-sairedis#747)
In multi asic platforms the record files will be different for each asic, with the format swss.asic{x}.rec and sairedis.asic{x}.rec

Update the logrotate script for multiasic platform .

…5774)"

This reverts commit d75c290.

…MMON (#6538)

Otherwise all the docker image derived from docker-config-engine-stretch will have broken SONIC_CONFIG_ENGINE_PY2
The bug is introduced in #6406

Fixes #6445

Because the ipmihelper.py script in the 9332 folder is slightly different than the common one (due to LGTM fixes), when the common one gets copied during build time it causes the workspace/build to become dirty.

Signed-off-by: Danny Allen <daall@microsoft.com>